Tektronix DPO2002B 取扱説明書

xx

MSO2000B and DPO2000B Series

Oscilloscopes

Installation and Safety

ZZZ

Instructions

*P071307801*

071-3078-01

MSO2000B and DPO2000B Series

Oscilloscopes

Installation and Safety

ZZZ

Instructions

xx

www.tektronix.com

071-3078-01

or suppliers, and are protected by national copyright laws and international treaty provisions.

Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication

supersedes that in all previously published material. Speciﬁcations and price change privileges reserved.

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

Contacting Tektronix

Tektronix, Inc.

14150 SW Karl Braun Drive

P.O. Box 500

Beaverton, OR 97077

USA

For product information, sales, service, and technical support:

In North America, call 1-800-833-9200.

Worldwide, visit www.tektronix.com to ﬁnd contacts in your area.

Table of Contents

Preface............................................................................................................... 1

Accessories and Replaceable Parts .......................................................................... 1

Documentation................................................................................................. 4

General Safety Summary .......................................................................................... 5

Compliance Information........................................................................................... 7

EMC Compliance.............................................................................................. 7

Safety Compliance............................................................................................. 9

Environmental Considerations .............................................................................. 11

Operating Requirements .......................................................................................... 12

Electrical Ratings ............................................................................................. 14

Input Ratings .................................................................................................. 14

Environmental Ratings....................................................................................... 15

Physical Speciﬁcations....................................................................................... 15

Installation Procedure............................................................................................. 16

Power-On and Power-Off Procedure ............................................................................ 18

Functional Check ............................................................................................. 19

Compensating a Passive Voltage Probe .................................................................... 20

Application Module Free Trial.............................................................................. 21

Upgrading Firmware ......................................................................................... 22

Connecting Your Oscilloscope to a Computer............................................................. 23

Getting Acquainted with the Oscilloscope............ .............................. .......................... .. 24

Front-Panel Menus and Controls............................................................................ 24

Front-Panel Connectors ...................................................................................... 31

Side-Panel Connector ........................................................................................ 31

Rear-Panel Connectors....................................................................................... 32

まえがき .................................................................................................. 33

アクセサリと交換部品 ............................................................................... 33

マニュアル ........................................................................................... 37

安全にご使用いただくために .......................................................................... 38

適合性に関する情報.................................................................................... 40

EMC 適合性 ......................................................................................... 40

安全性 ............................................................................................... 42

環境への配慮 ....................................................................................... 44

動作の要件 .............................................................................................. 45

電気定格 ............................................................................................ 47

入力定格 ............................................................................................ 47

環境要件 ............................................................................................ 48

物理仕様 ............................................................................................ 48

MSO2000B and DPO2000B Installation and Safety Instructions i

Table of Contents

インストール手順 ........................................................................................ 49

電源投入、電源切断の手順............................................................................ 51

機能チェック......................................................................................... 52

受動電圧プローブの補正 .......................................................................... 53

アプリケーション・モジュールの無料トライアル ................................................... 54

ファームウェアのアップグレード.................................................................... 55

オシロスコープとコンピュータの接続 .............................................................. 56

オシロスコープの概要 .................................................................................. 57

フロント・パネル・メニューとコントロール........................................................... 57

フロント・パネル・コネクタ ........................................................................... 64

サイド・パネル・コネクタ............................................................................. 65

リア・パネル・コネクタ ............................................................................... 65

前言 ...................................................................................................... 68

附件和可更换部件 ................................................................................. 68

文档 .................................................................................................. 72

常规安全概要 ........................................................................................... 73

符合性信息 .............................................................................................. 76

EMC 符合性 .......................................................................................... 76

安全符合性.......................................................................................... 78

环境注意事项....................................................................................... 80

操作要求................................................................................................. 81

电气额定值.......................................................................................... 83

输入额定值.......................................................................................... 83

环境额定值.......................................................................................... 84

物理技术规格....................................................................................... 84

安装步骤................................................................................................. 85

开机和关机步骤 ........................................................................................ 87

功能检查 ............................................................................................ 88

补偿无源电压探头 ................................................................................. 89

应用模块免费试用 ................................................................................. 90

升级固件 ............................................................................................ 91

将示波器连接到计算机............................................................................ 92

熟悉示波器 .............................................................................................. 92

前面板菜单和控制 ................................................................................. 92

前面板连接器....................................................................................... 99

侧面板连接器....................................................................................... 99

后面板连接器...................................................................................... 100

ii MSO2000B and DPO2000B Installation and Safety Instructions

Preface

This manual describes the installation and operation of the following

oscilloscopes:

DPO2002B DPO2004B DPO2012B

DPO2014B DPO2022B DPO2024B

MSO2002B MSO2004B MSO2012B

MSO2014B MSO2022B MSO2024B

Important safety precautions to avoid injury and prevent damage to this

product or any products connected to it

EMC (electromagnetic compliance), safety, and environmental standards with

which the product complies

Voltage, power, and environmental requirements to use the product

Installation procedure

Power-on and power-off procedure

Front- and rear-panel controls and connectors

Accessories and Replaceable Parts

Standard Accessories

Accessory Description

Tektronix part

number

DPO2000B and MSO2000B

Series Oscilloscopes Installation

and Safety Instructions

Provides safety and compliance

information along with hardware

installation instructions to present

the associated safety warnings.

This manual is available in English,

Simpliﬁed Chinese, and Japanese

071-3078‑XX

DPO2000B and MSO2000B

Series Oscilloscopes

Documentation CD

Electronic versions of documents,

including the Programmer Manual

and the Technical Reference.

063-4472‑XX

Tektronix OpenChoice Desktop

PC Communications CD

Productivity, analysis, and

documentation software.

063-4402‑XX

Calibration certiﬁcate

documenting traceability to

national metrology institute(s),

and ISO9001 quality system

registration

——

MSO2000B and DPO2000B Installation and Safety Instructions 1

Preface

Standard Accessories, (cont.)

Accessory Description

Tektronix part

number

French (Option L1) 335-2020-00

Italian (Option L2) 335-2021-00

German (Option L3) 335-2022-00

Spanish (Option L4) 335-2023-00

Japanese (Option L5) 335-2024-00

Portuguese (Option L6) 335-2025-00

Simple Chinese (Option L7) 335-2026-00

Traditional Chinese (Option L8) 335-2027-00

Korean (Option L9) 335-2028-00

Front panel overlay

Russian (Option L10) 335-2029-00

For models 100 MHz bandwidth:

One 200 MHz, 10X passive voltage

probe with 10 Minput resistance

per channel

TPP0200

For DPO2000B and

MSO2000B series: Probes

For models < 100 MHz bandwidth:

One 100 MHz, 10X passive voltage

probe with 10 Minput resistance

per channel

TPP0100

For MSO2000B series: Digital

probe

One, 16-channel digital probe P6316

For MSO2000B series:

Accessories pouch

Pouch that attaches to the handle

for carrying probes and other

accessories.

016-2008-00

Five year warranty For details, refer to the warranty

in the front of the electronic (PDF)

user manual

——

North America (Option A0) 161-0348-00

Universal Euro (Option A1) 161-0343-00

United Kingdom (Option A2) 161-0344-00

Australia (Option A3) 161-0346-00

Switzerland (Option A5) 161-0347-00

Japan (Option A6) 161-0342-00

China (Option A10) 161-0341-00

India (Option A11) 161-0349-00

Brazil (Option A12) 161-0356-00

Power cord

No power cord or AC adapter

(Option A99)

——

2 MSO2000B and DPO2000B Installation and Safety Instructions

Preface

Optional Accessories

Accessory Description Tektronix partnumber

DPO2EMBD The embedded serial triggering and analysis module

enables triggering on packet level information on I2C and

SPI serial buses, as well as bus views, bus decoding,

search tools, and packet decode tables with timestamp

information

DPO2EMBD

DPO2AUTO The automotive serial triggering and analysis module

enables triggering on packet level information on CAN

and LIN serial buses, as well as bus views, bus decoding,

search tools, and packet decode tables with timestamp

information

DPO2AUTO

DPO2COMP The computer triggering and analysis module enables

triggering on RS-232, RS-422, RS-485 and UART serial

buses, search tools, bus views, bus decoding in hex,

binary, and ASCII, and decode tables with timestamp

information

DPO2COMP

DPO2CONN The connectivity module adds an Ethernet port for

remote programmability and a Video Out port to display

the oscilloscope screen on an external monitor

DPO2CONN

NEX-HD2HEADER Adapter that routes the channels from a Mictor connector

to 0.1 inch header pins

NEX-HD2HEADER

TekVPI probes that work with

MSO/DPO2000B Series oscilloscopes

Note: These probes require the use

of the TekVPI external power adapter

listed below.

Visit the Oscilloscope Probe and Accessory Selector

Tool on the Tektronix website at www.tektronix.com

TekVPI external power adapter Supplies external power to a TekVPI probe 119‑7465‑XX

TPA-BNC

Note: This adapter requires the use

of the TekVPI external power adapter

listed above.

TekVPI to TekProbe II BNC Adapter TPA-BNC

Deskew pulse generator Deskew pulse generator and signal source with TekVPI

oscilloscope interface

TEK-DPG

Power measurement deskew and

calibration ﬁxture

Converts TEK-DPG pulse generator output into a series

of test point connections

067-1686-00

TEK-USB-488 Adapter GPIB to USB Adapter TEK-USB-488

Rackmount kit Adds rackmount brackets RMD2000

Soft transit case Case for carrying an oscilloscope ACD2000

Hard transit case Traveling hard case, which requires use of the soft transit

case (ACD2000)

HCTEK4321

DPO2000B and MSO2000B Series

Oscilloscopes Service manual

Service information on DPO2000B and MSO2000B series

oscilloscopes

077-0737‑XX

DPO2000B and MSO2000B Series

Oscilloscopes Application Module

Installation

Describes how to install application modules in

DPO2000B and MSO2000B series oscilloscopes

071-2330‑XX

MSO2000B and DPO2000B Installation and Safety Instructions 3

Preface

Documentation

The following table lists the documentation that is available for the product and

shows where you can ﬁnd it: in a printed manual, on the product documentation

CD-ROM, or on the Tektronix Web site at www.tektronix.com.

Table 1: Product documentation

Item Purpose Location

Installation and Safety Instructions (this

manual)

Provides safety and compliance

information along with hardware

installation instructions to present the

associated safety warnings. This manual

is available in English, Japanese, and

Simpliﬁed Chinese

Printed manual and also

available in electronic format at

www.tektronix.com/manuals

User Manual Provides operation and application

information. This manual is available

in English, French, Italian, German,

Spanish, Japanese, Portuguese,

Simpliﬁed Chinese, Traditional Chinese,

Korean, and Russian

Product Documentation CD and available

at www.tektronix.com/manuals

Speciﬁcations and Performance

Veriﬁcation Technical Reference

Speciﬁcations and procedures for

checking instrument performance.

Product Documentation CD and available

at www.tektronix.com/manuals

Programmer Manual Command reference for remotely

controlling the instrument.

Product Documentation CD and available

at www.tektronix.com/manuals

Service Manual Provides information about adjustments,

repair, and replaceable parts.

Available at www.tektronix.com/manuals

4 MSO2000B and DPO2000B Installation and Safety Instructions

General Safety Summary

General SafetySummary

Review the following safety precautions to avoid injury and prevent damage to

this product or any products connected to it.

To avoid potential hazards, use this product only as speciﬁed.

Only qualiﬁed personnel should perform service procedures.

While using this product, you may need to access other parts of a larger system.

Read the safety sections of the other component manuals for warnings and

cautions related to operating the system.

To Avoid Fire or Personal

Injury

Use Proper Power Cord. Use only the power cord speciﬁed for this product and

certiﬁed for the country of use.

Connect and Disconnect Properly. Do not connect or disconnect probes or test

leads while they are connected to a voltage source.

Connect and Disconnect Properly. De-energize the circuit under test before

connecting or disconnecting the current probe.

Ground the Product. This product is grounded through the grounding conductor

of the power cord. To avoid electric shock, the grounding conductor must be

connected to earth ground. Before making connections to the input or output

terminals of the product, ensure that the product is properly grounded.

Observe All Terminal Ratings. To avoid ﬁre or shock hazard, observe all ratings

and markings on the product. Consult the product manual for further ratings

information before making connections to the product.

Connect the probe reference lead to earth ground only.

Do not apply a potential to any terminal, including the common terminal, that

exceeds the maximum rating of that terminal.

Power Disconnect. The power cord disconnects the product from the power

source. Do not block the power cord; it must remain accessible to the user at

all times.

Do Not Operate Without Covers. Do not operate this product with covers or

panels removed.

Do Not Operate With Suspected Failures. If you suspect that there is damage to

this product, have it inspected by qualiﬁed service personnel.

Avoid Exposed Circuitry. Do not touch exposed connections and components

when power is present.

MSO2000B and DPO2000B Installation and Safety Instructions 5

General Safety Summary

Do Not Operate in Wet/Damp Conditions.

Do Not Operate in an Explosive Atmosphere.

Keep Product Surfaces Clean and Dry.

Provide Proper Ventilation. Refer to the manual’s installation instructions for

details on installing the product so it has proper ventilation.

TermsinthisManual These terms may appear in this manual:

WARNING. Warning statements identify conditions or practices that could result

in injury or loss of life.

CAUTION.Caution statements identify conditions or practices that could result in

damage to this product or other property.

Symbols and Terms on the

Product

These terms may appear on the product:

DANGER indicates an injury hazard immediately accessible as you read

the marking.

WARNING indicates an injury hazard not immediately accessible as you

read the marking.

CAUTION indicates a hazard to property including the product.

The following symbol(s) may appear on the product:

6 MSO2000B and DPO2000B Installation and Safety Instructions

Compliance Information

This section lists the EMC (electromagnetic compliance), safety, and

environmental standards with which the instrument complies.

EMC Compliance

EC Declaration of

Conformity – EMC

Meets intent of Directive 2004/108/EC for Electromagnetic Compatibility.

Compliance was demonstrated to the following speciﬁcations as listed in the

Ofﬁcial Journal of the European Communities:

EN 61326-1:2006, EN 61326-2-1:2006. EMC requirements for electrical equipment

for measurement, control, and laboratory use. 123

CISPR 11:2003. Radiated and conducted emissions, Group 1, Class A

IEC 61000-4-2:2001. Electrostatic discharge immunity

IEC 61000-4-3:2002. RF electromagnetic ﬁeld immunity 4

IEC 61000-4-4:2004. Electrical fast transient/burst immunity

IEC 61000-4-5:2001. Power line surge immunity

IEC 61000-4-6:2003. Conducted RF immunity 5

IEC 61000-4-11:2004. Voltage dips and interruptions immunity 6

EN 61000-3-2:2006. AC power line harmonic emissions

EN 61000-3-3:1995. Voltage changes, ﬂuctuations, and ﬂicker

European Contact.

Tektronix UK, Ltd.

Western Peninsula

Western Road

Bracknell, RG12 1RF

United Kingdom

1This product is intended for use in nonresidential areas only. Use in residential areas may cause electromagnetic

interference.

2Emissions which exceed the levels required by this standard may occur when this equipment is connected to a

test object.

3To ensure compliance with the EMC standards listed here, high quality shielded interface cables should be used.

4Trace bloom not exceeding 4 divisions pk-to-pk may be induced under the conditions of the IEC 61000-4-3 test.

5Trace bloom not exceeding 1 division pk-to-pk may be induced under the conditions of the IEC 61000-4-6 test.

6Performance Criterion C applied at the 70%/25 cycle Voltage-Dip and the 0%/250 cycle Voltage-Interruption test

levels (IEC 61000-4-11).

MSO2000B and DPO2000B Installation and Safety Instructions 7

Compliance Information

7Add text here to list inrush current information.

Australia / New Zealand

Declaration of

Conformity – EMC

Complies with the EMC provision of the Radiocommunications Act per the

following standard, in accordance with ACMA:

CISPR 11:2003. Radiated and Conducted Emissions, Group 1, Class A, in

accordance with EN 61326-1:2006 and EN 61326-2-1:2006.

Australia / New Zealand contact.

Baker & McKenzie

Level 27, AMP Centre

50 Bridge Street

Sydney NSW 2000, Australia

8 MSO2000B and DPO2000B Installation and Safety Instructions

Compliance Information

Safety Compliance

EC Declaration of

Conformity – Low Voltage

Compliance was demonstrated to the following speciﬁcation as listed in the

Ofﬁcial Journal of the European Communities:

Low Voltage Directive 2006/95/EC.

EN 61010-1: 2001. Safety requirements for electrical equipment for

measurement control and laboratory use.

U.S. Nationally Recognized

Testing Laboratory Listing

UL 61010-1:2004, 2nd Edition. Standard for electrical measuring and test

equipment.

Canadian Certiﬁcation CAN/CSA-C22.2 No. 61010-1:2004. Safety requirements for electrical

equipment for measurement, control, and laboratory use. Part 1.

Additional Compliances IEC 61010-1: 2001. Safety requirements for electrical equipment for

measurement, control, and laboratory use.

Equipment Type Test and measuring equipment.

Safety Class Class1–groundedproduct.

Pollution Degree

Description

A measure of the contaminants that could occur in the environment around

and within a product. Typically the internal environment inside a product is

considered to be the same as the external. Products should be used only in the

environment for which they are rated.

Pollution Degree 1. No pollution or only dry, nonconductive pollution occurs.

Products in this category are generally encapsulated, hermetically sealed, or

located in clean rooms.

Pollution Degree 2. Normally only dry, nonconductive pollution occurs.

Occasionally a temporary conductivity that is caused by condensation must

be expected. This location is a typical ofﬁce/home environment. Temporary

condensation occurs only when the product is out of service.

Pollution Degree 3. Conductive pollution, or dry, nonconductive pollution

that becomes conductive due to condensation. These are sheltered locations

where neither temperature nor humidity is controlled. The area is protected

from direct sunshine, rain, or direct wind.

Pollution Degree 4. Pollution that generates persistent conductivity through

conductive dust, rain, or snow. Typical outdoor locations.

MSO2000B and DPO2000B Installation and Safety Instructions 9

Compliance Information

Pollution Degree Pollution Degree 2 (as deﬁned in IEC 61010-1). Note: Rated for indoor use only.

Installation (Overvoltage)

Category Descriptions

Terminals on this product may have different installation (overvoltage) category

designations. The installation categories are:

Measurement Category IV. For measurements performed at the source of

low-voltage installation.

Measurement Category III. For measurements performed in the building

installation.

Measurement Category II. For measurements performed on circuits directly

connected to the low-voltage installation.

Measurement Category I. For measurements performed on circuits not

directly connected to MAINS.

Overvoltage Category Overvoltage Category II (as deﬁned in IEC 61010-1)

10 MSO2000B and DPO2000B Installation and Safety Instructions

Compliance Information

Environmental Considerations

This section provides information about the environmental impact of the product.

Product End-of-Life

Handling

Observe the following guidelines when recycling an instrument or component:

Equipment Recycling. Production of this equipment required the extraction and

use of natural resources. The equipment may contain substances that could be

harmful to the environment or human health if improperly handled at the product’s

end of life. In order to avoid release of such substances into the environment and

to reduce the use of natural resources, we encourage you to recycle this product

in an appropriate system that will ensure that most of the materials are reused or

recycled appropriately.

This symbol indicates that this product complies with the applicable European

Union requirements according to Directives 2002/96/EC and 2006/66/EC

on waste electrical and electronic equipment (WEEE) and batteries. For

information about recycling options, check the Support/Service section of the

Tektronix Web site (www.tektronix.com).

MercuryNotiﬁcation. This product uses an LCD backlight lamp that contains

mercury. Disposal may be regulated due to environmental considerations. Please

contact your local authorities or, within the United States, refer to the E-cycling

Central Web page (www.eiae.org) for disposal or recycling information.

Restriction of Hazardous

Substances

This product has been classiﬁed as Monitoring and Control equipment, and is

outside the scope of the 2002/95/EC RoHS Directive.

MSO2000B and DPO2000B Installation and Safety Instructions 11

Operating Requirements

This section provides the speciﬁcations that you need to know to operate your

product safely and correctly. Refer to the complete product speciﬁcations in the

MSO/DPO2000B Technical Reference for additional information.

DPO2000B and MSO2000B

Series Oscilloscopes

Power Supply Input Voltage: 100 V to 240 V ± 10%

Power Supply Input Power Frequency:

50/60 Hz at 100 V to 240 V

400 Hz at 115 V

Power Consumption: 80 W maximum

Input Voltage (between the signal and reference): 300 VRMS CAT II

Installation Category II - for measurements performed on circuits directly

connected to the low-voltage installation

Figure 1: MSO2000B series

Figure 2: DPO2000B series

12 MSO2000B and DPO2000B Installation and Safety Instructions

Operating Requirements

TPP0100 or a TPP0200

Passive Probe Single-ended voltage probe (ground referenced): 300 VRMS CAT II safety requirements

Installation Category II - for measurements performed on circuits directly connected to the

low-voltage installation

Temperature:

Operating: -10 °C to +55 °C (+14 °F to +131 °F)

Nonoperating: -51 °C to +71 °C ( -60 °F to +160 °F)

Pollution Degree: 2, Indoor use only

Humidity: 5% to 95% RH

MSO2000B Series

Oscilloscope with a P6316

Digital Probe Threshold Accuracy: ±(100 mV + 3% of threshold)

Threshold Range: ±20 V

Maximum nondestructive input signal to probe: ±40 V peak

Minimum signal swing: 500 mVpeak-to-peak

Input resistance: 101 k

Input capacitance: 8.0 pF

Temperature:

Operating: 0 °C to +50 °C (+32 °F to +122 °F)

Nonoperating: -20 °C to +60 °C (-4 °F to +140 °F)

Altitude:

Operating: 3,000 m (9,843 ft) maximum

Nonoperating: 12,000 m (39,370 ft) maximum

Pollution Degree: 2, Indoor use only

Humidity:

5% to 95% relative humidity

MSO2000B and DPO2000B Installation and Safety Instructions 13

Operating Requirements

Electrical Ratings

Power Requirements

Power connector

The instrument has the following power requirements:

A single-phase power source with one current-carrying conductor at or near

earth-ground (the neutral conductor).

NOTE. Systems with both current-carrying conductors live with respect to ground

(such as phase-to-phase in multiphase systems) are not recommended as power

sources.

The mains supply frequency must be 50 or 60 Hz.

The mains supply voltage must be in the range from 100 to 240 VAC.

WARNING. To reduce risk of ﬁre and shock, ensure the mains supply voltage

ﬂuctuations do not exceed 10% of the operating voltage range.

Fuses Only the line conductor is fused for over-current protection. The fuse is internal

and not user replaceable. Do not attempt to replace the fuse. If you suspect the

fuse has blown, return the instrument to an authorized service center for repair.

Batteries The instrument does not contain any user-replaceable batteries.

Input Ratings

Table 2: Maximum input voltage

Input Rating

At front-panel BNC connector 300 V RMS, Installation Category II; derate above 4 MHz to 6 V RMS at 200 MHz.

At the P6316 probe input, not at the

instrument input

±40 V peak

14 MSO2000B and DPO2000B Installation and Safety Instructions

ページが読み込まれています...

Tektronix DPO2002B 取扱説明書

Tektronix DPO2002B 取扱説明書

他の言語で

関連論文

その他のドキュメント