AGPtek LEDGTA 取扱説明書

ブランド: AGPtek

モデル: LEDGTA

タイプ: 取扱説明書

Welcome Guide

English 01 - 23 | 日本語 24 - 46

Model: LEDGTA

Smart WiFi LED Strip Light

Product Parameter

Category

LED Controller

Domination Principle

WiFi

APP

Magic Home Pro

Operation Platform

Android 4.0 or IOS 9.0 or higher

LED Drive Type

Constant voltage MOSFET

Channels

Input Voltage

DC 5-28 V

Max Output Power

144W

Work For

LED Strip or other constant voltage lights

Connect Method

Common Anode

IP Rating

IP20

Working Temperature

-20 - 55℃

Control Distance

Visible distance 30M

Net Weight

36.5g

Dimension(L*B*H)

53*24*11MM

Controller Connection Mode

Connection schematic diagram

Power adapter

LED Strip or other

constant voltage lights

Important Notice:

If you need to make DIY modification to the

device, please contact our customer service and

operate under their guidance. Precautions: please

follow the left side diagram instruction when

doing DIY modifications.

Controller and device connection:

It is necessary to ensure that the red arrow of

the controller corresponds to the black arrow at

the device end, otherwise the device will have a

short circuit.

The connection between the

controller and the power supply

Software Guidance for iOS

APP Installation Instructions:

Method 1: Search Magic Home Pro in “APP Store” and download the app.

Method 2: Download the APP by scanning the

QR code for free.

Software Guidance for Android

APP Installation Instructions:

Method 1: Search Magic Home Pro in “Google Play Store” or from browsers.

Method 2: Download the APP by scanning the

QR code for free.

Magic Home Pro

Instructions

There are three different ways to connect the controller after it has been connected

to the power supply.

a) Wi-Fi Mode:

1. Register/Login your Magic Home account.

2. Open the app and Click "+" button on the top right

corner, then select "connect device to Wi-Fi network".

3. Open the Wi-Fi interface of phone and connect to the “LEDnetxxxxx” signal. (if

can’t find, please reset your controller, turn it on & off for 3 times.) After successful

connection, go back to the Magic Home Pro app.

4. Connect to your home network. Select your home network in the Wi-Fi list and

enter the correct Wi-Fi password. Then enter the device name and click “complete”.

b) Remote Control via Internet:

When Wi-Fi mode is completed, the remote settings are enabled by default. No

matter where you are, you still can control your lights with APP as long as there’s

Wi-Fi/3G/4G internet for your smartphone.

c) 1 to 1 Mode:

Open mobile Wi-Fi network signal, find “LEDnet******” signal and connect, then

open Magic Home Pro APP.

Instruction of Remote Controller

44-key infrared control instruction: (For controllers with infrared function)

1. The default setting of the WIFI controller is 4 channels in the sequence of RGBW

(sequence of GRB for RGB version, GRBWC for RGBWC version). If you want to

change the output channel, the steps are as follows: unplug the controller power

and then plug in again. When the light up, long press the key B for 2 to 3s, the

flickering white light means you’ve successfully changed the output channel to

BRGW; Similarly, long press key G will change the channel to GRBW sequence; long

press key R to RGBW sequence.

2. In RGBW version, press W key for RGB and white light; long press W key for 2

seconds will switch to W channel.

If the network connect successfully,

you can enter the APP for operation.

(Note: only for indoor use, and the

operating range is 20 meter.)

a) Button Function

b) Summarization

44-keys infrared LED RGB remote controller adopts advanced micro computer

technology which controls all kinds of led lightings. It has many advantages such as

low price, simple wiring and it's very easy to use. You can adjust the colors, speed,

brightness, dynamic modes and customize your own colors by using this IR remote

controller.

White Color Strobe

ON/OFF

Brightness +/-

Pause/run

Static Mode

DIY Mode

3 Color jumpy

change or fade

7 Color jumpy

change or fade

Speed +

Speed -

Dynamic Mode Loop

c) Functional Specification

ON/OFF

Press to turn on/off the controller

Pause/Run

Press to suspend mode operation

Brightness+/-

Press to lighten the lights

Press to dim the lights

Static Modes

Static mode can be selected quickly

DIY Modes

DIY your own colors and press those

buttons above DIY mode buttons to

adjust the luminance of your lights.

These setting mode will be saved

automatically for convenient use in the

future.

DIY Mode

Brightness +/-

Press to change the brightness of the

lights under DIY mode

Speed +

Press to speed up the modes

Speed-

Press to slow down the modes

Dynamic Mode

Loop

Press to achieve all dynamic mode

cyclic transformation

White Color

Strobe

Press to achieve white color strobe

mode

7 Colors Fade

Press to achieve 7 colors fade mode

3 Colors Fade

Press to achieve 3 colors fade mode

7 Colors Jump

Press to achieve 7 colors jump mode

3 Colors Jump

Press to achieve 3 colors jump mode

Step 1: Create Your Magic Home Cloud Account

In order to control your smart light with the Google Assistant or control them

remotely, you need to create a Magic Home cloud account and sign in.

Step 2: Add Your Light and Modify The Name

Make sure there is at least one smart light in device list, and enable your lights for

remote control. On "Home" page, long press the light to rename.

Work With

Google Assistant

Step 3: Add Home Control Action

Add device in Home Control of the Home app. Select “Magic Home WiFi”.

Step 4: Login with Your App Account

Enter your app account and password to finish the account linking. (Use the Magic

Home cloud account you used on step 1). Your lights will be listed on “Home

Control” interface .

Step 5: Control Your Light

Here, you finish all setups. You can now control your lights by issuing voice

commands.

Supported Voice Commands

Say "Ok Google" or "Hey Google", then..

Turn on <light name>

Dim <light name>

Brighten <light name>

Set <light name> to [50%]

Dim/Brighten <light name> by [50%]

Turn <light name> [color]

Turn on/off all the lights

Is <light name> on?

Changing Colors on Your Lights

Color options that the voice control of Google Home can support are:

Blue, Orange, Crimson , Purple, Cyan, Red, Fuchsia, Salmon, Gold, Sky Blue, Green,

Teal, Lavender, Turquoise, Lime, Violet , Magenta, Yellow

Step 1: Create Your Magic Home Cloud Account

In order to control your smart light with the Amazon Echo or control them remotely,

you need to create a Magic Home cloud account and sign in.

Work With

Amazon Alexa

Step 2: Add Your Light and Modify The Name

Make sure there is at least one smart light in device list, and enable your lights for

remote control. On "Home" page, long press light to rename.

Step 3: Enable Alexa Skill

The next step is to download the Amazon Alexa app. After open the Amazon Alexa

app, search for the “Magic Home” skill under the skills section. The account and

password must be the same as you created in Magic Home Pro APP.

Step 4: Login and Discover Devices

Use your Magic Home cloud account you created in step 1 to sign in to "Magic

Home" Skill. The next step is to discover your smart lights from Alexa app. You can

say “Alexa, discover devices”.

Once Alexa has completed discovering your smart lights, they will be shown in the

Smart Home section in Alexa app.

Step 5: Control Your Light

Here, you finish all setups. You can now control your lights by issuing voice

commands.

Supported Voice Commands

These are some of the currently supported Alexa voice commands for the smart

light:

Alexa, set [light name] to [0-100]%

Alexa, turn [light name] on/oﬀ

Alexa, dim/brighten [light name]

Alexa, increase/decrease [light name]

Alexa, set the [light name] light to red

Alexa, change the [light name] to the color blue

Alexa, make the [light name] warm white

Alexa, change the [light name] to the cool white

Alexa, set the [light name] to daylight

Changing Colors on Your Lights

Color options that the voice control of smart lights via Alexa can support are:

Blue, Orange, Crimson, Purple, Cyan, Red, Fuchsia, Salmon, Gold, Sky Blue, Green,

Teal, Lavender, Turquoise, Lime, Violet, Magenta, Yellow

Product Function Introduction

Support 16 million color control and brightness adjustment.

You can adjust both the color RGB (Red/Green/Blue) as well

as the brightness of the color. It's likewise possible in this

function to adjust and store 5 own created colors and

brightness levels. You can save this if you press long on the

“DIY” button.

The adjusted color/brightness will be stored and displayed

in the “DIY” button. You can recall the color/brightness if

you press shortly on one of the five DIY buttons. On the

display top left, the individual channels R/G/B can be called

separately and adjusted from 0-255 to obtain the desired

color.

RGBW

In addition to the functions as in RGB mode, the warm white channel adjusts

separately. (Warm White & RGB channels cannot be used simultaneously.)

Support for customised colors and preservation

In DIY function, you can select your favorite colors and gradual, jump or strobe

between the functions. Press the menu “customs” and then “Add New Mode”. By

briefly pressing one of the selection rectangles, you can change the color. By

pressing long, you can delete the color. It can be defined in a sequence up to 16

different colors. After setting the color, speed and name of the user mode, press

“save” on the top right. Now you see your personal role in the selection mode. You

can create unlimited changing modes and they can always be edited or deleted.

Group Feature

It (Magic Home Pro) allows you to create different groups to control more than one

controllers, for example, if you have 2 controller units, you can use one system in

your living room & the other on your patio. The grouping function allows you to

either control these systems individually or to group them together as one unit.

Light timer

You can have your lights automatically on or off in a specified time by setting up the

timer.

The controller has a build in timer function. To do so, press on the top right, next to

ON/OFF, switch the clock icon. Then the selection menu will be shown with Time,

Repeat (Mon-Sun), ON/OFF switch and the optional model (color setting, brightness

and gradient program.) The timer will not operate when the power supply is

interrupted. In this case, start the APP to resynchronize.

Light and music rhythm synchronization function

In this function, you can let the connected LED shine in the rhythm of the music will

be played on the smartphone or tablet. To do this, select the menu item “select

music” and then select the desired music on your music library on smartphone or

tablet.

There are four main modes for four music styles: ROCK for rock & roll music style,

NORMAL for default music style, JAZZ for jazz music style, CLASSICAL for classical

music style.

iOS system needs to download music files in iTunes or copy audio files from

computer's iTune to iPhone. After then, you can select the music when you open

APP music mode to synchronize the lights with music rhythm. The light color

changes automatically with music rhythm.

Android system needs to download the music files to the phone for use.

Function

In this capacity, 20 gradients are preset. In addition, you can adjust the speed of the

gradients with a slider. With the keys M+/M- or scroll up and down you can switch

between the gradient modes.

ページが読み込まれています...

AGPtek LEDGTA 取扱説明書

ブランド: AGPtek

モデル: LEDGTA

タイプ: 取扱説明書

PDFをダウンロードします

報告

他の言語で

English: AGPtek LEDGTA Owner's manual

AGPtek LEDGTA 取扱説明書

AGPtek LEDGTA 取扱説明書

他の言語で

その他のドキュメント