EcoFlow RIVER 2 ユーザーガイド

ECOFLOW RIVER 2

User Manual V1.0

•EN

•FR

•CHT

Disclaimer

Read this user manual carefully before using the product to ensure that you completely

understand the product and can correctly use it. After reading this user manual, keep it properly

for future reference. Improper use of this product may cause serious injury to yourself or others,

or cause product damage and property loss. Once you use this product, it is deemed that you

understand, approve and accept all the terms and content in this document. EcoFlow is not

liable for any loss caused by the user's failure to use the product in compliance with this user

manual.

In compliance with laws and regulations, EcoFlow reserves the right to nal interpretation of

this document and all documents related to the product.This document is subject to changes

(updates, revisions, or termination) without prior notice. Please visit EcoFlow's ofcial website

to obtain the latest product information.

3

Content

Specications

Safety Instructions

EcoFlow App

Product Details

Power On/Off

Charge Your Devices

Charge RIVER 2

What's in the Box

Overview

LCD Screen

AC Charging (Grid Charging)

Solar Charging

Car Charging

1

2

4

5

4

6

7

8

9

USB-C Charging 9

FAQ

Additional Features

Troubleshooting

Care and Maintenance

10

11

12

X-Boost

EPS

1

Specications

General Information

Weight Approximately 3.5kg (7.8lbs)

Dimensions 245 x 215 x 145mm (9.6 x 8.5 x 5.7inches)

Capacity 256Wh (20Ah 12.8V )

Wi-Fi (2.4G)

Frequency range :

20M: 2412-2462MHz/40M: 2422-2452MHz

Maximum output power : 0.071W

Bluetooth Frequency range : 2402-2480MHz

Maximum output power : 0.005W

Model EFR600

Input Specifications

AC Input 100V-120V~50Hz/60Hz, 8A Max

Car Charging Input 12V/24V 8A, 100W Max

Solar Charging Input 11-30V 8A, 110W Max

USB-C Input 5/9/12/15/20V 3A, 60W Max

Output Specifications

USB-C Output 5/9/12/15/20V 3A, 60W Max

USB-A Output 5V 2.4A 12W Max per port

DC Output 12.6V 8A, 100W Max

AC Output Pure sine wave, 300W total (600W peak),

120V~50Hz/60Hz*

Battery Specifications

Cell Material LFP battery

Cycle Life 80%+ capacity after 3000 cycles

Operating Temperatures

Optimal Ambient Temperature for Operation 20°C~30°C(68°F to 86°F)

Ambient Temperature for Discharging -10°C~45°C(14°F to 113°F)

Ambient Temperature for Charging 0°C~45°C(32°F to 113°F)

Ambient Temperature for Storage -10°C~45°C (optimal: 20°C~30°C)

14°F to 113°F (optimal: 68°F to 86°F)

*Do not switch the AC output frequency at will, as it may cause some electrical appliances to

stop working.

2

Safety Instructions

WARNING – When using this product, the following precautions should be

adhered to:

1. Do not use the product near a heat source, such as a re source or a heating furnace.

2. When using the product, please strictly follow the operating environment temperature

specied in this user manual. If the temperature is too high, it may result in a re or explosion;

if the temperature is too low, the product performance may be severely reduced, or the product

may cease to work.

3. If this product accidentally catches re, we recommend that you use the re extinguishers in

the following order: water or water mist, sand, re blanket, dry powder, and carbon dioxide re

extinguishers.

4. Do not allow this product to come into contact with any liquid. Do not use this product in the

rain or high humidity.

5. It is recommended that you use moisture barrier bags in humid environments (for example,

places by the sea or waterways) to prevent the product from getting wet.

6. If water is found inside the product, or the product is accidentally dropped into water, it must

not be used or turned on again. Please place it in a safe open area, and stay away from it

until it is completely dry. Please do not approach the product before it is dry. Please take anti-

electric shock measures before touching the product. The dried product should not be used or

discarded at will. Please properly dispose of it after contacting Customer Service.

7. Use a dry cloth to clean dirt from the product ports.

8. Do not use this product in an environment with strong static electricity or strong magnetic eld.

9. Do not stack any heavy objects on the product.

10. Store the product in a dry and ventilated place.

11. Keep this product out of reach of children and pets.

12. Do not place the battery in a low air pressure environment, as this may cause flammable

liquids to leak or even an explosion.

13. Do not disassemble or puncture this product in any way with sharp objects.

14. Do not forcibly block the fan during use.

15. Do not touch the product port with wires or other metal objects to avoid short circuit or other

risks.

16. When using or transporting this product, please avoid impact, falls and violent vibrations. In

case of a severe impact, stop using this product immediately and turn off the power.

17. Do not use unofcial components or accessories as this will void the warranty. Consult ofcial

EcoFlow channels if you need to replace any component or accessory.

18. This product is not recommended for powering medical emergency equipment related

to personal safety, including but not limited to medical grade ventilators (hospital CPAP:

Continuous Positive Airway Pressure) or articial lungs (ECMO: Extracorporeal Membrane

Oxygenation). The product can be used to power a home ventilator (home CPAP) that does

Usage

3

not have to be continuously monitored by professionals. Please follow your doctor's instructions

and consult with the manufacturer for restrictions on the use of the equipment. If it is used

for general medical equipment, please be sure to monitor the power status to ensure that the

power does not run out.

19. When in use, power supply products will inevitably generate electromagnetic fields, which

are likely to affect the normal operation of medical implants or personal medical equipment

such as pacemakers, cochlear implants, hearing aids, debrillators etc. If these types of medical

equipment are being used, please contact the manufacturer to inquire about any restrictions on

the use of such equipment. These measures are fundamental to ensure a safe distance between

the medical implants (for example, pacemakers, cochlear implants, hearing aids, debrillators,

etc.) and this product while in use.

20. When the power supply is connected in the normal mode to a refrigerator, the power supply

may be automatically shut down due to the power uctuation property of the refrigerator. If

the refrigerator stores medicines, vaccines or other high-value items, it is highly recommended

that you set the AC output to "Never Turn Off" through the EcoFlow app when connecting the

power supply product to ensure a continuous power supply. Users should pay attention to the

power consumption of the power supply.

21. Do not put ngers or hands into the product.

22. To reduce risk of damage to the electric plug and cord, pull the plug rather than the cord when

disconnecting the power pack.

23. Do not operate the power pack with a damaged cord, plug or output cable.

24. To reduce the risk of electric shock, unplug the power pack form the outlet before attempting

any instructed servicing.

25. Have servicing performed by a qualied repair person using only identical replacement parts.

This will ensure that the safety of the product is maintained.

26. Do not use a battery pack or appliance that is damaged or modied. Damaged or modied

batteries may exhibit unpredictable behavior resulting in re, explosion or risk of injury.

27. Users should not to place the product on the oor, or at a height less than 457 mm (18 inches)

above the oor, when in a repair facility.

28. For long-term storage, please discharge the product every three months (rstly discharge it to

0%, then recharge it to 60%); the product will not be covered by the warranty if it is not charged

or discharged for more than 6 months.

Disposal Guide

1. Whenever possible, please completely discharge the battery of this product before placing

the product in the designated battery recycling bin. This product contains batteries.

Batteries are hazardous chemicals and should not be disposed of in ordinary trash cans.

For details, please follow local laws and regulations on battery recycling and disposal.

2. If the battery cannot be completely discharged due to the failure of the product itself,

please do not dispose of the battery directly in the battery recycling bin, and contact a

professional battery recycling company for further processing.

3. The battery will not start after over-discharge, please dispose of it.

4

EcoFlow App

What's in the Box

1. This product must be grounded. If it should malfunction or break down while charging,

grounding provides a path of least resistance for electric current to reduce the risk

of electric shock. This product is equipped with a power cord that has an equipment

grounding conductor and a grounding plug. The plug must be plugged into an outlet that is

properly installed and grounded in accordance with all local codes ordinances.

2. Improper connection of the equipment grounding conductor is able to result in a risk of

electric shock. Check with a qualied electrician if you are in doubt as to whether the

product is properly grounded. Do not modify the plug provided with the product – if it will

not t the outlet, have a proper outlet installed by a qualied electrician.

Grounding Instructions

SAVE THESE INSTRUCTIONS

Control, monitor and customize your EcoFlow RIVER 2 from

afar with the EcoFlow App.

User Manual &

Warranty Card

Car Charging

Cable

AC Charging

Cable

RIVER 2

5

Overview

Product Details

1. USB-C input/output port

4. DC output switch

7. AC output socket

2. Main power button

5. DC output socket

8. AC output switch

3. USB-A output port (×2)

6. LCD screen

9. X-Stream AC charging input port 10. Fan (do not block)

11. Car/Solar charging input port

6

LCD Screen

Refer to "Troubleshooting" for details.

1. Remaining battery percentage

2. Discharge/Recharge level limitation

3. Remaining charge/discharge time

4. Bluetooth connection

5. Wi-Fi connection

6. AC output

7. Fan

8. High temperature warning

9. Input power

10. Output power

11. Low temperature warning

12. Overload warning

7

Power On/Off

Charge Your Devices

Press the main power button once to turn on the product. The LCD screen lights up and the

main power indicator ashes white. Press and hold the main power button

(for about 3 seconds) to turn off the product, and the LCD screen.

The USB-A and USB-C output ports are automatically turned on once the product is turned on.

Press the "DC output switch" or "AC output switch" once to turn on their corresponding DC/AC

output sockets; press again to turn them off.

When using the AC output socket, make sure that the sum power of all loaded devices

is less than the rated power.

DC ON/OFF AC ON/OFF

1. After the product is turned on, press the main power button once to turn off the

LCD screen.

2. If the product is not used for 5 minutes, it will enter hibernation and the LCD screen

will turn off.

3. When RIVER 2 is charging, it can't be turned off by pressing and holding the main

power button unless the charging cable is unplugged rst.

Short press the

power switch

Short press the

power switch

Short press for power-on/

Long press for power-off

8

Charge RIVER 2

AC charging cable

X-Stream fast charging

360W Max

Fully charged in 1 hour

110W Max

Fully charged in

approximate 3 to 6 hours

1. For AC charging, we recommend that you use a power socket with a capacity of

more than 10A and ensure that the working current of the socket is constantly

greater than 10A.

2. For AC charging, please use the AC charging cable included in the package and plug

the cable directly into a wall outlet instead of an extension socket.

AC Charging (Grid Charging)

Solar Charging

1. The solar charging cable (MC4-XT60 adapter cable) and the solar panel are supplied

separately.

2. When using an EcoFlow solar panel to charge the product, connect them according

to the instructions in the user manual.

3. Before connecting the solar panel, ensure that the output voltage of the solar panel is

less than 30 V to avoid product damage.

Solar charging cable

Solar panel

+

9

You can recharge the product through the car power outlet. The product supports 12V/24V car

chargers and a maximum charging current of 8A.

To avoid failure to start due to insufcient car battery, use the car charger after the vehicle is

started. In addition, please make sure that the car charger cable is securely connected to the

cigarette lighter.

EcoFlow

takes no responsibilities for any loss or damage caused by failure to follow

instructions.

Car Charging

USB-C charging

60W Max

Fully charged in

approximate 5 hours

100W Max

Fully charged in

as fast as 3 hours

The USB-C charging cable (Type-C plug) and adapter are supplied separately.

Car charging cable

10

As a basic UPS feature, the EPS does not support 0ms switching. Please do not connect

the product to any device that requires 0ms UPS (such as data servers and workstations).

Please test and conrm the compatibility before using the product. We recommend that you

power only one device (with maximum power <600W) at a time and avoid using multiple

appliances at the same time to avoid triggering overload protection. EcoFlow takes no

responsibilities for any device failure or data loss caused by failure to follow instructions.

1. The X-Boost feature is not suitable for appliances with voltage protection (such as precise

instruments).

2. It is suitable for heating and motor-driven devices. Please conduct your own tests to check

whether your devices support X-Boost.

The product supports emergency power supply (EPS). When you connect the grid power to the

AC input port of the product through an AC cable, you can power electrical devices through the

AC output port (AC power will come from the grid instead of the power station in this situation).

In case of a sudden blackout, the product can automatically switch to the battery-powered

supply mode within 30ms.

Additional Features

X-Boost

EPS

The product supports X-Boost. It can power devices rated at up to 600W without incurring

operation failure due to overload protection. Observe the following tips when using the

X-Boost feature:

11

Troubleshooting

If a warning appears during the use of the product and the warning icon persists after

restart, please stop using the product immediately (do not attempt to charge or discharge

it). For problems not covered in the preceding table, please consult EcoFlow customer

service.

Indicator Problem Solution

Flashing Battery discharge

low temperature

Normal operation will resume

automatically when the

battery warms up.

Flashing Battery discharge

high temperature

Normal operation will resume

automatically after the

battery cools down.

Flashing Battery charging

low temperature

Normal operation will resume

automatically after the battery temperature

is restored to above 3°C.

Flashing Battery charging

high temperature

Normal operation will resume

automatically after the

battery cools down.

Flashing AC output

low temperature

Normal operation will resume

automatically when the

product warms up.

Flashing AC output

high temperature

Ensure that the air inlet and outlet of

the product are unobstructed. Normal

operation will resume automatically after

the temperature decreases.

Flashing USB-C or car

charging output

overload

Disconnect overloading devices and

restart the product to resume

normal operation.

Flashing AC output overload

Disconnect overloading devices

and restart the product to

resume normal operation.

The sum power of loaded electrical

appliances must not exceed the rated

power (for the power limit of electrical

appliances in X-Boost mode,

please refer to the X-Boost

feature introduction).

Flashing Charging overload Remove the charging cable and

normal operation will resume

automatically after restart.

Flashing Fan blocked Check whether the fan is blocked

by foreign objects.

Flashing Communication failure

between main

control board and AC

Normal operation will resume

automatically after restart.

12

Care and Maintenance

1. For safety, please do not store the product in temperature higher than 45°C (113°F) or

lower than -10°C (14°F) for a long time.

2. For long-term storage, please recharge the product every three months (rstly discharge

it to 0%, then recharge it to 60%). The product will not be covered by the warranty if it is

not charged or discharged for more than 6 months.

3. If the product has been idle for too long and the battery is severely low, it will enter a deep

sleep protection mode. In such case, please charge the product before using it again.

FAQ

1. What battery does the product use?

High-quality LFP battery.

2. What devices can the product's AC output socket power?

The rated power of the product is 300W and the peak power is 600W. With the X-Boost

feature, the product's AC output sockets can power devices rated at 600W or below.

We recommend that you conrm the power of devices before use, and ensure that the

sum power of all loaded devices is less than the rated power.

3. How do I know how long the product can charge my devices?

The charging time is shown on the product's LCD screen, which can be used to estimate

the charging time of most appliances with stable power usage.

4. How do I know if the product is charging?

During charging, the remaining charging time is shown on the LCD screen. Meanwhile,

the circle indicator around the remaining battery percentage rotates and the input power

is shown.

5. Can I take the product on a plane?

No.

6. Can I switch the frequency of the product?

We recommend that you do not switch the frequency in most cases. If you need to switch the

AC frequency due to special circumstances, please turn on the AC power, and then press and

hold the AC output switch for 10 seconds or use the app to switch frequency.

ECOFLOW RIVER2

Manuel d’utilisation V1.0

Clause de non-responsabilité

Les utilisateurs sont tenus de lire attentivement ce manuel d'utilisation et de s'assurer qu'ils

ont bien compris son contenu avant d'utiliser ce produit. Conservez ce manuel d'utilisation

pour vous y référer en cas de besoin. Toute utilisation incorrecte peut causer des blessures

graves pour l'utilisateur ou d'autres personnes, endommager le produit ou entraîner des pertes

matérielles. Il est considéré que si l'utilisateur utilise ce produit, il comprend, reconnaît et

accepte l'ensemble des termes et contenus du manuel d'utilisation et est responsable de toute

utilisation incorrecte et de toutes les conséquences qui en découlent. Par la présente, EcoFlow

décline toute responsabilité en cas de pertes dues à une utilisation du produit non-conforme au

manuel d'utilisation par l'utilisateur.

Sous réserve du respect des lois et réglementations, notre entreprise a le droit nal d'interpréter

ce document et tous les documents relatifs à ce produit. Toute mise à jour, révision ou

résiliation du contenu de celui-ci, le cas échéant, sera effectuée sans préavis et les utilisateurs

devront consulter le site ofciel d'EcoFlow pour obtenir les dernières informations concernant

le produit.

Contenu

Caractéristiques

Consignes de sécurité

Application EcoFlow

Détails du produit

Mise sous/hors tension

Charge de vos appareils

Charge de la station RIVER 2

Contenu de la boîte

Présentation

Écran LCD

Charge CA (charge du réseau)

Charge solaire

Charge de voiture

Charge USB-C

FAQ

Caractéristiques supplémentaires

Dépannage

Entretien et maintenance

X-Boost

Alimentation électrique de secours

1

2

4

5

4

6

7

8

9

10

11

12

1

Spécications

Informations générales

Poids Environ 3,5 kg(7.8lbs)

Dimensions 245*215*145 mm(9.6 x 8.5 x 5.7inches)

Capacité 256 Wh (20 Ah 12,8 V )

Wi-Fi(2.4G)

Gamme de fréquences :

20M: 2412-2462MHz/40M: 2422-2452MHz

Puissance de sortie maximale: 0.071W

Bluetooth Gamme de fréquences : 2402-2480MHz

Puissance de sortie maximale : 0.005W

Modèle EFR600

Spécifications d’entrée

Tension d’entrée CA 100V-120V~50Hz/60Hz, 8A Max

Entrée de charge de voiture 12 V/24 V 8 A, 100 W max.

Entrée de charge solaire 11-30 V 8 A, 110 W max.

Entrée USB-C 5/9/12/15/20 V 3 A, 60 W max.

Spécifications de sortie

Sortie USB-C 5/9/12/15/20 V 3 A, 60 W max.

Sortie USB-A 5 V 2,4 A 12 W max. par port

Sortie de chargeur de voiture 12,6 V 8 A, 100 W max.

Sortie CA Onde sinusoïdale pure, total 300 W (pic à 600 W)

120V~50Hz/60Hz*

Spécifications de la batterie

Matériau de la batterie Batterie lithium au phosphate de fer

Cycle de vie Après 3000 cycles, la capacité restante est

toujours supérieure à 80 %

Température de fonctionnement

Température ambiante optimale pour le

fonctionnement 20℃ - 30℃

Température ambiante pour la décharge -10℃ - 45℃

Température ambiante pour la charge 0℃ - 45℃

Température ambiante pour le stockage -10℃ - 45℃ (optimal: 20℃ - 30℃)

Ne pas modier la fréquence de sortie CA de façon intempestive, sans quoi certains appareils

électriques pourraient être inutilisables.

ページを読み込んでいます...

EcoFlow RIVER 2 ユーザーガイド

EcoFlow RIVER 2 ユーザーガイド

他の言語で

関連論文

その他の書類