190mm
UV Vacuum Cleaner User Manual
KC101
c : 圭 I自
Please read this instruction manual carefully before using the product and keep it properly.
5
9
Important safety instruction
Product Description
Operating Instruction
Cleaning & Maintenance
Trouble Shooting
Technical Parameters
Company Information
Important safety instruction
About this user manual
·Please read all the contents of this manual carefully before using this product.
·Keep this manual in a safe place. If you transfer the product to a third party, please attach
this manual together with the machine.
·Any operation that does not comply with the instructions of the manual may result in
serious personal injury, property damage or damage to the product itself.
·Our company does not bear the relevant legal liabilities for losses caused
by failure to follow the instructions in this product description.
Attention A
This product is not waterproof, please do not inhale water and damp dust.
This product is a household bed smashing device. Do not use it to absorb construction waste or heavy metal dust.
Personnel Safety
·For instructions on your personal safety, please read these carefully to avoid accidents and possible damage to the product.
·This product is not intended for use by people who have no experience and knowledge of bed mites, including children
at home, unless they are supervised and responsible for their safety
·When working on the product, please be careful to avoid danger.
·Do not stand or sit on this product.
·Keep this product in a safe place, and keep it out of reach of children and those who are unable to judge the environmental risks.
·Do not store this product in a high place to avoid the risk of accidental fall.
Product
safety instructions
This product is not intended for use by persons with
physical, sensory or intellectual disabilities or those who lack
experience and common sense (including children) unless they
are supervised or directed to ensure that they are safe to use.
This product is only suitable for working in a dry
environment. Do not use it in a humid environment.
Do not pump high temperature substances (cigarettes,
matches or hot ash), ultra-fine materials (such as lime, cement,
wood chips, gypsum powder, ash, toner, etc.), large pieces of
sharp pieces (such as glass, nails, pins, etc.) , dangerous goods
(such as solvents, detergents, etc.), chemicals (such as acidic
substances, detergents, etc.), flammable and explosive liquids
(gasoline, alcohol products)．
Keep the crystal flow passage and moving parts away
from the hair, loose clothing, fingers and body parts. Do
not point the air passage or tool at the eyes or ears.
Please check the clear area before use. If you find tall
paper, paper balls, plastic cloth or sharp objects, and
things that are thicker than the straw diameter, please
pre-exclude it to avoid the use of the pipeline is blocked
and the use is severe
If it is found, if it is found to be leaking or the motor
temperature is too high and abnormal sound, such as hot
body, abnormal sound, different sputum, weak service,
etc., should stop immediately.
Please check the dust cup regularly. If there is more
garbage inside, please clean it up in time, keep the
ventilation hole unobstructed to avoid the blockage and
cause the force to drop. The motor will start the ship and
reduce the service life of the hand-held wireless dust
collector
When cleaning the crystal, do not use lubricants,
detergents, polishes, etc. to clean any parts.
When the machine malfunctions, do not repair it
yourself. Please call our after-sales department for
assistance
This product is a power tool. Do not let the wireless
vacuum cleaner run alone without being taken care of.
Avoid getting the vacuum cleaner close to the heating
appliance or violent to avoid a fire.
Do not disassemble the dust cup, the UV lamp cover and
open the air hood when the machine is powered or
running to avoid injury or machine damage
If the adapter is damaged, you need to purchase the
original adapter
Warning About UV Rays
2
·
This product is equipped with ultraviolet sterilizing lamp, please
avoid to watch the bottom of the machine when the power is on and
the ultraviolet sterilizing function is on to prevent ultraviolet
radiation from causing harm to human body
·
Please don't expose animals and plants to ultraviolet rays to
avoid damage
·
Please do not concentrate uv rays in one place for continuous
use, which may cause damage to cleaning objects
·
When the ultraviolet sterilization lamp is opened, the eye
cannot direct the ultraviolet ray lamplight, also cannot illuminate
human body skin, lest cause damage to human body.
·
Ultraviolet germicidal lamp is open, not with strong light, or direct
sunlight photosensitive components at the bottom of the machine,
lest cause performance obstacle, affect the normal use and life, cause
accident harm to humans or animals
If used for a long time, the position of the protective lampshade
will accumulate dust, causing the UV lamp to keep on and lose the
protection function to human body. In this case, dust the surface of
the sensor probe with a clean cloth
Product Descripon
Power Switch
Dust cup release buon
Dust cup
Indicator light
Handle
UV flap indicator light
Flap Mode
Sucon Inlet
UV light
Range Sensor
Lamp cover knob
Rear wheel
Charging connector
Dust cup Stainless steel mesh HEPA holder
HEPA
Accessories List
Machine
Charging Base
Dust cup accessories (has been assembled)
Adaptor
User manual
Brush
Attention
Before assembling the product, please check the accessories list and confirm that all parts have been received
Operang instrucon
Preparaon before using
Attention
·Put the machine into the charging base, and the power indicator will flash in turn to start charging
·Please charge the battery fully when you use a new battery or first use it after long-term storage
·Please charge more than 3 hours before the first use
5
The power indicator flashes in turn when charging
·Make sure the components of the UV vacuum cleaner are assembled in place．
·Check whether the power is ．
sufficient to ensure the product works normally
Charging Instructions
·Plug the adapter into the char
．
ging base and the other end into the power socket
·Do not turn on when charging
·The power indicator light is fully charged when it is on in all three cases．
How to use
UV
and
Flap
Instructions
Indicator light
·
When the machine touches the object surface, the
infrared sensor detects the object. When the UV light is
on, the flap mode starts. Away from the surface of the
concealment object, the infrared induction probe cannot
sense the object, the UV light and the flap mode is closed,
the UV and the flap indicator work synchronously
•
3 lights 100%
•
2 lights 65%
•
1
light
30%
•
1 light to flash, need to be charged
Attention A
To avoid accidental pet injury, UV lamp equipped with
infrared sensor probe safety switch, off the surface of the
object automatically UV off.
6
UV and Flap indicator light
Switch button shortly, the light is on after starting up,
the machine is started, all functions are started with
one key, and the short button is pressed to turn off
(all functions are stopped)
Cleaning & Maintenance
Clean Dust Cup
Press the release button to remove the cup
©
Open the mesh in the main clockwise direction
�
二
y
�
Remove the dust cup
Clean the dust cup with the brush
Clean the metal filter cover, washable
C
l
e
a
n
H
E
P
A
w
i
t
h
b
r
u
s
h
7
叮
Exhaust Sponge
Hood release button
Press the release button to open the hood
Remove the air filter sponge , washable
ATTENTION A
All washable parts can be put into the main machine after they are dried.
Daily storage
• When not using the machine for a long time, please put the machine in a cool and dry place, do not put the machine in direct sunlight or moist
environment
·When you do not use the machine for a long time, please make sure to charge and discharge at least once every three months
8
Trouble shooting
When there is malfunction of the machine, please refer to the following chart for trouble shooting.
Details
Possible Reasons
Treatment
1
Low battery
please charge battery in time
Machine not work
2 Do not press the power switch
Press the switch
1
Metal mesh or the HEPA filter is blocked
Clean the dust cup
，
mesh or HEPA filter
Less suction
2 The suction of the machine is blocked
Clean the suction
1 Object surface is not smooth or the machine
bottom does not fully touch the object, resulting in
the induction probe in a protective state
UV light not work
Keep the surface flat or the
machine bottom the in full contact
with the cleaned object
2 lamp tube damaged
Change the lamp tube
Stop using and clean up
the blockage
Too much noise
1
Full dust cup
2 The machine suction is blocked
3
T
he dust cup filter or HEPA filter is blocked
4 No filtering component is installed
Install the filter component
9
Technical Parameters
Product Type
UV Vacuum Cleaner
Product model
Voltage
Power
Max Power
Capacity
UV lamp power
N.W.
1.3kg
Charging time
Adapter voltage Input
Adapter voltage Output
Working time
Battery capacity
Hazardous Substances Contained in Components
Hazardous Substances
Components
Lead
Mercury
Cadmium
Chromium
Polybrominated
bipheny
Polybrominated diphenyl
ethers
(Pb)
Plastic
。 。
。 。 。 。
Motor
x
。 。 。 。 。
Circuit boards
and components
。 。 。 。 。 。
Adapter
。 。 。 。 。 。
Metal Parts
。 。 。 。 。 。
Battery
。 。 。 。 。 。
Others
。 。 。 。 。 。
The chart is based on the regulation of SJ/T11364
O: Means the content of the hazardous substance indicated in contained in the component is within
the limits set by GB/T26572.
X: Means the content of the hazardous substance indicated in contained in the component is higher than the
limits set by GB/T26572.
(All components labeled with X met the requirement of European Union RoHS, Or no substitutes can be found
due to current technology level)
(This chart covers all the products of SWDK. However, not every products contain all 11
components described in the charts)
＠⑧
/
