SICK GTB6L 取扱説明書

O P E R A T I N G I N S T R U C T I O N

GTB6L

Miniature photoelectric sensors

O P E R A T I N G I N S T R U C T I O N

GTB6L

Miniature photoelectric sensors

de

en

es

fr

it

ja

ko

pt

ru

zh

Described product

G6L

GTB6L

Manufacturer

SICK AG

Erwin-Sick-Str. 1

79183 Waldkirch

Germany

Production location

SICK Malaysia

Legal information

This work is protected by copyright. Any rights derived from the copyright shall be

reserved for SICK AG. Reproduction of this document or parts of this document is

only permissible within the limits of the legal determination of Copyright Law. Any modi‐

fication, abridgment or translation of this document is prohibited without the express

written permission of SICK AG.

The trademarks stated in this document are the property of their respective owner.

Original document

This document is an original document of SICK AG.

Laser

1

2006/42/EC

NO

SAFETY

8025391.1BHT / 2021-04-19 | SICK

Subject to change without notice

3

Contents

1 General safety notes......................................................................... 5

2 Notes on UL approval........................................................................ 5

3 Intended use...................................................................................... 5

4 Operating and status indicators...................................................... 6

5 Mounting............................................................................................. 6

6 Electrical installation........................................................................ 7

7 Commissioning.................................................................................. 9

7.1 Alignment.................................................................................................. 9

7.2 Sensing range........................................................................................... 9

7.3 Settings..................................................................................................... 10

8 Troubleshooting................................................................................. 11

9 Disassembly and disposal............................................................... 12

10 Maintenance...................................................................................... 12

11 Technical specifications................................................................... 13

11.1 Dimensional drawing................................................................................ 14

11.2 Light spot diagram.................................................................................... 14

CONTENTS

4

8025391.1BHT / 2021-04-19 | SICK

Subject to change without notice

1 General safety notes

■

Read the operating instructions before commissioning.

■

Connection, mounting, and configuration may only be performed by trained

specialists.

■

2006/42/EC

NO

SAFETY

Not a safety component in accordance with the EU Machinery Directive.

■

Do not install the sensor at locations that are exposed to direct sunlight

or other weather influences, unless this is expressly permitted in the operating

instructions.

■

When commissioning, protect the device from moisture and contamination.

■

These operating instructions contain information required during the life cycle of

the sensor.

EN/IEC 60825-1:2014

IEC60825-1:2007

LASER CLASS 1

Laser

1

Maximum pulse power < 5.95 mW

Puls length: 2 µs

Wavelength: 670 - 690 nm

Complies with FDA performance

standards except for conformance with

IEC 60825-1 Ed. 3,

as described in Laser Notice No. 56,

dated May 8, 2019

ATTENTION

WARNING: Interruption, manipulation or incorrect use can lead to hazardous exposure

due to laser radiation.

2 Notes on UL approval

The device shall be supplied from an isolating transformer having a secondary overcur‐

rent protective device that complies with UL 248 to be installed in the field rated either:

a) max 5 amps for voltages 0 ~ 20 V (0 ~ 28.3 V peak), or

b) 100 / Vp for voltages of 20 ~ 30 V (28.3 ~ 42.4 V peak).

Alternatively, they can be supplied from a Class 2 power supply.

UL Environmental Rating: Enclosure type 1

3 Intended use

The GTB6L is an opto-electronic photoelectric proximity sensor (referred to as “sensor”

in the following) for the optical, non-contact detection of objects. If the product is used

for any other purpose or modified in any way, any warranty claim against SICK AG shall

become void.

GENERAL SAFETY NOTES 1

8025391.1BHT / 2021-04-19 | SICK

Subject to change without notice

5

4 Operating and status indicators

Photoelectric proximity sensor with background suppression.

GTB6L-xxx1x

1

2 3

23

1

Potentiometer: sensitivity adjustment

2

LED indicator yellow: status of received light beam

3

LED indicator green: supply voltage active

GTB6L-xxx3x

Sensor which it is not possible to set: The sensor is adjusted and ready for operation.

2 3

23

5 Mounting

Mount the sensor using a suitable mounting bracket (see the SICK range of accesso‐

ries).

Note the preferred orientation of the sensor relative to the direction of object motion,

refer to figure 1.

4 OPERATING AND STATUS INDICATORS

6

8025391.1BHT / 2021-04-19 | SICK

Subject to change without notice

Figure 1: Sensor orientation relative to object direction

6 Electrical installation

The sensors must be connected in a voltage-free state (U

V

= 0 V). The following informa‐

tion must be observed depending on the connection type:

– Plug connection: pin assignment

– Cable: wire color

Only apply voltage/switch on the voltage supply (U

V

> 0 V) once all electrical connec‐

tions have been established.

Explanation of connection terminology:

BN = Brown

WH = White

BU = Blue

BK = Black

n. c. = no connection

Q = switching output 1

Q = switching output 2

L+ = supply voltage (Uv)

M = common

L.ON = light operate

D.ON = dark operate

ELECTRICAL INSTALLATION 6

8025391.1BHT / 2021-04-19 | SICK

Subject to change without notice

7

Connection and Output detail:

Table 1: DC

GTB6L -P1xxx

-N1xxx

-E2xxx

-F2xxx

-P3xxx

-N3xxx

-P5xxx

-N5xxx

-P4xxx

-N4xxx

-P6xxx

-N6xxx

-P7xxx

-N7xxx

-E4xxx

-F4xxx

-E6xxx

-F6xxx

-E7xxx

-F7xxx

1 = BN + (L+) + (L+) + (L+) + (L+) + (L+)

2 = WH -

Q

- n. c.

Q

3 = BU - (M) - (M) - (M) - (M) - (M)

4 = BK Q Q Q Q Q

0.205 mm

2

/

AWG24

0.205 mm

2

/

AWG24

1

4

3

2

1

4

3

2

1

4

3

Table 2: Output function

GTB6L

-Px1xx

-Px2xx

-Px3xx

-Px4xx

L.ON, PNP: Q (≤ 100 mA)

+ (L+)

Q

‒ (M)

Load

+ (L+)

Q

‒ (M)

Load

-Px1xx

-Px2xx

-Px5xx

-Px6xx

D.ON, PNP: Q (≤ 100 mA)

+ (L+)

Q

‒ (M)

Load

+ (L+)

Q

‒ (M)

Load

-Nx1xx

-Nx2xx

-Nx3xx

Nx4xx

L.ON, NPN Open Collector Q (≤ 100 mA)

+ (L+)

Q

‒ (M)

Load

+ (L+)

Q

‒ (M)

+ (L+)

Q

‒ (M)

Load

-Nx1xx

-Nx2xx

-Nx5xx

-Nx6xx

D.ON, NPN Open Collector Q (≤ 100 mA)

+ (L+)

Q

‒ (M)

+ (L+)

Q

‒ (M)

Load

+ (L+)

Q

‒ (M)

Load

6 ELECTRICAL INSTALLATION

8

8025391.1BHT / 2021-04-19 | SICK

Subject to change without notice

7 Commissioning

7.1 Alignment

Align sensor on object. Select the position so that the red emitted light beam hits the

center of the object. You must ensure that the optical opening (front screen) of the

sensor is completely clear [see figure 2].

Figure 2: Alignment

7.2 Sensing range

Adjust the mounting position to ensure the sensing range and the background are

within the specifications. See see figure 3, page 10.

NOTE

Observe the minimum distance of 5 mm.

Check the function as described in see table 2, page 8. If the switching output fails to

behave as described in see table 2, page 8, check the application conditions.

Minimum distance in mm (y) between the set sensing range (x) and white background

(90% remission):

COMMISSIONING 7

8025391.1BHT / 2021-04-19 | SICK

Subject to change without notice

9

6%/90%

18%/90%

90%/90%

1

2

3

yx

0

5

10

15

25

20

30

50

(1.97)

100

(3.94)

150

(5.91)

200

(7.87)

300

(11.81)

250

(9.84)

0

Distance in mm (inch)

350

(13.78)

400

(15.75)

35

40

y

x

Figure 3: GTB6L

0

1

2

3

400

250

Distance in mm (inch)

100

(3.94)

200

(7.87)

300

(11.81)

400

(15.75)

10/30

18015/30

D

A

B

C

10/30

Figure 4: GTB6L

Example: Reliable suppression of background:

White background (90% remission)

Black object (6% remission)

Set sensing range x = 150 mm

Required minimum distance to white background y = 20 mm

1

Sensing range on black, 6% remission

2

Sensing range on gray, 18% remission

3

Sensing range on white, 90% remission

A Sensing range min. in mm

B Sensing range max. in mm

C Visibility range

D Setting range switching threshold for background suppression

blue Recommended sensing range for the best performance

7.3 Settings

Sensing range setting

Sensor which it is not possible to set: The sensor is adjusted and ready for operation.

The sensing range is adjusted with the potentiometer (type: 5-turn). Clockwise rotation:

sensing range increased; counterclockwise rotation: sensing range reduced. We recom‐

mend placing the object within the sensing range, e.g. see figure 3. Once the sensing

7 COMMISSIONING

10

8025391.1BHT / 2021-04-19 | SICK

Subject to change without notice

range has been adjusted, the object is removed from the path of the beam, which

causes the background to be suppressed and the switching output to change [see

table 2].

Table 3: Adjustment sensing range

The sensor is adjusted and ready for operation.

8 Troubleshooting

The Troubleshooting table indicates measures to be taken if the sensor stops working.

Table 4: Troubleshooting

LED indicator/fault pattern Cause Measures

Yellow LED does not light up

even though the light beam is

aligned to the object and the

object is within the set sensing

range

No voltage or voltage below

the limit values

Check the power supply,

check all electrical connec‐

tions (cables and plug connec‐

tions)

Voltage interruptions Ensure there is a stable power

supply without interruptions

Sensor is faulty If the power supply is OK,

replace the sensor

Yellow LED flashes Sensor is still ready for oper‐

ation, but the operating condi‐

tions are not ideal

Check the operating condi‐

tions: Fully align the beam

of light (light spot) with the

object / Clean the optical sur‐

faces / Check sensing range

and adjust if necessary

Yellow LED lights up, no object

in the path of the beam

The sensing range distance is

too large

Reduce the sensing range

Object is in the path of the

beam, yellow LED does not

light up

Distance between the sensor

and the object is too long or

sensing range is set too short

Reduce the sensing range

TROUBLESHOOTING 8

8025391.1BHT / 2021-04-19 | SICK

Subject to change without notice

11

9 Disassembly and disposal

The sensor must be disposed of according to the applicable country-specific regula‐

tions. Efforts should be made during the disposal process to recycle the constituent

materials (particularly precious metals).

NOTE

Disposal of batteries, electric and electronic devices

•

According to international directives, batteries, accumulators and electrical or

electronic devices must not be disposed of in general waste.

•

The owner is obliged by law to return this devices at the end of their life to the

respective public collection points.

•

WEEE: This symbol on the product, its package or in this document,

indicates that a product is subject to these regulations.

10 Maintenance

SICK sensors are maintenance-free.

We recommend doing the following regularly:

•

Clean the external lens surfaces

•

Check the screw connections and plug-in connections

No modifications may be made to devices.

Subject to change without notice. Specified product properties and technical data are

not written guarantees.

9 DISASSEMBLY AND DISPOSAL

12

8025391.1BHT / 2021-04-19 | SICK

Subject to change without notice

11 Technical specifications

GTB6L

Laser class 1

Sensing range 30 ... 400 mm

Sensing range max. 10 ... 400 mm

1)

Light spot diameter/distance 0.4 mm / 150 mm

Supply voltage U

B

DC 10 ... 30 V

2)

Output current I

max.

100 mA

3)

Switching frequency 1,000 Hz

4)

Max. response time 0.625 ms

5)

Enclosure rating IP67

Protection class III

Circuit protection A, C, D

6)

Ambient operating temperature -20 ... +50 °C

7)

1)

Object with 90 % remission (based on standard white DIN 5033)

2)

Limit values. U

B

connections reverse-polarity protected. Residual ripple max 5 V

PP

3)

As of U

B

> 24 V, a max. load current I

max.

= 50 mA is permitted.

4)

With light / dark ratio 1:1

5)

Signal transit time with resistive load

6)

A = U

B

-connections reverse polarity protected

C = Interference suppression

D = outputs overcurrent and short-circuit protected

7)

As of T

a

≥ 45 °C, a max. supply voltage U

B

= 24 V and a max. load current I

max.

= 50 mA is permitted.

TECHNICAL SPECIFICATIONS 11

8025391.1BHT / 2021-04-19 | SICK

Subject to change without notice

13

11.1 Dimensional drawing

10.2 (0.4)

6.9 (0.27)

0.5

(0.02)

21

(0.83)

0.5

(0.02)

9.7

(0.38)

3

(0.12)

11.5

(0.45)

31.5 (1.24)

28.5 (1.12)

25.4 (1.00)

2.3

(0.09)

18.3

(0.72)

305 (12.01)

9.7

(0.38)

12

(0.47)

1

2

4

3

Figure 5: Dimensional drawing

1

Center of optical axis, sender

2

Center of optical axis, receiver

3

Operating and status indicators

4

M3 threaded mounting hole

11.2 Light spot diagram

Sensor

Ø 0.4

(0.02)

Ø 2.2

(0.09)

Ø 1.8

(0.07)

Ø 4.6

(0.18)

Distance in mm (inch)

Diameter in mm (inch)

25

(0.98)

150

(5.91)

250

(9.84)

400

(15.75)

11 TECHNICAL SPECIFICATIONS

14

8025391.1BHT / 2021-04-19 | SICK

Subject to change without notice

B E T R I E B S A N L E I T U N G

GTB6L

Miniatur-Lichtschranke

de

en

es

fr

it

ja

ko

pt

ru

zh

Beschriebenes Produkt

G6L

GTB6L

Hersteller

SICK AG

Erwin-Sick-Str. 1

79183 Waldkirch

Deutschland

Fertigungsstandort

SICK Malaysia

Rechtliche Hinweise

Dieses Werk ist urheberrechtlich geschützt. Die dadurch begründeten Rechte bleiben

bei der Firma SICK AG. Die Vervielfältigung des Werks oder von Teilen dieses Werks

ist nur in den Grenzen der gesetzlichen Bestimmungen des Urheberrechtsgesetzes

zulässig. Jede Änderung, Kürzung oder Übersetzung des Werks ohne ausdrückliche

schriftliche Zustimmung der Firma SICK AG ist untersagt.

Die in diesem Dokument genannten Marken sind Eigentum ihrer jeweiligen Inhaber.

Originaldokument

Dieses Dokument ist ein Originaldokument der SICK AG.

Laser

1

2006/42/EC

NO

SAFETY

16

8025391.1BHT / 2021-04-19 | SICK

Subject to change without notice

Inhalt

12 Allgemeine Sicherheitshinweise..................................................... 18

13 Hinweise zur UL Zulassung.............................................................. 18

14 Bestimmungsgemäße Verwendung............................................... 19

15 Betriebs- und Statusanzeigen.......................................................... 19

16 Montage.............................................................................................. 19

17 Elektrische Installation..................................................................... 20

18 Inbetriebnahme................................................................................. 22

18.1 Ausrichtung............................................................................................... 22

18.2 Schaltabstand........................................................................................... 22

18.3 Einstellungen............................................................................................. 23

19 Störungsbehebung............................................................................ 24

20 Demontage und Entsorgung............................................................ 25

21 Wartung.............................................................................................. 25

22 Technische Daten.............................................................................. 26

22.1 Maßzeichnung........................................................................................... 27

22.2 Lichtfleckdiagramm.................................................................................. 27

INHALT

8025391.1BHT / 2021-04-19 | SICK

Subject to change without notice

17

12 Allgemeine Sicherheitshinweise

■

Lesen Sie vor der Inbetriebnahme des Geräts die Betriebsanleitung.

■

Der Anschluss, die Montage und die Konfiguration des Geräts dürfen nur

von geschultem Fachpersonal vorgenommen werden.

■

2006/42/EC

NO

SAFETY

Bei diesem Gerät handelt es sich um kein sicherheitsgerichtetes Bauteil im

Sinne der EU-Maschinenrichtlinie.

■

Installieren Sie den Sensor nicht an Orten, die direkter Sonneneinstrahlung

oder sonstigen Wettereinflüssen ausgesetzt sind, ausser dies ist in der Betriebs‐

anleitung ausdrücklich erlaubt.

■

Bei der Inbetriebnahme ist das Gerät ausreichend vor Feuchtigkeit und Verschmut‐

zung zu schützen.

■

Die vorliegende Betriebsanleitung enthält Informationen, die während des Lebens‐

zyklus der Lichtschranke benötigt werden.

EN/IEC 60825-1:2014

IEC60825-1:2007

LASERKLASSE 1

Laser

1

Maximale Pulsleistung: < 5,95 mW

Impulsdauer: 2 µs

Wellenlänge: 670 - 690 nm

Entspricht den FDA

Leistungsstandards mit Ausnahme der

Konformität mit IEC 60825-1, Ed. 3

wie im Laserhinweis Nr. 56 vom

08.05.2019 beschrieben

ACHTUNG

WARNUNG: Eingriffe, Manipulation oder eine unsachgemäße Verwendung können zu

gefährlicher Exposition gegenüber Laserstrahlung führen.

13 Hinweise zur UL Zulassung

The device shall be supplied from an isolating transformer having a secondary overcur‐

rent protective device that complies with UL 248 to be installed in the field rated either:

a) max 5 amps for voltages 0 ~ 20 V (0 ~ 28.3 V peak), or

b) 100 / Vp for voltages of 20 ~ 30 V (28.3 ~ 42.4 V peak).

Alternatively, they can be supplied from a Class 2 power supply.

UL Environmental Rating: Enclosure type 1

12 ALLGEMEINE SICHERHEITSHINWEISE

18

8025391.1BHT / 2021-04-19 | SICK

Subject to change without notice

14 Bestimmungsgemäße Verwendung

Die GTB6L ist ein optoelektronischer Reflexions-Lichttaster (im Folgenden Sensor

genannt) und wird zum optischen, berührungslosen Erfassen von Sachen eingesetzt.

Bei jeder anderen Verwendung und bei Veränderungen am Produkt verfällt jeglicher

Gewährleistungsanspruch gegenüber der SICK AG.

15 Betriebs- und Statusanzeigen

Reflexions-Lichttaster mit Hintergrundausblendung.

GTB6L-xxx1x

1

2 3

23

1

Potentiometer: Einstellung der Empfindlichkeit

2

Anzeige-LED gelb: Status Lichtempfang

3

Anzeige-LED grün: Versorgungsspannung aktiv

GTB6L-xxx3x

Sensor ohne Einstellmöglichkeit: Sensor ist eingestellt und betriebsbereit.

2 3

23

16 Montage

Den Sensor unter Verwendung eines geeigneten Befestigungswinkels montieren (siehe

SICK-Zubehörpalette).

Bevorzugte Ausrichtung der Lichtschranke relativ zur Bewegungsrichtung des Objekts

beachten, siehe Abbildung 6.

BESTIMMUNGSGEMÄẞE VERWENDUNG 14

8025391.1BHT / 2021-04-19 | SICK

Subject to change without notice

19

Abbildung 6: Ausrichtung der Lichtschranke relativ zur Objektrichtung

17 Elektrische Installation

Anschluss der Sensoren muss spannungsfrei (U

V

= 0 V) erfolgen. Je nach Anschlussart

sind die folgenden Informationen zu beachten:

– Steckeranschluss: Anschlussbelegung

– Leitung: Aderfarbe

Erst nach Anschluss aller elektrischen Verbindungen die Spannungsversorgung (U

V

> 0 V) anlegen bzw. einschalten.

Erläuterung der Anschlussterminologie:

BN = braun

WH = weiß

BU = blau

BK = schwarz

n. c. = unbeschaltet

Q = Schaltausgang 1

Q = Schaltausgang 2

L+ = Versorgungsspannung (Uv)

M = gemeinsam

L.ON = Hellauswertung

D.ON = Dunkelauswertung

17 ELEKTRISCHE INSTALLATION

20

8025391.1BHT / 2021-04-19 | SICK

Subject to change without notice

ページが読み込まれています...

SICK GTB6L 取扱説明書

SICK GTB6L 取扱説明書

他の言語で

関連論文

その他のドキュメント