EcoFlow RIVER Max Plus ユーザーマニュアル

User Manual

Contact us:

www.ecoflow.com

WARNING

1. Keep EcoFlow™ RIVER Max Plus("RIVER Max Plus") and the

accessories dry. DO NOT expose the product and accessories

to high heat.

2.Never disassemble, puncture, shock, damage, or incinerate

the product.

3. Recycle and dispose of RIVER Max Plus in accordance with

local laws and regulations.

4. Pay attention to safety when handling the RIVER Max Plus.

5. Children or people with disabilities should use the product

under adult supervision.

EcoFlow RIVER Max Plus

The following terms are used in this document to indicate various levels of potential harm that may be caused

by improper operation.

The instructions, if not properly followed, may result in property damage and minor physical damage.

The instructions, if not properly followed, may result in property damage and serious physical damage.

The instructions, if not properly followed, may result in property damage, major accident and serious injury.

Product Use:

Product Safety Guidelines

Glossary

NOTICE

CAUTION

WARNING

Product Disclaimer

WARNING

Read the ENTIRE User Manual before operating. Failure to operate the product correctly may result in

damage to the product or personal property and cause serious injury. EcoFlow will not assume any legal

responsibility. DO NOT use the product with incompatible components or alter the product in any way

without following the instructions provided by EcoFlow. Failure to follow these instructions will render

EcoFlow after-sales services and the product warranty void. These Safety Guidelines include instructions

for safety, operation and maintenance. It is important to read and follow all the instructions and warn-

ings in the user manual before assembly, setup, or use.

1. DO NOT expose the product to any liquids. Do not immerse the product in water. DO NOT leave the batteries

out in the rain or near a source of moisture. Moisture in the RIVER Max Plus could cause short circuits, compo-

nent failure, fires or even explosions.

2. Never use non-EcoFlow parts. Go to http://www.EcoFlow.com to purchase new parts. EcoFlow takes no re-

sponsibiliies for any damage caused by the use of non-EcoFlow parts.

3. Never install or remove other modules from the RIVER Max Plus when it is turned on. DO NOT plug or unplug

other modules when the power of the product is turned on, otherwise the power interface may be damaged.

4. Using the product in environments above 140ºF (60°C) may cause fires or explosions. Using the product

below -4ºF (-20°C) will severely affect the performance of the product. Allow the product to return to a normal

operating temperature before using it.

5. DO NOT use the batteries in strong electrostatic or electromagnetic environments. Otherwise, the battery

control board may malfunction and cause a serious accident during use.

Read all safety tips, warning messages, terms of use and disclaimers carefully. Refer to the terms of use and

disclaimer at https://ecoflow.com/pages/terms-of-use and stickers on the product before use. Users take full

responsibility for all usage and operations. Familiarize yourself with the related regulations in your area. You are

solely responsible for being aware of all relevant regulations and using EcoFlow products in a way that is com-

pliant.

Improper use may result in ﬁre, property damage, or personal injury. Make sure to use the product ac-

cording to the following safety rules and guidelines.

Travel Notice:

Product Battery Disposal:

Product Maintenance:

Product Storage and Transportation:

Product Charging:

6. Never disassemble or puncture the product in any way. Otherwise, it may leak, catch on fire, or explode.

7. DO NOT use the product if it was involved in a crash, accident, or a forceful jolt.

8. If the product falls into the water during use, take the product out immediately and put it in a safe and open

area. Keep a safe distance from it until it is completely dry. Never use it again and dispose it properly as de-

scribed in the Battery Disposal section below. If the product catches fire, it is recommended to use fire extin-

guishing equipment in the following order: water or water mist, sand, fire blanket, dry powder fire extinguisher,

and carbon dioxide fire extinguisher.

9. DO NOT put the product in a microwave oven or in a pressurized container.

10. DO NOT allow pins, wires, or other metal pieces to enter the RIVER Max Plus case, outlets, or controls. Metal

pieces may short circuit the product.

11. Avoid collisions. DO NOT place heavy objects on top of the RIVER Max Plus.

12. If there is dirt on any plug or outlet surface, use a dry cloth to clean it. Otherwise, it will cause abrasion and

result in energy loss or the inability to charge.

1. Always use EcoFlow approved charging cables. EcoFlow does not take any responsibilities for any damages

caused by using non-EcoFlow charging cables.

2. DO NOT use RIVER series portable power station AC charging cables on DELTA series power stations. Eco-

Flow takes no responsibilities for any damages caused by customers’ failure to follow instructions. Doing so will

void the warranty.

3. When charging, please place the product on the ground with no flammable or combustible materials around

it. To prevent accidents, never leave the product unattended during charging.

4. DO NOT charge the product immediately after a long or heavy load, because the device temperature may

become too high. DO NOT charge the device until it cools down to room temperature.

1. Keep the product out of the reach of children. If any child accidentally swallows any parts, please seek medical

attention immediately.

2. If a low-battery warning appears, charge the product before storing it. Otherwise, long-term storage may

cause damage to the batteries in the product. Batteries in the product will enter hibernation mode if they are

depleted and stored for a long time. Recharging the product can bring the battery out of hibernation.

3. DO NOT place the product near a heat source, such as inside a car in direct sunlight, a fire source, or an operating stove.

4. Store the product in dry environments. Please keep it away from water.

5. Make sure no objects can fall on or around the product while it’s being stored.

6. Never ship a product with a battery power level higher than 30%.

Do not bring this product on flights.

1. Dispose of RIVER Max Plus in specific recycling boxes only after a complete discharge. Batteries are hazard-

ous chemicals. Please strictly follow your local regulations regarding the battery disposal and recycling.

2. Dispose of the product if it cannot be powered on after over-discharging.

1. Temperature for normal use and storage of this product is -4°F to 113°F (-20°C to 45°C) and temperature for

optimal use and storage of this product is 68°F to 77°F (20°C to 25°C).

2. If the product is not used for a long time, the battery life may be reduced.

3. Discharge RIVER Max Plus to 30%, then charge to 85% every 3 months to keep the battery healthy.

FCC Statement:

FCC Radiation Exposure Statement:

This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This product may not cause harmful interference, and

(2) This product must accept any interference received, including interference that may cause undesired

operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator &

your body.

Changes or modiﬁcations not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

WARNING

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

1. Orient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

NOTICE

RIVER Max Plus Usage and Safety Guide

NOTICE

To turn RIVER Max Plus on or off, you need to PRESS and HOLD the ON/OFF System Power Button. To turn

on the AC power outlet, you need to PRESS and HOLD the AC Button after turning on RIVER Max Plus. Users

can turn off AC power when they don’t need it and save power. Please follow this step-by-step introduction

to understand RIVER Max Plus’ buttons, display screen, and more. Please fully charge (100%) RIVER Max Plus

before using it.

Congratulations!

You are now an EcoFlow RIVER Max Plus user. This brief pamphlet is meant to help you. Please take some time

to read it carefully before using the product.

CONTENTS

EcoFlow App Download Guide

RIVER Max Plus Features

Ambient Light

LCD Display Introduction

Protection and Error Information

Connecting the Solar Panels

Entry-Level UPS

AC X-Boost Mode

Technical Specifications

How to Recharge RIVER Max Plus

RIVER Max Plus FAQ

What’s in the Box

1

2

5

6

7

10

11

12

13

14

15

1

1. Download the EcoFlow App

Privacy Policy

EcoFlow App Download Guide

Search for “EcoFlow” in Google Play Store or App Store to download the app.

You can also scan this QR code with your phone, or you can enter the down-

load link in your browser:

https://ecoflow.com/pages/ecoflow-app

By using EcoFlow Products, Applications and Services, you consent to the EcoFlow Term of

Use and Privacy Policy, which you can access via the “About” section of the “User” page on the

EcoFlow App or on EcoFlow Official website at

https://ecoflow.com/pages/terms-of-

use and https://ecoflow.com/pages/privacy-policy.

2. For more information, please follow the instructions in the app or on our official

website www.ecoflow.com.

2

1. LCD Display

2. USB-A Output Ports

3. ON/OFF Button of LED Light

4. IOT Reset Button

(PRESS & HOLD 3s to reset Wi-Fi)

5. USB-C 100W Output Port

6. Power Button & LCD Display Screen

ON/OFF & Power Indicator

7. DC Output

ON/OFF Button

(Car

Outlet, 2 DC 5521 Output Ports) & DC

Output Indicator

8. Fast Charge USB-A Output Port

9. AC Power Button (PRESS for ON/

OFF) & AC Output Indicator

10. 3 AC Output Sockets (100-120V version)

2 AC Output Sockets (220-240V version)

12. X-Stream Charging Input Port

13. Overload Protection Switch

14. Solar Charge/Car Charge Input Port

15. Power Earth Screw

16. Ambient Light

11. Ventilation Fan

Features of the RIVER Max Plus

7

8

16

1

2

3

65

4

AC ON/OFF

220-240V region*Dedicated AC Output

*EcoFlow has designed different AC output sockets

following the local regulations of different countries.

9

11

10

15

141312

Expansion Power Port

Displays various conditions of the product.

Charge a wide array of devices such as smart phones, tablet, GoPro, speakers, or anything else that could be

charged through USB-A Port. The USB-A output icon will appear on the LCD display when a USB-A port is in use.

1. LCD Display

2. USB-A Output Ports

3

3. ON/OFF Button of LED Light

4. IOT Reset Button (PRESS & HOLD 3s to reset Wi-Fi)

5. USB-C 100W Output Port

6. Power Button & LCD Display Screen ON/OFF Power Indicator

7. DC Output Port (Car Outlet, 2 DC 5521 Output Ports) & DC Output Indicator

8. Fast Charge USB-A Output Port

9. AC Power Button AC Output Indicator

10. 3 AC Output Sockets (100-120V) / 2 AC Output Sockets (220-240V)

11. Ventilation Fan

There’re three types of LED light: low light, strong light, and SOS rescue signal flash. Press it once to turn on

the low light; press it twice to turn on the strong light; press it one more time to turn on the SOS rescue signal

flash; then press it again to turn off the LED light. Long press can turn off the LED directly.

When you first use IOT function or you are changing the network environment, you need to press and hold IOT

Reset button for 3 seconds to reset the Wi-Fi. It can connect with the mobile phone, then reconfigure the

wireless network through the APP. When using the IOT mode, make sure the power station has sufficient

amount of power or is connected to a power source to keep IOT standby.

Devices that charge through a USB-C port, such as a MacBook Pro, Android phone, can be charged by the RIV-

ER Max Plus USB-C port. The USB-C Output icon will appear on LCD Display when the USB-C port is in use.

The USB-A output icon will appear on the LCD display when the port is in use. Fast charge-enabled devices can

be charged at a maximum speed of 28W. If your device does not support fast charging, the device will charge in

a normal speed.

The AC power button controls the AC output of the RIVER Max Plus. The AC power needs to be turned on man-

ually. To enable AC power, press the AC power button. When AC power is not in use to charge a device, press

the AC power button to turn off the AC power. Make sure to unplug the power cord from the AC port. When the

AC power of the RIVER Max Plus is enabled, the AC indicator will light up. If the AC power is not used for more

than 12 hours, the AC ports will turn off automatically.

Charge devices that require a 220-240V (220-240V region)/100-120V (100-120V region) wall charger such as

laptops, TVs, refrigerators, vacuums, etc. The X-Boost feature enables the built-in 600W inverter to support

600W to 1200W devices by lowing their power required. This feature does not support all electrical devices

with higher power rating, please test to confirm before use. It is not recommended to use the RIVER Max Plus

to power heavy-duty devices e.g., air conditioners, coffee machines, clothes dryer, electric camp stoves, full size

refrigerators, microwaves, mowers, ovens, washing machines etc.

Press DC ON/OFF to turn on or off RIVER Max Plus DC power. The DC power button controls the RIVER Max

Plus's car charger output and two direct currents (DC 5521) outputs. The car charger output supports an output

up to 10A, which is sufficient to power most electrical appliances used in vehicles. When the DC ON/OFF switch

is on, the product will not shut down on its own until it runs out of power.

Press the system power button once to turn the RIVER Max Plus on. Press and hold the system power button to

turn the RIVER Max Plus off. When RIVER Max Plus is turned on, the power indicator is in breathing mode, and

the display is on; When the RIVER Max Plus is running, you can switch on or off the display screen by pressing

the Power Button once. When RIVER Max Plus senses that any output port is in use, the display will automatical-

ly light up. The RIVER Max Plus screen will enter into the sleep mode after being in idle for more than 5 minutes,

but the battery will still be running. The system standby time is 2 hours by default. You can set up the system

standby time and screen standby time via the App.

The fan prevents RIVER Max Plus from overheating. Please make sure nothing blocks the vents at both ends of

the RIVER Max Plus.

4

Plug in the AC Charging Cable into the port and connect the AC Charging Cable to an AC power source. The

U.S. and Japanese version support 100Vac-120Vac (50Hz/60Hz) / international version supports 220Vac-

240Vac (50Hz/60Hz) charging.

When the input current continuously exceeds 10A during a charge, the AC charging port will trigger the

overload protection (the Overload Protection Switch button will automatically pop out). When the product is

confirmed to be normal, press the overload protection switch button to continue charging.

Show power and charging status signals. Adjust the color, brightness and lighting mode on the EcoFlow App.

12. X-Stream Charging Input Port

13. Overload Protection Switch

14. Solar Charge/Car Charge Input Port

16. Ambient Light

Connect at most two 110W solar panels in parallel to recharge RIVER Max Plus. RIVER Max Plus supports a solar

input of 10-25Vdc, 200W, 12A Max. RIVER Max Plus supports 12V car charge up to 8A. (Remember to start the

engine when you charge via car charge, otherwise, the car battery may be drained.) Do not use the same ciga-

ratte lighter port to charge other devices when recharging RIVER Max Plus. The RIVER Max Plus outlets can still

be used to charge your devices when the RIVER Max Plus is recharging via car charge.

15. Power Earth Screw

For safety reasons, some eletrical appliances need to be grounded. The power earth screw provides an option to

get your RIVER Max Plus grounded using a grounding cable.

5

Ambient Light

1. Status Signals

Power ON: The blue light will move from

the middle to the sides of the panel.

Power OFF: The blue light will move from

the sides to the middle of the panel.

Charging: The blue light will move from

left to right of the panel, repeatedly.

2. Customizing the Ambient Light

Enter Module Settings on the EcoFlow app to

access ambient light features.

• The ambient light can be turned on / off,

kept on, or put on a standby mode.

• Select the ambient light color.

• Adjust the brightness of the light.

• Select the lighting mode. (There are five

unique lighting modes to choose from).

6

i

LCD Display

This number indicates the remaining charge / discharge time (mins).

a. Remaining Charge/Discharge Time

d. High Temperature Indicator

e. Low Temperature Indicator

f. Fan Indicator

g. Current Input

h. Current Output

Shows the fan speed, which is controlled by RIVER Max Plus automatically.

Shows the current input power of RIVER Max Plus in watts.

Shows the current output power of RIVER Max Plus in watts.

Shows the remaining power (%). If the display shows 0%, please charge RIVER Max Plus immediately.

b. Battery Level Indicator

c. Battery Level Percentage

Shows the remaining power. The icon rotates while charging. When remaining power reaches 0%, the icon

flashes to warn of low battery. Please charge RIVER Max Plus immediately.

When the temperature of the RIVER Max Plus is too high, a high-temperature warning icon appears on the

screen. Please cool down the product before use.

When the temperature of the RIVER Max Plus is too low, a low-temperature warning icon appears on the

screen. Please warm up the product properly before use.

j

k l m n o p

7

Protection and Error Information

i. Overload Warning

The overload icon appears along with a second icon indicating what part of the RIVER Max Plus is in an over-

load condition.

The RIVER Max Plus display screen showcases different icons to indicate errors or prompts.

Read the information below to understand the icons and what to do when they appear.

USB-A Overload

Protection

Icon(s): USB-A and OVERLOAD icons flash together.

What to do: Disconnect all electrical appliances and

wait 10 seconds before connecting each appliance

again.

USB-C High-Temperature

Protection

High-Temperature

Recharging Protection

Icon(s): USB-C and High-Temperature icons flash

together. What to do: Disconnect all electrical appli-

ances and wait until RIVER Max Plus has cooled down

before connecting each appliance back.

Icon(s): Recharging Time, Battery Exclamation, and

High-Temperature icons flash together.

What to do: This will happen especially when you recharge

the RIVER Max Plus immediately after a heavy battery use.

Disconnect Charging Cables and all electrical appliances

and wait until RIVER Max Plus has cooled down before

plugging Charging Cable back in and recharging.

USB-C Overload Protection

Icon(s): The USB-C icon and the OVERLOAD icon

flash together.

What to do: Unplug the appliances, the unit will auto-

matically resume operation after 10 seconds.

Port Usage Indicators

When the SOC (State of Charge) is set in the EcoFlow App, the UPS icon

will appear on the screen.

The Extra Battery icon will appear when Extra Battery is connected to the

main model.

The AC indicator icon will appear when the AC power button is turned on.

The USB-A output icon will appear on the LCD display when a USB-A port is in use.

The USB-C output icon will appear on the LCD display when a USB-C port is in use.

The Car Power Output icon will appear on the LCD display when a Car Output

port is in use.

The icon will appear when the unit is connected to the App.

Extra Battery Indicator

AC Indicator

USB-A Indicator

USB-C Indicator

IOT Indicator

Car Power Output Indicator

UPS Indicator

j

k

l

m

n

o

p

Battery Indicator

Refers to the battery

8

Communication Failure

between the Main Board

and BMS

Light stays on

Icon(s): Exclamation icon flashes.

What to do: Restart the RIVER Max Plus.

Icon(s): Exclamation icon flashes.

What to do: Restart RIVER Max Plus.

Communication Failure

between the Main Board

and AC

Inverter Output Overload

Inverter High-Temperature

Protection

Icon(s): AC icon flashes.

What to do: Restart the RIVER Max Plus.

Icon(s): AC and OVERLOAD icons flash together.

What to do: Turn off RIVER Max Plus. Unplug all appli-

ances. Wait 10 seconds, turn System Power ON then

AC Power ON and plug each appliance back in in turn.

If the icons keep flashing, do not charge or discharge

the unit. Please note that electrical appliances must

be operated within rated power. (For more informa-

tion about X-Boost function, go to P12.

Icon(s): AC and High-Temperature icons flash together.

What to do: Turn off RIVER Max Plus and let it cool

down. Then turn System Power On and AC Power On.

High-Temperature

Discharging Protection

Low-Temperature

Recharging Protection

Low-Temperature

Discharging Protection

Icon(s): Battery Exclamation and High-Temperature icons

flash together.

What to do: Turn OFF System Power and let RIVER Max

Plus cool down before turning the System Power back on.

Icon(s): Recharging Time, Battery Exclamation, and

Low-Temperature icons flash together.

What to do: Disconnect Charging Cables and all electrical

appliances and place RIVER Max Plus in warm er place

before plugging Charging Cable back in and recharging.

Icons(s): Battery Exclamation and Low-Temperature

icons flash together.

What to do: Turn OFF System Power and place RIVER

Max Plus in warmer place before turning the System

Power back on.

Overload

Recharging-protection

Overload Discharging

Protection

Icon(s): Battery Exclamation and OVERLOAD icons

flash together.

What to do: Disconnect all appliances, restart the RIV-

ER Max Plus, and add each appliance back in in turn.

Please note that electrical appliances must be operat-

ed within rated power.

Icon(s): Recharging Time, Battery Exclamation, and

OVERLOAD icons flash together.

What to do: Unplug the charging cables, restart the

RIVER Max Plus, and plug back the charging cables

back in.

The icon will appear when the unit is connected to the App.

9

Car Charger Overload

Car Charger High-Tempera-

ture Protection

Icon(s): Car and OVERLOAD icons flash together.

What to do: Restart RIVER Max Plus, make sure all

electrical appliances are used within the specified

power range.

Icon(s): Car and High-Temperature icons flash togeth-

er.

What to do: Turn RIVER Max Plus off and let it cool

down. Turn System Power On then DC Power On.

*If the product is not operating properly or the icon keep flashing, please contact the customer support team.

Do not charge the unit.

Inverter Low-Temperature

Protection

Icon(s): The AC and Low-Temperature icons flash

together.

What to do: Turn off RIVER Max Plus, move RIVER

Max Plus to a warmer place and wait for the inverter

to warm up. Turn the AC Power off; the unit will auto-

matically recover.

Fan Blockage

Icon(s): Fan icon flashes.

What to do: Turn the RIVER Max Plus off, carefully

clean, and vacuum around the vents on both sides of

the product. Then turn the RIVER Max Plus on.

10

Connecting the Solar Panels

How to Recharge the RIVER Max Plus Using Solar Panels

For full step-by-step instructions about how to connect RIVER Max Plus with solar panels, please refer to the So-

lar Panel User Guide.

The RIVER Max Plus can support a 10-25V DC input. When the input exceeds 25V, the RIVER

Max Plus overvoltage protection will be activated. Overvoltage may damage the product. Users

should read these instructions carefully because any incorrect use of solar panels that leads to

product damage will void the EcoFlow warranty.

Charging Method 1

RIVER Max Plus Charging Port

XT60 Connector

RIVER Max Plus

MC4 Connector

SOLAR PANEL-21.6V

Users can connect a solar panel as shown in Example 1. DO NOT attempt to connect more than one solar panel

in series.

1. Connect the solar panel to the MC4 to XT60 Solar Charging Cable. Connect the XT60 connector to the RIVER

Max Plus’ XT60 input port to charge the RIVER Max Plus. Users can connect up to 2 sets of solar panels in paral-

lel to the MC4 port as shown in Example 2.

2. If you want to connect 2 sets of solar panels, connect them with our solar MC4 parallel connection cable and

connect the solar MC4 parallel connection cable to the MC4 to XT60 Solar Charging Cable. Then Connect the

XT60 connector to the RIVER Max Plus’ XT60 input port to charge the device. The parallel connection cable is

an optional accessory that is sold separately.

Note: The EcoFlow Solar MC4 Parallel Connection cable is an optional accessory that needs to be purchased

separately. The charging methods below are with respect to using the EcoFlow 110W Solar Panel.

1. Recommend Charging Method

11

Charging Method 2: (Parallel Connection Only)

RIVER Max Plus Charging Port

XT60 Connector

SOLAR PANEL-21.6V X2

Solar MC4 parallel connection cable

* Users need to buy the solar panels and related

parallel connection

accessories on their own.

RIVER Max Plus

2. Connecting Third-Party Solar Panels to RIVER Max Plus

SOLAR CABLE

SOLAR PANEL

-

+ +

-

Users can buy their own third-party solar panels to power RIVER Max Plus, provided that the solar panels have

a standard MC4 connection and the voltage and current (10-25V DC, 12A Max) comply with the specifications of

RIVER Max Plus. The third-party solar panels will be able to recharge RIVER Max Plus through the MC4 to XT60

cable. EcoFlow does not provide free repair services for any damage to the power station caused by third-party

products.

RIVER Max Plus Entry-level UPS Use Reminder

Entry-Level UPS

RIVER Max Plus’ X-Stream system supports an entry-level UPS function. You can use the RIVER Max Plus AC socket

while the RIVER Max Plus is connected to an AC power source (your devices or appliances connected the RIVER Max

Plus AC sock et will get power from the AC power source, not the RIVER Max Plus battery). When the AC power source

loses power suddenly, the RIVER Max Plus will switch to provide power to the devices and appliances connected to it in

<30ms. This is considered as an “entry-level” grade UPS function that does not support 0ms switching.

Do not connect devices with strict uninterrupted power supply requirements. Perform multiple tests to confirm com-

patibility before connecting devices such as data servers and workstations with RIVER Max Plus. EcoFlow will not be

responsible for any loss of data or equipment damages caused by customers’ failure in following the instruction.

In accordance with the UL2743 standard, the AC outlets of the RIVER Max Plus are in a double blade, ungrounded con-

figuration, it is recommended to use the UPS function only for temporary emergency usage rather than for long-term

usage. DO NOT connect the RIVER Max Plus to devices or electrical appliances with bare metal when charging to avoid

the risk of electric shock.

12

Entry-Level UPS User Guide

AC X-Boost Mode

Users can connect the AC charging cable of RIVER Max Plus to an AC power source, connect a device to

RIVER Max

Plus

, and turn on the AC switch to automatically enter the entry-level UPS mode. When the AC

power source is cut off, power will be supplied from the battery of RIVER Max Plus to power your device (as

shown below).*

UPS is only applicable to electrical appliances below 600W. To avoid an Overload condition, do not attempt

to power any equipment drawing more than 600W of power. EcoFlow will not be responsible for any loss of

data or equipment damages caused by careless use or customers’ failure to follow the instructions. Only one

RIVER Max Plus can conduct the UPS function; the UPS function is not available when more than one RIVER

Max Plus is connected together. Please follow the connection instructions below:

With the built-in 600W inverter, you can use the X-Boost feature to power 600W-1200W appliances without

the disruption caused by overload protection. Traditional inverters will overload when one electrical appliance

with a higher rated power is connected. Meanwhile, RIVER Max Plus’

built-in inverter, which has the X-Boost fea-

ture, enables the powering of 600W-1200W electrical appliances. Please take note of the following when using

X-Boost:

1. The X-Boost mode is enabled by default. You can use the EcoFlow App to turn this function on/off.

2. The X-Boost mode is not available in the following situations: the charging state and X-Boost mode off state.

3. When using appliances with a rated power of 600W-1200W, please connect only one appliance. When

connecting more than one electrical appliance, the change of voltage may affect the usage of other electrical

devices.*

* You may use electrical appliance with heating elements and a rated power between 600W-1200W, such as

hair dryers and electric kettles. But the X-Boost mode is not applicable for all electrical devices. Some devic-

es with a rated power of 600W-1200W that have strict voltage requirements are still not compatible. Please

conduct a full test to confirm before usage. It is not recommended to use the RIVER Max Plus so charge

heavy-duty devices, such as air conditioners, coffee machines, clothes dryer, electric camp stoves, full size re-

frigerators, microwaves, mowers, ovens, washing machines etc.

13

Technical Specifications

General Specs

Outputs

Input

Battery

Net Weight

Dimensions

Pack Capacity

Single Cell Equivalent Capacity

Testing and certification

AC Output (x3) /

(x2 International Version) Full Sine Wave

USB-A Output (x2)

USB-A Fast Charge (x1)

USB-C Output (x1)

Car Power Output (x1)

DC5521 Output (x2)

Solar Charge Input

Car Charger (Example 2)

AC Charge Input Power (Example 1)*

Cell Chemistry

Discharge Temperature*

Charge Temperature*

Shelf Life

Cycle Life

Lithium-ion

-4°F to 140°F (±5°F), -20°C to 60°C (±3°C)

32°F to 113°F (±5°F), 0 to 45°C (±3°C)

1 Year (after fully charging the device)

800 cycles to 80%+ capacity

AC Charge Input Voltage 100-120Vac (50Hz/60Hz)

International Version 220-240Vac (50Hz/60Hz)

200W, 10-25Vdc, 12A Max

12Vdc 8A Max

X-Stream Charge 660W Max

600W (Surge 1200W) total, 120Vac (50Hz/60Hz) /

230Vac (50Hz/60Hz)

5Vdc, 2.4A, 12W Max, per port

5Vdc, 9Vdc, 12Vdc, 2.4A, 28W Max

5Vdc, 9Vdc, 12Vdc, 15Vdc, 20Vdc, 5A, 100W Max

136W, 13.6Vdc, 10A Max

13.6Vdc, 3A Max(per port)

17.6 lbs (8.0kg)

11.4 x 7.3 x 9.3 in (28.9 x 18.4 x 23.5 cm)

720Wh (28.8V, 25Ah)

200,000mAh @ 3.6V

UL Standard, CE, FCC, RoHS, RCM

* Please Note: The following information has been obtained under supervised test conditions.

14

AC Charging Cable

Car Charging Cable

0-80% charged in 1 hour

0-100% charged in 1.6 hour

Example 1:

Example 2:

0-100% < 8 hours

How to Recharge RIVER Max Plus

<2 hrs

<8 hrs

X-Stream Charging

(660W Max)

Car Charger

(96W Input)

(AC Charging Cable included)

(Car Charging Cable

included)

Can RIVER Max Plus Power Devices and Charge at the Same Time?

RIVER Max Plus has an AC charging port and an XT60 charging port located on the side. RIVER Max Plus can

be charged with a 12V car charger, solar panels, or with AC power.

Yes, RIVER Max Plus can power devices at the same time as charging.

RIVER Max Plus FAQ

How to Clean RIVER Max Plus?

RIVER Max Plus is a versatile, durable power station that can be used in many types of applications. You can

clean RIVER Max Plus using a dry, non-abrasive cloth. Use detergent that is used for cleaning mobile phones

and computer screens if you need to clean RIVER Max Plus more thoroughly. DO NOT expose RIVER Max

Plus to excessive amounts of liquid, as doing so can damage the product or result in injury.

15

RIVER Max Plus

User Manual and

Warranty Card

DC5521-DC5525

Cable

AC Charging Cable

(Input)

Car Charging Cable

(Input)

Solar Charging Cable

(MC4 to XT60 Input)

What’s in the Box

How to Store RIVER Max Plus?

How to Use RIVER Max Plus Safely?

How to Upgrade RIVER Max Plus Firmware?

Is RIVER Extra Battery compatible with RIVER Plus?

Please use RIVER Max Plus in its recommended operating temperature range. Using RIVER Max Plus out of the recom-

mended operating temperature range may cause the power station to exceed safe and effective working limits. RIVER

Max Plus is not waterproof. DO NOT immerse RIVER Max Plus in water. Doing so will void the warranty.

If RIVER Max Plus is used to power electrical devices with heating elements for over 30 minutes, such as a

hairdryer, the power station may enter a high-temperature protection mode. Please wait for about 1 hour

before charging the River Max Plus, or using it to power devices again.

The firmware can be upgraded using the EcoFlow App. Turn on the RIVER Max Plus before firmware upgrade. It is

recommended that the RIVER Max Plus is connected to an AC power source or has about 50% battery level when

upgrading. Please do not use RIVER Max Plus to recharge your appliances and devices during firmware upgrade.

For more details, please refer to “How to upgrade firmware” FAQ in the EcoFlow App.

No. RIVER Extra Battery is only compatible with RIVER power station. It does not work with RIVER Plus power station.

RIVER Plus Extra Battery is only compatible with RIVER Plus power station. It does not work with RIVER power station.

EcoFlow™ is a trademark of Shenzhen EcoFlow Technology Limited (abbreviated as “EcoFlow”) and its affili-

ated companies.

Store RIVER Max Plus in a dry and cool environment, away from any abrasive objects. DO NOT store or place

RIVER Max Plus near water. Please turn off the RIVER Max Plus and store it within its recommended use and

storage temperature range. If you need to store the RIVER Max Plus for a long time, please discharge the

RIVER Max Plus to 30%, then charge it to 85% every 3 months.

ページが読み込まれています...

EcoFlow RIVER Max Plus ユーザーマニュアル

このマニュアルも適しています

EcoFlow RIVER Max Plus ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント