joyroom JR-ZS290 ユーザーマニュアル

  • Joyroom JR-ZS290 ワイヤレスカーチャージャーホルダーのマニュアルを読みました。このデバイスは、磁気自動アライメント、5W~15Wのワイヤレス充電、通気口への簡単な取り付けなどの機能を備えています。デバイスに関するご質問にお答えしますので、お気軽にご質問ください。
  • JR-ZS290はどのくらいのサイズのスマートフォンに対応していますか?
    充電中にデバイスが熱くなっても大丈夫ですか?
    金属製の保護ケースを使用できますか?
1. Put the ball head into the nut first, then insert it into
the socket on the back of the holder, tighten the nut
clockwise.
Operation steps Note:
3. Use the Type-C charging cable in the package to
connect the holder and the car charger.
4. Place your phone. It will be securely attached to
the charger holder with its auto alignment function.
The product will automatically hold and charge your
iP 12/13 once sensing it. If you don’t want to take off
your phone case, we suggest using magnetic cases.
Please use QC3.0
car charger
Do not disassemble or refit the product.
Do not store it in a wet environment.
Please keep the product away from heat and do not
charge it near a heat source.
Please prevent water or other liquid from entering the
product interface. Otherwise the product may be
damaged.
Do not install the wireless car charger holder over an air
bag cover or within the air bag deployment zone.
During charging, make sure to remove the metallic/
magnetic protective case or cards (like bank cards), etc.
from your device.
During charging, the charger may heat up. This is a
normal occurrence and won’t affect the its performance.
If the charger or your phone gets too hot, please
disconnect the power supply and let it cool down before
restarting the charging process.
Avoid using bent or damaged USB cables.
Warning
1.
2.
3.
4.
5.
6.
7.
8.
请勿自行拆开或改装本产品;
请勿将本产品放在潮湿环境中;
请勿将本产品靠近热源或于热源附近充电;
请勿将水或其他液体流入本产品介面内部,导致本产品
损坏;
不要将无线充电器安装在气囊盖上或安全气囊展开区域;
充电时请务必从你的设备上取下金属磁性保护外壳或卡
(如银行卡等);
充电时有可能产生热量,此乃正常现象,并不会影响产
品表现,如果感到手机或本产品过热请断开电源供应,
待冷却后再尝试充电;
避免使用折曲或损坏的USB线材。
警告
1.
2.
3.
4.
5.
6.
7.
8.
Warranty Card
Model:
Purchase Date:
Distributor:
Warranty
A. If there is performance failure on this product and
it’s not cause by human error, we will provide
12-month free warranty service for consumers from
the date of purchase.
B. Warranty Exceptions
Human damage;
Beyond the warranty period;
Failure to provide valid purchase certificate;
Product damage caused by failure to follow the use,
maintain and storage instructions;
Product damage caused by disassembling or
repairing the product without authorization, or
immerse the product in water;
Damage caused by other force majeure
Customer Name:
Tel.:
Invoice Date:
User address (with postcode):
保修卡
产品型号:
购买日期:
代理商:
用户姓名:
用户电话:
发票日期:
用户地址 (含邮编):
售后服务说明
尊敬的用户,非常感谢您使用我们的产品,为了切实保障你的权益,明确
经销代理商和公司应当承担产品的维修、更换、退货(简称 三包)责任义
务,敬请阅读以下事项:
1. 产品保修卡,是我公司对其产品提供保修期内免费售后服务的必要凭
证。
2. 按照谁销售谁负责三包原则,产品出现质量问题凭(产品保修卡)与经
销商联系,由经销商对客户提供服务,我公司则对经销商提供服务支持。
3.公司承诺,自售出之日(日期以有效,票据日期为准)起七日内出现质
量问题,客户可以选择退货更换及维保修,产品超过保修出现质量问题享
受终身维修(各售后服务点只收取元器件材料费);请客户在购买时与经
销商认真填好(产品保修卡);
4. 下列情形不享受三包服务
① 超过三包期限的
② 未按产品使用说明书要求使用、维修、保管而造成损坏的
③ 非承担三包的维修者拆动造成损坏的
④ 无(产品保修卡)
⑤(产品保修卡)上的内容与产品实物不符或涂改的
⑥ 因不可抗力造成的
5. 以上各事项最终解释权属于本公司所有!
Magnetic Wireless
Car Charger Holder
User Manual
Parameters Product diagram
使用说明书
使用说明书 产品示意图 安装使用 提示:
灯显
流光磁吸无线充支架
Model
Name
Material
Input
Output
Input port
Applicable
phone size
JR-ZS290
Magnetic Wireless Car Charger Holder
ABS+Metal
5V 2A 9V 2A 12V 1.5A
5W/7.5W/10W/15W (MAX)
Type-C
4.7-6.7
产品型号
产品名称
产品材质
输 入
输 出
输入接口
适用尺寸
JR-ZS290
流光磁吸无线充支架
ABS+金属
5V 2A 9V 2A 12V 1.5A
5W/7.5W/10W/15W(MAX
Type-C
4.7-6.7英寸
出风口夹子
通电
待机
充电:
异物检测
字符灯堆叠亮起
字符灯常亮
字符灯灭
字符灯闪烁
Indicator light
LED letters light up respectively
Constant LED letters
LED letters turn off
Flashing LED letters
Power on
Standby
Charging
FOD
Air vent clip hook
Front Back
正面 背面
请使用支持
QC3.0 的车充
1. 将配件的滚球部位穿过旋钮插入产品背部螺栓,顺时针
旋转旋钮拧紧。
3. Type-C 充电线插入产品充电口,连接车载充电器接通电源。
4. 手机靠近无线充支架,磁性吸附,开始充电。
2. Loosen the knob and open the hook, insert the
hook onto vent blade, then fasten the knob.
Open
the hook
tighten
the hook
2. 逆时针旋转旋钮,展开挂钩,将挂钩插入出风口勾住叶
片,然后顺时针旋转旋钮,收紧挂钩。
展开挂钩 收紧挂钩
苹果12/13手机如果带壳使用的话,请使用磁吸壳。
散热孔
LED字符灯
CD镜面面板
旋钮
Heat dissipation hole
LED letters
CD mirror
panel
Knob
FCC statement:
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1) this device may not cause harmful interference, and 2)
this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the users authority to operate the equipment.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter. During the operation of device a
distance of 15 cm surrounding the device and 20 cm above the top surface of the
device must be respected.
/