Electrolux ZWH8104 ユーザーマニュアル

ZWH8124

ZWH8104

ZWH7854

EN

ZH

WASHING MACHINE

34

USER MANUAL

洗衣机

用户手册

2

...................................................................................

CONTENTS

2 www.zanussi.com

SAFETY INFORMATION

PRODUCT DESCRIPTION

CONTROL PANEL

BEFORE FIRST USE

DAILY USE

WASHING HINTS

INTERNATIONAL WASH CODE SYMBOLS

CARE AND CLEANING

TROUBLESHOOTING

.................................................................................... 3

................................................................................. 6

............................................................................................ 7

....................................................................................... 12

...................................................................................................... 13

............................................................................................ 18

..................................................... 21

.................................................................................... 22

..................................................................................... 25

1

2

3

4

5

6

7

8

9

TECHNICAL DATA .......................................................................................... 2810

INSTALLATION................................................................................................ 2811

ENVIRONMENT CONCERNS .......................................................................... 3412

CUSTOMER CARE AND SERVICE

We recommend the use of original spare parts.

When contacting Service, ensure that you have the following data available.

The information can be found on the rating plate. Model, PNC, Serial Number.

Subject to change without notice.

Warning / Caution-Safety information.

General information and tips.

Environmental information.

SAFETY INFORMATION

ENGLISH 3

1.

In the interest of your safety and to ensure the correct use, before

installing and first using the appliance, read this user manual care-

fully, including its hints and warnings.

This appliance is intended to be used in household and similar

applications such as:

Farm houses

By clients in serviced apartments, holiday apartments and

residential type environments.

CONDITIONS OF USE

To avoid unnecessary mistakes and accidents, it is important to

ensure that all people using the appliance are thoroughly familiar

with its operation and safety features.

Save these instructions and make sure that they remain with the

appliance if it is moved or sold, so that everyone using it through its

life will be properly informed on appliance use and safety.

1.1 GENERAL SAFETY

Make sure that small pets do not climb into the drum. To avoid this,

please check into the drum before using the appliance.

Any objects such as coins, safety pins, nails, screws, stones or any other

hard, sharp material can cause extensive damage and must not be placed

into the machine.

Only use the advised quantities of fabric softener and detergent. Damage

to the fabric or appliance can occur if you overfill. Refer to the

manufacturer’s recommendations of quantities.

Wash small items such as socks, laces, washable belts etc in a washing

bag or pillow case as it is possible for such items to slip down between the

tub and the inner drum.

It is dangerous to alter the specifications or attempt to modify this product

in anyway.

During high temperature wash program the door glass may get hot.

Do not touch it!

4

www.zanussi.com

Do not use your washing machine to wash articles with whalebones,

material without hems or torn material.

Always unplug the appliance and turn off the water supply after use, clean

and maintenance.

This appliance is heavy. Care should be taken when moving it.

When unpacking the appliance, check that it is not damaged. If in doubt,

do not use it and contact the Service Centre.

All packing and transit bolts must be removed before use. Serious damage

can occur to the product and to property if this is not adhered to. See

relevant section in the user manual.

After having installed the appliance, check that it is not standing on the

inlet and drain hose and the worktop is not pressing the electrical supply

cable.

If the machine is situated on a carpeted floor, please adjust the feet in

order to allow air to circulate freely.

Always be sure, that there is no water leakage from hoses and their

connections after the installation.

Any plumbing work required to install this appliance should be carried out

by a qualified plumber.

Any electrical work required to install this appliance should be carried out

by a qualified electrician.

Under no circumstances should you attempt to repair the machine

yourself. Repairs carried out by inexperienced persons may cause injury or

serious malfunctioning. Contact your local Service Centre. Always insist on

genuine spare parts.

1.2 INSTALLATION

This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

ENGLISH 5

This washing machine is not intended for use by young children or infirm

persons without supervision.

Young children should be supervised to ensure that they do not play with

the appliance.

The packaging components (e.g. plastic film, polystyrene) can be dangerous

to children - danger of suffocation! Keep them out of children’s reach.

Make sure that children or pets do not climb into the drum.

Keep all detergents in a safe place out of children’s reach.

This appliance is designed for domestic use. It must not be used for

purposes other than those for which it was designed.

Only wash fabrics which are designed to be machine washed. Follow the

instructions on each garment label.

Do not overload the appliance. See the relevant section in the user manual.

Before washing, ensure that all pockets are empty and buttons and zips are

fastened. Avoid washing frayed or torn articles and treat stains such as

paint, ink, rust, and grass before washing. Underwired bras must NOT be

machine washed.

Garments which have been in contact with volatile petroleum products

should not be machine washed. If volatile cleaning fluids are used, care

should be taken to ensure that the fluid is removed from the garment before

placing in the machine.

Never pull the power supply cable to remove the plug from the socket;

always take hold of the plug itself.

Never use the washing machine if the power supply cable, the control panel,

the working surface or the base are damaged so that the inside of the

washing machine is accessible.

1.3 USE

1.4 CHILD SAFETY

This machine is provided child lock option ( ) to prevent the children play

with the control panel. (see page 10)

PRODUCT DESCRIPTION2.

1

Worktop

2

Detergent/Softener Dispenser

3

Control Panel

4

Door Handle

5

Door

13

Rating Label

14

Drum Leaf Lifter

7

6

Level Adjustment Feet (Front)

8

Mains Cable

9

Water Inlet Hose

10

Water Drain Hose

11

Hose Support (2pcs)

12

Back Feet (Fixed)

Transit Bolts (3pcs)

6

www.zanussi.com

To connect the drain

hose on the edge of a

sink.

Plastic caps

To close the holes on

the rear side of the

cabinet after the

removal of the transit

bolts.

ACCESSORIES

Plastic hose guide

13

14

This machine is integrated drain design; lint will be drained out and don't need to clean the

filter regularly. If you would like to clean the filter, please contact your local Service

Center.

*

3

4

5

7

2

1

12

6

9

8

11

10

CONTROL PANEL3.

ENGLISH 7

1

On/Off Button ( )

2

3

4

On/Off button is used to turn on

and turn off your washing machine.

Program Touchpads ( )

Press this touchpad to select the

washing program. The relevant light

will light up. (For more information

about washing program, please see

on page 11-12)

Temperature Touchpad ( )

Press this touchpad repeatedly to

increase or decrease the wash

temperature if you want your

laundry to be washed at a

temperature different from the one

proposed by the washing machine.

The relevant light will light up.

Spin Touchpad ( )

Press this touchpad repeatedly to

increase or decrease the spin speed,

if you want your laundry to be spun

at a speed different from the one

proposed by the washing machine.

The relevant light will light up.

This option eliminates all the spin

phases and adds 3 rinses to the

Cottons program and 1 rinse for

another programs.

No Spin

By selecting this option the water of

the last rinse is not emptied out and

the drum turns regularly to prevent

the laundry creases. The door is still

locked to indicate that the water

must be emptied out.

Rinse Hold

The door stays locked with the

water in the drum. To drain the

water refer to relevant

paragraph on page 17.

Different temperatures can be

combined which is dependent

on the program selected.

During a high temperature

cycle you may notice

vapour exiting from the

detergent dispenser drawer

of the washing machine,

this is normal and there is

no cause for alarm.

Different spin speed can be

combined which is dependent

on the program selected.

3.1 Control Panel Description

1 2 3 9 104 5 7 6 8

* Picture of control

panel model:

ZWH8124

5

8

www.zanussi.com

Option Touchpad ( )

Press the option touchpad, if you want

your laundry to be washed with special

functions.

The relevant light will light up.

With this option you can perform

only a last rinse of a selected

washing program.

If you set also the Rinse Plus

function ( ) the appliance adds

two rinses.

If you set also the “No Spin” option,

the appliance only drains.

Rinse & Spin

Use this option for very wet clothes

to remove the water and spin.

Drain & Spin

Different options can be combined

which is dependent on the program

selected.

If you set also the “No Spin” option,

the appliance only rinse.

Delay End Touchpad ( )

Before you start the program, this

option makes it possible to define

the end of the washing program

from minimum 3 hours to maximum

20 hours.

If program duration is longer

than 3 hours minimum Delay

End option starts from 4

hours.

Press the Delay End touchpad to

choose the end time as your wish.

The display shows the number of

hours and the indicator above the

touchpad is on. This option must

be selected after choosing the

wash program, and before pressing

the “Start/Pause” touchpad.

6

NOTE:

With this option you can decrease

the program duration.

Use this option for items with light

soil or items to refresh.

Time Save

Use this option if your clothes are

heavily soiled. The washing cycle

lasts longer with this option.

Heavy Duty

When selecting this option the

laundry is gently washed and spun

to avoid creasing. In this way

ironing is easier.

The appliance decreases the spin

speed, uses more water and

adapts the program duration

to the type of laundry.

Easy Iron

This option will reduce the

working time and the number

of rinses.

If you need to add more rinse

phases, press “ ” + “ ” at

the same time to add “Rinse

Plus” option. (see page 9)

Display

ENGLISH 9

Start/Pause Touchpad ( )

To start the selected program, press

the “Start/Pause ( )”.

To interrupt a program which is

running, press the “Start/Pause ( )”

to pause the machine, t

he Start/Pause

pilot light flashes.

To restart the program from the point

at which it was interrupted, press the

“Start/Pause ( )” again,

the Start/

Pause pilot light will stop flashing.

The display shows the following

information:

When the program is

completed the display

will show “ ”.

Incorrect Option Selection

If an option which is

not compatible with

the set wash program

selected, the display will show

“ ” and flash with 3 consecutive

short beeps.

End Of Program

In the event of operating

problems, some alarm

codes can be

displayed, for example . (see

“Troubleshooting”)

Alarm Codes

Estimated time of the selected

program

After selecting a

program, the estimated

time is displayed in

hours and minutes (for example 3.01).

The estimated time is calculated

automatically on the basis of the

maximum recommended load for

each type of fabric. After the program

has started, the time remaining is

updated every minute.

7

8

For example, if the program duration of

your selected program is 3.20 hours

and you define the “Delay End” time to

6 hours. This means your wash

program will finish in 6 hours. (See

diagram below)

After select Delay End time, press

Start/Pause touchpad to start the

program. Machine will then countdown

and update time on the display every

hours until it reaches the starting point

of the wash cycle.

3.20 hrs.2.80 hrs.

Working Cycle

“Delay End” Time : 6 hrs.

Pressed

Start/Pause

End of

Cycle

Start the

Program

Countdown

If you wish to modify or cancel Delay

End option after starting the program,

follow the steps below:

set the washing machine to PAUSE

by pressing “Start/Pause” touchpad;

-

deselect this option by pressing

Delay End once;

-

press the “Start/Pause” to start the

program.

-

If you want to disable the buzzer

sound (except for event of

appliance malfunction)

,

press

and

hold

“Programs ” and “Temp

” touchpads at the same time

for 3 seconds, and listen for

“BEEP, BEEP”.

Rinse Plus Option ( )

10

www.zanussi.com

This option is recommended for

people who are allergic to

detergents, and in areas where the

water is very soft.

Select this option to add 2 rinses

to a program.

This function increases

the program duration.

Child Lock Option ( )

Your appliance is provided with

CHILD SAFETY LOCK which

permits you to leave the appliance

unsupervised with the door closed

without having to worry that

children might be injured by or

cause damage to the appliance.

Set this option after pressing the

Start/Pause touchpad.

This function remains

enabled even after the

appliance is switched off.

The touchpads are locked

(except for the On/Off

“ ” button).

To set “Child Lock” option:

To set “Rinse Plus” option:

9

10

This function remains

enabled even after the

appliance is switched off.

Press and hold “ ” and “ ”

touchpads at the same time

until the LED “ ”

lights up

.

To deactivate press

and hold

these 2 touchpads at the same

time

until the LED “ ” goes off.

Press and hold “ ” and “ ”

touchpads at the same time until

the LED “ ”

lights up

.

To deactivate press

and hold

these 2 touchpads at the same

time

until the LED “ ” goes off.

Enabling/Disabling Buzzer Sounds

3.2

The program is completed.

The appliance has a malfunction.

The buzzer sounds operate when: To enable the Buzzer press

and

hold

these 2 touchpads at the

same time for 3 seconds, and

listen for “BEEP”.

-

ENGLISH 11

3.3 Programs + Options

Program;

Temp.

Cottons;

White and

coloured

cotton with heavy

level of soil.

30 °C

Model

ZWH8124

ZWH8104:

8 kg

Model

ZWH7854:

7.5 kg

ZWH8124:

1200 RPM

ZWH8104:

1000 RPM

ZWH7854:

850 RPM

Model

ZWH8104,

ZWH8124:

4 kg

Model

ZWH7854:

3.5 kg

Program

Description

(type of load and

soil level)

Maximum

Dry Clothes

Capacity

(Model: Max.

kg)

Maximum

Spin Speed

(Model: Max.

RPM)

Options

Rinse & Spin

Drain & Spin

Delay End

Rinse +

Colours;

Synthetic or mixed

fabric items with

normal level of soil.

Delicates;

Fast

Wash;

Delicate fabrics as

acrylics, viscose,

polyester items

with normal soil.

Synthetic and

mixed fabric items.

Light soil and

items to freshen

up.

Bedding;

Special program

for one synthetic

blanket, duvet,

bedspread and

so on.

Woollens

;

Specially tested

program for woollen

garments bearing

the “Pure new

woollen, non-shrink,

machine washable”

label and hand

washing fabrics.

No Spin

Rinse Hold

ZWH8124:

1200 RPM

ZWH8104:

1000 RPM

ZWH7854:

850 RPM

ZWH8124:

1200 RPM

ZWH8104:

1000 RPM

ZWH7854:

850 RPM

ZWH8124:

800 RPM

ZWH8104:

800 RPM

ZWH7854:

600 RPM

ZWH8124:

800 RPM

ZWH8104:

800 RPM

ZWH7854:

600 RPM

ZWH8124:

1000 RPM

ZWH8104:

1000 RPM

ZWH7854:

850 RPM

Model

ZWH8104,

ZWH8124:

4 kg

Model

ZWH7854:

3.5 kg

Model

ZWH8104,

ZWH8124:

2.5 kg

Model

ZWH7854:

2 kg

Model

ZWH8104,

ZWH8124:

4 kg

Model

ZWH7854:

3.5 kg

Model

ZWH8104,

ZWH8124:

3 kg

Model

ZWH7854:

3 kg

Cold ( )

to 90 °C

Cold ( )

to 60 °C

Cold ( )

to 40 °C

Cold ( )

to 40 °C

Cold ( )

to 40 °C

Time Save

Heavy Duty

Easy Iron

Tub

Clean

For cleaning the

wash bowl.

2)

12

www.zanussi.com

BEFORE FIRST USE4.

Ensure that the electrical and water

connections comply with the

installation instructions.

Put 2 litres of water in the detergent

compartment for washing phase.

This activates the drain system.

1.

2.

3.

Select “Cottons” cycle at 90 °C,

without any laundry in the machine,

to remove any manufacturing

residue from the drum and tub then

start the machine.

1) “Energy Saving” program with 60 °C option selected is recommended for a full load of normally soiled

cottons.

Program;

Temp.

ECO;

40 °C and

60 °C

1)

White and

colourfast, cotton

with normal soil.

Set this program

to have a good

washing results

and decrease the

energy consump-

tion. The time of

the washing

program is

extended;

Program

Description

(type of load

and soil level)

Options

ZWH8124:

1200 RPM

ZWH8104:

1000 RPM

ZWH7854:

850 RPM

Rinse & Spin

Drain & Spin

Delay End

Rinse +

No Spin

Rinse Hold

Model

ZWH8104,

ZWH8124:

8 kg

Model

ZWH7854:

7.5 kg

Maximum

Dry Clothes

Capacity

(Model: Max.

kg)

Maximum

Spin Speed

(Model: Max.

RPM)

2) Default option for “Tub Clean” program, cannot disable this option.

Time Save

Heavy Duty

Easy Iron

ENGLISH 13

DAILY USE5.

Connect the mains plug to the mains

socket.

Turn the water tap on.

Place the laundry in the drum, one

item at a time, shaking them out as

much as possible.

3.

Open the door by carefully pulling

the door handle outwards.

Check and remove objects (if there

are any) that could be trapped in the

fold.

2.

Close the door and make sure that

no laundry remains between the seal

and the door. There is a risk of water

leakage or damage to the machine

and your laundry.

4.

Step 1 - Loading The Laundry

5.1 Four Steps Start Up Guide

1.

Make sure that you wash lint

collectors separately from lint

producers.

IMPORTANT!

Button up pillowcases, close zip

fasteners, hooks and poppers.

Tie any belts or long tapes.

Make sure that no metal objects

are left in the laundry (e.g. hair

clips, safety pins, pins).

Wash bras, pantyhose and other

delicates in a mesh laundry bag,

which you can purchase from

your supermarket.

Measure out the amount of

detergent required, pour it into

the main wash compartment

( ).

Step 2 - Using Detergent And Additives

14

www.zanussi.com

Detergent Dispenser Drawer

1.

The detergent dispenser is divided into

two compartments.

Compartment “SOFTENER”

This compartment is used for fabric

conditioner and starching agent.

-

Compartment “DETERGENT”

This compartment is used for

detergent on all programs.

-

Powder or liquid detergent ( )

Position down: for liquid detergent.

Position up: for powder detergent

(factory setting).

Do not use gelatinous or thick

liquid detergents.

-

Do not put more liquid than the

maximum level.

-

Do not set the DELAY END.

-

When you use the liquid

detergent:

Pull out the dispenser drawer

until it stops.

-

Measure out the detergent and the

fabric softener;

2.

ENGLISH 15

If required, pour fabric softener

into the compartment marked

(the amount used must not

exceed the “MAX” mark in the

drawer).

-

Close the drawer gently.

-

After washing cycle finish,

residues of detergent,

softener and water may

remain in the dispenser. It

is recommended to clean

the dispenser regularly to

remove any residue.

If you use thick softeners it

is recommended to dilute

with water.

Pess the Spin “ ” and the tempera-

ture “ ” touchpads repeatedly to

change the spin speed and tempera-

ture.

Step 3 - Setting A Program For Washing

1.

Press the On/Off button

to turn on the washing

machine. The indicator of

the “Start/Pause”

touchpad flashes.

3.

If you want your laundry

to be spun or use

temperature different

from the one proposed

by the washing machine.

4.

Press this touchpad, if you

want your laundry to be

washed with special

functions. The relevant

light will light up.

Different functions can be

combined which is dependent

on the program selected.

2.

Press the Program

touchpad, to choose the

wash program you

require.

(For more

information about

washing programs,

please see page 11-12)

-

The display shows the program

duration.

-

5.

The relevant light will light up.

If you want to reduce washing

time, select the Time Save*

option to reduce washing time.

(* this option suitable for

light

soil items or items need to

refresh

)

If you want

to define the end of the

washing program

, press the “Delay

End ( )” touchpad repeatedly to

choose your washing machine

working time.

16

www.zanussi.com

Step 4 - Starting a program

To start a program, press the Start/Pause ( ) touchpad, the

corresponding pilot light will stop flashing and a default program

duration will be displayed on the screen.

To pause press Start/Pause. The

indicator will start flashing.

Press the Start/Pause again. The

program will continue.

Changing a running program is possible

only by switching off the appliance.

Press the “On/Off” button to cancel the

program and to turn off the appliance.

5.2 Interruption Of A Program

5.3 Changing A Program

It is possible to change only some

option after the program has

started.

Press the touchpad Start/Pause. The

indicator will start flashing.

1.

Change the options.2.

Press Start/Pause again. The program

will continue.

3.

While a program or the Delay End

is operating, the appliance door is

locked and the door lock indicator

“ ” is on.

First set the machine to PAUSE by

pressing the “Start/Pause”

touchpad. Wait until the door lock

indicator “ ” goes off, then the

door can be opened.

If the door lock indicator “ ”

does not disappear, this means

that the machine is already

heating and the water level is

above the bottom edge of the

door or the drum is turning. In

this case the door CAN NOT be

opened. If you need to open it, you

must drain the water to open the

door.

To drain the water, you have to

switch the machine off by pressing

the “On/Off” button to deactivate

the appliance. Turn On the

machine and select “Drain & Spin”

option, then press Start/Pause

touchpad to start the program.

Press the “On/Off” button again to

start the appliance. Now, you can set a

new washing program.

The appliance will not drain the

water.

5.4 Changing The Options

5.5 Opening The Door

You can select “No Spin”, if

you want the machine to

only drain the water.

After starting the washing program the dot ( ) on the display starts

to flash.

The appliance will automatically adjust the selected program

duration according to the type and size of the load

(

approximately 15

minutes

)

.

When this phase ends the dot ( ) lights up fixed and t

he

display will show adjusted program duration.

NOTE

ENGLISH 17

When the program is completed

and the door lock indicator “ ”

goes off, you can open the door.

When The Washing Program

Is Completed, But There Is

Water In The Drum (Option

“Rinse Hold ” is used)

The drum turns regularly to

prevent the creases in the

laundry.

You must drain the water to open

the door.

The door lock indicator “ ” is

on. The door stays locked.

5.6

The appliance stops automatically.

The acoustic signal will operate.

The display will show “ ”.

The indicator of the “Start/Pause”

touchpad goes off.

The door lock indicator “ ”

goes off.

Remove the laundry from the

appliance. Make sure that the

drum is empty.

Keep the door and the detergent

drawer ajar, to prevent the

mildew and odours.

Turn off the water tap.

5.7 At The End Of The Program

The indicator “Start/Pause”

flashes to remind you to drain

the water.

When the program is completed

and the door lock indicator “ ”

goes off, you can open the door.

1.

To drain the water:

NOTE

Alternatively, before pressing the

“Start/Pause” touchpad, you can

press the “Spin ” touchpad to

change the spin speed. You can

select “No Spin”, if you want the

machine to only drain the water,

then press the Start/Pause

touchpad. The appliance will drain

the water and spin.

Press the “Start/Pause ”

touchpad. The appliance

drains the water and spins with

the maximum spin speed for

selected program.

2.

Press the “On/Off” button to

deactivate the appliance.

3.

After approximately 18 hours

if you do not press

Start/Pause touchpad, the

appliance will drain and spin

automatically (except for

Woollens program) .

At the end of the program

the time remaining can

suddenly decrease from 7

minutes or less to 0 due to

the overestimated total

program time during the load

sensing phase.

In some cases (with perfectly

balanced load) the program

time can be shorter than the

time estimated after the load

sensing phase is completed.

This is a normal behavior of

the machine and not a cause

for concern as it does not

compromise its performance.

18

www.zanussi.com

AUTO Stand-By Option

5.8

WASHING HINTS6.

Follow the wash code symbols on

each garment label and the

manufacturer’s washing

instructions. Sort the laundry as

follows: whites, coloureds,

synthetics, delicates, woollens.

6.1 Sorting The Laundry

6.2 Temperatures

90°C

60°C

50°C

40°C

30°C

Cold

For normally soiled,

colourfast garments (e.g.

shirts, night dresses,

pyjamas....) in linen, cotton

or synthetic fibres and for

lightly soiled white cotton

(e.g.underwear).

For delicate items (e.g. net

curtains), mixed laundry

including synthetic fibres

and woollens bearing the

label pure new wool,

machine washable,

non-shrink.

For heavily or normally

soiled white cottons and

linen (e.g. teacloths, towels,

tablecloths, sheets...).

Never wash whites and coloureds

together. Whites may lose their

“whiteness” in the wash.

New coloured items may run in the

first wash; they should therefore be

washed separately the first time.

Button up pillowcases, close zip

fasteners, hooks and poppers. Tie

any belts or long tapes.

Remove persistent stains before

washing.

Rub particularly soiled areas with a

special detergent or detergent paste.

Treat curtains with special care.

Remove hooks or tie them up in a

bag or a net.

Make sure that no metal objects

are left in the laundry (e.g. hair

clips, safety pins, pins).

6.3 Before Loading The

Laundry

The AUTO Stand-by option

automatically deactivates the

appliance to decrease the energy

consumption when:

You do not press any touch-

pads for 5 minutes before you

press “Start/Pause”.

Press the “On/Off” button

to activate the appliance

again.

After 5 minutes from the end of

the washing program.

Press the “On/Off” button

to activate the appliance

again.

ENGLISH 19

Recommended loads are indicated

in the program charts. General

rules:

Washing a maximum load makes

the most efficient use of water and

energy. For heavily soiled laundry,

reduce the load size.

Cotton, linen:

drum full but not

too tightly packed;

Synthetics,

Delicate:

drum no more

than half full;

woollens:

drum no more

than one third full.

6.4 Maximum Loads

Blood: treat fresh stains with cold

water. For dried stains, soak

overnight in water with a special

detergent then rub in the soap and

water.

Oil based paint: moisten with

benzine stain remover, lay the

garment on a soft cloth and dab

the stain; treat several times.

Dried grease stains: moisten with

turpentine, lay the garment on a

soft surface and dab the stain with

the fingertips and a cotton cloth.

Stubborn stains may not be

removed by just water and

detergent. It is therefore advisable

to treat them prior to washing.

6.5 Removing Stains

Rust: oxalic acid dissolved in hot

water or a rust removing product

used in cold water. Be careful with

rust stains which are not recent

since the cellulose structure will

already have been damaged and

the fabric tends to hole.

Mould stains: treat with bleach,

rinse well (whites and fast

coloureds only).

Grass: soap lightly and treat with

bleach (whites and fast coloureds

only).

Ball point pen and glue: moisten

with acetone (*), lay the garment on

a soft cloth and dab the stain.

Lipstick: moisten with acetone (*)

as above, then treat stains with

methylated spirits. Remove any

residual marks from white fabrics

with bleach.

Red wine: soak in water and

detergent, rinse and treat with

acetic or citric acid, then rinse.

Treat any residual marks with

bleach.

Ink: depending on the type of ink,

moisten the fabric first with

acetone (*), then with acetic acid;

treat any residual marks on white

fabrics with bleach and then rinse

thoroughly.

Tar stains: first treat with stain

remover, methylated spirits or

benzine, then rub with detergent

paste.

Good washing results also depend

on the choice of detergent and use

of the correct quantities to avoid

waste and protect the

environment.

Although biodegradable, detergents

contain substances which, in large

quantities, can upset the delicate

balance of nature.

(*) do not use acetone on artificial

silk.

6.6 Detergents and Additives

20

www.zanussi.com

The detergent and any additives

must be placed in the appropriate

compartments of the dispenser

drawer before starting the wash

program.

The choice of detergent will depend

on the type of fabric (delicates,

woollens, cottons, etc.), the colour,

washing temperature and degree of

soiling.

Only low suds Front load washer

detergents should be used in

this appliance:

powder detergents for all types

of fabric,

powder detergents for delicate

fabrics (60 °C max) and woollens,

liquid detergents, preferably for

low temperature wash program

(60 °C max) for all types of fabric,

or special for woollens only.

Pour liquid detergent into the

dispenser drawer compartment

marked “ ” just before starting

the program.

the washload to turn grey,

greasy clothes.

sudsing,

inadequate rinsing.

reduced washing effect,

Any fabric softener or starching

additives must be poured into the

compartment marked “ ” before

starting the wash program.

Follow the product manufacturer’s

recommendations on quantities to

use and do not exceed the MAX

mark in the detergent dispenser

drawer.

The type and quantity of detergent

will depend on the type of fabric,

load size, degree of soiling and

hardness of the water used.

Do not spray stain

pre-treatment products (e.g.

Preen) on or near the machine,

as it can attack plastic

materials reducing its life.

Information on hardness of the

water in your area can be obtained

from the relevant water supply

company, or from your local

authority.

Follow the product manufacturers’

instructions on quantities to use.

Water hardness is classified in

so-called “degrees” of hardness.

6.7 Quantity of Detergent To Be

Used

Not enough washing powder

causes:

Too much washing powder

causes:

you are washing a small load,

large amounts of foam form

during washing.

the laundry is lightly soiled,

Use less detergent if:

NOTE:

Use only front load type

detergents and reduce the

amount of detergent if

oversudsing occurs.

ページが読み込まれています...

Electrolux ZWH8104 ユーザーマニュアル

このマニュアルも適しています

Electrolux ZWH8104 ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント