Shure Bluetooth Earphones SE215-BT1 は、遮音性とワイヤレス接続の両方を提供するイヤホンです。人間工学に基づいた快適なデザインで、長時間使用しても疲れにくくなっています。また、内蔵マイクとリモコンにより、通話や音楽の再生を簡単に操作できます。
SE215-BT1 は、Bluetooth 4.1に対応しており、スマートフォンやタブレットなどのデバイスとワイヤレスで接続できます。最大10メートルの範囲で、安定したワイヤレス接続を実現します。また、バッテリーは最大8時間の連続再生が可能で、長時間使用しても安心です。
SE215-BT1 は、遮音性にも優れており、周囲のノイズを最大37dBまで低減します。これにより、音楽や通話をよりクリアに楽しむことができます。また、イヤーピースは交換可能で、自分に合ったサイズを選ぶことができます。
SE215
Shure Bluetooth Earphones SE215-BT1 は、遮音性とワイヤレス接続の両方を提供するイヤホンです。人間工学に基づいた快適なデザインで、長時間使用しても疲れにくくなっています。また、内蔵マイクとリモコンにより、通話や音楽の再生を簡単に操作できます。
SE215-BT1 は、Bluetooth 4.1に対応しており、スマートフォンやタブレットなどのデバイスとワイヤレスで接続できます。最大10メートルの範囲で、安定したワイヤレス接続を実現します。また、バッテリーは最大8時間の連続再生が可能で、長時間使用しても安心です。
SE215-BT1 は、遮音性にも優れており、周囲のノイズを最大37dBまで低減します。これにより、音楽や通話をよりクリアに楽しむことができます。また、イヤーピースは交換可能で、自分に合ったサイズを選ぶことができます。
SE215
SE215-BT1
Shure Bluetooth Earphones
®
The Shure sound isolating Bluetooth earphones, SE215-BT1, user guide.
Version: 2 (2019-I)
Shure Incorporated
2/12
Table of Contents
SE215-BT1Shure Bluetooth® Earphones 3
Wearing the Earphones 3
Inserting the Earphones 3
Removing the Earphones 4
Changing Sleeves 5
Choosing a Sleeve 5
Cleaning the Nozzle 5
Maintenance and Cleaning 6
Bluetooth Pairing 6
Using the Remote 7
The Center Button 7
Up and Down Buttons 7
Charging the Earphones 8
Specifications 8
Bluetooth Specifications 8
Accessories 9
Safety Information 9
WARNING 9
Information to the user 9
Certifications 12
Shure Incorporated
3/12
SE215-BT1
Shure Bluetooth Earphones
Wearing the Earphones
The following are some suggested ways of wearing the earphones.
Inserting the Earphones
Insert the earphones so they form a tight seal. The fit of the earphone can greatly affect sound quality.
®
Shure Incorporated
4/12
Important: If there seems to be a lack of low frequency response (bass), this means that the earphone sleeve is not forming a tight seal. Gently push the ear
phone deeper into the ear canal or try a different sleeve.
Warning: Do not push the earphone sleeve beyond the ear canal opening.
Removing the Earphones
Grasp the body of earphone and gently twist to remove.
Note: Do not pull on cable to remove earphone.
Shure Incorporated
5/12
•
•
Changing Sleeves
Twist and pull to remove the sleeve from the nozzle.
Slide on a new sleeve so that it completely covers the barb and the nozzle.
Caution: If the barb or any of the nozzle is exposed, the sleeve is not properly installed. Replace sleeves if they do not tightly grip the nozzle. To ensure proper
fit and performance, use only sleeves supplied by Shure (unless using custom molded sleeves).
Choosing a Sleeve
Soft flex sleeves are included in small, medium, and large sizes. Select an earphone sleeve that provides the best fit and
sound isolation. It should be easy to insert, fit comfortably, and easy to remove.
Soft Flex Sleeves
Shure Incorporated
6/12
•
•
•
•
•
•
Cleaning the Nozzle
If you notice a change in sound quality, remove the sleeve and check the nozzle of your earphone. If nozzle is blocked, clear
obstruction by using wire loop end of cleaning tool.
Warning: The cleaning tool is only to be used to clean the earphones. Any other use, such as using the tool to clean ears, could result in injury.
Maintenance and Cleaning
Careful maintenance ensures a tight seal between the sleeve and nozzle, improving sound quality and product safety.
Keep the earphones and sleeves as clean and dry as possible.
To clean sleeves, remove them from earphones, gently rinse in warm water and air dry. Foam sleeves require a longer
drying time. Inspect for damage and replace if necessary. Ear sleeves must be completely dry before reusing.
Wipe the earphones and sleeves with mild antiseptic to avoid infections. Do not use alcohol-based disinfectants.
Do not expose earphones to extreme temperatures.
Replace sleeves if they do not fit properly.
Do not attempt to modify this product. Doing so will void the warranty and could result in personal injury and/or product
failure.
Shure Incorporated
7/12
1.
2.
3.
Bluetooth Pairing
Turn off the earphones. Press and hold center button on earphone remote until the LED flashes blue and red.
From your audio source, select "Shure BT1."
LED turns blue when successfully paired.
For additional pairing options, please visit https://www.shure.com/earphones.
Using the Remote
The Center Button
Power on Press and hold
Power off Press and hold, 5 seconds
Pair Bluetooth Turn off the earphones. Press and hold, 7 seconds
Play/Pause Click once
Answer/End a call Click once
Decline a call Press and hold, 3 seconds
Activate voice assistant Phone on, press and hold, 3 seconds
Factory Reset
Turn off the earphones and plug into a charger. Press
and hold, 15 seconds. Hold past pairing mode until ear
phones turn off again.
Up and Down Buttons
Volume Up/Down Click + or -
Next track Press and hold +, 3 seconds
Previous track Press and hold -, 3 seconds
Check battery status Press and hold + and - together, 3 seconds
Your phone may not be compatible with some functions. Visit http://www.shure.com/earphones for more information.
Shure Incorporated
8/12
1.
2.
3.
Charging the Earphones
Red LED indicates low battery.
Connect earphones to charging device using supplied cable.
LED is red while charging.
When earphones are charged, LED turns off.
Warning: Before charging, make sure the product is at room temperature, between 0 to 45°C (32 to 113°F).
Note: Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC, INMETRO).
Specifications
Transducer Type
Single High-Definition MicroDriver
Sensitivity
at 1 kHz
107 dB SPL/mW
Impedance
at 1 kHz
17 Ω
Frequency Range
SE215 Special Edition 21 Hz –17.5 kHz
SE215 22 Hz –17.5 kHz
Net Weight
30 g (1 oz.)
Bluetooth Specifications
Antenna Type
Chip
Antenna Gain
+2.13 dBi
Shure Incorporated
9/12
•
•
•
•
•
1.
2.
Bluetooth 4.1
Frequency
2402 to 2480 MHz
Modulation Type
FHSS
RF Output Power
+5.38 dBm (E.I.R.P)
Accessories
For information about earphone accessories and other Shure products visit:
http://www.shure.com/americas/products/accessories/earphones
Furnished accessories subject to change.
Safety Information
Visit http://www.shure.com/earphones for the latest regulatory and compliance information.
WARNING
Follow instructions from manufacturer.
Product battery may explode or release toxic materials. Risk of fire or burns. Do not open, crush, modify, disassemble,
heat above 140°F (60°C), or incinerate.
Attention should be drawn to the environmental aspects of battery disposal.
Product shall not be exposed to excessive heat such as sunshine, fire, or the like.
Do NOT make unauthorized alterations to this product.
Note: Battery replacement to be performed only by Shure authorized service personnel.
CAUTION: Follow applicable laws regarding mobile phone and headphone use while driving.
This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.
Information to the user
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa
tion. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
Shure Incorporated
10/12
•
•
•
•
1.
2.
3.
4.
1.
2.
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC Part 15.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation of this device is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interfer
ence that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applic
ables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouil
lage est susceptible d'en compromettre le fonctionnement.
Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC per
formance.
Este equipo ha sido diseñado para operar con las antenas que enseguida se enlistan y para una ganancia máxima de antena
de [+2.13] dBi. El uso con este equipo de antenas no incluidas en esta lista o que tengan una ganancia mayor que [+2.13] dBi
quedan prohibidas. La impedancia requerida de la antena es de [50] ohms.
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no
cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda
causar su operación no deseada.
經審驗合格之射頻電信終端設備，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及
功能。
射頻電信終端設備之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得
繼續使用。所謂合法通信，係指依電信法規定作業之無線電信。
輸入、製造射頻電信終端設備之公司、商號或其使用者違反本辦法規定，擅自使用或變更無線電頻率、電功率者，除依電
信法規定處罰外，國家通訊傳播委員會並得撤銷其審驗合格證明。
減少電磁波影響，請妥適使用
根據NCC低功率電波輻射性電機管理辦法 規定:
第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原
設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干
擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學
及醫療用電波輻射性電機設備之干擾。
運用に際しての注意
Shure Incorporated
11/12
1.
2.
3.
この機器の使用周波数帯では、電子レンジ等の産業・科学・医療用機器のほか工場の製造ライン等で使用されている移動体識別用の
構内無線局（免許を要する無線局）及び特定小電力無線局（免許を要しない無線局）並びにアマチュア無線局（免許を要する無
線局）が運用されています。
この機器を使用する前に、近くで移動体識別用の構内無線局及び特定小電力無線局並びにアマ チュア無線局が運用さ
れていないことを確認して下さい。
万一、この機器から移動体識別用の構内無線局に対して有害な電波干渉の事例が発生した場合には、 速やかに使用周波
数を変更するか又は電波の発射を停止した上、下記連絡先にご連絡頂き、混 信回避のための処置等（例えば、パーティ
ションの設置など）についてご相談して下さい。
その他、この機器から移動体識別用の特定小電力無線局あるいはアマチュア無線局に対して有害な電波干渉の事例が発生
した場合など何かお困りのことが起きたときは、保証書に記載の販売代 理店または購入店へお問い合わせください。代
理店および販売店情報は Shure 日本語ウェブサイト http://www.shure.co.jp でもご覧いただけます。
現品表示記号について
現品表示記号は、以下のことを表しています。 この無線機器は 2.4GHz 帯の電波を使用し、変調方式は「FH-SS」方式、想定与干
渉距離は 10m です。 2,400MHz～2,483.5MHz の全帯域を使用し、移動体識別装置の帯域を回避することはできません。
日本の電波法および電気通信事業法準拠。本デバイスは日本の電波法および電気通信事業法に基づく認証を受けています。本デ
バイスを改造しないでください（改造すると認証番号は無効になります）。
Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas dev
idamente autorizados.
Para maiores informações, consulte o site da ANATEL - http://www.anatel.gov.br
TRA REGISTERED No: ER56780/17
DEALER No: 67442/17
Shure Incorporated
12/12
The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by
Shure Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The
disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the
appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valu
able raw materials and the treatment of toxic substances.
Paraguay Distributor: Microsystems S.R.L., Senador Long 664 c/Dr. Lilio, Asunción, Paraguay
Certifications
This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.
Hereby, Shure Incorporated declares that the radio equipment is in compliance with Directive 2014/53/EU. The full text of the
EU declaration of conformity is available at the following internet address: http://www.shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49-7262-92 49 0
Fax: +49-7262-92 49 11 4
Email: [email protected]
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Shure Bluetooth Earphones SE215-BT1 ユーザーマニュアル
- タイプ
- ユーザーマニュアル
- このマニュアルも適しています
Shure Bluetooth Earphones SE215-BT1 は、遮音性とワイヤレス接続の両方を提供するイヤホンです。人間工学に基づいた快適なデザインで、長時間使用しても疲れにくくなっています。また、内蔵マイクとリモコンにより、通話や音楽の再生を簡単に操作できます。
SE215-BT1 は、Bluetooth 4.1に対応しており、スマートフォンやタブレットなどのデバイスとワイヤレスで接続できます。最大10メートルの範囲で、安定したワイヤレス接続を実現します。また、バッテリーは最大8時間の連続再生が可能で、長時間使用しても安心です。
SE215-BT1 は、遮音性にも優れており、周囲のノイズを最大37dBまで低減します。これにより、音楽や通話をよりクリアに楽しむことができます。また、イヤーピースは交換可能で、自分に合ったサイズを選ぶことができます。
SE215
他の言語で
関連論文
-
Shure Earphone-Resource-Center ユーザーガイド
-
-
-
-
Shure RMCE-BT2 Bluetooth Earphones クイックスタートガイド
-
-
-
-
-