5000 series
Super automatic
espresso machine
EN USER MANUAL
简体中文 用户手册
EP5310
4219.460.4623.1 PHI5000 EP5310 CHINA FRONT-BACK COVER A5 BW.indd 1 04-06-18 13:26
14
13
2
1
4
5
3
11 12
7 6
10
8
9
19
17
18
16
24
22
21
23
25
26
2728
29
30
15
20
1
5 sec.
2
30 sec.
3
4
FILTER
0%
NEW?
AQUA CLEAN
5
FILTER
1 / 8
AQUA CLEAN
6
0 / 8
ON
OFF
7
FILTER
2 / 8
AQUA CLEAN
8
9
Espresso
Aroma strength
Coee
2x
10
11
12
13
14
15
1
2
3
4
5
16
1
2
17
18
19
20
21
22
23
24
25
26
27
28
START
CALC
CLEAN
29
REMOVE
FILTER
30
M
AX
CALC
CLEAN
CALC
CLEAN
1
2
31
English
Contents
IMPORTANT SAFEGUARDS __________________________________________________________________________ 8
Important safety information ________________________________________________________________________ 9
Caution _______________________________________________________________________________________________ 10
Machine overview (Fig. 1)_____________________________________________________________________________ 11
Introduction __________________________________________________________________________________________ 12
First installation_______________________________________________________________________________________ 12
AquaClean filter ______________________________________________________________________________________ 12
Measuring water hardness ___________________________________________________________________________ 14
Using the control panel ______________________________________________________________________________ 14
Brewing drinks ________________________________________________________________________________________ 14
Personalizing drinks __________________________________________________________________________________ 15
Adjusting grinder settings ____________________________________________________________________________ 16
Handling the brew group_____________________________________________________________________________ 16
Cleaning and maintenance __________________________________________________________________________ 17
Cleaning the classic milk frother _____________________________________________________________________ 18
Descaling procedure _________________________________________________________________________________ 19
Warning icons and error codes ______________________________________________________________________ 20
Ordering accessories _________________________________________________________________________________ 21
Troubleshooting ______________________________________________________________________________________ 22
Technical specifications ______________________________________________________________________________ 25
Recycling______________________________________________________________________________________________ 25
Warranty and support _______________________________________________________________________________ 26
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the
following:
1 Read all instructions.
2 Do not touch hot surfaces. Use handles or knobs.
3 To protect against fire, electric shock and injury to persons do not immerse cord, plugs, or
appliance in water or other liquid.
4 Close supervision is necessary when the appliance is used by or near children.
5 Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking
off parts, and before cleaning the appliance.
6 Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or
has been damaged in any manner. Return appliance to the nearest authorized service facility for
examination, repair or adjustment.
7 The use of accessory attachments not recommended by the appliance manufacturer may result in
fire, electric shock or injury to persons.
8 Do not use outdoors.
9 Do not let cord hang over edge of table or counter, or touch hot surfaces.
10 Do not place on or near a hot gas or electric burner, or in a heated oven.
11 Always attach plug to appliance first, then plug cord into wall outlet. To disconnect, turn any
control to “off”, then remove plug from wall outlet.
8
English
12 Do not use appliance for other than intended use.
13 Save these instructions.
This appliance is for household use only. Any servicing, other than cleaning and user maintenance,
should be performed by an authorized service center. Do not immerse machine in water. To reduce
the risk of fire or electric shock, do not disassemble the machine. There are no parts inside the
machine serviceable by the user. Repair should be done by authorized service personnel only.
1 Check voltage to be sure that the voltage indicated on the nameplate corresponds with your
voltage.
2 Never use warm or hot water to fill the water tank. Use cold water only.
3 Keep your hands and the cord away from hot parts of the appliance during operation.
4 Never clean with scrubbing powders or harsh cleaners. Simply use a soft cloth dampened with
water.
5 For optimal taste of your coffee, use purified or bottled water. Periodic descaling is still
recommended every 2-3 months.
6 Do not use caramelized or flavored coffee beans.
Instructions for the power supply cord
-
A short power-supply cord (or detachable power-supply cord) is to be provided to reduce risks
resulting from becoming entangled in or tripping over a longer cord.
-
Longer detachable power-supply cords or extension cords are available and may be used if care is
exercised in their use.
-
If a long detachable power-supply cord or extension cord is used:
1 the marked electrical rating of the detachable power-supply cord or extension cord should be at
least as great as the electrical rating of the appliance.
2 if the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire
cord, and
3 the longer cord should be arranged so that it will not drape over the counter top or table top where
it can be pulled on by children or tripped over.
Important safety information
This machine is equipped with safety features. Nevertheless, read and follow the safety instructions
carefully and only use the machine as described in these instructions, to avoid accidental injury or
damage due to improper use of the machine. Keep this safety booklet for future reference.
Warning
General
-
Check if the voltage indicated on the machine corresponds to the local mains voltage before you
connect the appliance.
-
Connect the machine to an earthed wall socket.
-
Do not let the power cord hang over the edge of a table or worktop and do not let it touch hot
surfaces.
-
To avoid the danger of electric shock, never immerse the machine, mains plug or power cord in
water or any other liquid.
-
Do not pour liquids on the power cord connector.
-
To avoid the danger of burns, keep body parts away from hot water jets produced by the machine.
-
Do not touch hot surfaces. Use handles and knobs.
9
English
-
Switch off the machine with the main switch located on the back (if present) and remove the mains
plug from the wall socket:
-
if a malfunction occurs.
-
if you are not going to use the appliance for a long time.
-
before you clean the machine.
-
Pull at the plug, not at the power cord.
-
Do not touch the mains plug with wet hands.
-
Do not use the machine if the mains plug, the power cord or the machine itself is damaged
-
Do not make any modifications to the machine or its power cord.
-
Only have repairs carried out by a service center authorized by Philips to avoid ahazard
-
The machine should not be used by children.
-
This machine is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the machine by a person responsible for their safety.
-
Cleaning and user maintenance shall not be made by children.
-
Keep the machine and its cord out of the reach of children.
-
Children should be supervised to ensure that they do not play with the machine.
-
Never insert fingers or other objects into the coffee grinder.
-
Be carefull when you dispense hot water. Dispensing may be preceded by small jets of hot water.
Wait until the end of the dispensing cycle before you remove the hot water dispensing spout.
Caution
General
-
This machine is intended for normal household use only. It is not intended for use in environments
such as staff kitchens of shops, offices, farms or other work environments.
-
Always put the machine on a flat and stable surface. Keep it in upright position, also during
transport
-
Do not place the machine on a hotplate or directly next to a hot oven, heater or similar source of
heat.
-
Only put roasted coffee beans in the bean hopper. Putting ground coffee, instant coffee, raw
coffee beans or any other substance in the coffee bean hopper may cause damage to the
machine.
-
Let the machine cool down before you insert or remove any parts. The heating surfaces may retain
residual heat after use.
-
Never fill the water tank with warm, hot or sparkling water, as this may cause damage to the water
tank and the machine.
-
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone
to clean the machine. Simply use a soft cloth dampened with water.
-
Descale your machine regularly. The machine indicates when descaling is needed. Not doing this
will make your machine stop working properly. In this case, repair is not covered by your warranty.
-
Do not keep the machine at temperatures below 0°C/32°F. Water left in the heating system may
freeze and cause damage.
-
Do not leave water in the water tank when you are not going to use the machine for a long period
of time. The water can become contaminated. Use fresh water every time you use the machine.
-
Never use any accessories or parts from other manufacturers or that Philips does not specifically
recommend. If you use such accessories or parts, your guarantee becomes invalid.
10
English
-
Regular cleaning and maintenance prolongs the lifetime of your machine and ensures optimum
quality and taste of your coffee.
-
The machine is exposed continuously to moisture, coffee and scale. Therefore it is very important
to regularly clean and maintain the machine as described in the user manual and shown on the
website. If you do not perform these cleaning and maintenance procedures, your machine
eventually may stop working. In this case repair is not covered by warranty.
-
Do not clean the brew group in the dishwasher and do not use washing-up liquid or a cleaning
agent to clean it. This may cause the brew group to malfunction and may have a negative effect on
the coffee taste.
-
Do not dry the brew group with a cloth to prevent fibers from collecting inside the brew group.
-
Never drink the solution dispensed during the descaling process.
-
Only put preground coffee into the preground coffee compartment. Other substances and objects
may cause severe damage to the machine. In this case, repair is not covered by your warranty.
-
The machine shall not be placed in a cabinet when in use.
Machines with classic milk frother
Warning
-
To avoid the danger of burns, be aware that dispensing may be preceded by small jets of hot
water.
-
Never touch the classic milk frother with bare hands, as it may become very hot. Use the
appropriate protective handle only.
Caution
-
After frothing milk, quickly clean the classic milk frother by dispensing a small quantity of hot water
into a container. Then remove the external part of the classic milk frother and wash it with
lukewarm water.
Electromagnetic fields (EMF)
This machine complies with all applicable standards and regulations regarding exposure to
electromagnetic fields.
Machine overview (Fig. 1)
1
Control panel 16 Brew group
2 Adjustable coffee dispensing spout 17 Inside of service door with contact information
3 Lid of water tank 18 Coffee exit duct
4 Lid of bean hopper 19 Coffee residues drawer
5 Lid of pre-ground coffee compartment 20 Coffee grounds container
6 Main switch 21 Drip tray cover
7 Socket for cord 22 Espresso stand tray
8 Service door 23 Espresso stand cover
9 'Drip tray full' indicator 24 Classic milk frother
11
English
10 Drip tray 25 Water tank
11 Drip tray release button 26 AquaClean filter
12 Cord 27 Grease tube
13 Grind setting knob 28 Measuring scoop
14 Cover of bean hopper 29 Cleaning brush
15 Bean hopper 30 Water hardness test strip
Introduction
Congratulations on your purchase of a Philips full-automatic coffee machine! To fully benefit from the
support that Philips offers, please register your product at www.philips.com/coffee-care.
Read the instruction carefully before you use the machine for the first time and save it for future
reference.
To help you get the best out of your coffee machine, Philips offers full support in 3 different ways:
1 The separate quick start guide for first installation and first use.
2 This user manual for more detailed information.
3 Online support and movies: scan the QR code on the front page or visit www.philips.com/coffee-
care
Note: This machine has been tested with coffee. Although it has been carefully cleaned, there may be
some coffee residues left. We guarantee, however, that the machine is absolutely new.
First installation
To prepare your coffee machine for use, you need to perform a few simple steps such as filling the
water circuit and activating the AquaClean filter. These steps are shown in the separate quick start
guide.
For the best-tasting coffee, you need to brew 5 coffees initially to allow the machine to complete its
self-adjustment.
The machine has been set up to get the best taste out of your coffee beans. Therefore we advise you
not to adjust the grinder settings until you have brewed 100-150 cups (approx. 1 month of usage).
Thoroughly clean LatteGo before first use.
The machine is provided with the espresso stand, with the double function of cup support and extra
drip tray to collect rinsing water.
AquaClean filter
The AquaClean filter is designed to reduce limescale deposits in your coffee machine and provide
filtered water to preserve the aroma and flavor of each cup of coffee. If you use a series of 8
AquaClean filters as indicated by the machine and in this user manual, you don't have to descale your
machine for up to 5000 cups. With each filter you can enjoy up to 625 cups, depending on the
selected coffee varieties and the rinsing and cleaning frequencies.
12
English
Preparing the AquaClean filter for activation
Before you place the AquaClean filter in the water tank, you need to prepare it for use:
1 Shake the filter for about 5 seconds (Fig. 2).
2 Immerse the filter upside down in a jug with cold water for at least 30 seconds and wait until no
more air bubbles come out (Fig. 3).
3 Push the filter onto the filter connection to the lowest possible point (Fig. 4).
Activating the AquaClean filter
You need to activate every new AquaClean filter that you use. By activating the AquaClean filter, the
machine monitors the capacity of the AquaClean filter and the number of filters used. There are 3
ways to activate the AquaClean filter.
1. Activating the AquaClean filter during first installation
After switching on for the first time, the machine guides you through the first installation steps such as
filling the water tank, filling the water circuit and activating the AquaClean filter. Simply follow the
instructions on the screen.
2. Activating the AquaClean filter when prompted
Note: Replace the AquaClean filter as soon as the capacity has dropped to 0% and the filter icon
flashes quickly. Replace the AquaClean filter at least every 3 months, even if the machine has not yet
indicated that replacement is required.
Tip: We advise you to buy a new filter when the capacity has dropped to 10% and the filter icon starts
flashing slowly. This ensures that you can replace the filter when the capacity has dropped to 0%.
1 Press the MENU button, scroll to AQUACLEAN FILTER and press the OK button to confirm.
-
The display asks if you want to activate a new filter (Fig. 5).
2 Press the OK button to confirm.
-
The display automatically updates the number of filters used (Fig. 6).
Note: If you want to replace the AquaClean filter after 8 filters have been used, you first need to
descale the machine. Follow the instructions on the display.
3. Activating the AquaClean filter at any other time
You can start using the AquaClean filter at any time by following the instructions below.
1 Press the MENU button, select MENU and press the OK button to confirm. Scroll to AQUACLEAN
FILTER. Press the OK button ( ) to confirm.
-
The display shows the numbers of AquaClean filters that have been installed previously from 0
to 8 filters (Fig. 6).
2 Select ON on the display and press the OK button (
) to confirm (Fig. 7).
-
The display automatically updates the number of filters used (Fig. 8).
-
Then the 'machine ready' screen appears with the AquaClean 100% icon to indicate that the
filter has been installed (Fig. 9).
3 Dispense 2 cups of hot water (0.5 l) to complete the activation. Discard this water.
Note: In some situations the machine will tell you that you need to descale the machine before you
can install and activate a new AquaClean filter. This is because your machine has to be completely
limescale-free before you start to use the AquaClean filter. Follow the instructions on the screen.
13
English
Measuring water hardness
Use the water hardness test strip supplied to set the water hardness. Press the MENU button, select
MENU and scroll to select WATER HARDNESS.
1 Immerse the water hardness test strip in tap water for 1 second. Then wait for 1 minute.
2 Check how many squares have turned red.
3 Select the appropriate water hardness setting and press the OK button to confirm.
Number of red squares:
Value to be set 1 2 3 4
Using the control panel
Below you find an overview and description of the control panel of the machine. Some of the buttons
have a double function; if applicable the navigation icons appear on the display. Use the buttons next
to this icon to select or confirm your choices.
Use the MENU button to select other drinks and to change settings such as the water hardness and
coffee temperature.
Espresso
Aroma strength
Coee
Menu
Steam
Hot water
2
43
5
1
1. On/off button 4. MENU button
2. One-touch drink buttons 5. Navigation icons (up, down, back, ok)
3. AROMA STRENGTH button
Brewing drinks
You can select a drink by pressing one of the one-touch drink buttons or by selecting another drink in
the menu.
-
If you want to brew two cups, press the one-touch drink button of the selected drink twice (Fig. 10)
or select a coffee drink via the MENU and press it twice. The machine automatically carries out two
grinding cycles in sequence for the selected drink. You can only brew two coffee drinks at the same
time.
-
Slide the dispensing spout up or down to adjust its height to the size of the cup or glass you are
using.
-
When you select AMERICANO, the machine first dispenses coffee and then water.
14
English
Brewing coffee drinks
Brewing coffee with beans
1 Fill the water tank with tap water and fill the bean hopper with beans.
2 To brew a coffee, press one of the one-touch drink buttons. To select another type of coffee, press
the MENU button, select DRINKS, scroll down to the desired drink and press the OK button.
3 To stop dispensing coffee, press the OK button.
Frothing milk (heading only)
Aways use milk coming directly from the fridge for optimal results
Note: We advise you to rinse the water circuit before use. Press the STEAM button to dispense steam
for a few seconds.
1 Fill 1/3 of a jug with cold milk.
2 Insert the classic milk frother into the milk. Press the STEAM button (Fig. 13).
3 Froth the milk by gently swirling the jug and moving it up and down (Fig. 14).
4 Press the OK button to stop frothing.
Brewing coffee with pre-ground coffee
1 Open the lid and pour one measuring scoop of pre-ground coffee into the pre-ground coffee
compartment. Then close the lid (Fig. 12).
2 Place a cup under the coffee dispensing spout. For smaller cups you can use the espresso stand.
3 Press the AROMA STRENGTH button and select the pre-ground coffee brewing function. Press the
ESPRESSO button.
Note: With pre-ground coffee you can only brew one coffee at a time.
Dispensing hot water
Hot water
1 Place a jug under the classic milk frother.
2 Press the HOT WATER button. The machine starts dispensing hot water.
3 To stop dispensing hot water, press the OK button.
Personalizing drinks
Adjusting coffee volume
You can adjust the volume of the coffee brewed according to your taste and to the size of the cups.
We advise you to use glass cups or cups with a ceramic-coated rim.
1 To adjust the espresso volume, press and hold the ESPRESSO button until the display shows the
MEMO icon (Fig. 15).
-
The machine enters the programming phase and starts to brew the selected drink.
2 Press the OK button when the cup contains the desired amount of espresso.
-
The tick on the display shows that the button is programmed: every time it is pressed, the
machine brews the set espresso volume.
15
English
Note: To set the volume of coffee, follow the same procedure: press and hold the button of the
beverage and press the OK button when the cup contains the desired amount. To adjust the volume
of other drinks: select your drink, press and hold the OK button until the display shows the MEMO
icon and then press the OK button again to save the desired volume.
Adjusting coffee strength
-
To change the coffee strength, press the AROMA STRENGTH button.
-
Each time you press the AROMA STRENGTH button, the machine selects a higher aroma strength
setting. There are 5 strengths, 1 is very mild and 5 is very strong. After setting 5, setting 1 is selected
again (Fig. 16).
-
Note: You can also use the AROMA STRENGTH button to brew coffee with pre-ground coffee
-
The display shows the chosen strength. After adjusting the coffee strength, the display shows the
main menu again and saves the chosen aroma strength when you brew a coffee.
Adjusting grinder settings
You can adjust the grinder settings by using the grind setting knob inside the bean container. There
are 5 different grind settings you can choose from. The lower the setting, the stronger the coffee.
Note: You can only adjust the grind settings when the machine is grinding coffee beans. You need to
brew 2 to 3 drinks before you can taste the full difference.
Caution: Do not turn the grind setting knob more than one notch at a time to prevent damage to the
grinder.
1 Place a cup under the coffee dispensing spout.
2 Open the lid of the bean hopper.
3 Press the ESPRESSO button.
4 When the grinder starts grinding, press down the grind setting knob and turn it to the left or right
(Fig. 17).
Handling the brew group
Go to www.philips.com/coffee-care for detailed video instructions on how to remove, insert and
clean the brew group.
Removing the brew group from the machine
1 Switch off the machine by pressing the main switch on the back of the machine.
2 Remove the drip tray with the coffee grounds container.
3 Open the service door (Fig. 18).
4 Press the PUSH button (Fig. 19) and pull at the grip of the brew group to remove it from the
machine (Fig. 20).
5 Remove the coffee residues drawer (Fig. 21).
Reinserting the brew group
Before you slide the brew group back into the machine, make sure it is in the correct position.
1 Check if the arrow on the yellow cylinder on the side of the brew group is aligned with the black
arrow and N.
16
English
-
If they are not aligned, push down the lever until it is in contact with the base of the brew group
(Fig. 23).
2 Make sure that the yellow locking hook on the other side of the brew group is in the correct
position.
-
To position the hook correctly, push it upwards until it is in uppermost position (Fig. 25).
3 Place back the coffee residues drawer.
4 Slide the brew group back into the machine along the guiding rails on the sides until it locks into
position with a click. Do not press the PUSH button.
5 Place back the drip tray with the coffee grounds container.
Cleaning and maintenance
Regular cleaning and maintenance keeps your machine in top condition and ensures good-tasting
coffee for a long time, a steady coffee flow and a perfect milk froth.
Consult the table on when and how to clean all detachable parts of the machine. You can find more
detailed information and video instructions on www.philips.com/coffee-care.
Cleaning table
Part description
When to clean How to clean
Brew group Weekly Remove the brew group and rinse it under the
tap (see 'Cleaning the brew group under the tap').
Monthly Clean the brew group with the Philips coffee oil
remover tablet (see 'Cleaning the brew group
with the coffee oil remover tablets'). Go to
www.philips.com/coffee-care for detailed video
instructions.
Lubrication of the
brew group
Depending on the type of
usage. Consult the
lubrication table (see
'Lubricating the brew group').
Lubricate the brew group with the Philips grease.
Go to www.philips.com/coffee-care for detailed
video instructions.
Classic milk frother After every use Rinse with fresh water (see 'Daily cleaning of
classic milk frother')
Weekly Disassemble the classic milk frother and clean all
parts under the tap (see 'Weekly cleaning of
classic milk frother and steam wand')
Drip tray Empty the drip tray as soon
as the red 'drip tray full'
indicator pops up through
the drip tray. Clean the drip
tray when it suits you.
Remove the drip tray and rinse it under the tap
with some washing-up liquid.
Coffee grounds
container
Empty the coffee grounds
container when prompted by
the machine. Clean it when it
suits you.
Remove the coffee grounds container while the
machine is switched on and rinse it under the tap
with some washing-up liquid.
Water tank When it suits you. Rinse the water tank under the tap
17
English
Part description When to clean How to clean
Coffee funnel Check the coffee funnel
weekly to see if it is clogged.
Unplug the machine and remove the brew group.
Open the lid of the pre-ground coffee
compartment and insert the spoon handle into
the coffee funnel. Move the handle up and down
until the clogged ground coffee falls down (Fig.
26). Go to www.philips.com/coffee-care for
detailed video instructions.
Espresso stand Daily Empty the espresso stand and clean it under the
tap or in the dishwasher.
Tip: There is a cleaning calender on the last page of this user manual. Write down the dates on which
you have performed a cleaning action.
Cleaning the brew group
Regular cleaning of the brew group prevents coffee residues from clogging up the internal circuits.
Visit www.philips.com/coffee-care for support videos on how to remove, insert and clean the brew
group.
Cleaning the brew group under the tap
1 Remove the brew group and the coffee residues drawer.
2 Rinse the coffee residues drawer and the brew group thoroughly with water. Carefully clean the
upper filter (Fig. 24) of the brew group.
3 Let the brew group air-dry before you place it back. Do not dry the brew group with a cloth to
prevent fibers from collecting inside the brew group.
Cleaning the brew group with the coffee oil remover tablets
Only use Phillips Saeco coffee oil remover tablets. Follow the instructions given in the user manual
that comes with the coffee oil remover tablets.
Lubricating the brew group
Lubricate the brew group regularly to ensure that the moving parts continue to move smoothly. See
the table below for the lubrication frequency. Visit www.philips.com/coffee-care for detailed video
instructions.
Usage frequency
Nr of drinks brewed daily Lubrication frequency
Low 1-5 Every 4 months
Normal 6-10 Every 2 months
Heavy >10 Every month
Cleaning the classic milk frother
Daily cleaning of classic milk frother
Remove the external part of the classic milk frother and rinse it with fresh water.
18
English
Weekly cleaning of classic milk frother and steam wand
1 Remove the external part of the classic milk frother and rinse it with fresh water (Fig. 27).
2 Remove the upper part of the classic milk frother from the steam wand and rinse it with fresh water
(Fig. 28).
3 Clean the steam wand with a wet cloth.
4 Reassemble all the classic milk frother parts.
Descaling procedure
When the display shows START CALC CLEAN, you need to descale the machine. If you do not descale
the machine when this message appears on the display, the machine will eventually stop working
properly. In that case, repairs are not covered by the warranty.
Please use Philips descaler only. Under no circumstances should you use a descaler based on sulfuric
acid, hydrochloric acid, sulfamic or acetic acid (vinegar) as this may damage the water circuit in your
machine and not dissolve the limescale properly. Not using the Philips descaler will void your
warranty. Failure to descale the appliance will also void your warranty. You can buy Philips descaling
solution in the online shop at www.philips.com/coffee-care.
The descaling procedure lasts 30 minutes and consists of a descaling cycle and a rinsing cycle. You
can pause the descaling or rinsing cycle by pressing the escape button. To continue the descaling or
rinsing cycle, press the OK button.
Note: Do not remove the brew group during the descaling procedure.
Warning: Do not drink the descaling solution or the water dispensed during the
descaling procedure.
1 Remove the drip tray and the coffee grounds container, empty and clean them and put them back
into place.
2 Remove the external part of the classic milk frother.
3 Place a large container (1.5 l) under the coffee dispensing spout and the classic milk frother.
4 When the display shows START CALC CLEAN (Fig. 29), press the OK button to start the descaling
procedure. Remove the hot water dispensing spout if present.
The display reminds you that you have to remove the AquaClean filter (Fig. 30).
Note: You can press the escape button to skip descaling. If you want to start the descaling
procedure later, press the MENU button, select MENU and scroll to select DESCALING. Press OK to
confirm.
5 Pour the descaling solution into the water tank. Fill the water tank with fresh water up to the CALC
CLEAN level indication (Fig. 31). Place the water tank back into the machine. Press the OK button to
confirm.
-
The first phase of the descaling procedure starts. The machine starts dispensing the descaling
solution at intervals.
-
The display shows the descaling icon, the phase indication and the duration. This first phase
takes 20 minutes.
6 Let the machine dispense the descaling solution until the water tank is empty.
7 Remove the water tank and rinse it.
8 Fill the water tank with fresh water up to the CALC CLEAN level indication. Place the water tank
back in the machine and press OK.
9 Remove and empty the container and place it back under the coffee dispensing spout. Press OK to
confirm.
19
English
10 The second phase of the descaling procedure starts, which is the rinsing cycle. This phase takes 3
minutes. The display shows the rinsing icon and the duration of the phase.
Note: If the water tank is not filled up to the CALC CLEAN level, the machine may require another
rinsing cycle.
11 Wait until the machine stops dispensing water. The descaling procedure is finished when the tick
appears on the display.
12 Press the OK button to exit the descaling procedure. The machine starts heating up and performs
the automatic rinsing cycle.
13 Remove and empty the container.
14 Clean the classic milk frother after descaling (see 'Weekly cleaning of classic milk frother and steam
wand ').
15 Clean the brew group (see 'Cleaning the brew group under the tap').
16 Install a new AquaClean filter in the water tank.
Tip: Using the AquaClean filter reduces the need for descaling!
What to do if the descaling procedure is interrupted
You can exit the descaling procedure by pressing the on/off button on the control panel. If the
descaling procedure is interrupted before it is completely finished, do the following:
1 Empty and rinse the water tank thoroughly.
2 Fill the water tank with fresh water up to the CALC CLEAN level indication and switch the machine
back on. The machine will heat up and perform an automatic rinsing cycle.
3 Before brewing any drinks, perform a manual rinsing cycle. To perform a manual rinsing cycle, first
dispense half a water tank of hot water and then brew 2 cups of pre-ground coffee without adding
ground coffee.
Note: If the descaling procedure was not completed, the machine will require another descaling
procedure as soon as possible.
Warning icons and error codes
Meaning of the warning icons
ADD WATER
Fill the water tank with fresh
water to the MAX level
indication.
The brew group is blocked by
coffee powder. Clean the brew
group.
ADD COFFEE
The bean hopper is empty.
Put new coffee beans in the
bean hopper.
Insert the drip tray andclose
the service door.
The brew group is not in the
machine or it is not inserted
correctly. Insert the brew
group.
10
xx
If the display shows an error
code, check section 'Meaning
of the error codes' to see what
the code on the display means
and what you can do. The
machine cannot be used when
this icon is on the display.
20
English
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
