Philips HD4923/00 ユーザーマニュアル

カテゴリー
小さなキッチン家電
タイプ
ユーザーマニュアル
HD4923
2
3
1 2 3 4 65
8 791011
D
A
F
E
B
C
G
1
4
HD4923
ENGLISH 6
繁體中文 15
简体中文 23
6
Introduction
Congratulations on your purchase and welcome to Philips! To fully benet from the support that
Philips offers, register your product at www.philips.com/welcome.
The induction cooker works on the basis of an electromagnet that creates a powerful, high-
frequency electromagnetic eld. When cookware consisting of magnetic material (e.g. iron) is placed
on the induction cooker, the electromagnetic eld transfers energy to the bottom of the cookware,
which causes the cookware and the food inside it to become hot. The amount of heat generated in
the cookware is controlled by varying the strength of the electromagnetic eld. When the strength
of the electromagnetic eld is changed, the temperature of the cookware changes instantly.
Advantages of the induction cooker:
Safe: the induction cooker does not make use of an open ame or re. It also has a number of
safety features, which allow you to enjoy cooking with your family whenever you want.
Fast: in induction cooking, the cookware serves as the heat source. This results in much faster
and more even heat transfer, shortening the cooking time by more than 40% compared to
conventional cooking.
Versatile: the induction cooker has 9 preset cooking modes, each with its own optimal heating
pattern. These modes allow you to prepare a great variety of nutritious meals.
Very user friendly: the simple and interactive control panel and display allow you to easily adjust
the settings at the touch of a button.
Comfortable: the induction cooking process is smoke-free and produces less grease. Moreover,
the cooker and the surrounding area stay cool. This allows you to cook in a cool
and comfortable environment.
Portable: the induction cooker has a compact design and the cooking plate stays cool. This
means the appliance is always safe to use and allows you to cook anywhere in your home.
General description (Fig. 1)
A Crystalite cooking plate
B Cooking zone
C Body
D Control panel
E Air inlet
F Mains cord
G Air outlets
D Control panel
1 Cooking time button with light
2 Timer button with light
3 Buttons with lights for 9 preset cooking modes
4 Quick-start (manual) button
5 Start button with light
6 Power on/off button with power-on light
7 +/- buttons for setting the power level or cooking temperature
8 Turbo button
9 Power level/cooking temperature bar with lights
10 Time display
11 +/- buttons for setting the cooking time and timer
Important
Read this user manual carefully before you use the appliance and save it for future reference.
Danger
Never immerse the appliance in water or rinse it under the tap.
-
-
-
-
-
-
-
ENGLISH
Warning
The temperature of accessible surfaces may be high when the appliance operates.
Check if the voltage indicated on the appliance corresponds to the local mains voltage before
you connect the appliance.
Only connect the appliance to an earthed wall socket. Always make sure the plug is inserted
rmly into the socket.
Do not use the appliance if the plug, the mains cord or the appliance itself is damaged.
If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by
Philips or similarly qualied persons in order to avoid a hazard.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their
safety.
Children should be supervised to ensure that they do not play with the appliance.
Keep the mains cord out of the reach of children. Do not let the mains cord hang over the edge
of the table or worktop on which the appliance stands.
Never connect this appliance to an external timer switch in order to avoid a hazardous situation.
Make sure the cooking plate is clean and dry before you switch on the appliance.
Do not cover the air outlets while the induction cooker is operating.
Do not plug in the appliance or operate the control panel with wet hands.
Do not touch the cooking plate after cooking, as it retains heat from the cookware.
Metallic objects such as knives, forks, spoons and lids should not be placed on the cooking plate
since they can get hot.
Do not cover any part of the cooking plate with aluminium to prevent the risk of electric
shock, short circuiting or re.
If the surface of the cooking plate is cracked, switch off the appliance and do not use it anymore
to prevent the risk of electric shock, short circuiting or re.
Caution
Never use any accessories or parts from other manufacturers or that Philips does
not specically recommend. If you use such accessories or parts, your guarantee becomes
invalid.
Do not expose the induction cooker to high temperatures, hot gas, steam or damp heat. Do
not place the induction cooker on or near an operating or still hot stove or cooker.
Always switch off the appliance before you unplug it.
Always unplug the appliance and let it cool down before you clean it.
This appliance is intended for household use only. If the appliance is used improperly or for
professional or semi-professional purposes or if it is not used according to the instructions in
the user manual, the guarantee becomes invalid and Philips refuses any liability for damage
caused.
Place the induction cooker on a stable, horizontal and level surface and make sure there is at
least 10cm free space around it to prevent overheating.
For better ventilation, do not block the air inlet and outlets while the appliance is operating, e.g.
do not operate the appliance on a plastic tablecloth.
Do not place anything between the cookware and the cooking plate.
The maximum weight that can be put on the induction cooker is 8kg.
Beware of hot steam that comes out of the cookware during cooking or when you remove the
lid.
Do not lift and move the induction cooker while it is operating.
Never put empty cookware on the switched-on induction cooker, as this could cause the
cookware to become distorted or the heating coil to become damaged.
Do not store ammable materials and liquids near or on the induction cooker.
Avoid hard contact between the cookware or other objects and the crystalite cooking plate.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ENGLISH 7
Always place the cookware on the cooking zone during cooking.
Do not use cookware with a bottom diameter of more than 16cm to deep-fry food, as this
causes the appliance to malfunction.
Automatic shut-off
The appliance is equipped with automatic shut-off. It switches off automatically in two situations:
In the quick-start (manual) mode and the hot pot mode, the appliance switches off
automatically if you do not press any button for 60 minutes.
If there is no cookware or unsuitable cookware on the cooking plate when you press the start
button or if you remove cookware from the cooking plate during cooking, the cooker beeps
continuously, ‘--:--’ ashes on the display and the power level/cooking temperature bar ashes.
The cooker automatically switches off after 1 minute unless you put the cookware back onto
the cooking plate within this minute.
Electromagnetic elds (EMF)
This Philips appliance complies with all standards regarding electromagnetic elds (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientic evidence available today.
Before rst use
Remove all packaging material from the induction cooker.
Preparing for use
1
Place the appliance on a dry, stable and level surface.
2 Make sure there is at least 10cm free space around the appliance to prevent overheating.
3 Always place the cookware on the cooking zone during cooking.
4 Make sure you use cookware of the correct type and size (see the tables below).
Recommended types and sizes of cookware
Suitable cookware for the
induction cooker
Material Cookware with a bottom made of iron or magnetic stainless
steel
Shape Cookware with a at bottom
Size Cookware with a bottom diameter of 12-23cm, depending on
the cooking mode (see tips below)
Weight Cookware with a weight of up to 8kg (including contents)
Cookware NOT suitable for the
induction cooker
Material Cookware with a bottom made of non-iron metal,
crystalite, glass, aluminium and copper
Shape Cookware with a concave or convex bottom
Size Cookware with a bottom diameter of less than 11cm
Weight Cookware with a weight over 8kg (including contents)
-
-
-
-
ENGLISH8
Tip: When you cook in the quick-start (manual) mode or hot pot mode, you can use cookware with a
bottom diameter of 12-25cm.
Tip: To deep-fry food, we advise you to use cookware with a bottom diameter of 12-16cm.
Note: Cookware made of different materials may require different amounts of water.
Using the appliance
Only use cookware that is suitable for induction cooking (see chapter ‘Preparing for use’).
Note: Always place and use the appliance on a dry, stable and level surface.
The tables below shows the default settings in the different cooking modes and to what extent
these default settings can be adjusted.
Default and adjustable settings
Mode Default
cooking
time
(min)
Power
(watt)/
temperature
(°C) range
Adjustable
cooking time
(min)
Timer Indications on
control panel
Quick-
start (manual)
5 400-2200W 5-60 - Power bar
Remaining cooking
time and power
bar (if cooking time is
set)
Hot pot - 400-2200W - - Power bar
Stew 60 400-1400W 30-180 up to
24hrs
Remaining cooking
time and power bar
Soup/congee 60 400-1400W 30-180 up to
24hrs
Remaining cooking
time and power bar
Steam-lo 15 2000W 10-40 up to
24hrs
Remaining cooking
time and power bar
Steam-hi 20 2000W 10-60 up to
24hrs
Remaining cooking
time and power bar
Stir-fry 30 80-240°C 5-60 - Temperature and
power bar
Boil 9 2200W 5-30 - Remaining cooking
time and power bar
Keep-warm 30 80°C 15-180 - Remaining cooking
time
Warm milk 10 80°C 3-30 - Remaining cooking
time
Turbo - 2200W - - -
Note: In the stew and soup/congee modes, the appliance rst brings the food to the boil and then
switches to a lower power level. You can only adjust the power level after the boiling stage.
ENGLISH 9
Note: The steam modes allow you to steam various types of food, such as steamed rolls, egg, pork ribs or
chicken. The steam-lo mode is suitable for steaming a small amount of food, like eggs or buns. The steam-
hi mode is suitable for steaming a large amount of food, like ribs or chicken.
Note: The boil mode allows you to boil water or food in a fast way. The suggested boiling time for 1 litre is
3-5 minutes, for 2 litres 6-10 minutes and for 3 litres 9-14 minutes.
Power/temperature settings
Low Mid High
Wattage (W) 400 800 1000 1200 1400 1600 1800 2200
Temperature
(°C)
80 120 140 160 180 200 220 240
Using the different modes
You can choose between the quick-start (manual) mode and 9 preset cooking modes.
1 Put the mains plug in the wall socket and press the power on/off button to switch on the
appliance. (Fig. 2)
The appliance produces a 2-second beep and the power-on light goes on.
The power bar shows the default power level (1400W). (Fig. 3)
2 Place the cookware on the cooking zone.
3 Press the quick-start (manual) button or the button of the preset mode you want to
use. (Fig. 4)
Note: With some buttons you can select various modes. Simply press the button several times to select
the preferred mode.
The corresponding button and mode light up. (Fig. 5)
The appliance is set to the default settings of the quick-start mode (5 minutes cooking time
and a power level of 1400W) or to the default settings of the selected preset mode.
Note: Before you press the start button to conrm the selected mode, you can still switch to
another mode. If you want to switch to a different mode after you have pressed the start button, you
have to switch off the appliance by pressing the power on/off button. Then press the power on/off button
again to switch the appliance back on and select the desired mode.
4 If you want to start cooking at the default setting of the selected mode, continue with step 7.
See the default settings and cooking time table above for the default settings of the different cooking
modes.
5 If you want to adjust the power level or cooking temperature, press the + and - buttons on
the right side of the control panel. (Fig. 6)
Certain settings cannot be adjusted. See the table above for information about the settings that can
or cannot be adjusted in the various modes.
Note: You can also adjust the power level or cooking temperature during cooking.
6 If you want to adjust the cooking time, press the + and - buttons on the left side of the
control panel. (Fig. 7)
Note: If you are in the manual mode, you have to press the cooking time button before you can adjust
the cooking time with the + and - buttons.
,
,
,
,
ENGLISH10
Note: When you press the + and - buttons briey, the time increases or decreases by 1 minute. When you
press the buttons longer, the time increases or decreases by 5 minutes.
Note: You can also adjust the cooking time during cooking.
7 Press the start button (Fig. 8).
The start light goes on.
The induction cooker automatically starts operating according to the selected mode.
Note: If you have not adjusted the cooking time, power level or cooking temperature, the induction cooker
starts operating at the default settings of the selected mode.
During cooking, the fan switches on to keep the appliance cool. When you switch off the
appliance, the fan remains on for approx. 1 minute and then switches off automatically.
The time display shows the remaining cooking time. At the same time, the selected cooking
temperature or power level light goes on (Fig. 9).
When the cooking time has elapsed, the appliance beeps a few times.
The appliance automatically switches off and the power-on light goes out.
Note: If you want to stop cooking, press the power on/off button. The appliance then switches off.
8 Unplug the appliance after use.
Using the timer
You can use the timer button to set the time at which you want the appliance to start cooking at a
preset cooking mode.
For example: if it is 14:00 hours and you want the appliance to start cooking at 18:00 hours, set the
timer to 4.00 (4 hours) and press the start button. After 4 hours, at 18:00 hours, the appliance
automatically starts cooking.
You can use the timer function for the stew, soup/congee, steam-lo and steam-hi modes.
You can set a start time of 5 minutes to 24 hours.
1 Follow steps 1 to 5 of section ‘Using the different modes’.
2 Press the timer button (Fig. 10).
The timer light goes on.
3 Press the + and - buttons on the left side of the control panel to set the number of minutes
or hours after which you want the appliance to start cooking (Fig. 7).
Note: Press the + or - button briey to increase or decrease the time in steps of 1 minute. When you
press the + or - button longer, the time increases or decreases in steps of 5 minutes.
Note: If you want to adjust the cooking time, rst press the cooking time button and then press the +
and - buttons on the left side of the control panel.
4 Press the start button to start the timer (Fig. 8).
The start light goes on.
The time display starts counting down the time.
When the cooking process starts, the timer light goes out and the display shows that the
cooking process has started.
Cleaning and maintenance
Cleaning
Never immerse the appliance in water nor rinse it under the tap.
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone
to clean the appliance.
,
,
,
,
,
,
,
,
,
ENGLISH 11
Do not put vinegar on the crystalite cooking plate.
1 Unplug the appliance and let it cool down.
2 Clean the appliance with a damp cloth and, if necessary, with some mild cleaning agent.
Maintenance
Improper use can lead to scratches on the cooking plate. To avoid discolouring and scratches, use
the appliance according to the instructions in this user manual and always clean the appliance and
cookware properly after use.
Storage
Do not place heavy objects on the crystalite cooking plate as it is breakable.
Do not store the appliance in a hot place, for example near a cooker.
If you are not going to use the appliance for a longer period of time, store the appliance in a dry
and safe place.
Environment
Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an ofcial collection point for recycling. By doing this, you help to preserve the
environment (Fig. 11).
Guarantee and service
If you need service or information or if you have a problem, please visit the Philips website at
www.philips.com or contact the Philips Consumer Care Centre in your country (you nd its phone
number in the worldwide guarantee leaet). If there is no Consumer Care Centre in your country,
go to your local Philips dealer.
Troubleshooting
If your induction cooker does not function properly or if the cooking quality is insufcient, consult
the table below. If you are unable to solve the problem, contact a Philips service centre or the
Consumer Care Centre in your country.
Problem Solution
The power-on light does
not go on.
There is a connection problem. Check if the induction cooker is
connected to the mains and if the plug is inserted rmly into the wall
socket
The light is defective. Take the appliance to your Philips dealer or a
service centre authorised by Philips.
When I press one of the
cooking mode buttons,
the light of the selected
mode does not go on.
The light is defective. Take the appliance to your Philips dealer or a
service centre authorised by Philips.
The cooking time light
does not go on when I
set the cooking time.
You have selected the hot pot mode. You can only adjust the cooking
time in the quick-start (manual) mode and in the preset stew, soup/
congee, steam-hi, steam-lo, stir-fry, boil, warm milk and keep-warm
modes.
-
ENGLISH12
Problem Solution
The light is defective. Take the appliance to your Philips dealer or a
service centre authorised by Philips.
The timer light does not
go on when I set the
timer.
You have selected the quick-start (manual) mode or the preset hot
pot, stir-fry, boil, warm milk or keep-warm mode. You can only use the
timer in the stew, soup/congee, steam-hi and steam-lo modes (see
the ‘Default and adjustable settings’ table in chapter ‘Using the
appliance’).
The light is defective. Take the appliance to your Philips dealer or a
service centre authorised by Philips.
I cannot change the
power setting before I
select the stew mode or
soup/congee mode.
In the stew and soup/congee modes, the appliance rst brings the
food to the boil and then switches to a lower power level. You can
only adjust the power level after the boiling stage.
The appliance beeps
continuously.
You have put unsuitable cookware on the cooking plate or you have
removed the cookware from the cooking plate during cooking.
Place suitable cookware on the cooking plate.
The maximum power
setting for certain
cooking modes is very
low.
In the stew and soup/congee modes, the appliance rst brings the
food to the boil and then switches to a lower power level. You can
only adjust the power level after the boiling stage.
I cannot switch to a
different cooking mode
during cooking.
You cannot switch to a different cooking mode during cooking. If you
want to select a different cooking mode, press the power on/off
button to switch off the cooker. Then press the power on/off button
again to switch the cooker back on.
The fan works but the
appliance has not started
cooking.
You have to press the start button within 1 minute after you press the
power on/off button. If you do not press the start button within 1
minute, the induction cooker switches off and the fan continues to
work for 1 minute to cool down the appliance.
Codes on the
display
Message What you should do
’--:--’ ashes on
the display
There is no cookware
on the cooking plate or
the cookware is not
suitable for the
induction cooker.
Place suitable cookware on the cooking plate.
E1 Unstable voltage in
power supply network
Check if the voltage in your home is suitable for
the induction cooker.
E2 The cooking plate has
overheated.
Switch off the appliance and unplug it. Let it cool
down for approx. 10 minutes and then switch on
the appliance again.
E3 The appliance
malfunctions
Take the appliance to a Philips dealer or a service
centre authorised by Philips.
ENGLISH 13
Codes on the
display
Message What you should do
E4 The appliance has
overheated
Check if the air outlets are covered. If so, remove
the object or objects covering the air outlets and
let the appliance cool down. Then switch on the
appliance again.
If the air outlets are covered, check if the fan
works. Switch on the appliance and press the start
button. If the fan does not work, take the appliance
to your Philips dealer or a service centre
authorised by Philips.
Recipes
Chinese-style soup
Preparation time: 3 hours
Ingredients:
300g chicken
1 carrot
2 potatoes
1 onion
2ltr water
1 Put all ingredients in the cookware in the same order as described above.
2 Put the lid on the cookware.
3 Place the cookware on the cooker and boil the soup in the soup/congee mode (see chapter
‘Using the appliance’, section ‘Using the preset cooking modes’).
Pork rib stew with mushrooms
Preparation time: 1 hour
Ingredients:
800g pork ribs
1tbsp dark soy sauce
1tbsp light soy sauce
1tsp salt
2tbsp sugar
2tbsp oil
500ml water
8 chinese dried mushrooms
1 Soak the dried mushrooms for 30 minutes before you use them. Set them aside to drain for a
few seconds.
2 Cut the pork ribs into pieces of about 5cm.
3 Put the oil in the cookware and heat it slightly. Add the pork pieces.
4 Add soy sauce, salt, sugar and mushrooms.
5 Add the water and cook in the stew mode (see chapter ‘Using the appliance’, section ‘Using
the preset cooking modes’).
6 Cook the pork ribs until the meat is tender and the sauce is glazed.
-
-
-
-
-
-
-
-
-
-
-
-
-
ENGLISH14
15
簡介
恭喜您購買本產品並歡迎加入飛利浦!請於 www.philips.com/welcome 註冊您的產品,
來善用飛利浦提供的支援。
電磁爐的運作原理是利用電磁鐵產生強力的高頻電磁場。將具磁性材料 (如鐵製) 的鍋具放
在電磁爐上時,電磁場會將能源轉往鍋具底部,使鍋具及其中食物加熱。要調整鍋具溫度
時,只要改變電磁場強度,鍋具溫度便會立即改變。
電磁爐的優點:
安全:電磁爐不使用火焰,還有多重安全裝置,讓您隨時都可以與家人一同烹調享受
美食。
快速:使用電磁爐烹煮時,鍋具便是熱源。因此導熱更快也更好,跟傳統烹調方法比
起來,能夠省下百分之四十的時間。
多樣化:電磁爐有 9 種預設烹調模式,每一種都設有最佳的加熱模式。善用這些模式
即可調理各式各樣營養滿點的餐點。
簡易操作:互動式的控制面板簡潔有力,並有顯示螢幕助您操作按鈕輕易調整設定。
舒適:電磁爐烹調無煙不油膩,而且電磁爐本身和四週空間不悶熱,讓您舒舒服服調
理餐點。
輕便:電磁爐設計輕巧,加熱面板也不留熱度,隨時都能安全操作,在家裡每個地方
都可以調理餐點。
一般說明(圖1)
A 水晶玻璃加熱面板
B 烹調區
C 機體
D 控制面板
E 進風口
F 電線
G 出風口
D控制面板
1 定時烹調時間按鈕附指示燈
2 預約按鈕附指示燈
3 9 種預設烹調模式按鈕附指示燈
4 快速啟動 (手動) 按鈕
5 開始按鈕附指示燈
6 電源開關按鈕附電源指示燈
7 設定功率或烹調溫度的 +/- 按鈕
8 最大火力按鈕
9 功率/烹調溫度格附指示燈
10 時間顯示幕
11 設定烹調時間及計時器的 +/- 按鈕
重要事項
在使用本產品前,請先仔細閱讀本使用手冊,並保留說明以供日後參考。
危險
切勿將本產品浸入水中或置於水龍頭下沖洗。
警示
本產品運轉時,機體表面溫度很高。
在您連接電源之前,請檢查本地的電源電壓是否與產品所標示的電源電壓相符。
僅可將本產品連接到有接地的電源插座上。請務必確定將插頭確實插入插座中。
當插頭、電線或產品本身受損時,請勿使用產品。
-
-
-
-
-
-
-
-
-
-
-
繁體中文
如果電線損壞,必須交由飛利浦、飛利浦授權之服務中心,或是具備相同資格的技師
更換,以免發生危險。
本產品不適合供下列人士 (包括小孩) 使用:身體官能或心智能力退化者,或是經驗與
使用知識缺乏者。他們需要有負責其安全的人員在旁監督,或指示產品的使用方法,
方可使用。
請勿讓孩童將本產品當成玩具。
請勿讓兒童接觸電源線。請勿讓電源線懸掛在產品放置的餐桌或流理台邊緣。
為了避免發生危險,本產品不可加裝外部定時開關。
啟動電器之前請務必確定加熱面板已清潔且乾燥。
使用電磁爐時,請勿擋住出風口。
為電器插上電源或操作控制面板時,請確保雙手乾燥。
烹煮之後請勿觸摸加熱面板,因為面板尚有鍋具餘熱。
刀、叉、湯匙和蓋子等金屬物品溫度會升高,因此請勿放在加熱面板上。
請勿用鋁蓋住加熱面板任何部分,以避免觸電、短路或著火。
如果加熱面板表面有裂縫,請關閉本產品電源,不要再使用,以避免電擊、短路或著
火的危險。
警告
請勿使用其他製造商的任何配件或零件,或非飛利浦建議之配件或零件。如果您使用
此類配件或零件,保固即會失效。
請勿使電磁爐暴露於高熱、熱瓦斯、蒸氣或濕熱中。請勿將電磁爐置於或靠近運作中
或仍有餘熱的火爐或電子鍋。
拔下電源之前,請務必先關閉電源。
在進行清潔之前,請務必先拔除電器電源插頭並待其冷卻。
本電器用品僅供家用。如果不當使用本產品、作為 (半) 專業用途,或未依照使用手冊
操作,保固將無效,且飛利浦將不擔負任何損壞賠償責任。
電磁爐應置於平穩的水平表面,並確定與周圍至少保持 10 公分的距離,以避免過熱。
為了讓通風良好,請勿在使用產品時擋住進出風口,例如不要在塑膠桌布上使用產
品。
鍋具與加熱面板之間請勿放置任何物品。
電磁爐上可放置最重重量為 8 公斤。
烹調時,或掀開鍋蓋時,請小心漏出的熱氣。
電磁爐運作中請勿舉起或移動電磁爐。
切勿將空的鍋具置於已啟動的電磁爐上,此舉可能使鍋具變形,也可能損壞加熱線
圈。
請勿將易燃物或液體存放在電磁爐附近或電磁爐上。
避免使鍋具或其他物體強力碰撞黑晶加熱面板。
烹煮時請務必將鍋具置於烹調區內。
請勿使用底面直徑大於 16 公分的鍋具來油炸食物,此舉會導致本產品故障。
自動電源關閉
本產品配備自動電源關閉功能,以下兩種情況會自動關閉電源:
在「快速啟動 (手動)」模式與「火鍋」模式,只要 60 分鐘沒有按過任何按鈕就會自動
關閉電源。
若按下開始按鈕時加熱面板上沒有鍋具,或使用了不適用的鍋具,或在烹調時將鍋具
取走,電磁爐會持續發出嗶聲,顯示螢幕會閃爍「--:--」,功率/烹調溫度格也會閃
爍。若 1 分鐘內未把鍋具放回加熱面板,電磁爐就會自動關閉電源。
電磁場(EMF)
本飛利浦產品符合電磁場 (electromagnetic fields,EMF) 所有相關標準。若正確處理及依
照本使用手冊之說明進行操作,根據現有之科學文獻來看,使用本產品並無安全顧慮。
第一次使用前
取下電磁爐所有包裝材料。
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
繁體中文16
使用前準備
1
請將本產品放置在乾燥、穩固且水平的表面。
2 確認本裝置周圍至少保留 10 公分的空間,以預防過熱。
3 烹煮時請務必將鍋具置於烹調區內。
4 請務必使用正確類型、正確尺寸的鍋具 (請見下表)。
建議使用的鍋具類型與尺寸
適用電磁爐的鍋具
材質 鐵製或具磁性的不銹鋼製鍋底
形狀 平底的鍋具
尺寸 鍋底直徑為 12 至 23 公分,視烹調模式而定
(請見下面提示)
重量 含食材最重 8 公斤以內的鍋具
不適用電磁爐的鍋具
材質 鍋底非鐵製,或者是黑晶、玻璃、鋁、銅製的
鍋底
形狀 凸底或凹底的鍋具
尺寸 鍋底直徑小於 11 公分的鍋具
重量 含食材超過 8 公斤的鍋具
提示: 用「快速啟動 (手動)」模式或「火鍋」模式烹煮時,可使用鍋底直徑 12 至 25 公
分的鍋具。
提示: 油炸食物時,建議使用鍋底 12 至 16 公分的鍋具。
注意: 不同材質的鍋具可能需要不同的水量。
使用此電器
切記僅使用適用電磁烹調的鍋具 (請見「使用前準備」單元)。
注意: 請務必在乾燥、平穩且水平的表面放置、操作本產品。
下面表格列出各個烹調模式的預設設定,以及各設定可以調整的程度。
預設與可調整的設定
模式 預設烹調
時間 (分
鐘)
功率 (瓦)/溫
度 (°C) 範
可調整烹
調時間 (分
鐘)
定時功能 控制面板上的指示
快速啟動
(手動)
5 400-2200W 5-60 - 功率格
剩餘烹調時間與功率
格 (如果設定了烹調
時間)
火鍋 - 400-2200W - - 功率格
繁體中文 17
模式 預設烹調
時間 (分
鐘)
功率 (瓦)/溫
度 (°C) 範
可調整烹
調時間 (分
鐘)
定時功能 控制面板上的指示
燜/燉 60 400-1400W 30-180 最多 24
小時
剩餘烹調時間與功率
煲湯/粥 60 400-1400W 30-180 最多 24
小時
剩餘烹調時間與功率
小火蒸 15 2000W 10-40 最多 24
小時
剩餘烹調時間與功率
大火蒸 20 2000W 10-60 最多 24
小時
剩餘烹調時間與功率
煎炒 30 80-240°C 5-60 - 溫度和功率格
燒水 9 2200 瓦 5-30 - 剩餘烹調時間與功率
保溫 30 80°C 15-180 - 剩餘烹調時間
溫奶 10 80°C 3-30 - 剩餘烹調時間
最大火 - 2200 瓦 - - -
注意: 使用「燜/燉」和「煲湯/粥」模式時,電磁爐會先加熱滾過再轉用較低功率;加熱
階段過了之後才能調整功率。
注意: 「蒸」的模式可用來蒸各種食物,如春捲、蒸蛋、排骨、雞肉等。「小火蒸」模式
適合少量食物,如蒸蛋和饅頭;「大火蒸」模式適合大量食物,如排骨和雞肉。
注意: 「燒水」模式可快速滾開食物或水。滾煮時間建議 1 公升用 3 至 5 分鐘,2 公升
用 6 至 10 分鐘,3 公升則用 9 至 14 分鐘。
功率/溫度設定
瓦數 (W) 400 800 1000 1200 1400 1600 1800 2200
溫度 (°C) 80 120 140 160 180 200 220 240
使用不同模式
您可選用快速啟動 (手動) 模式和 9 種預設烹調模式。
1 將電源插頭插入供電插座,然後按下電源開關,啟動電器。 (圖 2)
本產品會發出 2 秒長的嗶聲,電源指示燈會亮起。
功率格會顯示預設的功率 (1400W)。 (圖 3)
2 將鍋具置於烹調區內。
3 按下快速啟動 (手動) 按鈕,或您要使用的預設模式按鈕。 (圖 4)
注意: 有些按鈕您可以選用不同的模式。只要按幾下按鈕,即可選用想要的模式。
相對應的按鈕及模式即會亮燈。 (圖 5)
,
,
,
繁體中文18
本產品會設成快速啟動模式的預設設定 ( 5 分鐘烹調時間,1400W 功率),或設成選定
預定模式的預設設定。
注意: 按下「開始」按鈕決定模式之前仍可切換成另一種模式。如果按了啟動按鈕後要改
用其他模式,就必須先按電源開關把電源關閉,然後再按一次電源開關重新啟動,才能選
擇想要使用的模式。
4 若要用所選模式的預設設定開始烹調,請跳至第 7 步驟。
關於各烹調模式的預設設定,請參考之前的表格。
5 若要調整功率或烹調溫度,請按控制面板右邊的 + 和 - 按鈕。 (圖 6)
有些設定是不可以調整的。關於各模式可調整和不可調整的設定,請見之前表格的資訊。
注意: 烹調時仍然可以調整功率或烹調溫度。
6 若要調整烹調溫度,請按控制面板左邊的 + 和 - 按鈕。 (圖 7)
注意: 如果使用手動模式,則必須在用 + 和 - 按鈕調整烹調時間前,先按下定時按鈕。
注意: 短暫按下 + 和 - 按鈕時,會增加或減少 1 分鐘時間;按鈕按久一點的話,則是增
加減少 5 分鐘。
注意: 烹調時仍然可以調整烹調時間。
7 按一下開始按鈕。 (圖 8)
開始指示燈會亮起。
電磁爐會依所選模式自動開始運作。
注意: 若未調整烹調時間、功率或烹調溫度,電磁爐會依所選模式的預設設定運作。
烹調時,風扇會啟動散熱。關閉電器電源之後,風扇仍會繼續轉動約 1 分鐘,然後會
自動停止。
時間顯示幕會顯示剩下的烹調時間。在此同時,選用的烹調溫度或功率燈會亮
起。 (圖 9)
烹調時間結束時,電器會發出數次嗶聲然後自動關閉電源,電源指示燈也會熄滅。
注意: 若要停止烹調,請按電源開關按鈕即可關閉電器電源。
8 使用完畢後請立即將插頭拔下。
預約烹調
用「預約」按鈕可以設定要何時用指定的預設烹調模式開始烹調。
例如:假設現在時間是 14:00,要設定本產品於 18:00 開始烹調,請設定預約 4.00 (4 小
時) 然後按「開始」按鈕。四小時後時間到 18:00,本產品就會自動開始烹調。
預約功能可用於燜/燉、煲湯/粥、小火蒸和大火蒸模式。
開始時間可設定 5 分鐘至 24 小時。
1 依照「使用不同模式」的步驟 1 至 5 操作。
2 按下定時按鈕。 (圖 10)
預約指示燈會亮起。
3 按下控制面板左邊的 + 和 - 按鈕,設定要產品開始烹調的分鐘或小時數。 (圖 7)
注意: 短暫按下 + 和 - 按鈕時,會增加或減少 1 分鐘時間;按鈕按久一點的話,則是增
加減少 5 分鐘。
注意: 若要調整烹調時間,首先按下定時按鈕,然後按下控制面板左邊的 + 和 - 按鈕。
4 按開始按鈕,開始計時。 (圖 8)
開始指示燈會亮起。
時間顯示幕開發倒數計時。
待烹調開始,預約指示燈就會熄滅,顯示幕也會顯示已經開始烹調。
,
,
,
,
,
,
,
,
,
,
繁體中文 19
清潔與維護
清潔
切勿將電器浸泡在水中,或者在水龍頭下沖洗。
絕對不可使用鋼絲絨、磨蝕性的清潔劑或侵蝕性的液體 (例如汽油或丙酮) 清潔本產品。
切勿讓水晶玻璃加熱面板沾上醋。
1 拔除插頭並讓機器冷卻。
2 用濕布清潔電器,若有必要可使用少許溫和的清潔劑。
保養
使用不當可能會刮傷加熱面板。為避免變色、刮傷,請依本手冊指示使用電器,每次使用
後也請清潔電器和鍋具。
收藏
水晶玻璃加熱面板易碎,請勿重壓。
勿將電器收藏於高溫處,如電子鍋旁。
若將長時間不使用電器,請將電器收藏在乾燥且安全的地方。
環境保護
本產品壽命結束時請勿與一般家庭廢棄物一併丟棄。請將該產品放置於政府指定的回
收站,此舉能為環保盡一份心力。 (圖 11)
保證書與服務
若您需要相關服務或資訊,或是有任何問題,請瀏覽飛利浦網站,網址為
www.philips.com,或連絡您當地的飛利浦顧客服務中心 (您可以在全球保證書上找到連絡
電話)。若您當地沒有顧客服務中心,請洽詢當地的飛利浦經銷商。
故障排除
如果您的電磁爐運作不正常,或烹調品質不佳,請參考下面的表格。如果您無法解決問
題,請連絡您當地的飛利浦服務中心或所在國家的顧客服務中心。
問題 解決方法
電源指示燈不會亮。 接線有問題。請檢查電磁爐是否已插上電線,且插頭已確實插
入牆面插座。
指示燈故障。請將電器送至飛利浦經銷商或飛利浦授權的服務
中心。
按下一個烹調模式按鈕
時,所選模式指示燈不
會亮。
指示燈故障。請將電器送至飛利浦經銷商或飛利浦授權的服務
中心。
設定烹調時間時,定時
指示燈不會亮。
您選用了「火鍋」模式。烹調時間只能在快速使用 (手動) 模式
調整,或是使用預設的燜/燉、煲湯/粥、大火蒸、小火蒸、煎
炒、燒水、溫奶、保溫模式時才可調整。
-
繁體中文20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Philips HD4923/00 ユーザーマニュアル

カテゴリー
小さなキッチン家電
タイプ
ユーザーマニュアル

他の言語で