10 11DIGITAL SNAKE S16
DIGITAL SNAKE S16
3:
SELECT/ADJUST
1
48 V
GAIN
SELECT/ADJUST
-3 LED
PHONES
MONITORING LEVEL
CONFIG
CONFIG
SELECT/ADJUST
SN MASTER S16 2
4
44.1kHz 48 kHz
SPLITTER 16
ADAT OUT
SPLITTER ADAT OUT
AES50 17-32
OUTPUT 1-8 AES50 1-8
LED 9-16 17-24 OUT +8 OUT +16
CONFIG
Processing
A/D-D/A conversion
(Cirrus Logic A/D CS5368, D/A CS4385)
24-bit @ 44.1 / 48 kHz,
114 dB dynamic range
Networked I/O latency
(stagebox in > console processing* > stagebox out)
1.1 ms
Connectors
XLR inputs, programmable mic preamps, designed by MIDAS 16
XLR outputs 8
Phones outputs, ¼ " TRS 1 (mono)
AES50 ports, SuperMAC, NEUTRIK etherCON 2
P-16 connector, Ultranet (no power supplied) 1
MIDI inputs / outputs 1 /1
ADAT Toslink outputs (2x 8 Ch) 2
USB type B, rear panel, for system updates 1
Mic Input Characteristics
Design MIDAS
THD + noise, 20 dB gain, 0 dBu out < 0.006 % A-weighted
Input impedance XLR, unbal. / bal. 5 kΩ / 10 kΩ
Non clip maximum input level, XLR +23 dBu
Phantom power, switchable per input 48 V
Equivalent input noise level, XLR (input shorted) -128 dBu
CMRR, XLR, @ 20 dB gain (typical) > 70 dB
CMRR, XLR, @ 40 dB gain > 80 dB
Input/Output Characteristics
Frequency range, @ 48 kHz sample rate, 0 dB to -1 dB 10 Hz - 22 kHz
Dynamic range, analog in to analog out (typical) 106 dB
A/D dynamic range, preamp and converter (typical) 109 dB
D/A dynamic range, converter and output 108 dB
Cross talk rejection @ 1 kHz, adjacent channels 100 dB
Output level, XLR, nom./max. +4 dBu / +21 dBu
Output impedance, XLR, unbal. / bal. 75 Ω / 75 Ω
Phones output impedance / level 40 Ω / +25 dBm (mono)
Residual noise level, XLR and TRS -87 dBu A-weighted
Indicators
Display 4-digit, 7-segment, LED
Front status LEDs
AES50-A, red/green
AES50-B, red/green
HA Locked, red
SN Master, green
Splitter, orange
Out +16, orange
Out +8, orange
Meter
Sig, -30 dB, -18 dB,
-12 dB, -9 dB, -6 dB,
-3 dB, Clip
Rear panel Splitter mode, orange
Power
Switch-mode autorange power supply 100-240 V (50/60 Hz)
Power consumption 45 W
Physical
Dimensions 482 x 225 x 89 mm (19 x 8.9 x 3.5")
Weight 4.7 kg (10.4 lbs)
*) incl. all channel and bus processing, excl. insert e ects and line delays
NOTE: Please verify that your speci c AES50 connections provide stable operation prior to using the products in a live performance or recording situation. The maximum distance for
AES50 CAT5 connections is 100 m / 330 ft. Please consider using shorter connections where possible for gaining safety margin. Combining 2 or more cables with extension connectors
can reduce the reliability and maximum distance between AES50 products. Unshielded (UTP) cable may work well for many applications, but entails an additional risk for ESD issues.
We guarantee, that all our products will perform as speci ed with 50 m of KLARK TEKNIK NCAT5E-50M, and we recommend using cable of similar quality, only. KLARK TEKNIK also
o ers the very cost-e ective DN9610 AES50 Repeater or DN9620 AES50 Extender for situations where extremely long cable runs are required.