LED Controller
Introduction
Umi Smart Wireless
1. Power supply input
The controller supply voltage range is from DC 5V to
24V. The white power cable should be connected to power
positive and gray to negative (For other cable color,
please refer to the labels). The LED output voltage is at
same level as the power voltage, please make sure the
power supply voltage is correct and the power rating is
capable for the load.
2. LED output
Connect constant voltage LED loads to these cables.
Please make sure the LED rated voltage is same as the
power supply and each channel’s maximum load current is
in range of the controller rated current.
Please refer to following output wiring diagram for
different models:
CAUTION! The controller will be permanently
damaged if output cables short circuit. Please make
sure the output cables are well insulated to each other.
1 2
50mm
14mm
38mm
cool
warm
-
Single color Tunable white RGB RGBW
B R G BRGW
11
Function & Size
Wiring
Operation
2 3
Model: TM10 / TM20 / TM30 / TM40 (-A)
This series LED controllers are designed to drive
constant voltage LED products in voltage range of DC5-
24V. They can be controlled by the Umi compatible remote
controllers and Smartphone app (-A version only). With
advanced BLE mesh technology, controllers can work
synchronously with a robust connection. With the ultra
compact design, user can set up LED applications flexibly
and conveniently.
To 110/230
AC power
5-24V DC output
Power supply
LED
Controller
5-24V DC
LED Strips
Please connect the controller output to LED loads
and power supply to the controller power input. The
power supply voltage must be same as the LED load's
rated voltage. Check all cables to be well connected
and insulated before power on.
3. Pairing remote controllers
The controller can be paired with compatible Umi
remote controller for operation. To pair or unpair the
remote controller, user needs to connect and
disconnect the power of controller and press specific
combo keys on the remote controller. For detailed
method, please refer to the remote controller's user's
manual. Each controller can be paired up to total 5
remote controllers.
Umi wireless
remote controller
Umi Smart App
(-A version only)
Ultra Compact
BLE Mesh
Overheat Protection
DC 5-24V
Single color to RGBW Model
Remote + Smartphone
Dimming / Effects
Group / Scene
Group / Scene
Remtoe & Phone
Model TM40-A can be configured to different
application for single color, CCT, RGB or RGBW. For
different application, the 1-4 channel function is mapped
as following table:
