LED Status Description
Red, flashing There is an incoming call.
Red, steady Hook-off. enter a usual conversation
Yellow-green, flashing Holding call.
Yellow-green, steady Active call.
Table 2 Programmable Buttons
LED Status Description
Red, steady Remote line is busy. (BLF enable)
Yellow-green, steady Remote line is idle. (BLF enable)
Dark BLF disable.
Buttons Description
Headset, Mute,
Speaker
The corresponding function is enabled.
2-1
PC port to PC, LAN port access outside the network, EXT Socket
Extension units, Upper right to power, the right of access RJ11
headset, the lower right of access a handset.
WS 3XX of the LAN Ethernet port is prohibited to use, plug this
interface may cause the loop.
The USB port in the phone of left side, only support DC 5V power
Steps: Press the menu button on the phone MENU=> System
setting=> Advanced setting=>Enter Advanced Password
(Empty by default) by pressing OK => Network => click OK
TYPE has the following options : STATIC、PPPOE、DHCP
Choose STATIC press Navigation key - to the next, see the IP
address settings, the IP and gateway settings and other related
network information, including "." Use the key "*" entry.
Select PPPoE username and password to register.
Select DHCP needn’t to setting IP.
* WS 3xx if there is wireless AP in surrounding environment, you can
choose the System setting -> WIFI setting-> hot list, choose a hot
in ,set the SSID password (no password is not set)
Specific steps: Press SSID => key => password, w if the wireless
encryption type is different, choose Security type, press OK to select.
After setting, remember to press Submit.
On the phone, press MENU button => System Setting =>
Advanced Setting=>type Advanced password (it is idle by
default) and press OK button=> SIP=> Accounts SIP =>Account
1,and then set the parameter as follow: Enable Account: Select
Enable,
2-2
Username
:
Type your SIP account,
User Pwd
:
Type your SIP password,
SIP1
:
Type the IP address of your SIP server (you can type “.” by “*” button
,
you must confirm the connection between the phone and SIP server)
,
And
then select Submit changes
,
and press OK button to submit the changes.
You can pick up the handset or press Headset/Speaker button to place a call.
Dial directly: Dial number directly, then press # button or Send soft-key (it
will call from the first available line);
Redial: Press Redial button/soft-key to dial the latest number;
Dial from Call history: Press Menu button, select “Call history” and select
one of “Missed calls”, “Received calls” and “Dialed numbers” lists to dial
by pressing Dial soft-key.
You can open Call history in standby status of phone by pressing
corresponding Navigation-buttons, for example , Left button : “Received
Calls” list ; Right button : “Dialed Numbers” list ; Down button : “Missed
Calls” list . UP button :"tone volume" ;"OK" button to confirm the key ; next
to the "C" key for the Cancel button.
*This document introduces normal function operation of IP phones only. For
details (operation and configuration), refer to User Manual. And set details on
the web page of phone. In the browser, enter the IP phone's address, enter the
phone's user name and password (the default are root), enter the IP phone's
web configuration interface.
* ES \ DS \ WS other 3xx model 132X64
ES330 has three VoIP accounts and line keys.
ESCENE COMMUNICATION CO.,LTD.
Web: http://www.escene.cn/en
Address: Floor 4 Building C YueAn Industrial Park No.51 Huangcun Road
Tianhe District Guangzhou China
2-3