Indesit FHR 540 (AN) CN ユーザーガイド

タイプ
ユーザーガイド
Contents
Installation, 2-3
Positioning
Electrical connections
Data plate
Description of the appliance, 4
Overall view
Control panel
Start-up and use, 5
Starting the oven
How to use the timer
Clock with Country Style timer
Cooking modes, 6-7
Cooking modes
Practical cooking advice
Cooking advice table
Precautions and tips, 8
General safety
Disposal
Respecting and conserving the environment
Assistance
Maintenance and care, 9
Switching the appliance off
Cleaning the appliance
Cleaning the oven door
Replacing the light bulb
Operating Instructions
OVEN
GB
English,1
GB CN
FHR 540 CN
2
GB
! Before placing your new appliance into operation
please read these operating instructions carefully.
They contain important information for safe use, for
installation and for care of the appliance.
! Please keep these operating instructions for future
reference. Pass them on to possible new owners of
the appliance.
Positioning
! Keep packaging material out of the reach of
children. It can become a choking or suffocation
hazard. (
see Precautions and tips
).
! The appliance must be installed by a qualified
person in compliance with the instructions provided.
Incorrect installation may cause harm to persons,
animals or may damage property.
Fitting the appliance
Use the appropriate cabinet to ensure that the
appliance functions properly.
• The panels adjacent to the oven must be made of
heat-resistant material.
• Cabinets with a veneer exterior must be assembled
with glues which can withstand temperatures of up
to 100°C.
• to install the oven under the counter (
see diagram
)
and in a kitchen unit, the cabinet must have the
following dimensions:
! The appliance must not come into contact with
electrical parts once it has been installed.
The consumption indications on the data plate have
been calculated for this type of installation.
Ventilation
To ensure good ventilation, the back panel of the
cabinet must be removed. It is advisable to install
the oven so that it rests on two strips of wood, or on
a completely flat surface with an opening of at least
45 x 560 mm (
see diagrams
).
Centring and fastening
Position the 4 tabs on the side of the oven according
to the 4 holes of the outer frame. Adjust the tabs
according to the thickness of the cabinet side panel,
as shown below:
thickness of 20 mm: take off
the removable part of the tab
(
see diagram
)
thickness of 18 mm: use the
first groove, which has already
been set in the factory (
see
diagram
)
thickness of 16 mm: use the
second groove (
see diagram
)
Secure the appliance to the
cabinet by opening the oven
door and putting 4 screws into
the 4 holes of the outer frame.
! All parts which ensure the
safe operation of the
appliance must not be
Installation
595 mm.
595 mm.
24 mm.
545 mm.
5 mm.
567 mm.
23 mm.
593 mm.
45 mm.
560 mm.
547 mm. min.
560 mm.
45 mm.
3
GB
removable without the aid of a tool.
Electrical connections
! Ovens equipped with a three-pole power supply
cable are designed to operate with alternating
current at the voltage and frequency indicated on
the data plate located on the appliance (
see below
).
Fitting the power
supply cable
1. Open the terminal
board by inserting a
screwdriver into the
side tabs of the cover.
Use the screwdriver as
a lever by pushing it
down to open the cover
(
see diagram
).
2. Loosen the cable
clamp screw and
remove it, using a
screwdriver as a lever
(see figure).
3. Remove the wire
contact screws L-N-
, then fasten the wires
under the screw heads,
respecting the colour
code: Blue (N), Brown
(L) and Yellow-Green Verde (
).
Connecting the supply cable to the mains
Install a standardised plug corresponding to the
load indicated on the data plate (
see side
).
The appliance must be directly connected to the
mains using an omnipolar circuit-breaker with a
minimum contact opening of 3 mm installed between
the appliance and the mains, suitable for the load
indicated and complying with current electrical
regulations (the earthing wire must not be interrupted
by the circuit-breaker). The supply cable must not
come into contact with surfaces with temperatures
higher than 50°C.
! The installer must ensure that the correct electrical
connection has been made and that it is compliant
with safety regulations.
Before connecting to the power supply, make sure
that:
The appliance is earthed and the plug is
compliant with the law.
The socket can withstand the maximum power of
the appliance, which is indicated on the data
plate (
see below
).
The voltage must be in the range between the
values indicated on the data plate (
see below
).
The socket is compatible with the plug of the
appliance. If the socket is incompatible with the
plug, ask an authorised technician to replace it. Do
not use extension cords or multiple sockets.
! Once the appliance has been installed, the power
supply cable and the electrical socket must be easily
accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced
by authorised technicians only (
see Assistance
).
! The manufacturer declines any liability should
these safety measures not be observed.
DATA PLATE
Dimensi ons
width cm 43.5
height cm 32
depth cm 41,5
Volume lt. 58
Electrical
connections
voltage: 220-240V ~ 50/60Hz o 50Hz
(see data plate) maximum power
absorbed 2250W
ENERGY LABEL
Directive 2002/40/EC on the label of
electric ovens Norm EN 50304
Ener
g
y con sumption fo r Natural
convection heating mode:
Convection
Declared energy consumption for
Forced convection Class
heating mode: Fan assisted
This appliance conforms to the
following European Economic
Community directives:
- 2006/95/EEC of 12/12/06 (Low
Voltage) and subsequent
amendments;
- 2004/108/EEC of 15/12/04
(Electromagnetic Compatibility) and
subsequent amendments;
- 93/68/EEC of 22/07/93 and
subsequent amendments.
- 2002/96/EC and subsequent
amendments.
4
GB
* Only on certain models
Description of the appliance
Overall view
Control panel
Control panel
GRILL
DRIPPING PAN
GUIDES for the
sliding racks
position 5
position 4
position 3
position 2
position 1
SELECTOR
knob
TIMER
knob *
THERMOSTAT
knob
THERMOSTAT
indicator light
SELECTOR
knob
COUNTRY STYLE
TIMER knob *
THERMOSTAT
knob
THERMOSTAT
indicator light
5
GB
! The first time you use your appliance, heat the
empty oven with its door closed at its maximum
temperature for at least half an hour. Ensure that the
room is well ventilated before switching the oven off
and opening the oven door. The appliance may
produce a slightly unpleasant odour caused by the
burning away of protective substances used during
the manufacturing process.
Starting the oven
1. Select the desired cooking mode by turning the
SELECTOR knob.
2. Select the desired temperature with the
THERMOSTAT knob. See the Cooking advice table for
cooking modes and the suggested cooking
temperatures (
see Cooking Modes
).
3. When preheating is finished, the THERMOSTAT
indicator light will stay on: place the food in the oven.
4. You may do the following during cooking:
- change the cooking mode by turning the SELECTOR
knob.
- change the temperature by turning the
THERMOSTAT knob.
- stop cooking by turning the SELECTOR knob to the
“0” position.
! Never put objects directly on the oven bottom to
avoid damaging the enamel coating.
! Always place cookware on the rack(s) provided.
Cooling ventilation
In order to cool down the external temperature of the
oven, some models are fitted with a cooling fan that
blows out air between the control panel and the oven
door.
! Once the cooking has been completed, the cooling
fan remains on until the oven has cooled down
sufficiently.
Oven light
It goes on when selecting
with the SELECTOR
knob. It stays on when a cooking mode is selected.
How to use the timer *
1. To set the buzzer, turn the TIMER knob clockwise
almost one complete revolution.
2. Turn the knob anticlockwise to set the desired
time: align the minutes shown on the knob with the
indicator on the control panel.
3. The timer operates in minutes: when the selected
time has elapsed, a buzzer will sound.
! The timer does not turn the oven on or off.
Clock with Country Style timer *
How to reset the correct time
The oven must be plugged in.
Pull the knob and turn it anticlockwise until you set
the correct time.
! !
! !
! The programmer is electrically powered, therefore
in the event of a power shortage, it will stop working
for the entire duration of the same. Following this
power failure, the correct time will have to be reset.
Timer Feature
The timer feature allows you to enter a given amount
of time from which the timer begins to count down.
This feature does not turn the oven on or off; it
merely sounds when the time has elapsed.
How to set the timer
Turn the knob anticlockwise until the marker lines up
with the desired time (internal scale), which can be
seen in the “window”.
The time countdown will begin immediately.
To interrupt the timer buzzer, or to use only the clock
feature, set the marker to the symbol.
* Only on certain models
Start-up and use
6
GB
Cooking modes
! A temperature value can be set for all cooking
modes between 60°C and Max, except for
GRILL (recommended: set only to MAX power
level);
GRATIN (recommended: do not exceed 200°C).
TRADITIONAL OVEN mode
Both the top and bottom heating elements will come
on. With this traditional cooking mode, it is best to use
one cooking rack only; if more than one rack is used,
the heat will be distributed unevenly.
MULTI-COOKING mode
All the heating elements (top and bottom), as well as
the fan, will come on. Since the heat remains constant
throughout the oven, the air cooks and browns food
uniformly. A maximum of two racks may be used at
the same time.
TOP OVEN mode
The top heating element comes on. This mode can be
used to brown food at the end of cooking.
GRILL mode
The top heating element comes on. The extremely
high and direct temperature of the grill makes it
possible to brown the surface of meats and roasts
while locking in the juices to keep them tender. The
grill is also highly recommended for dishes that
require a high temperature on the surface: such as
beef steaks, veal, rib steak, filets, hamburgers etc...
Some grilling examples are included in the “Practical
Cooking Advice” paragraph. Always cook in this mode
with the oven door closed.
GRATIN mode
The top heating element, as well as the fan, will
come on. This combination of features increases the
effectiveness of the unidirectional thermal radiation of
the heating elements through forced circulation of the
air throughout the oven. This helps prevent food
from burning on the surface, allowing the heat to
penetrate right into the food. Always cook in this
mode with the oven door closed.
Cooking modes
Practical cooking advice
! Do not place racks in position 1 and 5 during fan-
assisted cooking. Excessive direct heat can burn
temperature sensitive foods.
! In the GRILL and GRATIN cooking modes, place
the dripping pan in position 1 to collect cooking
residues (fat and/or grease).
MULTI-COOKING
Use position 2 and 4, placing the food that requires
more heat on 2.
Place the dripping pan on the bottom and the rack
on top.
GRILL
Insert the rack in position 3 or 4. Place the food in
the centre of the rack.
We recommend that you set the maximum power
level. The top heating element is regulated by a
thermostat and may not always be on.
PIZZA
For best results when cooking pizza, use the
MULTI-COOKING mode.
Use a light aluminium pizza pan. Place it on the
rack provided.
For a crispy crust, do not use the dripping pan
(prevents crust from forming by extending cooking
time).
If the pizza has a lot of toppings, we recommend
adding the mozzarella cheese on top of the pizza
halfway through the cooking process.
7
GB
Cooking advice table
Cooking
modes
Foods
Weight
(in kg)
Rack
position
Pre-
heating
time (min)
Recommended
temperature
Cooking
time
(minutes)
Convection
Oven
Duck
Roast veal or beef
Pork roast
Biscuits (short pastry)
Tarts
1
1
1
-
1
3
3
3
3
3
15
15
15
15
15
200
200
200
180
180
65-75
70-75
70-80
15-20
30-35
Multi-cooking
Pizza (on 2 racks)
Lasagne
Lamb
Roast chicken + potatoes
Mackerel
Plum cake
Cream puffs (on 2 racks)
Biscuits (on 2 racks)
Sponge cake (on 1 rack)
Sponge cake (on 2 racks)
Savoury pies
1
1
1
1+1
1
1
0.5
0.5
0.5
1
1.5
2 and 4
3
2
2 and 4
2
2
2 and 4
2 and 4
2
2 and 4
3
15
10
10
15
10
10
10
10
10
10
15
230
180
180
200
180
170
190
180
170
170
200
15-20
30-35
40-45
60-70
30-35
40-50
20-25
10-15
15-20
20-25
25-30
Top oven
Browning food to perfect cooking - 3/4 15 220 -
Grill
Soles and cuttlefish
Squid and prawn kebabs
Cod filet
Grilled vegetables
Veal steak
Cutlets
Hamburgers
Mackerels
Toasts
1
1
1
1
1
1
1
1
4
4
4
4
3 or 4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
Max
Max
Max
Max
Max
Max
Max
Max
Max
8-10
6-8
10
10-15
15-20
15-20
7-10
15-20
2-3
Gratin
Grilled chicken
Cuttlefish
1.5
1.5
2
2
5
5
200
200
55-60
30-35
8
GB
Precautions and tips
! The appliance was designed and manufactured in
compliance with international safety standards. The
following warnings are provided for safety reasons
and must be read carefully.
General safety
The appliance was designed for domestic use
inside the home and is not intended for
commercial or industrial use.
The appliance must not be installed outdoors,
even in covered areas. It is extremely dangerous
to leave the appliance exposed to rain and
storms.
When handling the appliance, always use the
handles provided on the sides of the oven.
Do not touch the appliance with bare feet or with
wet or moist hands and feet.
The appliance must be used by adults only for
the preparation of food, in accordance with the
instructions outlined in this booklet. Any other
use of the appliance (e.g. for heating the room)
constitutes improper use and is dangerous.
The manufacturer may not be held liable for
any damage resulting from improper, incorrect
and unreasonable use of the appliance.
When the appliance is in use, the heating
elements and some parts of the oven door
become extremely hot. Make sure you don't
touch them and keep children well away.
Ensure that the power supply cable of other
electrical appliances does not come into contact
with the hot parts of the oven.
The openings used for ventilation and dispersion
of heat must never be covered.
Always grip the oven door handle in the centre:
the ends may be hot.
Always use oven gloves to place cookware in the
oven or when removing it.
Do not use aluminium foil to line the bottom of the
oven.
Do not place flammable materials in the oven: if
the appliance is switched on by mistake, it could
catch fire.
Always make sure the knobs are in the “”/“
position when the appliance is not in use.
When unplugging the appliance always pull the
plug from the mains socket, do not pull on the
cable.
Never carry out any cleaning or maintenance work
without having unplugged the plug from the
mains.
In the case of a malfunction, under no
circumstances should you attempt to repair the
appliance yourself. Repairs carried out by
inexperienced persons may cause injury or further
malfunctioning of the appliance. Contact a Service
Centre (
see Assistance
).
Do not rest heavy objects on the open oven door.
The appliance should not be operated by people
(including children) with reduced physical,
sensory or mental capacities, by inexperienced
individuals or by anyone who is not familiar with
the product. These individuals should, at the very
least, be supervised by someone who assumes
responsibility for their safety or receive
preliminary instructions relating to the operation of
the appliance.
Do not let children play with the appliance.
Disposal
Observe local environmental standards when
disposing packaging material for recycling
purposes. Observe existing legislation when
disposing of the old appliance.
The European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances
must not be disposed of in the normal unsorted
municipal waste stream. Old appliances must be
collected separately in order to optimise the
recovery and recycling of the materials they
contain and reduce the impact on human health
and the environment. The crossed out “wheeled
bin” symbol on the product reminds you of your
obligation, that when you dispose of the
appliance it must be separately collected.
Consumers should contact their local authority or
retailer for information concerning the correct
disposal of their old appliance.
Respecting and conserving the
environment
By using the appliance in the hours between late
afternoon and early morning, you can help reduce
the work load placed on electrical companies.
Always keep the oven door closed when using the
GRILL and GRATIN mode to attain best results
and to save energy (approximately 10%).
Regularly check the door seals and wipe clean to
ensure they are free of debris so that they stick
properly to the door and do not allow heat to
disperse.
Assistance
Communicating:
appliance model (Mod.)
serial number (S/N)
This information is found on the data plate located
on the appliance and/or on the packaging.
9
GB
Maintenance and care
Switching the appliance off
Disconnect your appliance from the electricity
supply before carrying out any work on it.
Cleaning the appliance
The stainless-steel or enamel-coated external parts
as well as the rubber seals may be cleaned using a
sponge that has been soaked in lukewarm water
and neutral soap. If these stains are difficult to
remove, use only specialised products. After
cleaning, rinse and dry thoroughly. Do not use
abrasive powders or corrosive substances.
Ideally, the inside of the oven should be cleaned
after each use, when it is still lukewarm. Use hot
water and detergent, rinse and dry with a soft cloth.
Do not use abrasive products.
All accessories - with the exception of the sliding
racks - can be washed like everyday crockery.
! Never use steam cleaners or pressure cleaners on
the appliance.
Cleaning the oven door
Clean the glass part of the oven door using a sponge
and a non-abrasive cleaning product, then dry
thoroughly with a soft cloth. Do not use rough abrasive
material or sharp metal scrapers as these could
scratch the surface and cause the glass to crack. To
clean more thoroughly, you can remove the oven door.
1. Open the oven door fully (
see diagram
).
2. Lift up and turn the small levers located on the
two hinges (
see diagram
).
3. Grip the door on the two
external sides and close it
approximately half way. Unlock
the door by pressing on the
clamps
FF
FF
F, then pull the door
towards you lifting it out of its
seat (
see diagram
).
To replace the door, reverse
this sequence.
Inspecting the seals
Check the door seals around the oven periodically. If
the seals are damaged, please contact your nearest
After-sales Service Centre (
see Assistance
).
We recommend not using the oven until the seals have
been replaced.
Replacing the light bulb
To replace the oven light bulb:
1. Remove the glass cover of the lamp-holder.
2. Remove the light bulb and replace it with a similar
one: Wattage 25 W, cap E 14.
3. Replace the glass cover (
see diagram
).
F
F
安装使用说明书
FHR 540 (AN) CN
内容
安装
安装
电器连接
技术参数
烤箱
外观
控制面板
开始和使用
烤箱使用
如何使用计时器
烹饪模式
烹饪模式
烹饪建议
烹饪建议表
建议
安全
处置
环保
帮助
维护
关闭电器
清洁电器
清洗烤箱门
置换灯泡
安装
将此使用说明书放在安全的地方以备使用。如果烤箱搬动或出
售,可将此说明书和机器一起给使用者。
!仔细阅读此说明书,它包含了安装,使用和安全的重要事项。
安装
!包装材料请远离儿童,以免造成严重和危险的后果。
烤箱的安装必须由合格人员根据说明书来安装,错误的安装将会造
成对人,动物以及财产的损坏。
固定机器
为了让嵌入式烤箱的作用完全发挥,橱柜必须是定制的。
z 邻近的橱柜嵌板必须是用耐热的材料制作。
z 尤其橱柜外部的面板必须承受 100
0
C 以上的温度。
z 如将烤箱安装在橱柜中,必须按照如下尺寸:
目前的安全标准是指一旦烤箱被安装好以后烤箱的任何电子零部件
就不能被接触到了。
数据标牌上已注明安装时的消耗指示。
通风
为了确保足够的通风,橱柜后面的嵌板必须去掉。用剩下的两个木片
安装烤箱是可取的。如果烤箱用连续的,扁的表面,那么必须至少
45x560 毫米。
紧固
为了你的烤箱处于中心位置,烤箱的四周有 4 个标签与柜子周围的 4
个孔是一致的。如果柜子边上的面板:
20 毫米厚:标签的可移动的部分必
须被移动
18 米厚:使用厂家设置的第一个槽。
16 米厚:用第二个槽
为了把烤箱和橱柜固定起来,打开烤箱的
门,用 4 个螺丝插入 4 个孔中,拧紧以便
固定烤箱。
确保烤箱安全操作的所有部件必须通过工具的帮助来移动。
电器连接
烤箱配备的插头是与数据牌上所显示的电压和频率所一致。
适合的电源线
1.打开电路接头板,
用螺丝刀撬动电路接头板盖的突起物,
打开电路接头盖。
2.用螺丝刀松开固定电线的螺丝。
3.为了安装电线,请按以下步骤
拧下电线的夹子螺丝和三个螺丝 L-N-
根据下面的图示紧固电线:(N)(L)
黄绿( )
连接电线到主机
安装标准插头,与资料相一致。当连接电线到插座时,在烤箱和
电源之间安装一个万能的 3 毫米的开着的闸盒。万能闸盒应该根据资
料上的大小来选择(地线不应该被闸盒干扰)。电线必须安置好,不
能超过 50 度。
在作连线前,应先检查以下几点:
z 如果烹饪方法得当,有安全的地线,烤箱的安全就会得到保证。
不断确认地线的功效,如果仍有任何疑问,可以让专业的技术人
员检查系统。对于因为没有地线而造成的烤箱损坏的后果,生产
商不负任何责任。
z 在把烤箱通电源之前,在资料中检查特殊的指示要与你家的电源
相匹配。
z 检查系统的负荷量,插座支持的最大强度,如果你不清楚,请技
术人员来检查
!如果插座和烤箱插头不匹配,通过技术人员换一个合适的插座。
!尤其要确认通过插座的部分的电流是否适合烤箱的接收。
不建议用接的插座或者是额外的,如果不得不使用,记住仅用单一
的或者复合的以保证安全。在这些基础上,决不要超出最大的容量。
插头和插座一定要离的很近
!制造商不对错误的使用而造成的后果承担任何责任。
技术参数
外型尺寸 43.5 cm
32 cm
41.5 cm
容量 58
电源 220/240V50/60 50Hz ; 最大功率 2250w
数据牌 根据电烤箱 2002/40/EC 标准 EN50304
带排风冷却系统的型号:
自然对流状态下的能量消耗
加热模式: 一般烹饪
强制对流状态下申明的能量消耗
加热模式: 风扇助力
不带排风冷却系统的型号:
强制对流状态下的能量消耗
加热模式: 风扇助力
自然对流状态下申明的能量消耗
加热模式: 一般烹饪
该烤箱符合 E.E.C.规程:
-2006/95/EEC 12/12/06(低压)及后来的修正规
则;
-89/336/EEC 03/05/89(电磁兼容性)及后来
的修正规则
-93/68/EEC 22/07/93 及后来的修正规则
-2002/96/EC
烤箱
外观
控制面板
烤箱使用
在初次使用烤箱的时候,我们建议您将自动调温器设置在高温状态,
在烤箱内无任何东西的情况下关闭烤箱门工作半个小时。然后,打开
烤箱门使其通风良好。在初次使用期间你会发现某种气味,这是用来
保护烤箱和烤架的物质挥发的气味。
烤箱开始工作
1.通过调节选择钮来选择理想的烹饪模式。
2.调节温控钮来选择理想的温度可参考烹饪建议表来进行温
度和烹饪模式的选择。
3当预热完成后,温控指示灯持续发亮:可在烤箱内放入食物。
4.烹饪时可做以下工作:
-通过调节选择钮来选择理想的烹饪模式
-调节温控钮来选择理想的温度
-调节选择钮至“0”位置可停止烤箱工作。
!不要直接在烤箱底部放入任何物品以免损坏烤箱外观涂层。
!谨记餐具必须放置在烤箱的格架上。
排风冷却
为了让温度降下来,一些型号装有排风冷却系统,它会在烤箱热的时
候自动工作。当风扇运作时,在烤箱门和控制面板之间会产生气流声。
!烹饪完毕,风扇运作将一直持续到烤箱完全冷却为止。
烤箱灯
旋转旋钮 就打开烤箱灯。当热量在烤箱中持续中,烤箱灯一直亮
着。
如何使用计时器
1 将计时器按钮顺时针旋转到底来设置蜂鸣器。
2 逆时针拨动旋钮来设置理想的时间:控制面板上能看到所需要
的时间。
3 时间以分钟来计时:当到达选择的时间时,蜂鸣器会有响声。
!计时器不能开或关闭烤箱。
带时钟的计时器
如何设置当前时间
烤箱必须通电。
按下旋钮,逆时针转动,直到正确时间。
程序是电子控制,在动力不足的情况下,将会停止工作。之后,
确的时间必须重新设置。
计时器特点
计时器允许您在设定的时间里工作,特点是当时间结束时,烤箱不会
启动或关闭,只是有声音提醒。
如何设置计时器
逆时针拨动旋钮到在视窗上能看到的想要的时间上(内部刻度)
时间计数将立刻开始
中断计时器的声音或者仅用时钟,设置标记为 的旋钮
烹饪模式
烹饪模式
温度可设置在 60
0
C 和最大值之间除了
炙烤:建议设置在最高温度
排风扇助力炙烤:建议不超过 200
0
C
一般烹饪模式
选中该模式,上部和下部的加热元器件同时工作,食物可以上下受热,
当用一般烹饪模式烹饪时,仅仅用一个滴油盘或者是烹饪架,否则就
会受热不均匀。
多功能烹饪模式
选中该模式,上部和下部的加热元器件包括风扇将同时工作
因为持续不断的热量均匀的通过烤箱,烤箱可以覆盖食物的整个表
面。此中烹饪模式两个格架能够同时被使用。
顶部加热
顶部的热量持续。
这个模式可以在烹饪最后用于将食物烤脆。
炙烤
顶部中央的热量持续。具有极端高的和直接温度的电烤架能保证使食
物整个表面均匀烘烤,而又能锁住水分从而保持食物的鲜嫩。强力推
荐电烤架用于需要表面高温加热的食物:如牛排,小牛肉,排骨,汉堡
包等......一些烧烤的例子请详见"烹饪技巧"一节。烹饪时切记关紧
烤箱门。
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Indesit FHR 540 (AN) CN ユーザーガイド

タイプ
ユーザーガイド

他の言語で