Zanussi ZWH8104 ユーザーマニュアル

カテゴリー
洗濯機
タイプ
ユーザーマニュアル

このマニュアルも適しています

ZWH8124
ZWH8104
ZWH7854
EN
ZH
WASHING MACHINE
34
USER MANUAL
洗衣机
用户手册
2
...................................................................................
CONTENTS
2 www.zanussi.com
SAFETY INFORMATION
PRODUCT DESCRIPTION
CONTROL PANEL
BEFORE FIRST USE
DAILY USE
WASHING HINTS
INTERNATIONAL WASH CODE SYMBOLS
CARE AND CLEANING
TROUBLESHOOTING
.................................................................................... 3
................................................................................. 6
............................................................................................ 7
....................................................................................... 12
...................................................................................................... 13
............................................................................................ 18
..................................................... 21
.................................................................................... 22
..................................................................................... 25
1
2
3
4
5
6
7
8
9
TECHNICAL DATA .......................................................................................... 2810
INSTALLATION................................................................................................ 2811
ENVIRONMENT CONCERNS .......................................................................... 3412
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Subject to change without notice.
Warning / Caution-Safety information.
General information and tips.
Environmental information.
SAFETY INFORMATION
ENGLISH 3
1.
In the interest of your safety and to ensure the correct use, before
installing and first using the appliance, read this user manual care-
fully, including its hints and warnings.
This appliance is intended to be used in household and similar
applications such as:
Farm houses
By clients in serviced apartments, holiday apartments and
residential type environments.
CONDITIONS OF USE
To avoid unnecessary mistakes and accidents, it is important to
ensure that all people using the appliance are thoroughly familiar
with its operation and safety features.
Save these instructions and make sure that they remain with the
appliance if it is moved or sold, so that everyone using it through its
life will be properly informed on appliance use and safety.
1.1 GENERAL SAFETY
Make sure that small pets do not climb into the drum. To avoid this,
please check into the drum before using the appliance.
Any objects such as coins, safety pins, nails, screws, stones or any other
hard, sharp material can cause extensive damage and must not be placed
into the machine.
Only use the advised quantities of fabric softener and detergent. Damage
to the fabric or appliance can occur if you overfill. Refer to the
manufacturer’s recommendations of quantities.
Wash small items such as socks, laces, washable belts etc in a washing
bag or pillow case as it is possible for such items to slip down between the
tub and the inner drum.
It is dangerous to alter the specifications or attempt to modify this product
in anyway.
During high temperature wash program the door glass may get hot.
Do not touch it!
4
www.zanussi.com
Do not use your washing machine to wash articles with whalebones,
material without hems or torn material.
Always unplug the appliance and turn off the water supply after use, clean
and maintenance.
This appliance is heavy. Care should be taken when moving it.
When unpacking the appliance, check that it is not damaged. If in doubt,
do not use it and contact the Service Centre.
All packing and transit bolts must be removed before use. Serious damage
can occur to the product and to property if this is not adhered to. See
relevant section in the user manual.
After having installed the appliance, check that it is not standing on the
inlet and drain hose and the worktop is not pressing the electrical supply
cable.
If the machine is situated on a carpeted floor, please adjust the feet in
order to allow air to circulate freely.
Always be sure, that there is no water leakage from hoses and their
connections after the installation.
Any plumbing work required to install this appliance should be carried out
by a qualified plumber.
Any electrical work required to install this appliance should be carried out
by a qualified electrician.
Under no circumstances should you attempt to repair the machine
yourself. Repairs carried out by inexperienced persons may cause injury or
serious malfunctioning. Contact your local Service Centre. Always insist on
genuine spare parts.
1.2 INSTALLATION
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
ENGLISH 5
This washing machine is not intended for use by young children or infirm
persons without supervision.
Young children should be supervised to ensure that they do not play with
the appliance.
The packaging components (e.g. plastic film, polystyrene) can be dangerous
to children - danger of suffocation! Keep them out of children’s reach.
Make sure that children or pets do not climb into the drum.
Keep all detergents in a safe place out of children’s reach.
This appliance is designed for domestic use. It must not be used for
purposes other than those for which it was designed.
Only wash fabrics which are designed to be machine washed. Follow the
instructions on each garment label.
Do not overload the appliance. See the relevant section in the user manual.
Before washing, ensure that all pockets are empty and buttons and zips are
fastened. Avoid washing frayed or torn articles and treat stains such as
paint, ink, rust, and grass before washing. Underwired bras must NOT be
machine washed.
Garments which have been in contact with volatile petroleum products
should not be machine washed. If volatile cleaning fluids are used, care
should be taken to ensure that the fluid is removed from the garment before
placing in the machine.
Never pull the power supply cable to remove the plug from the socket;
always take hold of the plug itself.
Never use the washing machine if the power supply cable, the control panel,
the working surface or the base are damaged so that the inside of the
washing machine is accessible.
1.3 USE
1.4 CHILD SAFETY
This machine is provided child lock option ( ) to prevent the children play
with the control panel. (see page 10)
PRODUCT DESCRIPTION2.
1
Worktop
2
Detergent/Softener Dispenser
3
Control Panel
4
Door Handle
5
Door
13
Rating Label
14
Drum Leaf Lifter
7
6
Level Adjustment Feet (Front)
8
Mains Cable
9
Water Inlet Hose
10
Water Drain Hose
11
Hose Support (2pcs)
12
Back Feet (Fixed)
Transit Bolts (3pcs)
6
www.zanussi.com
To connect the drain
hose on the edge of a
sink.
Plastic caps
To close the holes on
the rear side of the
cabinet after the
removal of the transit
bolts.
ACCESSORIES
Plastic hose guide
13
14
This machine is integrated drain design; lint will be drained out and don't need to clean the
filter regularly. If you would like to clean the filter, please contact your local Service
Center.
*
3
4
5
7
2
1
12
6
9
8
11
10
CONTROL PANEL3.
ENGLISH 7
1
On/Off Button ( )
2
3
4
On/Off button is used to turn on
and turn off your washing machine.
Program Touchpads ( )
Press this touchpad to select the
washing program. The relevant light
will light up. (For more information
about washing program, please see
on page 11-12)
Temperature Touchpad ( )
Press this touchpad repeatedly to
increase or decrease the wash
temperature if you want your
laundry to be washed at a
temperature different from the one
proposed by the washing machine.
The relevant light will light up.
Spin Touchpad ( )
Press this touchpad repeatedly to
increase or decrease the spin speed,
if you want your laundry to be spun
at a speed different from the one
proposed by the washing machine.
The relevant light will light up.
This option eliminates all the spin
phases and adds 3 rinses to the
Cottons program and 1 rinse for
another programs.
No Spin
By selecting this option the water of
the last rinse is not emptied out and
the drum turns regularly to prevent
the laundry creases. The door is still
locked to indicate that the water
must be emptied out.
Rinse Hold
The door stays locked with the
water in the drum. To drain the
water refer to relevant
paragraph on page 17.
Different temperatures can be
combined which is dependent
on the program selected.
During a high temperature
cycle you may notice
vapour exiting from the
detergent dispenser drawer
of the washing machine,
this is normal and there is
no cause for alarm.
Different spin speed can be
combined which is dependent
on the program selected.
3.1 Control Panel Description
1 2 3 9 104 5 7 6 8
* Picture of control
panel model:
ZWH8124
5
8
www.zanussi.com
Option Touchpad ( )
Press the option touchpad, if you want
your laundry to be washed with special
functions.
The relevant light will light up.
With this option you can perform
only a last rinse of a selected
washing program.
If you set also the Rinse Plus
function ( ) the appliance adds
two rinses.
If you set also the “No Spin” option,
the appliance only drains.
Rinse & Spin
Use this option for very wet clothes
to remove the water and spin.
Drain & Spin
Different options can be combined
which is dependent on the program
selected.
If you set also the “No Spin” option,
the appliance only rinse.
Delay End Touchpad ( )
Before you start the program, this
option makes it possible to define
the end of the washing program
from minimum 3 hours to maximum
20 hours.
If program duration is longer
than 3 hours minimum Delay
End option starts from 4
hours.
Press the Delay End touchpad to
choose the end time as your wish.
The display shows the number of
hours and the indicator above the
touchpad is on. This option must
be selected after choosing the
wash program, and before pressing
the “Start/Pause” touchpad.
6
NOTE:
With this option you can decrease
the program duration.
Use this option for items with light
soil or items to refresh.
Time Save
Use this option if your clothes are
heavily soiled. The washing cycle
lasts longer with this option.
Heavy Duty
When selecting this option the
laundry is gently washed and spun
to avoid creasing. In this way
ironing is easier.
The appliance decreases the spin
speed, uses more water and
adapts the program duration
to the type of laundry.
Easy Iron
This option will reduce the
working time and the number
of rinses.
If you need to add more rinse
phases, press “ ” + “ ” at
the same time to add “Rinse
Plus” option. (see page 9)
Display
ENGLISH 9
Start/Pause Touchpad ( )
To start the selected program, press
the “Start/Pause ( )”.
To interrupt a program which is
running, press the “Start/Pause ( )”
to pause the machine, t
he Start/Pause
pilot light flashes.
To restart the program from the point
at which it was interrupted, press the
“Start/Pause ( )” again,
the Start/
Pause pilot light will stop flashing.
The display shows the following
information:
When the program is
completed the display
will show “ ”.
Incorrect Option Selection
If an option which is
not compatible with
the set wash program
selected, the display will show
“ ” and flash with 3 consecutive
short beeps.
End Of Program
In the event of operating
problems, some alarm
codes can be
displayed, for example . (see
“Troubleshooting”)
Alarm Codes
Estimated time of the selected
program
After selecting a
program, the estimated
time is displayed in
hours and minutes (for example 3.01).
The estimated time is calculated
automatically on the basis of the
maximum recommended load for
each type of fabric. After the program
has started, the time remaining is
updated every minute.
7
8
For example, if the program duration of
your selected program is 3.20 hours
and you define the “Delay End” time to
6 hours. This means your wash
program will finish in 6 hours. (See
diagram below)
After select Delay End time, press
Start/Pause touchpad to start the
program. Machine will then countdown
and update time on the display every
hours until it reaches the starting point
of the wash cycle.
3.20 hrs.2.80 hrs.
Working Cycle
“Delay End” Time : 6 hrs.
Pressed
Start/Pause
End of
Cycle
Start the
Program
Countdown
If you wish to modify or cancel Delay
End option after starting the program,
follow the steps below:
set the washing machine to PAUSE
by pressing “Start/Pause” touchpad;
-
deselect this option by pressing
Delay End once;
-
press the “Start/Pause” to start the
program.
-
If you want to disable the buzzer
sound (except for event of
appliance malfunction)
,
press
and
hold
“Programs ” and “Temp
” touchpads at the same time
for 3 seconds, and listen for
“BEEP, BEEP”.
Rinse Plus Option ( )
10
www.zanussi.com
This option is recommended for
people who are allergic to
detergents, and in areas where the
water is very soft.
Select this option to add 2 rinses
to a program.
This function increases
the program duration.
Child Lock Option ( )
Your appliance is provided with
CHILD SAFETY LOCK which
permits you to leave the appliance
unsupervised with the door closed
without having to worry that
children might be injured by or
cause damage to the appliance.
Set this option after pressing the
Start/Pause touchpad.
This function remains
enabled even after the
appliance is switched off.
The touchpads are locked
(except for the On/Off
“ ” button).
To set “Child Lock” option:
To set “Rinse Plus” option:
9
10
This function remains
enabled even after the
appliance is switched off.
Press and hold “ ” and “ ”
touchpads at the same time
until the LED “ ”
lights up
.
To deactivate press
and hold
these 2 touchpads at the same
time
until the LED “ ” goes off.
Press and hold “ ” and “ ”
touchpads at the same time until
the LED “ ”
lights up
.
To deactivate press
and hold
these 2 touchpads at the same
time
until the LED “ ” goes off.
Enabling/Disabling Buzzer Sounds
3.2
The program is completed.
The appliance has a malfunction.
The buzzer sounds operate when: To enable the Buzzer press
and
hold
these 2 touchpads at the
same time for 3 seconds, and
listen for “BEEP”.
-
-
ENGLISH 11
3.3 Programs + Options
Program;
Temp.
Cottons;
White and
coloured
cotton with heavy
level of soil.
30 °C
Model
ZWH8124
ZWH8104:
8 kg
Model
ZWH7854:
7.5 kg
ZWH8124:
1200 RPM
ZWH8104:
1000 RPM
ZWH7854:
850 RPM
Model
ZWH8104,
ZWH8124:
4 kg
Model
ZWH7854:
3.5 kg
Program
Description
(type of load and
soil level)
Maximum
Dry Clothes
Capacity
(Model: Max.
kg)
Maximum
Spin Speed
(Model: Max.
RPM)
Options
Rinse & Spin
Drain & Spin
Delay End
Rinse +
Colours;
Synthetic or mixed
fabric items with
normal level of soil.
Delicates;
Fast
Wash;
Delicate fabrics as
acrylics, viscose,
polyester items
with normal soil.
Synthetic and
mixed fabric items.
Light soil and
items to freshen
up.
Bedding;
Special program
for one synthetic
blanket, duvet,
bedspread and
so on.
Woollens
;
Specially tested
program for woollen
garments bearing
the “Pure new
woollen, non-shrink,
machine washable”
label and hand
washing fabrics.
No Spin
Rinse Hold
ZWH8124:
1200 RPM
ZWH8104:
1000 RPM
ZWH7854:
850 RPM
ZWH8124:
1200 RPM
ZWH8104:
1000 RPM
ZWH7854:
850 RPM
ZWH8124:
800 RPM
ZWH8104:
800 RPM
ZWH7854:
600 RPM
ZWH8124:
800 RPM
ZWH8104:
800 RPM
ZWH7854:
600 RPM
ZWH8124:
1000 RPM
ZWH8104:
1000 RPM
ZWH7854:
850 RPM
Model
ZWH8104,
ZWH8124:
4 kg
Model
ZWH7854:
3.5 kg
Model
ZWH8104,
ZWH8124:
2.5 kg
Model
ZWH7854:
2 kg
Model
ZWH8104,
ZWH8124:
4 kg
Model
ZWH7854:
3.5 kg
Model
ZWH8104,
ZWH8124:
3 kg
Model
ZWH7854:
3 kg
Cold ( )
to 90 °C
Cold ( )
to 60 °C
Cold ( )
to 40 °C
Cold ( )
to 40 °C
Cold ( )
to 40 °C
Time Save
Heavy Duty
Easy Iron
Tub
Clean
For cleaning the
wash bowl.
2)
12
www.zanussi.com
BEFORE FIRST USE4.
Ensure that the electrical and water
connections comply with the
installation instructions.
Put 2 litres of water in the detergent
compartment for washing phase.
This activates the drain system.
1.
2.
3.
Select “Cottons” cycle at 90 °C,
without any laundry in the machine,
to remove any manufacturing
residue from the drum and tub then
start the machine.
1) “Energy Saving” program with 60 °C option selected is recommended for a full load of normally soiled
cottons.
Program;
Temp.
ECO;
40 °C and
60 °C
1)
White and
colourfast, cotton
with normal soil.
Set this program
to have a good
washing results
and decrease the
energy consump-
tion. The time of
the washing
program is
extended;
Program
Description
(type of load
and soil level)
Options
ZWH8124:
1200 RPM
ZWH8104:
1000 RPM
ZWH7854:
850 RPM
Rinse & Spin
Drain & Spin
Delay End
Rinse +
No Spin
Rinse Hold
Model
ZWH8104,
ZWH8124:
8 kg
Model
ZWH7854:
7.5 kg
Maximum
Dry Clothes
Capacity
(Model: Max.
kg)
Maximum
Spin Speed
(Model: Max.
RPM)
2) Default option for “Tub Clean” program, cannot disable this option.
Time Save
Heavy Duty
Easy Iron
ENGLISH 13
DAILY USE5.
Connect the mains plug to the mains
socket.
Turn the water tap on.
Place the laundry in the drum, one
item at a time, shaking them out as
much as possible.
3.
Open the door by carefully pulling
the door handle outwards.
Check and remove objects (if there
are any) that could be trapped in the
fold.
2.
Close the door and make sure that
no laundry remains between the seal
and the door. There is a risk of water
leakage or damage to the machine
and your laundry.
4.
Step 1 - Loading The Laundry
5.1 Four Steps Start Up Guide
1.
Make sure that you wash lint
collectors separately from lint
producers.
IMPORTANT!
Button up pillowcases, close zip
fasteners, hooks and poppers.
Tie any belts or long tapes.
Make sure that no metal objects
are left in the laundry (e.g. hair
clips, safety pins, pins).
Wash bras, pantyhose and other
delicates in a mesh laundry bag,
which you can purchase from
your supermarket.
Measure out the amount of
detergent required, pour it into
the main wash compartment
( ).
Step 2 - Using Detergent And Additives
14
www.zanussi.com
Detergent Dispenser Drawer
1.
The detergent dispenser is divided into
two compartments.
Compartment “SOFTENER”
This compartment is used for fabric
conditioner and starching agent.
-
Compartment “DETERGENT”
This compartment is used for
detergent on all programs.
-
Powder or liquid detergent ( )
Position down: for liquid detergent.
Position up: for powder detergent
(factory setting).
Do not use gelatinous or thick
liquid detergents.
-
Do not put more liquid than the
maximum level.
-
Do not set the DELAY END.
-
When you use the liquid
detergent:
Pull out the dispenser drawer
until it stops.
-
-
Measure out the detergent and the
fabric softener;
2.
ENGLISH 15
If required, pour fabric softener
into the compartment marked
(the amount used must not
exceed the “MAX” mark in the
drawer).
-
Close the drawer gently.
-
After washing cycle finish,
residues of detergent,
softener and water may
remain in the dispenser. It
is recommended to clean
the dispenser regularly to
remove any residue.
If you use thick softeners it
is recommended to dilute
with water.
Pess the Spin “ ” and the tempera-
ture “ ” touchpads repeatedly to
change the spin speed and tempera-
ture.
Step 3 - Setting A Program For Washing
1.
Press the On/Off button
to turn on the washing
machine. The indicator of
the “Start/Pause”
touchpad flashes.
3.
If you want your laundry
to be spun or use
temperature different
from the one proposed
by the washing machine.
4.
Press this touchpad, if you
want your laundry to be
washed with special
functions. The relevant
light will light up.
Different functions can be
combined which is dependent
on the program selected.
2.
Press the Program
touchpad, to choose the
wash program you
require.
(For more
information about
washing programs,
please see page 11-12)
-
The display shows the program
duration.
-
5.
The relevant light will light up.
If you want to reduce washing
time, select the Time Save*
option to reduce washing time.
(* this option suitable for
light
soil items or items need to
refresh
)
If you want
to define the end of the
washing program
, press the “Delay
End ( )” touchpad repeatedly to
choose your washing machine
working time.
16
www.zanussi.com
Step 4 - Starting a program
To start a program, press the Start/Pause ( ) touchpad, the
corresponding pilot light will stop flashing and a default program
duration will be displayed on the screen.
To pause press Start/Pause. The
indicator will start flashing.
Press the Start/Pause again. The
program will continue.
Changing a running program is possible
only by switching off the appliance.
Press the “On/Off” button to cancel the
program and to turn off the appliance.
5.2 Interruption Of A Program
5.3 Changing A Program
It is possible to change only some
option after the program has
started.
Press the touchpad Start/Pause. The
indicator will start flashing.
1.
Change the options.2.
Press Start/Pause again. The program
will continue.
3.
While a program or the Delay End
is operating, the appliance door is
locked and the door lock indicator
“ ” is on.
First set the machine to PAUSE by
pressing the “Start/Pause”
touchpad. Wait until the door lock
indicator “ ” goes off, then the
door can be opened.
If the door lock indicator “ ”
does not disappear, this means
that the machine is already
heating and the water level is
above the bottom edge of the
door or the drum is turning. In
this case the door CAN NOT be
opened. If you need to open it, you
must drain the water to open the
door.
To drain the water, you have to
switch the machine off by pressing
the “On/Off” button to deactivate
the appliance. Turn On the
machine and select “Drain & Spin”
option, then press Start/Pause
touchpad to start the program.
Press the “On/Off” button again to
start the appliance. Now, you can set a
new washing program.
The appliance will not drain the
water.
5.4 Changing The Options
5.5 Opening The Door
You can select “No Spin”, if
you want the machine to
only drain the water.
After starting the washing program the dot ( ) on the display starts
to flash.
The appliance will automatically adjust the selected program
duration according to the type and size of the load
(
approximately 15
minutes
)
.
When this phase ends the dot ( ) lights up fixed and t
he
display will show adjusted program duration.
NOTE
ENGLISH 17
When the program is completed
and the door lock indicator “ ”
goes off, you can open the door.
When The Washing Program
Is Completed, But There Is
Water In The Drum (Option
“Rinse Hold ” is used)
The drum turns regularly to
prevent the creases in the
laundry.
You must drain the water to open
the door.
The door lock indicator “ ” is
on. The door stays locked.
5.6
The appliance stops automatically.
The acoustic signal will operate.
The display will show “ ”.
The indicator of the “Start/Pause”
touchpad goes off.
The door lock indicator “ ”
goes off.
Remove the laundry from the
appliance. Make sure that the
drum is empty.
Keep the door and the detergent
drawer ajar, to prevent the
mildew and odours.
Turn off the water tap.
5.7 At The End Of The Program
The indicator “Start/Pause”
flashes to remind you to drain
the water.
When the program is completed
and the door lock indicator “ ”
goes off, you can open the door.
1.
To drain the water:
NOTE
Alternatively, before pressing the
“Start/Pause” touchpad, you can
press the “Spin ” touchpad to
change the spin speed. You can
select “No Spin”, if you want the
machine to only drain the water,
then press the Start/Pause
touchpad. The appliance will drain
the water and spin.
Press the “Start/Pause ”
touchpad. The appliance
drains the water and spins with
the maximum spin speed for
selected program.
2.
Press the “On/Off” button to
deactivate the appliance.
3.
After approximately 18 hours
if you do not press
Start/Pause touchpad, the
appliance will drain and spin
automatically (except for
Woollens program) .
At the end of the program
the time remaining can
suddenly decrease from 7
minutes or less to 0 due to
the overestimated total
program time during the load
sensing phase.
In some cases (with perfectly
balanced load) the program
time can be shorter than the
time estimated after the load
sensing phase is completed.
This is a normal behavior of
the machine and not a cause
for concern as it does not
compromise its performance.
18
www.zanussi.com
AUTO Stand-By Option
5.8
WASHING HINTS6.
Follow the wash code symbols on
each garment label and the
manufacturer’s washing
instructions. Sort the laundry as
follows: whites, coloureds,
synthetics, delicates, woollens.
6.1 Sorting The Laundry
6.2 Temperatures
90°C
60°C
50°C
40°C
30°C
Cold
For normally soiled,
colourfast garments (e.g.
shirts, night dresses,
pyjamas....) in linen, cotton
or synthetic fibres and for
lightly soiled white cotton
(e.g.underwear).
For delicate items (e.g. net
curtains), mixed laundry
including synthetic fibres
and woollens bearing the
label pure new wool,
machine washable,
non-shrink.
For heavily or normally
soiled white cottons and
linen (e.g. teacloths, towels,
tablecloths, sheets...).
Never wash whites and coloureds
together. Whites may lose their
“whiteness” in the wash.
New coloured items may run in the
first wash; they should therefore be
washed separately the first time.
Button up pillowcases, close zip
fasteners, hooks and poppers. Tie
any belts or long tapes.
Remove persistent stains before
washing.
Rub particularly soiled areas with a
special detergent or detergent paste.
Treat curtains with special care.
Remove hooks or tie them up in a
bag or a net.
Make sure that no metal objects
are left in the laundry (e.g. hair
clips, safety pins, pins).
6.3 Before Loading The
Laundry
The AUTO Stand-by option
automatically deactivates the
appliance to decrease the energy
consumption when:
You do not press any touch-
pads for 5 minutes before you
press “Start/Pause”.
Press the “On/Off” button
to activate the appliance
again.
After 5 minutes from the end of
the washing program.
Press the “On/Off” button
to activate the appliance
again.
ENGLISH 19
Recommended loads are indicated
in the program charts. General
rules:
Washing a maximum load makes
the most efficient use of water and
energy. For heavily soiled laundry,
reduce the load size.
Cotton, linen:
drum full but not
too tightly packed;
Synthetics,
Delicate:
drum no more
than half full;
woollens:
drum no more
than one third full.
6.4 Maximum Loads
Blood: treat fresh stains with cold
water. For dried stains, soak
overnight in water with a special
detergent then rub in the soap and
water.
Oil based paint: moisten with
benzine stain remover, lay the
garment on a soft cloth and dab
the stain; treat several times.
Dried grease stains: moisten with
turpentine, lay the garment on a
soft surface and dab the stain with
the fingertips and a cotton cloth.
Stubborn stains may not be
removed by just water and
detergent. It is therefore advisable
to treat them prior to washing.
6.5 Removing Stains
Rust: oxalic acid dissolved in hot
water or a rust removing product
used in cold water. Be careful with
rust stains which are not recent
since the cellulose structure will
already have been damaged and
the fabric tends to hole.
Mould stains: treat with bleach,
rinse well (whites and fast
coloureds only).
Grass: soap lightly and treat with
bleach (whites and fast coloureds
only).
Ball point pen and glue: moisten
with acetone (*), lay the garment on
a soft cloth and dab the stain.
Lipstick: moisten with acetone (*)
as above, then treat stains with
methylated spirits. Remove any
residual marks from white fabrics
with bleach.
Red wine: soak in water and
detergent, rinse and treat with
acetic or citric acid, then rinse.
Treat any residual marks with
bleach.
Ink: depending on the type of ink,
moisten the fabric first with
acetone (*), then with acetic acid;
treat any residual marks on white
fabrics with bleach and then rinse
thoroughly.
Tar stains: first treat with stain
remover, methylated spirits or
benzine, then rub with detergent
paste.
Good washing results also depend
on the choice of detergent and use
of the correct quantities to avoid
waste and protect the
environment.
Although biodegradable, detergents
contain substances which, in large
quantities, can upset the delicate
balance of nature.
(*) do not use acetone on artificial
silk.
6.6 Detergents and Additives
20
www.zanussi.com
The detergent and any additives
must be placed in the appropriate
compartments of the dispenser
drawer before starting the wash
program.
The choice of detergent will depend
on the type of fabric (delicates,
woollens, cottons, etc.), the colour,
washing temperature and degree of
soiling.
Only low suds Front load washer
detergents should be used in
this appliance:
powder detergents for all types
of fabric,
powder detergents for delicate
fabrics (60 °C max) and woollens,
liquid detergents, preferably for
low temperature wash program
(60 °C max) for all types of fabric,
or special for woollens only.
Pour liquid detergent into the
dispenser drawer compartment
marked “ ” just before starting
the program.
the washload to turn grey,
greasy clothes.
sudsing,
inadequate rinsing.
reduced washing effect,
Any fabric softener or starching
additives must be poured into the
compartment marked “ ” before
starting the wash program.
Follow the product manufacturer’s
recommendations on quantities to
use and do not exceed the MAX
mark in the detergent dispenser
drawer.
The type and quantity of detergent
will depend on the type of fabric,
load size, degree of soiling and
hardness of the water used.
Do not spray stain
pre-treatment products (e.g.
Preen) on or near the machine,
as it can attack plastic
materials reducing its life.
Information on hardness of the
water in your area can be obtained
from the relevant water supply
company, or from your local
authority.
Follow the product manufacturers’
instructions on quantities to use.
Water hardness is classified in
so-called “degrees” of hardness.
6.7 Quantity of Detergent To Be
Used
Not enough washing powder
causes:
Too much washing powder
causes:
you are washing a small load,
large amounts of foam form
during washing.
the laundry is lightly soiled,
Use less detergent if:
NOTE:
Use only front load type
detergents and reduce the
amount of detergent if
oversudsing occurs.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68

Zanussi ZWH8104 ユーザーマニュアル

カテゴリー
洗濯機
タイプ
ユーザーマニュアル
このマニュアルも適しています

他の言語で