![](//vs1.manuzoid.jp/store/data-gzf/555161033a3a4d1bf21e5623d407be01/2/000148610.htmlex.zip/bgd.jpg)
Pull out the crown to the second click
to stop the watch when the second
hand is at the 0 second position.
Turn the crown clockwise until the
desired date appears. When the date
changes, the time is a.m. Further turn
the crown to set the current time.
Push the crown back in to the normal
position in accordance with a time
signal. The watch starts operating.
It is necessary to adjust the date after February (which has 28 days, 29 days in
a leap year) and a 30 day month.
(Ex.) On the first day of a 30 day month, "31" is
displayed. Pull out the crown to the first
click. Turn the crown clockwise to set the
date to "1," and push the crown back in to
the normal position.
9594
Pull out the 2 o'clock position crown to the first click. Turn the crown to
adjust the time zone, and set the hour hand to the 12 o'clock position.
Push the 2 o'clock position crown back to its normal position.
Pull out the 3 o'clock position crown to the first click.
Turn the 3 o'clock position crown clockwise to adjust the day. Then turn
the crown counterclockwise to adjust the date.
When the second hand reaches the 12
o'clock position, pull out the 3 o'clock
position crown to the second click (the
secon hand will stop).
The date changed once every 24 hours at around 12 o'clock a.m. Therefore, if
the a.m./p.m. is incorrectly set, the date will change around 12 o'clock p.m.
Make sure that the watch is operating.
Pull out the 3 o'clock position crown to the
second click. Turn the crown to set the
24-hour hand and the minute hand to the 12
o'clock position.
Push the 3 o'clock position crown back to its
normal position.
9796
Push the crown back in to the normal position in accordance with a time
signal. The watch starts operating.
It is necessary to adjust the date after February (which has 28 days, 29 days in
a leap year) and a 30 day month.
(Ex.) On the first day of a 30 day month, "31" is
displayed. Pull out the crown to the first
click. Turn the crown clockwise to set the
date to "1," and push the crown back in to
the normal position.
9998
This caliber is equipped with a "time zone adjustment mechanism." By using
the 2 o'clock position crown, the hour hand can be independently adjusted in
one-hour increments.
This eliminates the trouble of stopping the watch to adjust the time when you
travel abroad. In addition, by using the 24-hour hand (GMT hand) at the center
of the watch, the watch can be used as a dual time watch that shows home time
and local time.
While the date can be adjusted by turning the hour hand for the "time zone
adjustment mechanism", the date and day can be also adjusted independently
by using the 3 o'clock position
crown.
Check that the 3 o'clock
position crown is at its
normal position. Then pull
out the 2 o'clock position
crown to the first click.
Turn the 2 o'clock position
crown to set the time of
your destination.
On completing the adjust-
ment of the 24-hour hand,
push the 2 o'clock position
crown bak to its normal
position.
101100