Saeco HD8915/01 取扱説明書

INCANTO

HD8918, HD8917

HD8916, HD8915

EN

USER MANUAL

4219.460.3913.1 HD8918,17,16,15 SAECO_INCANTO OTC_ROW_COVER_A5_FC.indd 1 02-03-17 17:38

简体中文用户手册

한국어 사용자 설명서

ESPRESSO CAPPUCCINO

ESPRESSO LUNGO LATTE MACCHIATO

AROMA STRENGTH MENU

34

10

9

2

1

3

4

8

7

6

27

25

23

40

41

38

37

30

31

28

12

13

11

19

20

26

5

29

36

15 14

33

32

24

22

21

35

18

16

17

39

Contents

Machine overview_________________________________________________________________ 5

Introduction ______________________________________________________________________ 5

First installation___________________________________________________________________ 6

AquaClean filter __________________________________________________________________ 6

Activating the AquaClean filter_______________________________________________________ 6

Replacing the AquaClean filter_______________________________________________________ 7

Replacing the AquaClean filter after 8 filters were used__________________________________ 8

Measuring the water hardness_______________________________________________________ 8

Control panel and display___________________________________________________________ 9

One-touch beverage buttons________________________________________________________ 9

Navigation buttons________________________________________________________________ 9

MENU button ____________________________________________________________________ 9

AROMA STRENGTH button _________________________________________________________ 10

Brewing coffee____________________________________________________________________ 10

Brewing coffee with beans__________________________________________________________ 10

Brewing coffee with pre-ground coffee________________________________________________ 10

Special drinks and hot water_________________________________________________________ 10

Dispensing hot water_______________________________________________________________ 11

Brewing milk-based coffee beverages and milk froth____________________________________ 11

Beverage types and lengths_________________________________________________________ 12

Beverage types___________________________________________________________________ 12

Beverage lengths__________________________________________________________________ 12

Adjusting volume and taste_________________________________________________________ 12

Adjusting coffee and milk volume____________________________________________________ 12

Adjusting coffee strength___________________________________________________________ 13

Adjusting grinder settings___________________________________________________________ 13

Cleaning and maintenance__________________________________________________________ 14

Cleaning table ____________________________________________________________________ 14

Cleaning the brew group____________________________________________________________ 15

Cleaning the brew group under the tap________________________________________________ 15

Cleaning the brew group with coffee oil remover tablets__________________________________ 15

Reinserting the brew group__________________________________________________________ 16

Lubrication_______________________________________________________________________ 17

Cleaning the milk carafe ____________________________________________________________ 17

Carafe quick clean_________________________________________________________________ 17

Thorough cleaning of the milk carafe__________________________________________________ 18

Weekly cleaning of the milk carafe___________________________________________________ 18

Monthly cleaning of the milk carafe___________________________________________________ 19

Descaling procedure_______________________________________________________________ 20

What to do if the descaling procedure is interrupted_____________________________________ 22

Warning icons and error codes_______________________________________________________ 22

Meaning of the warning icons________________________________________________________ 22

Meaning of the error codes__________________________________________________________ 23

Troubleshooting___________________________________________________________________ 24

4

English

Machine overview

1

User interface 22 Cover of bean hopper

2 ESPRESSO button 23 Bean hopper

3 ESPRESSO LUNGO button 24 Brew group

4 AROMA STRENGTH button 25 Inside of service door with cleaning instructions

5 Standby button 26 Coffee exit duct

6 MENU button 27 Coffee residues drawer

7 LATTE MACCHIATO button 28 Coffee grounds container

8 CAPPUCCINO button 29 Drip tray cover

9 Protection cover 30 Hot water dispensing spout

10 Adjustable coffee dispensing spout 31 Opening for hot water dispensing spout

11 Lid of water tank 32 Water tank

12 Lid of bean hopper 33 Milk container

13 Lid of pre-ground coffee compartment 34 Milk dispensing unit

14 Main switch 35 Lid of milk dispensing unit

15 Socket for cord 36 Milk dispensing spout

16 Service door 37 AquaClean filter

17 'Drip tray full' indicator 38 Water hardness test strip

18 Drip tray 39 Grease tube with application tip

19 Drip tray release button 40 Cleaning brush

20 Cord 41 Measuring scoop

21 Grind setting knob

Introduction

Congratulations on your purchase of a Saeco full-automatic coffee

machine! To fully benefit from the support that Saeco offers, please register

your product at www.saeco.com/care.

To help you get the best out of your coffee machine, Saeco offers full

support in 4 different ways:

-

The separate quick start guide for first installation and first use.

-

This user manual for more detailed information on how to use the

machine, how to keep it clean, how to descale it and how to solve

problems.

5

English

-

This is the QR code. Scan this code to access instruction videos on how

to brew the best coffees, how to clean the machine and for a list of

frequently asked questions. (www.saeco.com/care)

-

The separate booklet with important safety information.

First installation

For first installation, follow the instructions on the separate quick start guide.

Note: This machine has been tested with coffee. Although it has been

carefully cleaned, there may be some coffee residues left. We guarantee,

however, that the machine is absolutely new.

Note: You can install the AquaClean filter during the first installation

procedure (see separate quick start guide). If you skip installation of the

AquaClean filter at first use, you can install it later by entering the menu (see

'Activating the AquaClean filter').

AquaClean filter

The AquaClean filter is designed to reduce limescale deposits in your coffee

machine and provide filtered water to preserve the aroma and flavor of each

cup of coffee. If you use a series of 8 AquaClean filters as indicated in this

user manual, you don't have to descale your machine for up to 5000 cups.

Note: Your machine has to be completely limescale-free before you start to

use the AquaClean filter. If you did not activate the filter during first

installation, you need to descale the machine before you activate the filter.

Activating the AquaClean filter

Note: Always confirm activation of the AquaClean filter in the machine menu

as described below. You also need to do this after replacing the AquaClean

filter. By activating the AquaClean filter in the machine menu, the machine

monitors the number of filters used. When the filter has been replaced 8

times, the machine reminds you to descale it.

1 For instructions on how to place the AquaClean filter in the water tank,

see the separate quick start guide.

Note: Shake the AquaClean filter for about 5 seconds, immerse it upside

down in a jug with cold water and wait until no more air bubbles come

out.

6

English

2 Press the MENU button, select MENU and press the OK button to

confirm. Scroll to AQUACLEAN FILTER. Press the OK button to confirm.

FILTER

0 / 8

AQUA CLEAN

-

The display shows the number of AquaClean filters that have been

installed previously from 0 to 8 filters.

0 / 8

ON

OFF

3 Select ON on the display, press the OK button to confirm.

FILTER

1 / 8

AQUA CLEAN

4 The display automatically updates the number of filters used.

-

Then the 'machine ready' screen appears with the AquaClean 100%

icon to indicate that the filter has been installed.

5 Dispense 2 cups of hot water (0.5 l) to complete the activation. Discard

this water.

Replacing the AquaClean filter

Note: Replace the AquaClean filter as soon as the capacity has dropped to

0% and the filter icon flashes quickly. Replace the AquaClean filter at least

every 3 months, even if the machine has not yet indicated that replacement

is required.

Tip: We advise you to buy a new filter when the capacity has dropped to

10% and the filter icon starts flashing slowly. This ensures that you can

replace the filter when the capacity has dropped to 0%.

1 Take out the AquaClean filter and replace it by a new AquaClean filter

(also see the separate quick start guide).

FILTER

1 / 8

AQUA CLEAN

2 Press the MENU button, scroll to AQUACLEAN FILTER and press the OK

button to confirm.

7

English

FILTER

0%

NEW?

AQUA CLEAN

-

The display asks if you want to activate a new filter.

3 Press the OK button to confirm.

FILTER

2 / 8

AQUA CLEAN

-

The display automatically updates the number of filters used.

4 Dispense 2 cups of hot water (0.5 l) to complete the activation. Discard

this water.

Replacing the AquaClean filter after 8 filters were used

1 When the filter icon starts flashing on the display, press the MENU

button, scroll to AQUACLEAN FILTER and press the OK button to confirm.

DESCALE BEFORE

ACTIVATING FILTER

-

The display tells you that you need to descale the machine before

activating the new filter.

2 Press the OK button to start the descaling procedure (see 'Descaling

procedure').

-

Press the escape button several times to leave the filter menu if you

do not want to descale right away.

3 At the end of the descaling procedure, the display asks you if you want

to install the AquaClean filter.

-

Follow the steps in 'Replacing the AquaClean filter'.

Measuring the water hardness

Note: If you have installed the AquaClean filter, you do not need to set the

water hardness.

To be able to adjust the machine settings to the water in your region, please

measure the water hardness with the water hardness test strip supplied. The

default water hardness of the machine is set to the highest level (4). If the

measured water hardness is different, adjust the setting in the machine

menu.

1 Immerse the water hardness test strip (supplied with the machine) in tap

water for 1 second.

2 Remove the water hardness test strip and and wait for 1 minute.

3 Check how many squares have turned red and check the water hardness

in the table below.

number of red squares

value to be set water hardness

1 very soft water

2 soft water

3 hard water

4 very hard water

8

English

4 Press the MENU button, select menu and scroll to select water hardness.

Select the preferred water hardness setting and press the OK button to

confirm.

Control panel and display

This espresso machine has a self-explaining display for easy use. Read the

sections below for a quick explanation of the buttons.

One-touch beverage buttons

Use the one-touch beverage buttons (ESPRESSO, ESPRESSO LUNGO,

CAPPUCCINO and LATTE MACCHIATO) to quickly prepare one of the preset

beverages.

-

Make sure that the milk carafe is in place and prepared for use when you

select cappuccino or latte macchiato (see the separate quick start guide).

-

If you want to stop the brewing process before the machine has finished

dispensing the preset coffee volume, press the OK button.

-

You can adjust the length of espresso or espresso lungo (see 'Adjusting

coffee and milk volume').

-

After preparing a milk-based beverage, the machine starts the QUICK

CARAFE CLEAN procedure.

Navigation buttons

Some of the one-touch beverage buttons have a double function; use these

buttons to navigate through the menu:

ESPRESSO

ESPRESSO button = Escape

button: press this button to return

to the main menu.

CAPPUCCINO

CAPPUCCINO button = Up button:

press this button to scroll up

through the display menu.

AROMA STRENGTH

AROMA STRENGTH button = OK

button: press this button to select,

confirm or stop a function.

MENU

MENU button = Down button:

press this button to scroll down

through the display menu.

MENU button

Use the MENU button to prepare other drinks, like hot water and frothed

milk. You can also use the MENU button to change the following settings:

-

Display contrast

-

Coffee temperature

-

Stand-by time: this is the time after which the machine goes into standby

mode.

-

Water hardness: to be able to adjust the machine settings to the water in

your region, please measure the water hardness.

-

To activate the AquaClean filter

-

To start descaling

9

English

AROMA STRENGTH button

Use the AROMA STRENGTH button to adjust the coffee strength (see

'Adjusting coffee strength') or to brew pre-ground coffee (see 'Brewing

coffee with pre-ground coffee').

Brewing coffee

Brewing coffee with beans

Caution: Only use espresso beans. Never put ground coffee, unroasted

coffee beans or caramelized coffee beans in the bean hopper, as this may

cause damage to the machine.

To brew coffee, follow the instructions on the separate quick start guide.

To brew two cups of espresso or espresso lungo, press the button of the

desired beverage twice. The machine automatically carries out two grinding

cycles in sequence.

Note: Using the cover of the bean hopper helps to keep the beans fresh.

Brewing coffee with pre-ground coffee

When you brew coffee with pre-ground coffee, use the measuring scoop

supplied to put the correct dose in the pre-ground coffee compartment. Do

not add too much pre-ground coffee to avoid the coffee grounds drawer

from getting clogged.

1 Open the lid of the pre-ground coffee compartment.

2 Pour one measuring scoop of pre-ground coffee into the pre-ground

coffee compartment and close the lid.

Caution: Do not put any other substance than pre-ground coffee in the

pre-ground coffee compartment, as this may damage the machine.

3 Place a cup under the coffee dispensing spout.

4 Press the AROMA STRENGTH button and select the pre-ground coffee

brewing function.

5 Press the ESPRESSO button.

The machine automatically starts brewing the selected beverage.

Note: With pre-ground coffee you can only brew one coffee at a time.

Special drinks and hot water

1 Press the MENU button and select DRINKS.

2 Press the OK button to confirm.

3 Scroll through the menu and select the desired beverage.

10

English

Dispensing hot water

Caution: Steam and hot water may spray out of the hot water dispensing

spout when brewing starts. Wait until brewing has ended before you

remove the hot water dispensing spout.

1 Insert the hot water dispensing spout.

2 Press the MENU button. Select DRINKS, confirm and scroll to select HOT

WATER.

Caution: Only select HOT WATER in the menu when the hot water

dispensing spout is installed.

3 Press the OK button to confirm. The display reminds you to install the hot

water dispensing spout; press the OK button to confirm. The machine

starts dispensing hot water.

4 To stop dispensing hot water, press the OK button.

Brewing milk-based coffee beverages and milk froth

Note: For more information on how to use the milk carafe, read the separate

quick start guide or scan the QR code (see 'Introduction ') to access the

dedicated website for instruction videos.

Caution: Make sure that the milk carafe is installed and the milk

froth dispensing spout is open before you select a milk-based

coffee beverage or milk froth. If the milk carafe is not installed

correctly, steam and hot milk may spray out of the milk froth

dispensing spout.

1 Place a cup under the open milk froth dispensing spout.

2 Choose your milk-based beverage.

-

Press the one-touch CAPPUCCINO or LATTE MACCHIATO button to

brew one of these milk-based beverages right away.

-

Press the MENU button, choose DRINKS and scroll down through the

drinks to select MILK FROTH.

-

The machine reminds you that you have to install the milk carafe and

open the milk froth dispensing spout.

3 The machine first dispenses a preset volume of frothed milk into the cup

or glass and then dispenses a preset volume of coffee.

-

To stop dispensing milk or coffee, press the OK button.

4 After brewing milk-based coffee beverages, the display asks you if you

want to perform the quick clean procedure for the milk carafe. You have

10 seconds to activate the quick clean procedure (see 'Carafe quick

clean'). You can perform the quick clean procedure while leaving the milk

inside the milk carafe. It is recommended to perform the quick clean

procedure at least once a day. Press the OK button to confirm that you

want to perform the quick clean procedure or press the escape button to

perform the quick clean procedure later.

11

English

Beverage types and lengths

Beverage types

Beverage name

Description How to select

Espresso Coffee with thick crema served in a

small cup

One-touch beverage button on

control panel

Espresso Lungo A longer espresso with thick crema

served in a medium-sized cup

One-touch beverage button on

control panel

Cappuccino 1/3 espresso, 1/3 hot milk and 1/3

milk foam served in a large cup

One-touch beverage button on

control panel

Latte Macchiato Long shot of hot milk with foam and

a shot of espresso served in a tall

glass

One-touch beverage button on

control panel

Milk Froth Hot milk with foam MENU/DRINKS

Hot Water MENU/DRINKS

Beverage lengths

Beverage name

Standard length Length range

Espresso 40 ml 20 - 230 ml

Espresso Lungo 80 ml 20 - 230 ml

Hot water 300 ml 50 - 450 ml

Adjusting volume and taste

Adjusting coffee and milk volume

You can adjust the volume of the beverage brewed according to your taste

and to the size of the cups.

Caution: Do not use cups that have a diameter of more than 8cm, to avoid

damage to the front panel.

Note: We advise you to use glass cups or cups with a ceramic-coated rim.

1 To adjust the espresso volume, press and hold the ESPRESSO button

until the display shows the MEMO icon.

-

The machine enters the programming phase and starts to brew the

selected beverage.

2 Press the OK button when the cup contains the desired amount of

espresso.

-

The tick on the display shows that the button is programmed: every

time it is pressed, the machine brews the set espresso volume.

12

English

Note: To set the volume of espresso lungo, cappuccino and latte macchiato,

follow the same procedure: press and hold the button of the beverage and

press the OK button when the cup contains the desired amount. To adjust

the volume of milk-based coffee beverages, first insert the milk carafe and

save the milk volume and then save the coffee volume.

Adjusting coffee strength

To change the coffee strength, press the AROMA STRENGTH button. Each

time you press the AROMA STRENGTH button, the aroma strength changes

by one degree. The display shows the chosen strength, which is only saved

if you brew a coffee.

1

2

3

4

5

1 Very mild

2 Mild

3 Regular

4 Strong

5 Very strong

Note: The machine automatically dispenses the correct coffee volume for

each coffee strength.

Note: You can also use the AROMA STRENGTH button to brew coffee with

pre-ground coffee.

Note: After adjusting the coffee strength, the display shows the main menu

again and saves the chosen aroma strength when you brew a coffee.

Adjusting grinder settings

You can adjust the grinder settings by using the grind setting knob inside the

bean container.

Note: You can only adjust the grind settings when the machine is grinding

coffee beans.

Caution: Do not turn the grind setting knob more than one notch at a time to

prevent damage to the grinder.

1 Place a cup under the coffee dispensing spout.

2 Open the lid of the bean hopper.

3 Press the ESPRESSO button.

1

2

4 When the grinder starts grinding, press down the grind setting knob and

turn it to the left or right.

-

There are 5 different grind settings you can choose from. The lower the

setting, the stronger the coffee.

13

English

Cleaning and maintenance

Note: Consult the table below for when and how to clean all detachable

parts of the machine. For more detailed information on how to clean the

brew group and how to descale the machine, read the corresponding

chapters below or go to the dedicated website www.saeco.com/care.

Cleaning table

Part description

When to clean How to clean

Brew group Weekly Remove the brew group and clean it under the tap

(see 'Cleaning the brew group under the tap').

Depending on the

type of usage

Lubricate the brew group (see 'Lubrication').

Monthly Clean the brew group with the coffee oil remover

tablets.

Milk carafe After every use Perform the QUICK CARAFE CLEAN as indicated on

the machine after preparing a milk-based beverage

(see 'Carafe quick clean').

Daily Clean the milk carafe thoroughly (see 'Thorough

cleaning of the milk carafe').

Weekly Disassemble the milk carafe and clean all parts under

the tap (see 'Weekly cleaning of the milk carafe').

Monthly Use Saeco milk circuit cleaner CA6705 for this

cleaning cycle (see 'Monthly cleaning of the milk

carafe').

Drip tray As soon as the red

'drip tray full' indicator

pops up through the

drip tray.

Empty the drip tray and clean it under the tap.

Coffee grounds

container

When it suits you Empty the coffee grounds container and clean it

under the tap. Make sure the machine is switched on

while you empty and clean the coffee grounds

container.

Water tank When it suits you Clean it under the tap.

14

English

Part description When to clean How to clean

Pre-ground coffee

compartment/coffee

exit duct

Weekly Clean the top part with a spoon handle as shown

below.

Cleaning the brew group

Note: Scan the QR code or go to www.saeco.com/care for detailed

instructions on how to disassemble and clean the brew group.

Caution: Do not clean the brew group in the dishwasher and do not use

washing-up liquid or a cleaning agent to clean it. This may cause the brew

group to malfunction and may have a negative effect on the coffee taste.

Cleaning the brew group under the tap

1 Switch off the machine and unplug it.

2 Remove the drip tray with the coffee grounds container.

3 Open the service door.

2

1

4 Press the PUSH button (1) and pull at the grip of the brew group to

remove it from the machine (2).

5 Rinse the brew group thoroughly with lukewarm water. Clean the upper

filter carefully.

6 Let the brew group air-dry.

Note: Do not dry the brew group with a cloth to prevent fibers from

collecting inside the brew group.

Cleaning the brew group with coffee oil remover tablets

Caution: Only use coffee oil remover tablets for cleaning. They do not

have a descaling function.

1 Place a container under the coffee dispensing spout.

2 Press the AROMA STRENGTH button and select pre-ground coffee.

15

English

3 Put a coffee oil remover tablet in the pre-ground coffee compartment.

4 Press the ESPRESSO LUNGO button. The machine dispenses water from

the coffee dispensing spout.

5 When the progress bar has reached the middle, set the main switch on

the back of the machine to OFF.

6 Let the coffee oil remover solution act for approximately 15 minutes.

7 Set the main switch to ON. Press the standby button.

8 Wait until the machine performs an automatic rinsing cycle.

9 Perform the 'Weekly cleaning of the brew group' procedure.

10 Remove the drip tray with the coffee grounds container. Empty the drip

tray and the coffee grounds container and place them back in the

machine.

11 Press the AROMA STRENGTH button and select pre-ground coffee.

12 Press the ESPRESSO LUNGO button. The machine dispenses water from

the coffee dispensing spout.

13 Repeat steps 12 and 13 twice. Discard the dispensed water.

Reinserting the brew group

1 Before you slide the brew group back into the machine, make sure the

two yellow reference signs on the side match. If they do not match,

perform the following step:

-

Make sure the lever is in contact with the base of the brew group.

2 Make sure that the yellow locking hook of the brew group is in the correct

position.

-

To position the hook correctly, push it upwards until it is in uppermost

position.

16

English

-

The hook is not positioned correctly if it is still in bottommost position.

3 Slide the brew group back into the machine along the guiding rails on the

sides until it locks into position with a click.

Caution: Do not press the PUSH button.

4 Close the service door.

Lubrication

For optimal performance of the machine, you have to lubricate the brew

group. See table below for the lubrication frequency. For support visit our

website: www.saeco.com/care.

Usage frequency

Nr of beverages brewed daily Lubrication frequency

Low 1-5 Every 4 months

Normal 6-10 Every 2 months

Heavy >10 Every month

1 Switch off the appliance and unplug it.

2 Remove the brew group and rinse it under a lukewarm tap (see 'Cleaning

the brew group under the tap').

3 Apply a thin layer of grease around the shaft in the bottom of the brew

group.

4 Apply a thin layer of grease to the rails on both sides (see figure).

5 Reinsert the brew group (see 'Reinserting the brew group').

You can use the grease tube multiple times.

Cleaning the milk carafe

Carafe quick clean

After preparing a milk-based beverage, the carafe cleaning icon appears on

the display.

1 When the carafe cleaning icon appears on the display, press the OK

button if you want to perform a cleaning cycle.

17

English

2 Remove the cup with the beverage and place an empty cup under the

milk dispensing spout.

Note: Make sure the milk dispensing spout is pulled out.

3 Press the OK button to start dispensing hot water.

Thorough cleaning of the milk carafe

To clean the milk carafe thoroughly, you have to do the following regularly:

1 Remove the lid of the milk dispensing unit.

2 Lift the milk dispensing spout out of the milk dispensing unit.

3 Remove the milk tube from the milk dispensing spout.

4 Rinse the milk tube and milk dispensing spout with lukewarm water

thoroughly.

Weekly cleaning of the milk carafe

The milk dispensing spout consists of 5 components. Disassemble all

components once a week and clean them under the tap. You can also clean

all components, except for the milk container, in the dishwasher.

1 2

5

3

4

1 Milk tube

2 Rubber support

3 Milk frother

4 Milk frother connector

5 Housing of milk dispensing spout

Disassembling the milk dispensing spout

1

2

1

1 Press the release buttons on both sides of the top of the milk dispensing

unit (1) and lift the top off the milk container (2).

18

English

2 Turn the milk dispensing unit upside down and hold it firmly in your hand.

Pull the milk tube off the rubber support.

2

1

3 Press the release buttons on the milk frother and remove the milk frother

from the the rubber support.

4 Pull the milk frother connector out of the milk frother.

5 Rinse all components under a lukewarm tap.

Reassembling the milk carafe

1 To reassemble the milk froth dispensing spout, follow steps 2 to 4 of

'Disassembling the milk froth dispensing spout' in reverse order.

2 Place the milk froth dispensing spout back into the top of the milk carafe.

3 Place the top of the milk carafe back onto the milk carafe.

Note: Before you place the milk froth dispensing spout back into the top of

the milk carafe, move the pin inside the top to the correct position. If this pin

is not in the correct position, you cannot place the milk froth dispensing

spout back into the top of the milk carafe.

Monthly cleaning of the milk carafe

Only use SAECO milk circuit cleaner CA6705 for this cleaning cycle.

1 Pour the contents of the milk circuit cleaner sachet in the milk carafe.

Then fill the milk carafe with water up to the MAX level indication.

2 Insert the milk carafe into the machine and place a container under the

milk dispensing spout.

3 Press the MENU button, select DRINKS and scroll to MILK FROTH. Press

the OK button to start dispensing the cleaning solution.

4 Repeat step 3 until the milk carafe is empty.

5 When the carafe is empty, remove the container and the milk carafe from

the machine.

6 Rinse the milk carafe thoroughly and fill it with fresh water up to the MAX

level indication.

7 Insert the milk carafe into the machine.

8 Place the container under the milk dispensing spout.

19

English

ページが読み込まれています...

Saeco HD8915/01 取扱説明書

Saeco HD8915/01 取扱説明書

他の言語で

関連論文

その他のドキュメント