Yamaha M7 クイックスタートガイド

タイプ
クイックスタートガイド

このマニュアルも適しています

EnglishFrançaisEspañol
ES
FR
EN
MUSIC SYNTHESIZER
SYNTHÉTISEUR MUSICAL
SINTETIZADOR MUSICAL
Quick Guide
Guide rapide
Guía rápida
S1 MONTAGE M Quick Guide
FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
 Thisproduct,wheninstalledasindicatedintheinstructionscontainedinthismanual,meetsFCCrequirements.Modications
not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
2 . I MP OR TA NT: When connecting this product to accessories and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for
Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of
this product in a residential environment will not result in harmful interference with other electronic devices. This equipment
generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may
cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee
that interference will not occur in all installations. If this product is found to be the source of interference, which can be
determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:
-Relocateeitherthisproductorthedevicethatisbeingaectedbytheinterference.
-Utilizepoweroutletsthatareondierentbranch(circuitbreakerorfuse)circuitsorinstallAClinelter/s.
- In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change
the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute
this type of product. If you cannot locate the appropriate retailer, please contact Yamaha Corporation of America, 6600
OrangethorpeAve.,BuenaPark,CA90620,USA.
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.
(529-M04FCCclassBYCA01)
COMPLIANCE INFORMATION STATEMENT
(Supplierʼs declaration of conformity procedure)
Responsible Party: Yamaha Corporation of America
Address: 6600OrangethorpeAve.BuenaParkCalif.90620
Telephone: 714-522-9011
Type of Equipment: Music Synthesizer
Model Name: MONTAGE M6, MONTAGE M7, MONTAGE M8x
This device complies with Part 15 of the FCC Rules.
Operation is subject to two following conditions:
1)thisdevicemaynotcauseharmfulinterference,and
2)thisdevicemustacceptanyinterferencereceivedincludinginterferencethatmaycauseundesiredoperation.
(529-M02FCCsdocYCA01)
IMPORTANT
Please record the serial number of this unit in the space below.
Model
Serial No.
Theserialnumberislocatedonthebottomorrearoftheunit.RetainthisQuickGuideinasafeplaceforfuturereference.
*ThisappliesonlytoproductsdistributedbyYAMAHACORPORATIONOFAMERICA. (84-M01Ser.No)
S2
MONTAGE M Quick Guide
Information for users on collection and disposal of old equipment:
Thissymbolontheproducts,packaging,and/oraccompanyingdocumentsmeansthatusedelectricaland
electronic products should not be mixed with general household waste.
Forpropertreatment,recoveryandrecyclingofoldproducts,pleasetakethemtoapplicablecollectionpoints,in
accordance with your national legislation.
By disposing of these products correctly, you will help to save valuable resources and prevent any potential
negativeeectsonhumanhealthandtheenvironmentwhichcouldotherwisearisefrominappropriatewaste
handling.
For more information about collection and recycling of old products, please contact your local municipality, your
waste disposal service or the point of sale where you purchased the items.
For business users in the European Union:
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further
information.
Information on Disposal in other Countries outside the European Union:
This symbol is only valid in the European Union. If you wish to discard these items, please contact your local
authoritiesordealerandaskforthecorrectmethodofdisposal.
(58-M02WEEEen01)
2MONTAGE M Quick Guide
Power supply
• Donotplacethepowercordnearheatsourcessuchas
heatersorradiators.Also,donotexcessivelybendor
otherwisedamagethecord,orplaceheavyobjectsonit.
• Donottouchtheproductorthepowerplugduringan
electricalstorm.
• Useonlythecorrectvoltagespeciedfortheproduct.
Therequiredvoltageisprintedonthenameplateofthe
product.
• Useonlythesuppliedpowercord/plug.Donotusethe
powercord/plugforotherdevices.
• Checkthepowerplugperiodicallyandremoveanydirtor
dustwhichmayhaveaccumulatedonit.
• InsertthepowerplugrmlyallthewayintotheACoutlet.
Usingtheproductwhenitisnotpluggedinsuciently
cancausedusttoaccumulateontheplug,possibly
resultinginreorskinburns.
• Whensettinguptheproduct,makesurethattheAC
outletyouareusingiseasilyaccessible.Ifsometroubleor
malfunctionoccurs,immediatelyturnothepowerswitch
anddisconnecttheplugfromtheoutlet.Evenwhenthe
powerswitchisturnedo,aslongasthepowercordisnot
unpluggedfromthewallACoutlet,theproductwillnot
bedisconnectedfromthepowersource.
• Donotconnecttheproducttoanelectricaloutletusing
amulti-plugoutletextender.Doingsocanresultinlower
soundquality,orpossiblycauseoverheatingintheoutlet.
• Whendisconnectingthepowerplug,alwaysholdtheplug
itselfandnotthecord.Pullingbythecordcandamageit
andcauseelectricshocksorare.
• Ifnotusingtheproductforlongperiodsoftime,besure
topullthepowerplugfromtheACoutlet.
• Besuretoconnecttoanappropriateoutletwitha
protectivegroundingconnection.Impropergrounding
canresultinelectricalshock.
Do not disassemble
• Thisproductcontainsnouser-serviceableparts.Donot
attempttodisassembletheinternalpartsormodifythem
inanyway.
Water warning
• Donotexposetheproducttorain,useitnearwateror
indamporwetconditions,orplaceonitanycontainers
(suchasvases,bottlesorglasses)containingliquidswhich
mightspillintoanyopeningsorplaceswherewatermay
drop.Aliquidsuchaswatergettingintotheproductmay
causeare,electricshocks,ormalfunctions.
• Neverinsertorremoveapowerplugwithwethands.
Fire warning
• Donotplaceanyburningitemsoropenamesnearthe
product,sincetheymaycauseare.
If you notice any abnormality
• Ifanyofthefollowingproblemsoccur,immediatelyturn
othepowerswitchanddisconnectthepowerplugfrom
theoutlet.
FinallyhavethedeviceinspectedbyYamahaservice
personnel.
- Thepowercordorplugbecomesfrayedordamaged.
- Unusualsmellsorsmokeareemitted.
- Someobject,orwaterhasbeendroppedintothe
product.
- Thereisasuddenlossofsoundduringuseofthe
product.
- Cracksorothervisibledamageappearontheproduct.
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Pleasekeepthismanualinasafeandhandyplaceforfuturereference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from
electrical shock, short-circuiting, damages, re or other hazards. These precautions include, but are not limited
to, the following:
3
MONTAGE M Quick Guide
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or
damage to the product or other property. These precautions include, but are not limited to, the following:
Location
• Donotplacetheproductinanunstablepositionor
alocationwithexcessivevibration,whereitmight
accidentallyfalloverandcauseinjury.
• Donotgoneartheproductduringanearthquake.Strong
shakingduringanearthquakecouldcausetheproductto
moveortipover,resultingindamagetotheproductorits
parts,andpossiblycausinginjury.
• Whentransportingormovingtheproduct,alwaysusetwo
ormorepeople.Attemptingtolifttheproductbyyourself
mayresultininjuries,suchasbackinjuries,orcausethe
producttobedroppedandbroken,whichcouldleadto
otherinjuries.
• Beforemovingtheproduct,removeallconnectedcables,
topreventdamagetothecablesorinjurytoanyonewho
mighttripoverthem.
Connections
• Beforeconnectingtheproducttootherelectronic
components,turnothepowerforallcomponents.
Beforeturningthepoweronoroforallcomponents,set
allvolumelevelstominimum.
• Besuretosetthevolumesofallcomponentsattheir
minimumlevelsandgraduallyraisethevolumecontrols
whileplayingtheproducttosetthedesiredlisteninglevel.
Handling
• Donotinsertforeignmaterialssuchasmetalorpaperinto
anyopeningsorgapsoftheproduct.Failuretoobserve
thismaycauseare,electricshocks,ormalfunctions.
• Donotrestyourweighton,orplaceheavyobjectsonthe
product,anddonotuseexcessiveforceonthebuttons,
switchesorconnectors.
• Donotusetheproductorheadphonesforalongperiod
oftimeatahighoruncomfortablevolumelevel,sincethis
cancausepermanenthearingloss.Ifyouexperienceany
hearinglossorringingintheears,consultaphysician.
• RemovethepowerplugfromtheACoutletbefore
cleaningtheunit.Failuretoobservethismaycause
electricshocks.
Yamahacannotbeheldresponsiblefordamagecausedbyimproperuseormodicationstotheproduct,ordatathatislost
ordestroyed.
Alwaysturnthepowerowhentheproductisnotinuse.
(D M I -11)
English
4MONTAGE M Quick Guide
NOTICE
Toavoidthepossibilityofmalfunction/damagetothe
product,damagetodata,ordamagetootherproperty,
followthenoticesbelow.
Handling
• DonotusethisproductinthevicinityofaTV,radio,stereo
equipment,mobilephone,orotherelectricdevices.
Otherwise,thisproduct,TV,orradiomaygeneratenoise.
• Whenyouusetheproductalongwithanapponyour
smartdevice,suchasasmartphoneortablet,we
recommendthatyouenable“AirplaneMode”onthe
devicetoavoidnoisecausedbycommunication.
• Donotexposetheproducttoexcessivedustorvibrations,
orextremecoldorheat(suchasindirectsunlight,neara
heater,orinacarduringtheday)topreventthepossibility
ofdisguration,damagetotheinternalcomponentsor
unstableoperation.
• Donotplacevinyl,plasticorrubberobjectsonthe
product,sincethismightdiscolortheproduct.
Maintenance
• Whencleaningtheproduct,useasoftanddry/slightly
dampcloth.Donotusepaintthinners,solvents,alcohol,
cleaninguids,orchemical-impregnatedwipingcloths.
Saving data
• EditedPerformance
EditedPerformanceislostwhenyouturnothepower
totheproductwithoutstoringit.Thisalsooccurswhen
thepoweristurnedobytheAutoPowerOfunction
(page31).
• Othersettings
Othersettingsareretainedwhenthepoweristurnedo.
• Tosaveimportantsettings
KeepinmindthatPerformancesandothersettingssaved
totheproductmayoccasionallybelostduetosome
failure,anoperationmistake,etc.Forthisreason,you
shouldsaveyourimportantsettingsontoaUSBashdrive
(refertotheOperationManual).BeforeusingaUSBash
drive,makesuretoseepage32.
Information
About copyrights
Thecopyrightofthe“content”*1installedinthisproduct
belongstoYamahaCorporationoritscopyrightholder.
Exceptaspermittedbycopyrightlawsandotherrelevant
laws,suchascopyingforpersonaluse,itisprohibited
to“reproduceordivert”*2withoutthepermissionofthe
copyrightholder.Whenusingthecontent,consultwitha
copyrightexpert.
Ifyoucreatemusicorperformwiththecontentsthroughthe
originaluseoftheproduct,andthenrecordanddistribute
them,thepermissionofYamahaCorporationisnotrequired
regardlessofwhetherthedistributionmethodispaidorfree
ofcharge.
*1:Theword“content”includesacomputerprogram,audiodata,
AccompanimentStyledata,MIDIdata,waveformdata,voice
recordingdata,musicscore,andscoredata,etc.
*2:Thephrase“reproduceordivert”includestakingoutthecontent
itselfinthisproduct,orrecordinganddistributingitwithout
changesinasimilarmanner.
About this manual
• TheillustrationsandLCDscreensasshowninthismanual
areforinstructionalpurposesonly.
• Unlessindicatedotherwise,theillustrationsandscreensas
showninthismanualarebasedontheMONTAGEM6(in
English).
• Thecompanynamesandproductnamesinthismanual
arethetrademarksorregisteredtrademarksoftheir
respectivecompanies.
About disposal
Whendisposingofthisproduct,pleasecontactthe
appropriatelocalauthorities.
5
MONTAGE M Quick Guide
MEMO
6MONTAGE M Quick Guide
Welcome
ThankyouforpurchasingthisYamahaMusicSynthesizer!
Thisagshipmodelsynthesizercomeswithmultiplesoundenginesthatmaketheinstrumentpowerfulandversatileforall
musicgenres.Werecommendthatyoureadthismanualcarefullysothatyoucanfullytakeadvantageoftheadvancedand
convenientfunctionsofthisinstrument.Wealsorecommendthatyoukeepthismanualinasafeandhandyplaceforfuture
reference.
About the manuals
Thesetofdocumentslistedbelowareincludedwiththisinstrument.
Printed manual included with this product
Quick Guide (this book)
Providesexplanationsforthebasicfunctionsoftheinstrument.
Website-based manuals
ThemanualsprovidedonthewebsitecanbedownloadedfromtheYamahaDownloads.ConnecttotheInternetandenterthe
modelname"MONTAGEM"intheModelNameorKeywordsearchboxandclickSearch.
Yamaha Downloads
https://download.yamaha.com/
Operation Manual (HTML)
Providesinstructionsonoperatingtheinstrument,aswellasdetailedinformationontheinternalstructureandconnection
ofotherinstrumentsanddevices.
https://manual.yamaha.com/mi/synth/montage_m/index_q.html
Data List (.xlsx and .pdf)
ThislecontainsvariousimportantlistssuchasthePerformancelist,Eecttypelist,Waveformlist,Arpeggiotypelist,and
MIDIimplementationchart.
Included accessories
• Powercord(×1)
• Quickguide(thisbook)
• Cubase AI Download Information
• Expanded Softsynth Plugin for MONTAGE M download information
7
MONTAGE M Quick Guide
About rmware updates
Toimplementnewfunctionsandimproveoperability,thisinstrumentmaybeshippedwithanupdatedversionofthermware
installed.
Themanualfortheupdatedversionofthermwarecanbedownloadedfromthewebsitebelow.
Yamaha Downloads:https://download.yamaha.com/
Thermwareversionofyourkeyboardcanbecheckedvia[UTILITY]gSettingsgSystem.
Notation in this document
Model name
Inthisdocument,MONTAGEM6,MONTAGEM7,andMONTAGEM8xarecollectivelycalledthe“MONTAGEM.”
NOTE
"NOTE"indicatessupplementarydescriptions.
8MONTAGE M Quick Guide
Contents
PRECAUTIONS ..................................................................2
NOTICE ........................................................................4
Information ....................................................................4
Welcome .......................................................................6
About the manuals .............................................................6
Printedmanualincludedwiththisproduct...................................................... 6
Website-basedmanuals......................................................................... 6
Included accessories ............................................................6
About rmware updates ........................................................7
Notation in this document ......................................................7
Features .......................................................................9
WhatistheMotionControlSynthesisEngine? ................................................... 9
Basic Performance structure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
How Live Set works ............................................................11
LiveSetbank.................................................................................. 11
Panel controls and functions ...................................................12
Toppanel......................................................................................12
Rearpanel.....................................................................................26
Setting up .....................................................................30
Powersupply..................................................................................30
Connectingspeakersorheadphones...........................................................30
TurningtheinstrumentON
TurningtheinstrumentOFF....................................................................31
AutoPowerOfunction.......................................................................31
Adjustingthemastervolume..................................................................32
PanelLockfeature.............................................................................32
UsingUSBashdrives..........................................................................32
Preparation for live performance ...............................................33
Status check and basic operation ...............................................34
Checkingthestatus............................................................................34
Openingsettingscreens.......................................................................38
Movingthecursorandchangingparametervalues.............................................39
Iconsshownforspecicoperations ............................................................40
Enteringcharactersandnumbers ..............................................................41
Playing the keyboard ..........................................................44
SelectingaPerformancefromtheLiveSetscreen...............................................44
Troubleshooting ...............................................................45
Restoringthefactorydefaultsettings(InitializeAllData)........................................45
Specications .................................................................46
Index .........................................................................47
9
MONTAGE M Quick Guide
Features
TheMONTAGEMsynthesizersfeaturethebuilt-inMotion Control Synthesis Engine,lettingyoucreateenormouslycomplex,
multi-texturedsoundsbycombiningAWM2,FM-X,andAN-Xsynthesisenginesseamlesslyandfurthermodifyingthesound
usingMotioncontrol.Therefore,youcanusetheMONTAGEM,notjustforrecreatingconventionalsounds,butalsoforcreating
completelynewsounds.
What is the Motion Control Synthesis Engine?
Thisisapowerfullycomprehensivesynthesissystemthatusesahybrid,multi-tone-generatorsoundengine,andsophisticated
motioncontrolswithmultiplecontrolsourcesforcreatingcomplexandcontinuouslyshiftingsonictextures.
Hybrid sound engine
AWM2
Generatessoundsusingsoundles(orwave
les)sampledfromrealinstruments
FM-X
Generatessoundsbyusingthefrequenciesof
waveformstomodifyotherwaveforms
AN-X
Generatessoundsbymodifyingsimple
waveformsandapplying‘modeling’lters
Motion controls
Super Knob
Controlsmultipleparametersforcreating
multi-dimensionalsoundchanges
Motion Sequencer
Playsbackthemovementofthecontrollers
youhavesetbeforehandandchangesthe
soundsequentially
Envelope Follower
Generatessoundchangesthatsynchronizeto
thetempooftheinputaudio
10 MONTAGE M Quick Guide
Basic Performance structure
OntheMONTAGEM,thegroupofsettingsrelatedtoaspecicsoundiscalleda“Performance.”SelectthedesiredPerformance
andplaythekeyboard.
APerformancecanconsistofupto16Parts,withasoundassignedtoeachPart.

APerformancethatcontainsmultiplePartsiscalledaMulti-PartPerformance,whileaPerformancethatcontainsonlyonePartis
calledaSingle-PartPerformance.Single-PartPerformancescanbeusedinthesamewayasVoicesonAWM2synthesizers.
TherearefourtypesofParts.
Normal Parts (AWM2)
PartsplayedbytheAWM2soundengine.Aninstrumentsoundsuchaspiano,organ,guitar,andsynthesizercanbeassigned
toaPart.
Normal Parts (FM-X)
PartsplayedbytheFM-Xsoundengine.
Normal Parts (AN-X)
PartsplayedbytheAN-Xsoundengine.
Drum Parts (AWM2)
PartsplayedbytheAWM2soundengine.ApercussioninstrumentsoundcanbeassignedtothePart.TheDrumPartsare
usedforplayingrhythms.
NOTE
• Ifyouwishtocreatesoundsbyusingdefaultinitialvalues,selectanInitPerformance.
• Ifyouwishtousethisinstrumentasa16-partmultitimbraltonegenerator,usetheMulti/GMPerformances.ThesearePerformancesusingall
16parts,withthedrumsbeingassignedtoPart10.
PerformancesallowyoutoselectasoundforeachPartandcombinemultiplePartsinsophisticatedsplitandlayersettingsfor
playingonthekeyboard.Moreover,youcancreatecomplexsoundsbyeditingthePerformancesandPartsfromtheEditscreen
andenablingtheMotionControlsettings.
ThecreatedPerformancecanbesavedtointernalmemory,ortoUSBashdrivesconnectedtotheinstrument.Youcanalsouse
Soundmondo,asoundmanagementandsharingservice,tosavebackupsforyourselforshareyourPerformanceswithothers.
Soundmondo:https://www.yamaha.com/2/soundmondo
BycombiningtheExpanded Softsynth Plugin for MONTAGE M(thesoftwareversionoftheMONTAGEM)installedonthe
computerandthehardwareversionoftheMONTAGEM,youcancreateandmanagemanymorePerformances.Thesounds
youhaveusedinyourDAWformusicproductionandthesoundsyouhaveusedforliveperformancearesharedbetweenthe
softwareandhardwaresynthesizers.
Performance
Part1 Part2 Part3 Part4 Part5 Part6 Part16
11
MONTAGE M Quick Guide
How Live Set works
MONTAGEMseriessynthesizersfeatureapowerfulLiveSetfunctionforsavingandmanagingthePerformancesyou’vecreated.
TheLiveSetfunctionletsyouregisterthedesiredMIDIandaudiolestoplayalongwiththePerformancesyouwishtouseon
stage.
OntheLiveSetscreen,thereare16slotsperpageforsavingupto16setsofsettings.Forexample,youcanregisterthesame
PerformancewithdierentvolumesettingstovariousslotssothatyoucanchangethevolumeofthePerformanceasthesong
progresses.Thatwayyoucansimplytaptheslottoswitchtothenextvolumesettingasyouplaylive.
NOTE
AlinktotheselectedPerformanceissavedtoeachslot.WhenaPerformanceiseditedandstored,allslotsthathavethelinktothe
correspondingPerformancewillbeupdated.
Live Set bank
AbankisasetofLiveSetpagesusedformanagingPerformances.Eachbankhas16pagesofLiveSets.
Therearethreetypesofbanks:Preset,User,andLibrary.
Preset bank
ThebankforregisteredpresetPerformances.
AnyPerformancesinthePresetbankyouhaveeditedcannotbesavedbacktothePresetbank;theymustbesavedtoaUser
bank
NOTE
Refertothe“Data list”forthelistofPresetPerformances.
User bank
ThebankforregisteredPerformancesyou’veeditedyourself.NothingiscontainedinthisbankwhentheMONTAGEMis
shippedfromthefactory.
Thereareeightbanks(or128pages)available,allowingyoutoregisterupto2,048Performances.
YoucanarrangethePerformancesinyourowncustomorderforexample,accordingtoasetlistinliveperformance
situations.
Library bank
ThebankforregisteredPerformancesfromtheLibraryles.NothingiscontainedinthisbankwhentheMONTAGEMis
shippedfromthefactory.
YoucanregisteroneLibraryleperbank.
LibrarylescanbedownloadedfromtheYamahawebsite.
WhenyourststartuptheMONTAGEM,theLiveSetscreenforthePresetbankwillbeshownontheMaindisplay.
Thestart-upscreencanbesettoaLiveSetorPerformancescreenasdesired([UTILITY]gSystem).
1Bank
Performance1 Performance2
Performance16
Page
Slot
Performance
Performancestoragearea
12 MONTAGE M Quick Guide
Panel controls and functions
Thissectionprovidesanoverviewofthepanelcontrolsandfunctions.
Top panel
Selecting a sound
  




Controllingparametersinrealtimeas
youplaythekeyboard,andadjusting
detailedparametervalues
Viewingthescreen,switchingsettings,
selectingitems,andenteringvalues
SelectingfunctionssuchasEditand
Utility
Selectingasound
Controllingthe
built-insequencer
Playingthekeyboard
13
MONTAGE M Quick Guide
1-1 [PERFORMANCE] button (INFO)
ThiscallsupthePerformancescreen.YoucanpressthisbuttontoswitchtoadierentPerformanceview.
Pressingthisbuttonwhileholdingdownthe[SHIFT]buttoncallsupthescreenforcheckingrelevantinformationfor
thePerformance(INFOscreen).
1-2 [LIVE SET] button (REGISTER)
ThiscallsuptheLiveSetscreen.YoucanpressthesamebuttontoselectadierentPerformancebank.
Pressthisbuttonandthentaptheslotonthetouchscreen,orusetheSlotnumberandCategorynameselection
buttonstoselectaslotfromtheLiveSetpagecurrentlyshownonthescreen.
Pressingthisbuttonwhileholdingthe[SHIFT]buttonopensthescreenforregisteringthecurrentPerformancetothe
LiveSetpage.DoingthisbeforehandallowsyoutocallupPerformancesquicklyandconvenientlyasyouplaylive.
1-3 BANK buttons
Usethesebuttonstoselectabank.
1-4 PAGE buttons
UsethesebuttonsforselectingaLiveSetpage.
OntheCategorySearchscreen,youcanusethesebuttonstoscrollthroughthelistofPerformances.
1-5 [CATEGORY] button (PART CATEGORY)
UsethisbuttontocalluptheCategorySearchfunction.Everytimeyoupressthebutton,thenextPerformancebankis
selected.
WhilethePerformancescreenisactive,pressingthisbuttonopensthePerformanceCategorySearchscreenfor
selectingaPerformance.
WhenthecursorisonaPart,pressingthisbuttonwhileholdingdownthe[SHIFT]buttonopensthePartCategory
Searchscreen.
1-6 Slot number and Category name selection buttons
Whenthe[LIVESET]buttonisselected,youcanusethesebuttonstoselectoneoftheLiveSetslots,1to16.Whenthe
[CATEGORY]buttonisselected,youcanusethesebuttonstoselectacategory.
Categories and descriptions
Categories Descriptions Categories Descriptions
Piano Piano Pad/Choir Synthpad
Keyboard Keyboardinstruments(suchas
harpsichordandClav)
Syn Comp Synthcomp(synthsoundssuitablefor
comping”)
Organ Organ Chromatic Perc Chromaticpercussion(suchasmarimba
andglockenspiel)
Guitar Guitar Drum/Perc Drums,Percussion
Bass Bass Sound FX Soundeects
Strings Strings(instrumentssuchasviolins,or
stringensembles)
Musical FX Musicaleects(pitchedsoundeects)
Brass Brass(suchastrumpets) Ethnic Ethnic
Woodwind Woodwindinstruments(suchasclarinets,
ues,andsaxophones)
No Assign Noassign(notcategorized)
Syn Lead Synthlead(synthsoundsuitablefor
playingmelodiesandsoloing)
Init Initialized(nosettings)
YoucanalsousethesebuttonstoselectasettingontheDAW RemoteorQuick Setupscreen.
1-7 [AUDITION] button
WhileoneofthePerformance,LiveSet,orCategorySearchscreensareshown,pressingthisbuttonstartsorstopsthe
playbackoftheauditionphrasethatusesthecurrentlyselectedPerformance.
14 MONTAGE M Quick Guide
Selecting functions such as Edit and Utility
2-1 [UTILITY] button (SHOW VALUE)
ThiscallsuptheUTILITYscreenwhereyoucanchangetheoverallsettingsfortheMONTAGEM.
Pressingthisbuttonwhileholdingdownthe[SHIFT]buttonshowsthevaluesontheMaindisplayortheSubdisplayif
thereareanyvaluesnotshowngraphically.
2-2 [NAVIGATION] button (FX OVERVIEW)
AccordingtothePartyouareediting,thiscallsupthemapofthecorrespondingparameters.Whenyouselectone
itemfromthemap,theparametersettingscreenforthatitemwillbeshownontheMaindisplay.
Pressingthisbuttonwhileholdingdownthe[SHIFT]buttoncallsupthescreenforcheckingtheeectoverview
(FXOVERVIEWscreen).
2-3 [EDIT/ ] button (JOB)
ThiscallsupthePerformanceEdit,LiveSetEditorPatternEditscreen.
WhileeditingthePerformanceparameters,pressingthisbuttonallowsyoutousetheComparefunction.
WiththeComparefunction,youcancheckthesoundbeforeandaftereditingtoseehowthesoundchanges.
WhiletheEditscreenisshown,pressthe[EDIT/ ]button.The[EDIT/ ]buttonashes,andthesettingstemporarily
reverttothestatebeforetheedit.Pressthe[EDIT/ ]buttonagaintoenablethenewlyeditedsettingsagain.
Pressingthisbuttonwhileholdingdownthe[SHIFT]buttoncallsupthescreenforJobsettings(JOBscreen).
2-4 [SHIFT] button
Holddownthisbuttonalongwithanotherbuttonenablesyoutocallupthealternatefunctionprintedinredatthe
bottomofeachbutton.
Forthelistoffunctions,refertotheOperationManual.
2-5 [DAW REMOTE] button
ThiscallsuptheDAWREMOTEscreenforthePerformance.YoucanselectthedesiredDAW Remotemodebypressing
theCategorynamenumberselectionbuttonslocatedontheright.
2-6 [QUICK SETUP] button (FX BYPASS)
ThiscallsuptheUtilityQUICKSETUPscreen.YoucanselectaQuick SetupmodebypressingtheCategorynamenumber
selectionbuttonslocatedontheright.
Pressingthisbuttonwhileholdingdownthe[SHIFT]buttoncallsupthescreenformakingeectbypasssettings
(FXBYPASSscreen).






 


15
MONTAGE M Quick Guide
2-7 [STORE] button (FILE)
ThiscallsuptheStorescreen.OntheStorescreen,youcanselecttosavethePerformanceunderanewnameorto
overwritetheexistingperformance.
Pressingthisbuttonwhileholdingdownthe[SHIFT]buttoncallsupthescreenforFilesettings(FILEscreen).
2-8 [SPLIT] button (NOTE RANGE)
ThiscallsuptheSplit JobscreenforthePerformance.
Pressingthisbuttonwhileholdingdownthe[SHIFT]buttoncallsupthescreenforsettingnoteranges(NOTERANGE
screen).
2-9 [SONG/PATTERN] button (RHYTHM PATTERN)
ThiscallsupthePlay/RecscreenforthePerformance.
Pressingthisbuttonwhileholdingdownthe[SHIFT]buttoncallsupthescreenforsettingRhythmPatterns(RHYTHM
PATTERNscreen).
2-10 [TEMPO/TAP] button (PANEL LOCK)
ThiscallsuptheUtility Tempo Settingsscreen.
Pressingthisbuttonwhileholdingdownthe[SHIFT]buttonlocksthepanelcontrols.Repeattheoperationtounlock
thepanelcontrols.
Controlling the built-in sequencer
3 Sequencer transport buttons
UsethesebuttonsforcontrollingplaybackandrecordingofthesequencerdataforPattern,SongandAudio.
[ ] (Back) button
Usethisbuttonformovingbackonemeasureatatime.
[ ] (Forward) button
Usethisbuttonformovingforwardonemeasureatatime.
[J] (Stop) button
Usethisbuttonforstoppingplaybackorrecording.Ifyoupressthisbuttonagainwhileplaybackiscurrentlystopped,
thestartingpointforplaybackreturnstothebeginningofthesequencerdata.
YoucanalsousethisbuttontostopArpeggioplaybackthatcontinuesplayingafterkeysarereleased(incaseswhere
theArpeggioHoldswitchison).
[I] (Record) button
ThiscallsuptheRecordingscreen.WhiletheRecordingscreenisshown,pressthisbuttontocalluptheRecording
setupscreen(thebuttonstartsashing).Whenyoupressthe[R](Play)button,recordingstarts,andthebuttonstops
ashingandlightscontinuously.
[R] (Play) button
Usethisbuttonforstartingsongplaybackorrecording.Whenplaybackorrecordingstarts,thebuttonashesatthe
tempoofthesong.Thebuttonlightsupcontinuouslyforaudio.
16 MONTAGE M Quick Guide
Viewing the screen, switching settings, selecting items, and entering values
4-1 Main display (touchscreen)
Thisdisplayshowsvariousinformation.Bytouchingthescreen,youcanchangethesettings.
YoucanalsousetheSlotnumberandCategorynameselectionbutton,cursorkey,datadial,anddisplayknobsto
movethecursorandchangethevalue.Fordetails,see“Statuscheckandbasicoperation”(page34).
4-2 Display knobs
Rev SendVar SendDry LevelPanVolume
UsetheseknobstocontroltheselectedrowofparametersshownintheMaindisplay.Theknobswiththeparameter
namesshownatthebottomoftheMaindisplayandwiththeirindicatorlampsONcanbeusedforchangingthe
parametersettings.


 
 
 
17
MONTAGE M Quick Guide
4-3 Data dial
Usethisdialtochangethevalueshownatthecursorposition.
Movingthedialfasterletsyouchangetheparametervalueinlargerincrements.
4-4 Cursor buttons
Formovingthecursorpositionup,down,left,andright.
4-5 [DEC/NO] button
Usethisbuttontodecreasethevalueinincrements.
Youcanalsousethisbuttontoselect“NO”forthemessageshownontheStoreorJobscreen.
Pressingthisbuttonwhileholdingdownthe[SHIFT]buttonletsyoujumpthroughthevaluesinunitsof10.
4-6 [INC/YES] button
Usethisbuttontoincreasethevalueinincrements.
Youcanalsousethisbuttontoselect“YES”forthemessageshownontheStoreorJobscreen.
Pressingthisbuttonwhileholdingdownthe[SHIFT]buttonletsyoujumpthroughthevaluesinunitsof10.
4-7 [EXIT] button
Thefunctionsshownonthetouchscreenarearrangedinhierarchicalorder.Usethisbuttontoreturnupwardonthe
hierarchicallevel.
IfaPerformancescreenotherthantheHomescreenisshown,youcanusethe[EXIT]buttontoinstantlyreturntothe
Homescreen.
4-8 [ENTER] button
Usethisbuttontocalluptheitemshown/selectedonthescreen.Youcanalsousethisbuttontoselect“YES”for
promptsormessagesshownontheStoreorJobscreen.
18 MONTAGE M Quick Guide
Controlling parameters in real time as you play the keyboard, and adjusting detailed
parameter values
5-1 Sub display
5-2 Tab selection buttons
5-3 Tab PAGE buttons
TheparameterscontrolledwithKnobs1–8areshownontheseparateSubdisplay.UsetheTabselectionbuttonsand
TabPAGEbuttonstoswitchamongtheavailablescreens.
DierentparametersareavailabledependingontheparticulartonegenerationtypeforthePartbeingedited.
5-4 [PAGE JUMP] button
Thiscallsup(ontheMaindisplay)theadvancedsettingscreenfortheparametercurrentlybeingeditedontheSub
display.
Pressingthisbuttonwhileholdingdownthe[SHIFT]buttonenablestheparameterbeingeditedontheMaindisplayto
beshownontheSubdisplayaswell.
5-5 [QUICK EDIT] button
SelectthetypeofparameterstocontrolwithKnobs18.Youcanpressthesamebuttonasmanytimesasnecessaryto
switchtoadierentsetting.
Indicator Description
SELECTEDPART ControlstheparametersforthePartbeingedited
MULTI ControlstheparametersformultiplePartsbeingedited
GROOVE Controlsthegroove-relatedparameters
Whenthe[ASSIGN]buttonisturnedon,the[QUICKEDIT]buttonwillbeturnedo.


   

 
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Yamaha M7 クイックスタートガイド

タイプ
クイックスタートガイド
このマニュアルも適しています