TP-LINK UE300 ユーザーガイド

User Guide

Model No.UE300C, UE300, UE330, UE200

ATTENTION

♦ When product has power button, the power button is one of the way to shut o the

product; when there is no power button, the only way to completely shut o power is

to disconnect the product or the power adapter from the power source.

♦ Don’t disassemble the product, or make repairs yourself. You run the risk of electric

shock and voiding the limited warranty. If you need service, please contact us.

♦ Keep the device away from water, re, humidity or hot environments.

♦ This USB Adapter can be powered only by computers that provide ES1, and comply with

Limited Power Source(LPS) or PS2.

Recycling

This product bears the selective sorting symbol for Waste electrical and electronic

equipment (WEEE).

This means that this product must be handled pursuant to European directive 2012/19/EU

in order to be recycled or dismantled to minimize its impact on the environment.

User has the choice to give his product to a competent recycling organization or to the retailer

when he buys a new electrical or electronic equipment.

For technical support, replacement services, the user guide and more

information, please visit https://www.tp-link.com/support, or simply scan

the QR code.

If you have any suggestions or needs for our product guides, you

are welcome to email [email protected].

To communicate with TP-Link users or engineers, please visit

https://community.tp-link.com to join TP-Link Community.

LED Indication

UE300C:

For Windows 7/8/8.1, Mac OS X 10.8 and older version, please download and install a

driver from our ocial website: www.tp-link.com, and search the model No.

UE300, UE330 and UE200:

For Windows 7/8/8.1, please click to install a driver if prompted to do so. For Windows 7,

please click CANCEL if prompted "The program might not

have installed correctly" after installation.

For Mac OS X 10.8 and older version, please download

and install a driver from our ocial website:

www.tp-link.com, and search the model No.

This adapter supports Plug and Play feature. Plug in and wait for seconds.

Then this adapter is ready to use.

Status IndicationLED (for UE330)

LED (for UE300C, UE300, UE200)

Green

Yellow The Ethernet cable is properly connected

White

Flashing

On The adapter is properly connected and hub is ready to use

Network data is being transferred

Both the adapter and Ethernet cable are properly connected

Network data is being transferred

USB Port

wired network

RJ45 Port

computer

*use UE330 as illustration

BSMI Notice

安全諮詢及注意事項

♦ 請使用原裝電源供應器或只能按照本產品注明的

電源類型使用本產品。

♦

清潔本產品之前請先拔掉電源線。請勿使用液體、

噴霧清潔劑或濕布進行清潔。

♦

注意防潮，請勿將水或其他液體潑灑到本產品上。

♦ 插槽與開口供通風使用，以確保本產品的操作可

靠並防止過熱，請勿堵塞或覆蓋開口。

♦ 請勿將本產品置放於靠近熱源的地方。除非有正

常的通風，否則不可放在密閉位置中。

♦

請不要私自打開機殼，不要嘗試自行維修本產品，

請由授權的專業人士進行此項工作。

限用物質及其化學符號

鉛

鎘

汞

六價鉻

CrVI

多溴聯苯

PBB

多溴二苯醚

PBDE

產品元

件名稱

PCB

外殼

○ ○ ○ ○

○ ○ ○ ○ ○

○

備考1. "超出0.1 wt %" 及 "超出0.01 wt %" 系指限用物

質之百分比含量超出百分比含量基準值。

備考2. "○"系指該項限用物質之百分比含量未超出百分

比含量基準值。

備考3. " — " 系指該項限用物質為排除項目。

限用物質含有情況標示聲明書

TP-Link hereby declares that the device is in

compliance with the essential requirements

and other relevant provisions of directives

2014/30/EU, 2014/35/EU, 2009/125/EC,

2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may

be found at https://www.tp-link.com/en/ce

FCC STATEMENT

This device complies with part 15

of the FCC Rules. Operation is

subject to the following two conditions:

1) This device may not cause harmful

interference.

This device must accept any interference

received, including cause undesired

operation.

Any changes or modications not expressly

approved by the party responsible for

compliance could void the user’s authority

to operate the equipment.

CE Mark Warning

This is a class B product. In a

domestic environment, this

product may cause radio interference, in

which case the user may be required to

take adequate measures.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

○

TP-LINK UE300, UE200, UE300C ユーザーガイド

関連論文