RayRun MP10-40 ユーザーマニュアル

ブランド: RayRun

モデル: MP10-40

タイプ: ユーザーマニュアル

RayRun MP10-40は、6Vから24Vの電源に対応した、定電圧LED製品を駆動するように設計されたLEDコントローラーです。最大12Aの電流を供給でき、単色、CCT、RGB、RGBWの4つのモードを切り替えて使用することができます。

RayRun MP10-40は、対応するRayRunリモコンを使用してワイヤレスで制御することができます。リモコンで明るさや色温度を調整したり、シーンモードを切り替えたりすることができます。また、RayRun MP10-40はスマートフォンアプリとも連動しており、アプリから操作することも可能です。

RayRun MP10-40は、IP63の防塵・防水性能を備えており、屋外での使用にも適しています。コンパクトなサイズで、設置場所を選びません。

RayRun MP10-40は、以下のような用途に使用することができます。

単色LEDテープや

RayRun MP10-40は、IP63の防塵・防水性能を備えており、屋外での使用にも適しています。コンパクトなサイズで、設置場所を選びません。

RayRun MP10-40は、以下のような用途に使用することができます。

単色LEDテープや

1. Power supply input

The controller supply voltage range is from DC 6V to

24V. The red power cable should be connected to power

positive and black to negative. (For other cable color,

please refer to the labels). The LED output voltage is at

same level as the power voltage, please make sure the

power supply voltage is correct and the power rating is

capable for the load.

2. LED output

Connect constant voltage LED loads to these cables.

Please make sure the LED rated voltage is same as the

power supply and each channel’s maximum load current

is in range of the controller rated current.

Please refer to following output wiring diagram for

different models:

Single color: red cable to LED  and black to  .

Tunable white: black cable to LED , white to cool

white  and yellow to warm white  . The two black

cables are connected inside the controller.

RGB and RGBW: black cable to LED , R, G, B and W

cable to the relevant color  .

3. Work status indicator

This indicator shows all working status of the

controller. It displays different events as following:

Steady blue: Normal working.

Short white blink: Command received.

White blink for 3 times: Identification or

confirmation.

Single yellow flash : Edge of the content.

Red flash: Overload protection.

Yellow flash: Overheat protection.

Green blink: Timing play activated.

Model: MP10 / MP20 / MP30 / MP40 (-A/T/S)

cool warm

-G R B WGRB

Single color Tunable white RGB RGBW

Full Protection

Waterproof

To 110/230

AC power

6-24V DC output

Power supply

LED Controller

6-24V DC

Constant voltage

LED load

86mm

21mm

64mm

1 2

* Picture for RGBW model

LED Controller

Umi Smart Wireless

Single color to RGBW Model

Remote + Smartphone

Timing / Waterpoof

Group / Scene

Ultra Compact

BLE Mesh Remote and Phone

Group / Scene

This series LED controllers are designed to drive

constant voltage LED products in voltage range of DC6-

24V. They can be controlled by the Umi compatible remote

controllers and Smartphone app (-A version). With

advanced BLE mesh technology, controllers can work

synchronously with a robust connection. For option, IP68

waterproof feature is available on -S version, and timing

play function is available on -T version.

Introduction

Function & Size

Umi wireless

remote controller

Umi Smart App

(-A & T version)

Wiring

Please connect the controller output to LED loads

and power supply to the controller power input. The

power supply voltage must be same as the LED load's

rated voltage. Check all cables to be well connected

and insulated before power on.

MP40

Application

CH1

(white cable)

CH2

(green cable)

CH3

(red cable)

CH4

(blue cable)

Single color

White

CCT

Cool white

Warm white

RGB

No use

Green

Red

Blue

RGBW

White

Green

Red

Blue

Model MP40-A and MP40-T can be configured to

different application for single color, CCT, RGB or RGBW.

For different application, the 1-4 channel function is

mapped as following table:

Advanced features

7. Waterproof (-S version)

The IP-68 waterproof feature with glue injection

finish is available on -S version controllers. For overall

waterproof performance, the cables must be waterproof

treated separately.

Wireless signal degrade : The wireless communication

ability could degrade when using at wet environment,

please be aware that the wireless control distance will be

shortened in such case.

10. Protection function

Specification

Model

MP10

MP20

MP30

MP40

Function

Single color

CCT

RGB

4-in-1

Working voltage

DC 6-24V

Rated output current

12A

2x7A

3x5A

3x3A+5A

Wireless connection

Umi protocol based on SIG BLE Mesh

Smartphone app support

Yes, -A & -T version

Timing play function

Yes, with backup battery. -T version

Communication distance

>20 meters at open area

Output mode

PWM constant voltage

PWM frequency

498Hz-20.9KHz

Overload protection

Yes

Overheat protection

Yes

Working temperature (Ta)

-20°C~+55°C

Waterproof

IP63 for standard version,

IP68 for -S version

Dimension

86x21x8.5mm

8. Force turning on

5. Control by smartphone

For -A & -T version controller, besides Umi wireless

remote controllers, it can also be controlled by Umi Smart

app. User can operate the controller from remote and/or

Umi Smart app. The status and group/scene features will

be synchronized from remote controller and App. Please

search and download ‘Umi Smart’ app from Apple app

store or Google play market to setup. There will also be a

QR code on the controller for app download link.

The controller will restore to the last on/off status

on each power on. To force turn on the controller at

OFF status, user need to connect and disconnect the

power of the controller for 3 times in a short time. After

this operation, the controller will be rest to ON status.

App download link: (for -A & -T version)

The controller has full protection function against

wrong wiring, load short circuit, overload and overheat.

The controller will stop working and the indicator will

flash with red / yellow color to indicate the malfunction.

The controller will try to recover from protection status

in a short time when the working condition is good.

For protection issues, please check the situation

with different indicator information:

Red flash: Check the output cables and load, make

sure no short circuit and the load current is in rated

range. Also the load must be constant voltage type.

Yellow flash: Check the installation environment,

make sure in a rated temperature range and with good

ventilation or heat dissipation condition.

9. Timing play with backup battery (-T version only)

A real time clock with backup battery is equipped

with the -T version model. With this feature, user can

setup timing play function with multiple repeating

features of weekday or date on the Umi Smart app.

The real time clock runs by itself and will correct

time once connected to the smartphone app. The built-

in backup battery will reserve the timing play setting

up to 48 hours after power cut. The saved timing play

function will be invalid after the backup battery runs

out and it will automatically recover once being

connected to smartphone again.

4. Pairing remote controllers

Operation

The controller can be paired with compatible Umi

remote controller for operation. To pair or unpair the

remote controller, user needs to connect and disconnect

the power of controller and press specific combo keys on

the remote controller. For detailed method, please refer

to the remote controller's user's manual. Each

controller can be paired up to total 5 remote controllers.

6. Change model function (MP40 only)

MP40-A and MP40-T controller’s function can be

changed from 1 channel (single color) to 4 channels

(RGB+White) by Umi Smart app.

To change the model function, please use the

Umi Smart app and detect factory default devices in

‘Discover nearby’ function and then tap the item icon

and select ‘change function’ menu to proceed.

9. Change PWM frequency to avoid noise and flicker

In some LED application, noise or flicker issue may

occur at the default or low PWM frequency. The

controller’s PWM frequency can be changed via the Umi

Smart app. The frequency must be tuned with LED type

and installation. To maintain more stable working and

less power loss, please do not set to high frequency if no

noise or flicker issues occurred.

To change the PWM frequency, please use the Umi

Smart app and detect factory default devices in ‘Discover

nearby’ function and then tap the item icon and select

‘change setting’ menu to proceed.

CAUTION: The controller’s efficiency will drop versus

increased frequency and the output current

1.电源输⼊

2.LED输出 3.⼯作状态指⽰灯

型号:MP10/MP20/MP30/MP40(-A/T/S)

冷暖

-G R B WGRB

单⾊冷暖⽩ RGB RGBW

防水

6- 24V DC

86mm

21mm

64mm

1 2

Umi智能⽆线

遥控+手机

群组/场景

简介

Umi⽆线遥控器 UmiSmart应⽤程序

(-A及-T版本)

接线⽅法

单色到 R G B W多机型

遥控器+智能手机

时控/防水选项

群组/场景

蓝牙自组网

全功能保护

小尺寸

该系列LED控制器⽤于驱动电压范围为DC6-24V

的恒压LED产品。⽤⼾可以通过Umi兼容的遥控器或

智能⼿机App（-A或-T版本）进⾏控制。基于先进的蓝⽛

⾃组⽹技术，控制器之前可以形成稳定可靠的⽆线连接

并实现多机同步功能。本机还具备完善的定时播放功能

（-T版本），同时具备IP68防⽔版本可选。

功能和尺⼨

连接到电源。控制器可接受直流6V⾄24V的供电

电压，请将红⾊电缆连接到电源正极，⿊⾊电缆连接

到电源负极。控制器的输出电平与电源输⼊电压相

同，安装前请确保电源电压正确且功率储备满⾜控制

器和负载的需求。

为保证安全，在通电前请先确保所有电缆均已可

靠连接且绝缘良好。

连接到LED灯具。LED灯具必须为恒压型且适⽤于

PWM驱动。对于多通道应⽤，各通道需为共阳极连接⽅

式。请确保LED的额定电压与电源相同，并且每个通道

的最⼤负载电流在控制器的额定电流范围内。下图⽰出

各机型输出电缆的功能。

MP40机型可配置为单⾊、冷暖⽩、RGB和RGBW的

各种应⽤，各配置的输出电缆功能如下表所⽰：

MP40功能

通道1

(⽩⾊电缆)

通道2

(绿⾊电缆)

通道3

(红⾊电缆)

通道4

(蓝⾊电缆)

单⾊

⽩

冷暖⽩

冷⽩

暖⽩

RGB

⽆功能

绿

红

蓝

RGBW

⽩

绿

红

蓝

该指⽰灯显⽰控制器的⼯作状态，指⽰灯的闪烁

⽅式与⼯作状态的对应关系如下：

蓝⾊常亮：正常⼯作

⽩⾊单闪：收到命令

⽩⾊慢闪3次：变更设置

⻩⾊单闪：已调⾄最⾼或最低

红⾊闪烁：过载保护

⻩⾊闪烁：过热保护

绿⾊慢闪：定时播放⽣效

请将控制器输出连接到合适的恒压LED灯具，并

将电源连接到控制器电源输⼊端。电源电压必须与

LED负载的额定电压相同。在通电前请检查所有电缆

是否连接良好并已可靠绝缘。

6-24V直流电源

接交流电 LED控制器

1-4路LED

恒压灯具

LED控制器

规格

型号

MP10

MP20

MP30

MP40

功能

单⾊

冷暖⽩

RGB

4合1

⼯作电压

DC6-24V

额定输出电流

12A

2x7A

3x5A

3x3A+5A

⽆线通讯协议

Umi协议，基于SIG蓝⽛Mesh

⼿机APP

⽀持,-A及-T版本

时控功能

内置后备电池，仅限-T版

⽆线⼯作距离

空旷地带>20⽶

输出⽅式

PWM恒压

PWM频率

498Hz-20.9KHz

过载保护

有

过热保护

有

环境温度范围

-20°C~+55°C

防⽔

标准版IP63,-S版IP68

尺⼨

86x21x8.5mm

扫码下载UmiSmartAPP:(-A及-T版)

⾼级功能

6.变更机型功能（仅适⽤于MP40）

对于MP40-A和MP40-T机型，可以通过UmiSmart

app更改控制器功能，以实现从单⾊到RGBW的各种应

⽤模式。

如需更改机型功能，请使⽤UmiSmartapp并在

“发现附近”功能中搜索未配置的设备，然后点击产品

图标并选择“更改功能”，然后选择需变更到的机型。

4. 遥控器配对

操作⽅法

控制器可与兼容的Umi遥控器配对进⾏操作。要对

遥控器进⾏配对或取消配对，⽤⼾需要连接和断开控制

器的电源或者在app上激活配对模式，然后按遥控器上

的特定组合键。具体⽅法请参考遥控器使⽤说明书。每

个控制器最多可配对5个遥控器。

5. 通过智能⼿机操控

对于-A版控制器，除了使⽤⽆线遥控器外，还可以

同时通过UmiSmartApp进⾏控制。

⽤⼾可以仅使⽤遥控器、仅使⽤app或者同时使⽤

遥控器和app进⾏操作。控制器的⼯作状态、分组状态

和场景模式在遥控器和app上可以实现同步。请扫描机

⾝上的⼆维码或者在各⼤应⽤市场搜索“UmiSmart”

来安装App。

7.IP68防⽔(仅限-S机型)

后缀为-S版本的控制器应⽤了注胶防⽔⼯艺，可以

达到IP68的防⽔等级。为了确保整体的防⽔效果，需要

对输⼊输出电缆做单独的防⽔处理。

请注意：在浸⽔环境下，控制器的⽆线通信能⼒会

下降，⽆线通信距离会缩短甚⾄⽆法通信。

11. 保护功能

8.强制开启

控制器在每次通电时会恢复到上次的开/关状态。

要把通电后在‘关’的状态的控制器强制开启，⽤⼾需

要在短时间内连接和断开控制器电源3次，即可将控

制器强制开启。

本产品具有完善的保护功能，可以最⼤程度的防⽌

因接线错误、负载短路、过载或过热⽽引起的产品损

坏。当发⽣以上异常状态时控制器将停⽌⼯作，同时指

⽰灯会闪烁红⾊或⻩⾊。当⼯作状态良好时，控制器会

尝试恢复正常⼯作。

当控制器停⽌⼯作时，请检查指⽰灯的状态，在不

同的闪烁状态下应检查相应的故障：

红⾊闪烁：请检查输出电缆是否短路、负载电流是

否过⾼，并且请确保所驱动灯具为恒压驱动类型。

⻩⾊闪烁：请检查控制器的安装环境以及负载功

率，并确保控制器散热条件良好且负载功率在额定范

围之内。

10.更改PWM频率以避免噪⾳和频闪

在某些应⽤中，灯具可能会因PWM驱动⽅式出现

噪⾳或频闪问题，本机可以通过调整PWM频率来优化

这类问题。提⾼PWM频率后控制器的⼯作效率会有所

下降，某些灯具可能⽆法正常⼯作。因此为保证系统⼯

作更加稳定，请尽量设置到较低的PWM频率。

要更改PWM频率，请使⽤UmiSmartApp在“发现

附近”功能中点击未配置的设备，然后选择“更改设置”

菜单进⾏配置。

注意：在PWM频率升⾼时，控制器的发热量会相应

增加，在频率⾼于4KHz时，根据应⽤条件控制器的输

出电流最多需降额约50%，以避免发⽣过热。

9. 可断电保持的定时播放功能（仅限-T机型）

后缀为-T的机型配备了带后备电源的实时钟功

能。⽤⼾可以通过UmiSmart应⽤设置可编辑⽇期、时

间和灯具状态的定时播放功能。

本机的时钟在连接到⼿机后会⾃动校准，控制器

的后备电源可以确保在断电48⼩时内仍准确保留定时

播放设置。在断电且后备电源⽤尽的情况下定时播放

功能会暂时失效，在控制器再次连接⼿机后即可⾃动

恢复。

RayRun MP10-40 ユーザーマニュアル

ブランド: RayRun

モデル: MP10-40

タイプ: ユーザーマニュアル

RayRun MP10-40は、IP63の防塵・防水性能を備えており、屋外での使用にも適しています。コンパクトなサイズで、設置場所を選びません。

RayRun MP10-40は、以下のような用途に使用することができます。

単色LEDテープや

PDFをダウンロードします

報告

他の言語で

English: RayRun MP10-40 User manual

RayRun MP10-40 ユーザーマニュアル

RayRun MP10-40 ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント