10
OSD SET
LANGUAGE: Select your desired language from the OSD menu.
OSD H.POS.: Adjust the OSD menu horizontal position.
OSD V.POS.: Adjust the OSD menu vertical position .
OSD TIMER: Adjust the OSD display time.
TRANSPARENCY: Adjust the transparency of the OSD menu.
OSD SETTING
LANGUAGE
OSD H.POS.
OSD V.POS.
OSD TIMER
TRANSPARENCY 0
50
50
10
Press“MENU”key to show the main menu,then press
“LEFT/RIGHT”key to choose Image Menu
RESET
IMAGE AUTO ADJUST: Press to adjust the position of the picture
automatically.
COLOR AUTO ADJUST: Press to adjust the color of the picture
automatically.
RESET: Press to restore factory settings.
AUTO POWERDOWN : Open or close the auto powerdown.
Press“MENU”key to show the main menu,then press
“LEFT/RIGHT”key to choose Image Menu
RESET
IMAGE AUTO ADJUST
COLOR AUTO ADJUST
RESET
AUTO POWERDOWN OFF
HDR MODE AUTO
HDR MODE : Select the HDR function working mode.
SIGNAL SOURCE: Select your desired input source among auto,
HDMI 1 and HDMI 2.
VOLUME: Adjust the volume of the monitor.
FREE SYNC: Open or close the free Sync function.
MISC.
SIGNAL SOURCE
LOW BLUE LIGHT
VOLUME
FREESYNC
OD
0
OFF
50
HDMI 1
OFF
1920 x 1080 60HZ
LOW BLUE:Select the blue light of the picture among week,
medium, strong and strongest.
OD: Open or close the over drive of the monitor among.
OTHERS Press“MENU”key to show the main menu,then press
“LEFT/RIGHT”key to choose Image Menu
Note:
1. According to different input signals, the available functions maybe not the same.
2. Some items are disabled in gray when they are unavailable in a certain mode. Those items are enabled
when corresponding modes are activated.
OSD MENU