Specifications
Headphone Cables
Thick 7N-OFC cables are exclusively
manufactured for the TH900 that
enhances low frequency reproduction.
The plug case is made of duralumin
that promises high durability.
Ear Pads
The TH900 uses protein leather. This
highly comfortable ear pad material is
made of Eggshell membrane and
successfully achieved a weight reduc-
tion of approx. 60% compared to genu-
ine leather.
Headphone Drivers
Magnetic Circuit: Magnetic repulsion
system using neodymium magnet
The magnetic repulsion system gives
the TH900 high sensitivity with wide
dynamic range.
Diaphragm: BIODYNA
Foster developed the diaphragm "BIO-
DYNA" for headphone application by
using bio-technology. BIODYNA
diaphragm is made by Bio-cellulose
and high performance inorganic fiber
admixture. The bio-cellulose is gener-
ated by acetobacter. It has extremely
fine fiber and high purity comparing to
the plant fiber cellulose. As a result,
use of BIODYNA diaphragm achieves
the high quality sound maintaining
good balance within the all frequency
bands. It also gives advantage of sound
resolution at high frequency.
2.
3.
4.
As the housings are made of wood,
they are more susceptive to mechanical
shock.
Please ensure to protect the
headphones from any physical impacts,
high temperature and humidity.
The housings are processed by the
artisans piece by piece. Please accept
that the details of finish such as color
and print pattern are varied slightly.
Design and specifications are subject
to change without notice.
Avoid extended use at high volume
levels as your hearing may be perma-
nently impaired.
You are advised never to use
headphones in situations such as
driving and cycling as your ability to
react to emergencies and your environ-
ment will be considerably reduced.
*
*
*
*
*
*
Caution
Type
Unit
Impedance
Sensitivity
Maximum input
Reproduce frequency
Weight
HP cord
HP plug
Accessory
Dynamic
400 g (excluding HP cord)
3 m Y type 7N-OFC cord
ø 6.3 mm gold coating stereo phone plug
HP stand
L R
A silver ring is attached to the arrowed
section indicating the R (right) side
housing. No ring is attached to the L
(left) side housing.
*