6-English
Caution
• If the water is too hot, it may overow from the straw and vent
hole, causing scalding.
Do not pour in boiling water or other liquids.
• Do not store the water inside for too long.
• Do not over-tilt the insulated straw cup. Water may leak from
the straw and vent hole.
• Changes in temperature and air pressure will cause the air
expansion pressure inside the insulated straw cup to become
high. When exposed to strong impacts or shaking, the straw
and vent hole may eject water. Do not shake the insulated cup
strongly and take care when opening the lid to avoid scalding.
3. The water level should not be too high, it should be 3 cm below
the rim of the insulated straw cup to avoid overowing after the
lid is closed.
4. After pouring the water, tighten the lid clockwise and then close
the top cover. There will be a “click” sound when the top cover is
completely closed.
5. When drinking, please erect the insulated straw cup, press the
button, and turn the top cover as far as it goes.
6. Please close the top cover after drinking.
7. When carrying, make sure to tighten the lid, close the top cover,
and keep the insulated straw cup vertical. If there is water
leakage, check whether the components are assembled properly
immediately.
Caution
• In order to achieve a better insulation eect, you can ll in
hot water to preheat for 1 minute before use, pour out the hot
water and then use it. It is not necessary to cover the lid, and
do not shake the cup vigorously during preheating. Be careful
when preheating to avoid being scalded by the hot water.