dji Aeroscope ユーザーマニュアル

タイプ
ユーザーマニュアル
2018.09
Aeroscope
AS-F1800
V1.6
User Manual
©
2018 DJI All Rights Reserved.
1
Contents
Disclaimer and Warning
2
Product Prole
2
Introduction 2
In the Box 2
Overview 3
Indicators 4
Function Descriptions
5
Basic Functions 5
Features 6
Operation and Maintenance 6
Specications
7
8
8
8
8
9
10
11
11
11
12
13
EN
JP
Compliance Notice
14
2
©
2018 DJI All Rights Reserved.
Disclaimer and Warning
Congratulations on purchasing your new DJI
TM
product. The information in this document
affects your safety and your legal rights and responsibilities. Read this entire document
carefully to ensure proper conguration before use. Failure to read and follow instructions and
warnings in this document may result in serious injury to yourself or others, damage to your
DJI product, or damage to other objects in the vicinity. This document and all other collateral
documents are subject to change at the sole discretion of DJI.
By using this product, you hereby signify that you have read this disclaimer and warning
carefully and that you understand and agree to abide by the terms and conditions herein. You
agree that you are solely responsible for your own conduct while using this product, and for
any consequences thereof. You agree to use this product only for purposes that are proper
and in accordance with all applicable laws, rules, and regulations, and all terms, precautions,
practices, policies and guidelines DJI has made and may make available.
DJI accepts no liability for damage, injury or any legal responsibility incurred directly or
indirectly from the use of this product. The user shall observe safe and lawful practices
including, but not limited to, those set forth in this document. Notwithstanding above, your
statutory rights under applicable national legislation are not affected by this disclaimer.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its afliated
companies. Names of products, brands, etc., appearing in this document are trademarks
or registered trademarks of their respective owner companies. This product and document
are copyrighted by DJI with all rights reserved. No part of this product or document shall be
reproduced in any form without prior written consent of or authorization from DJI.
Product Prole
Introduction
AEROSCOPE
TM
detects UAVs flying within a particular surveillance area. Aeroscope
receives UAV broadcast information of various formats, and then sends the information to
the data processing platform via Ethernet or a 2G, 3G, or 4G wireless network card. The
receiver and antenna can be congured in a number of different ways. Also, Aeroscope has
integrated GPS, so users can see where the unit is on a map. And it offers BIST (built-in self-
testing) functionality for regularly timed self-tests and remote self-tests, as well as accurate
environmental spectrum detection.
* Aeroscope should be used with the DJI Background Management System (sold separately).
In the Box
Aeroscope Processor ×1
Dongle** ×1
Power Cable ×1
Processor Mounting Bracket A ×2
Processor Mounting Bracket B ×2
Aeroscope AS-F1800
©
2018 DJI All Rights Reserved.
3
1
1 1
234
5
8
6
7
1. Antenna Ports
Connected to the antennas with the
antenna cables.
2. Power Port
Connected to a 220V AC power outlet.
3. USB Port
Connected to a wireless network card
or a monitor.
4. Ethernet Port
Connected to a computer.
5. CAN Extension Port
Used for system debugging.
6. UART Extension Port
Used for system debugging.
7. Indicators
Six LEDs that indicate the status of each
module.
8. GND Connector
Connected to the metal bracket of the
mounting device.
Processor GND Cable ×1
Pin ×5
Female Power Connector ×1
RJ45 Connector ×1
RJ45 Waterproof Case ×1
Screw Set ×1
Screw M8 ×100
Screw Nut M80
Washer M80
Screw M6 ×18
** Only the waterproof dongle case is included in the North American version. The actual
dongle must be purchased separately.
Overview
Aeroscope AS-F1800
4
©
2018 DJI All Rights Reserved.
Indicators
LED1: Processor module status indicator
LED2: Network connection status indicator
LED3: UAV information capture indicator
LED4: Type 3 receiver status indicator
LED5: Type 2 receiver status indicator
LED6: Type 1 receiver status indicator
LED1: Processor module status indicator
It is used to indicate the processor’s working status.
Indicator Description
Green blinking Functioning normally or rmware updated successfully.
Yellow blinking Checking consistency when powered on or updating rmware.
Red blinking Firmware update failed.
Solid on/off Functioning abnormally.
LED2: Network connection status indicator
It is used to indicate the connection status between the processor and server.
Indicator Description
Solid green Connected normally and communicating with the monitor.
Solid red Disconnected from the monitor.
LED3: UAV information capture indicator
When the Aeroscope receives UAV information, it can indicate the number of UAVs in the
area.***
Indicator Description
Green blinking
UAV detected, green LED blinking indicates UAV information
reception.
Off No UAV information received.
*** The UAV number is the reported number from the background. The same UAV serial
number in a short time is regarded as one.
LED1
LED2
LED3
LED4
LED5
LED6
Aeroscope AS-F1800
©
2018 DJI All Rights Reserved.
5
LED4: Type 3 receiver status indicator
Indicator Description
Solid green Functioning normally.
Solid red Functioning abnormally.
LED5: Type 2 receiver status indicator
Indicator Description
Solid green Functioning normally.
Solid red Functioning abnormally.
LED6: Type 1 receiver status indicator
Indicator Description
Solid green Functioning normally.
Solid red Functioning abnormally.
Function Descriptions
Basic Functions
Functions Descriptions
UAV detection
Aeroscope detects UAVs ying within a given area and obtains
each aircraft’s broadcast GPS coordinates, ight altitude,
speed, orientation, model, serial number, and Home Point.
Then Aeroscope sends this information to the remote server for
processing and to the display in real-time.
Simple installation The processor and antennas can be easily installed onto the rod.
Support aircraft
PHANTOM
TM
series
INSPIRE
TM
series
MAVIC
TM
SPARK
TM
GPS Aeroscope can detect its current position using its built-in GPS.
Remote OAM
A variety of OAM features are available when used with the
remote server, including rmware updating, resetting, status
inquiry, self-testing, parameter conguration, and more.
Environmental spectrum
detection
Aeroscope can scan for environmental interference and provide
a reference for installation.
Data security
Use certicate management and data encryption between the
equipment and remote server to ensure data reliability and
security.
Aeroscope AS-F1800
6
©
2018 DJI All Rights Reserved.
Features
Features Descriptions
Long-range detection
In an interference-free environment, signal reception range
may be vary when different antennas are used. When using
the omnidirectional antenna (3dBi), signal reception range can
reach:
Over 7 km for Mavic
Over 5 km for Phantom series
Over 3 km for Spark
The signal reception range is about twice as much as the
omnidirectional antenna when using the low-gain directional
antenna (8dBi) and about four times when using the high-gain
directional antenna (16dBi).
Quick detection
Aeroscope needs less than two seconds to detect an aircraft
and less than ve seconds for real-time display via the remote
server.
Easy installation Aeroscope can be installed and congured within half an hour.
Support for multiple
antennas
According to the environment and applications, users
can select appropriate antennas to meet their coverage
requirements.
Various data feedback
modes
Both Ethernet and 2G/3G/4G wireless networks are supported.
Easy OAM capabilities
You can update rmware, reset to factory defaults, check
system status, conduct self-testing, adjust settings, and more
with the remote server and local app.
Error management
The device will reset when a recoverable software error
appears, and it will send a failure warning when there is an
unrecoverable software error or hardware error.
Operation and Maintenance
Modes Descriptions
Online (Remote server)
Device management: All equipment status inquiries,
setting conguration, resetting, self-testing, and so on with
authorization.
Software management: Firmware updating and version
management with authorization.
Environment monitoring: Monitor electromagnetic interference
to support equipment deployment and maintenance.
Data record management: Review data history within a
particular length of time with authorization.
Local (Assistant) Similar to online mode. But it can be used on one device.
©
2018 DJI All Rights Reserved.
7
Specications
Safety and Standards
Model AS-F1800
Ingress Protection Rating IP65
Lightning Rating IEC61000-4-5 6KV
Electromagnetic
Compatibility
This equipment meets electromagnetic compatibility
requirements and also meets below criteria:
Europe:
EN 55032: 2015
EN 55024: 2010+A1:2015
EN 61000-3-2: 2014
EN 61000-3-3: 2013
United States:
47 CFR Part 15, Subpart B:2016
Electrical Specications
Power Consumption **** Approx. 70W
Input 100-240 V~, 50/60 Hz, 2.5 A Max.
Working Environment
Operating Temperature
-30°C to +50°C (without solar radiation)
-30°C to +45°C (with solar radiation)
Relative Humidity 5% to 100%
Absolute Humidity 1 g/m
3
to 30 g/m
3
Atmospheric Pressure 70 kPa to 106 kPa
Physical Specications
Dimensions (HxWxD) 310 mm × 260 mm × 100 mm
Weight 6.8 kg
Support Aircraft
Phantom series
Inspire series
Mavic
Spark
**** Test temperature is the room temperature of 25 ° C.
8
©
2018 DJI All Rights Reserved.
DJI™
DJI
DJI
DJI
DJI
DJI SZ DJI TECHNOLOGY CO., LTD. DJI
DJI DJI
AEROSCOPE
TM
UAV Aeroscope
UAV 2G 3G 4G
Aeroscope GPS
BIST
* Aeroscope DJI Background Management System
Aeroscope 1
1
1
A 2
B 2
GND 1
5
1
RJ45 1
RJ45 1
1
M8 100 M80 M80 M6 18
Aeroscope AS-F1800
©
2018 DJI All Rights Reserved.
9
1
1 1
234
5
8
6
7
1.
2.
220V AC
3.USB
4.
5.CAN
6.UART
7.
6 LED
8.GND
Aeroscope AS-F1800
10
©
2018 DJI All Rights Reserved.
LED1
LED2
LED3 UAV
LED4 3
LED5 2
LED6 1
LED1
LED2
LED3 UAV
Aeroscope UAV UAV *
UAV LED UAV **
UAV
* UAV UAV 1
LED4 3
LED1
LED2
LED3
LED4
LED5
LED6
Aeroscope AS-F1800
©
2018 DJI All Rights Reserved.
11
LED5 2
LED6 1
UAV
Aeroscope UAV
GPS
Aeroscope
PHANTOM
TM
INSPIRE
TM
MAVIC
TM
SPARK
TM
GPS Aeroscope GPS
OAM
OAM
Aeroscope
Aeroscope AS-F1800
12
©
2018 DJI All Rights Reserved.
3dBi
Mavic 7km
Phantom 5km
Spark 3km
8dBi
2 16dBi 4
Aeroscope 2 5
Aeroscope 30
2G 3G 4G
OAM
1
©
2018 DJI All Rights Reserved.
13
AS-F1800
IP65
IEC61000-4-5 6KV
EN 55032: 2015
EN 55024: 2010+A1:2015
EN 61000-3-2: 2014
EN 61000-3-3: 2013
47 CFR Part 15, Subpart B:2016
*** 70W
100-240 V~, 50/60 Hz, 2.5 A Max.
-30 +50 C
-30 +45 C
5 100%
1 30g/m
3
70 106kPa
x x 310mm 260mm 100mm
6.8kg
Phantom
Inspire
Mavic
Spark
*** 25
14
©
2018 DJI All Rights Reserved.
Compliance Notice
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device is in compliance with the
essential requirements and other relevant provisions of the Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance
EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Declaración de cumplimiento UE: SZ DJI TECHNOLOGY CO., LTD. por la presente declara que este dispositivo cumple los
requisitos básicos y el resto de provisiones relevantes de la Directiva 2014/53/EU.
Hay disponible online una copia de la Declaración de conformidad UE en www.dji.com/euro-compliance
Dirección de contacto de la UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
EU-verklaring van overeenstemming: SZ DJI TECHNOLOGY CO., LTD. verklaart hierbij dat dit apparaat voldoet aan de
essentiële vereisten en andere relevante bepalingen van Richtlijn 2014/53/EU.
De EU-verklaring van overeenstemming is online beschikbaar op www.dji.com/euro-compliance
Contactadres EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Declaração de conformidade da UE: A SZ DJI TECHNOLOGY CO., LTD. declara, através deste documento, que este
dispositivo está em conformidade com os requisitos essenciais e outras disposições relevantes da Diretiva 2014/53/EU.
Existe uma cópia da Declaração de conformidade da UE disponível online em www.dji.com/euro-compliance
Endereço de contacto na UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Dichiarazione di conformità UE: SZ DJI TECHNOLOGY CO., LTD. dichiara che il presente dispositivo è conforme ai requisiti
essenziali e alle altre disposizioni rilevanti della direttiva 2014/53/EU.
Una copia della dichiarazione di conformità UE è disponibile online all'indirizzo Web www.dji.com/euro-compliance
Indirizzo di contatto UE: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
Déclaration de conformité UE: Par la présente, SZ DJI TECHNOLOGY CO., LTD déclare que cet appareil est conforme aux
principales exigences et autres clauses pertinentes de la directive européenne 2014/53/EU.
Une copie de la déclaration de conformité UE est disponible sur le site www.dji.com/euro-compliance
Adresse de contact pour l'UE : DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
EU-Compliance: Hiermit erklärt SZ DJI TECHNOLOGY CO., LTD., dass dieses Gerät den wesentlichen Anforderungen und
anderen einschlägigen Bestimmungen der EU-Richtlinie 2014/53/EU entspricht.
Eine Kopie der EU-Konformitätserklärung nden Sie online auf www.dji.com/euro-compliance.
Kontaktadresse innerhalb der EU: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS
Equipment intended only for installation in a RESTRICTED ACCESS LOCATION.
For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall be easily accessible.
YC.BZ.SS000200.06
Printed in China.
This content is subject to change.
Download the latest version from
https://www.dji.com/aeroscope
If you have any questions about this document, please
contact DJI by sending a message to
.
Copyright © 2018 DJI All Rights Reserved.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

dji Aeroscope ユーザーマニュアル

タイプ
ユーザーマニュアル

他の言語で