Escene ES270-P Quick operation guide

カテゴリー
ルーター
タイプ
Quick operation guide

このマニュアルも適しています

ES270
桌面型话机快速操作指南
1 状态灯
线路 1 状态
描述
橙色常
空闲状态下有未接/前转/DND/留言/静音/未注册等
2 线路键状
线路 1/2 灯状
描述
红色闪烁
对应线路来电/对应线路保持中
红色常亮
摘机/拨号/对应线路通话中
无亮灯
对应线路空闲状态
列表
数量
话机
1
手柄
1
网线
1
快速操作指
1
支架
1
1-1
安装支架:将支架的卡扣对准支架板下面两个卡口后,手托住支架向上轻轻
一下即可.(如上图)
PC 口接电脑,LAN 口接外网, 接电源, RJ9 耳麦,
接话机手柄。
步骤为:按话机上软按菜单=> 系统设置=> 高级设置=>输入级设
=> =>LAN => DHCP/
IP/PPPoE)=>进入=>保存=>确定(重启生效)
有以下选项:静态 IP、拨号 PPPoEDHCP 自动获取
选择静态 IP 后按导航键-下看到 IP 地址设置,可对 IP 及网关等网
络信息进行设置,其中“.”请用键“*”输入,修改完后确定。
选择 PPPoE 输入账号和密码后按存=>确定(重启生效)
选择 DHCP 不用设置 IP。
1-2
=> => =>
(默认为空=> Sip 帐号=>账号 X(X-1,2)之后分别配置以下帐
号参数:帐号激活状态、标签、显示名、认证用户名、注册名、密码、
SIP 服务器等
SIP 域名输入 SIP 服务器 IP(“.”请用键*输入,注意 IP 话机
SIP 服务器间网络必须可达),之后选取“保存,即可完成 SIP
账户的添加。
您可以摘机或按下免提键或耳麦键来进行一个呼叫。
直接呼叫:按下免提者摘下接拨打号码,然后按#
软键;
重拨重拨出所已拨,可有选择的需要
拨出的号码;
从呼叫记录进行呼叫: 直接按话单或者在待机状态下按“下导航
键”调出未接来电”也可按左右导航键去选择全部记录
接号或““前选择一个,再
按“拨号软键进行呼叫。
实现来电前转、通话转移;
来电来电铃时下前转同出需转移的目码,
本机直接挂机
咨询在通按下听到号音时拨打需转移
的目号码,等方振并接起来后再“转可实
转移。
*更多的详细内容以及话机配置信息请参考本话机的用户手册。您也可以
通过访问话机 Web 页面来进行更详细的参数配置,在话机空闲时 C
键查看话机的 IP 址,在电脑的浏览器中输 IP 话机的地址,输入话机
的用户名、密码(默认均 root)可进入了 IP 话机的网页配置界面。
广州市亿景通信技术有限公
地址:广州市天河区东圃镇黄村路 51 号粤安工业园 C 4
网址:http://www.escene.cn
客户服务:4000502010
1-3
ES270 DeskPhone
Quick User Guide
Table 1 Light-strip
Line 1 Status
Description
Yellow
steady
Under the idle status, the light will on when:
Missed Call, Transfer, DND, Message, Mute,
SIP-Unregistered.
Table 2 Line keys
Description
Incoming call;On hold
Pick up;On communication
Idle
Amount
1
1
1
1
1
2-1
PC Port for Computer connection, LAN Port for Internet connection,
connected power adapter, connected headset, connected
handset.
Press the menu soft key on the phone MENU=> System setting=>
Advanced setting=>Enter Advanced Password (Empty by
default) => Network => Enter LAN Port
Type has the following options : STATICPPPoEDHCP
Select STATIC and press Navigation key to see the IP address
settings and set the IP and gateway and other related network
information, including "." Use the key "*" entry.
Select PPPoE and insert username and password to register.
Select DHCP without setting IP.
NOTE: After changing the configuration, reboot for application.
2-2
Under the idle status, you can start to configure account by
pressing MENU soft key => System Setting => Advanced
Setting=>type Advanced password (it is idle by default) => SIP
Account, the main parameters for 2 SIP accounts are needed to
be set as follow:
Enable Account: Select Enable
Account: Insert your SIP account
Authen User: The authentication with the account
User PwdInsert your SIP password
SIP ServerInsert the SIP server IP address (you can insert “.” by
“*” key, you must confirm the connection between the phone and SIP
server), And then select Submit changes and press OK to submit the
changes.
You can pick up the handset or press Speaker/Headset key to place a
call.
Dial directly: Dial number directly, then press # key or press
soft-key (It will call from the first available line);
Redial: Press Redial key/soft-key to dial the latest number;
Dial from Call history: Press Menu key, select “Call history and
select one of “Missed calls”, “Received calls” and “Dialed numbers”
lists to dial by pressing Dial soft-key.
You can open Call history under idle status of phone by pressing
corresponding Soft key-Dir or Down key under the idle. And then you
can through the navigation key to select, Received Calls list, Missed
Calls list, Dialed Calls list, "Forwarded Calls" list and "All Calls" list.
*This document introduces main function operation of IP phones only.
For details (operation and configuration), refer to User Manual. And
set details on the web page of phone. In the browser, input the IP
phone's address and the phone's user name and password (default is
root), and then login into the IP phone's web configuration interface.
ESCENE COMMUNICATION CO.,LTD.
Web: http://www.escene.cn/en
Address: Floor 4 Building C YueAn Industrial Park No.51 Huangcun Road
Tianhe District Guangzhou China
2-3
  • Page 1 1
  • Page 2 2

Escene ES270-P Quick operation guide

カテゴリー
ルーター
タイプ
Quick operation guide
このマニュアルも適しています

他の言語で