![](//vs1.manuzoid.jp/store/data-gzf/5ef39d1578c473a60f89fbb2f336d2f4/2/000193747.htmlex.zip/bg1.jpg)
注册您的产品并在以下网站链接中了解详情
HR2006
www.philips.com/welcome
技术规格如有变更,恕不另行通知
© 2013 Koninklijke Philips Electronics N.V.
保留所有权利
HR2006_China_Safety_V1.0
3140 035 34451
English
1 Important
Read this Important Information leaet carefully before you use the blender and save it for
future reference.
General
Danger
• Never immerse the motor unit in water or any other liquid, nor rinse it under the tap.
Use only a moist cloth to clean the motor unit.
Warning
• Check if the voltage indicated on the appliance corresponds to the local mains voltage
before your connect the appliance.
• If the mains cord is damaged, you must have it replace by Philips, a service center
authorized by Philips, or similarly qualied person to avoid a hazard.
• Do not use the appliance if the plug, the mains cord or other parts are damaged.
• Never use the blender jar or mill beaker to switch the appliance on and off.
• Never let the appliance run unattended.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not touch the blades, especially when the appliance is plugged in. The blades are very
sharp.
Caution
• Always unplug the appliance before you assemble, disassemble or make adjustments to
any of the parts.
• Never use any accessories or parts from other manufacturers or that Philips does not
specically recommend. If you use such accessories or parts, your guarantee becomes invalid.
• Do not exceed the maximum indication on the blender jar or the beaker.
• Do not exceed the maximum quantities and processing times indicated in the relevant table.
• The appliance can only be switched on if the blender jar or the beaker is assembled on
the motor unit correctly.
Blender
Warning
• Never reach into the blender jar with your ngers or an object while the appliance is running.
• Do not touch the cutting edges of the blade unit when you clean it. They are very sharp
and you could easily cut your ngers on them.
• Make sure the blade unit is securely fastened to the blender jar before you assemble the
blender jar onto the motor unit.
• If the blades get stuck, unplug the appliance before you remove the ingredients that block
the blades.
Caution
• Never ll the blender jar with ingredients hotter than 80ºC.
• To prevent spillage, do not put more than 1.25 liters of liquid in the blender jar, especially
when you process at a high speed. Do not put more than 1 liter in the blender jar when
you process hot liquids or ingredients that tend to foam.
• Do not let the appliance run for more than 2 minutes at a time. Let it cool down to room
temperature between processing cycles.
• Always make sure the lid is properly closed and the measuring cup is inserted properly in
the lid before you switch on the appliance.
Mill
Warning
• Make sure the blade unit is securely fastened to the mill beaker before you assemble the
beaker onto the motor unit.
• Do not touch the cutting edges of the mill blade unit when you handle or clean it. They
are very sharp and you could easily cut your ngers on them.
• If the blade unit gets stuck, unplug the appliance before you remove the ingredients that
block the blades.
• Never use the mill to grind very hard ingredients such as nutmeg, Chinese rock sugar and
ice cubes.
Caution
• Never use the mill for more than 30 seconds without interruption. Let it cool down to
room temperature between processing cycles.
• Never forget to place the sealing ring in the blade unit before you assemble the mill
beaker, otherwise leakage occurs.
• Always process cloves, star anise and aniseed together with other ingredients. If processed
separately, these ingredients may attack the plastic materials of the mill.
• The mill beakers may become discoloured when you use them to process ingredients
such as cloves, anise and cinnamon.
• The mill is not suitable for chopping raw meat. Use the blender instead.
• Do not use the mill to process liquids such as fruit juice.
EN Importantinformationleaet
ZH-CN 重要信息手册