QCY蓝牙耳机售后服务
三包凭证
产品型号
订单编号
用户信息：
产品信息：
用户姓名
联系电话
用户地址
退换货原因
销售单位
购买信息：
FAQ
折页线
1.Q：怎么只能听一个？
A：将两只耳机放回充电舱，重新取出查看是否恢复双耳模式，
如未恢复重置耳机即可解决。
2.Q：手机提示无法连接怎么解决？
A：将手机上的配对记录删除，删除后重新进行搜索信号连接
即可。
3.Q：怎么听歌/通话没声音？
A：安卓在手机连接记录的右边有个设置图标，点击进入，将
两个音频选项取消勾选重新选择，苹果在设置通用辅助功
能进入音频通话方式，选择自动，如本来就是自动，就换其
他选项，然后选择自动，如未恢复，删除配对记录重新尝试。
4.Q：怎么视频/游戏有延迟？
A：受使用环境、网络、手机编解码速度的影响，会造成手机传
送音频数据到耳机时造成不同程度的延迟。
5.Q：怎么卡顿/断续？
A：亲，如果使用时有大量的 Wi-Fi 连接、4G 信号、大功率电器
等等产生干扰，可能会出现卡顿、断续的情况，换个环境或
者重新配对连接下就可以解决了。
单耳机使用模式
打开手机蓝牙搜索配对名，选择QCY_T10点击连接。
1. 耳机在关机状态下，任一耳机长按触控板约5秒，进入配对
状态（红绿灯交替闪烁）
2.
3. 连接完成
给耳机充电
三方通话接听与切换通话:
耳机放入充电盒中，即关机进入充电状态，充电时红灯长亮,
充满电后绿灯常亮1分钟后熄灭
给充电盒充电
连接USB充电线充电，充电盒充电时红灯常亮，充满电后绿
灯常亮
产品参数
型 号：In2024 配对名：QCY-QT10
蓝牙版本：V5.0 待机时间：约80小时
充电时间：约1.5小时 音乐时间：约3.5小时
通话时间：约3小时 通信距离：10米（无障碍环境下）
电池类型：聚合物锂离子电池
耳机电池容量：3.7V 40mAh
充电盒电池容量：3.7V 600mAh
充电盒输入参数：5V 600mA
支持协议：HSP/HFP/A2DP/AVRCP
QCY-T10
TWS真无线蓝牙耳机
(此方法用于无法正常连接的情况）
恢复出厂设置方法：
1. 在手机蓝牙设备列表中，找到QCY-T10，点击进入设置，
选择忽略或取消配对。
2. 取出两只耳机，同时长按8秒，直至红灯长亮2秒后熄灭，
表示调为关机状态。
3. 重新同时长按两只耳机大约10秒，直至红绿灯同时闪3次，
红灯闪1次，表示耳机重置成功。
*恢复出厂后用首次配对的方法连接即可正常使用
首次配对方法：
1. 取出两只耳机
2. 刷新手机蓝牙设备列表，点击配对QCY-T10，完成配对
*耳机取出会自动开机，若未自动开机，请充电后重新尝试
切换设备配对方法：
1. 关闭A手机蓝牙，耳机自动断开进入配对模式
2. 刷新B手机蓝牙设备列表，点击配对QCY-T10，完成配对
*不支持同时连接两台手机，下次开机默认回连上次配对的
手机
使用场景 状态 操作/现象 LED
TWS相互配对
开机
关机
清除配对
接听电话/结束电话
拒接来电
声控
游戏模式开关
音乐暂停/播放
切换上下曲
关机状态下，且未有配对记
录前提下（首次使用 ） 长按触控板键1秒开机自动进入配对状态 红绿灯交替闪
关机状态下长按5秒进蓝牙
配对模式 双击触控板键一次进入TWS配对搜索
红绿灯同时双闪，连
上左耳进入配对状
态，右耳灭灯
关机状态下 长按触控板键2秒 绿灯常亮1秒
充电状态下 从充电盒拿起，耳机开机 绿灯常亮1秒
任意状态
长按触控板键5秒（未连接设备是可联动关机） 红灯常亮2秒
放入充电盒，关机 红灯常亮
关机模式下 长按触控板键10秒清除与手机的配对信息
红绿灯同时闪3次后
关机（左右耳机同时
关机模式下长按10秒
清除配对过程 有一边
LED灯不闪， 红绿灯
同时闪3次）
来电响铃中/通话中 双击触控板 \
来电响铃中 长按触控板键约2秒(要松手) \
在已连接状态 左边三击触控板 \
音乐/视频/游戏过程中 右边三击触控板 开/关 游戏模式 \
音乐状态下 双击触控板 \
音乐状态下 左耳机长按2秒上一曲，右耳机长按2秒下一曲 \
音
语音提示
TONE
\
TONE音
TONE音
\
TONE音
TONE音
TONE音
开启：嘟嘟
关闭：嘟嘟嘟
\
\
功能介绍
认识耳机 双耳机配对 恢复出厂设置
更多操作方法请关注二维码
佩戴耳机
蓝牙 QCY-T10
忽略此设备
忽略此设备
忽略设备
取消
设置 蓝牙
忽略此设备
蓝牙
QCY-T10 已连接
我的设备
已连接
1.将耳帽斜向下轻轻塞入耳道，以轻摆头部耳机不晃动
为宜。
2.通话时，将耳机麦克风朝向嘴部可使通话更清晰。
耳机连接手机A 手机B来电，双击接听来电，通话中，
手机C同时来电，再次双击，系统自动保持手机B的通
话，接通手机C。
长按多功能按键可以随意切换2台手机之间的通话。
三方通话拒接第二个来电：耳机连接手机A，手机B来
电，双击接听来电，通话中；手机C同时来电,长按多
功能键，拒接手机C，继续与手机B通话。
售后服务与支持
保修期:
自产品购买之日起12个月(请妥善保管购买凭证)
免费服务:
在产品保修期内，凡属产品本身质量引起的故障，请用户凭购买凭证与经销商取得联系
以享受售后服务。
如有任何产品损害或瑕疵非可归责于产品质量本身，则不在保修范围内。有下列情形者
不属于保修范围内：
1、因天灾、地震、雷击、异常电压、环境因素而发生之故障或毁损的。
2、自行或委托未经原厂授权维修之厂商拆卸、改装或更换非原厂零件。
3、未按使用手册操作或因人为使用不当而造成损坏者，如产品浸水、腐蚀、掉落、挤压或
露在异常温湿度环境下。
QCY蓝牙耳机售后服务承诺:严格按照《中华人民共和国消费者权益保护法》、《中华
人民共和国产品质量法》实行售后三包服务，服务内容如下:
在三包有效期内，您可凭购物凭证依照本规定享受免费的修理、更换、退货的权利。
1、自您购买之日起7日内，本产品出现故障，经由QCY售后服务中心确定为产品质量问
题，可享受修理、更换、退货的服务。
2、自您购买之日15日内，本产品出现故障，经由QCY售后服务中心确定为产品质量问题
，可享受修理或更换的服务。
3、自您购买之日起12个月内，本产品出现故障，经由QCY售后服务中心确定为产品质量
问题，可享受修理的服务。
Warranty Card FCC Statement
折页线
Mono Mode
LED
L M S
Mic
Pogo Pins
Touch bar
Tuning Hole
QCY-T10
TWS Bluetooth Earbuds
(Try the following steps to fix connectivity issue)
Set to factory：
1. On cellphone, search for QCY-T10, tap and choose ignore
or cancel pairing.
2. Pick up two earbud, keep touching both bars for 8s or
until LEDs glow red for 2s to power off.
3. Keep touching both bars for 10s or until LEDs blink red
and green 3 times then blink red to set earbuds to factory.
*Please refer "First Time Pairing" to connect after factory
setting.
First Time Pairing：
1. Pick up both earbuds.
2. On cellphone, search for QCY-T10and tap to connect.
*Once paired earbuds will auto power on upon picking
up from the case. If earbuds fail to auto power on, please
charge them and try again.
Switch Paired Device：
1. Turn off phoneA's Bluetooth faculty and earbuds will
auto disconnect and enter into pairing mode.
2. On phoneB, search for QCY-T10and tap to connect.
*Multi-point connection is not available. Earbuds will
auto reconnect to phoneB upon powering up again.
Functions Current status Operation/result LED
Entering TWS
Mode
Power-on
Power-off
Remove
connectivity record
Answer/end call
Ignore call
Voice assistant
Gaming mode
Music pause/play
Forward/Backward
Power-off with no
connectivity record
Keep touching the bar for 1s to power on
and earbud will auto enter pairing mode
LED blinks
red and green
Power off then keep
touching the bar for 5s to
enter pairing mode
Double touch the bar to enter TWS mode
LEDs blinks red and
green then right LED
turns off
Power-off Keep touching the bar for 2s LED glows green
for 1s
Charging Pick up earbuds from the case LED glows green
for 1s
Power-on
LED glows red for 2s
Pop earbud into the case to power off LED glows red
Power-off Keep touching the bar for 10s to remove
connectivity record
Incoming call/calling Double touch the bar \
Incoming call Keep touching the bar for 2s \
Connected Triple touch left bar \
Playing/gaming
Triple touch right bar to switch on/off
gaming mode
\
Music playing Double touch the bar \
Music playing
Keep touching right/left bar to skip track
forward/backward
\
Prompt
TONE
\
TONE
TONE
\
TONE
TONE
TONE
On: two beeps
Off: three beeps
\
\
Function Introduction
Overview
Choose Your Eartips
How to Pair Factory Setting How to Wear
Bluetooth QCY-T10
忽略此设备
Forget This Device
Forget Device
Cancel
Settings Bluetooth
忽略此设备
Bluetooth
QCY-T10 Connected
MY DEVICES
Connected
1. Power off earbud then touch earbud for 5s to enter pairing
mode ( LED blinks red and green )
2. On cellphone, search for QCY_T10
3. Connected
Charging Earbud
Push earbud into the case to charge. LED will glow solid red
when charging and turn to green for 1 minute once top up.
Charging the Case
Charge the case via USB cable. LED will glow solid red
when and charging turn green once top up.
Product Parameters
Warranty Period
12 months after you purchase this item.(or you may
inquire your local shopper for more details.)
Free Service:
Supposing any defects caused by quality issues occur
within the warranty period, please take this warranty
card and purchase receipts to your distributor for free
exchange service.
Free exchange service will not be accessed under
following circumstances：
1. Damages caused unauthorized disassembly.
2. Defects or physical damages caused by leaking or
dropping off.
3. Damages by act of God.Supposing your item is within
any damages or defects except the above circumstances,
please return to us or your distributor for free repairing.
Model Number:
Date of Purchasing:
User's Phone:
User's Name:
User's Address:
Shop's Name:
Shop's Address:
Comments:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
Tips
1. Before using the headset, please read the manual
carefully and keep it for future references.
2. The headset need to be fully charged prior to first-time use.
3. If the headset is left unused for over two weeks, please
recharge it periodically.
4. Please use the chargers made by qualified manufacturer.
5. If the headset cannot be found by your phone, please check
whether it is in pairing mode; if left unconnected for a long
while, the headset will exit pairing mode, please re-enter
the mode; if a procedure error of your phone occurs, reboot
it; if a procedure error of the headsetoccurs, reboot or reset it.
Caveats
1. Never disassemble or modify your headset for any
reasons to avoid any damages and danger.
2. Do not store the headset in extreme temperatures (under
0℃ or over 45℃).
3. Avoid using the indicator close to the eyes of children or
animals.
4. Do not use this headset during a thunderstorm to avoid
irregular function and increased risk of electricshock.
5. Do not use harsh chemicals or strong detergents to
clean the headset.
6. Keep the headset dry.
Model:In2024 Pairing name: QCY-QT10
Bluetooth version: V5.0 Stand time: approx. 80hr
Charging time: approx. 1.5hr Music time: approx. 3.5hr
Talking time: approx. 3hr
Operation range: 10m(with no obstacle)
Battery type: li-ion
Battery capacity(earbud):3.7V 40mAh
Battery capacity(charging case):3.7V 600mAh
Input parameter(charging case):5V 600mA
Bluetooth profiles: HSP/HFP/A2DP/AVRCP
Please try medium eartips first as they fit most people.
LEDs blinks red and green 3
times then earbud turns off(if
power off both earbuds,
then keep touching both bars
for 10s to remove
connectivity record. During
the course, only one LED
blinks at first, then both LEDs
start to blink red and green
for 3 times)
Keep touching the bar for 5s to power off earbud(two earbuds
will power off, if earbuds are not connected to device)
1.Rotate earbud and pop it into your ear then shake
head to check wearing stability.
2.Please adjust mic towards your mouth to gain better
calling experience.
Three-way Calling & Switch
Earphones are connected with phoneA. Double press
MFB to answer incoming call from phoneB. If another call
is coming from phoneC in sync, double press MFB to put
the first call on held while activating the second call.
Hold MFB to switch between active call and held call.
Ignore the second call in three-way calling: earphones are
connected with phoneA. Double press MFB to answer
incoming call from phoneB. If another call is coming from
phoneC in sync, hold MFB to ignore the second call while
keeping the first call.
Model: In2024 CMIIT ID: xxxxxxx FCC ID: xxxxxxx
Model: In2024 CMIIT ID: xxxxxxx
80克哑粉纸
T10 说明书
30.001.001457
QCY T10中英文说明书,成型尺寸：80×110mm,80g哑粉纸,双面印刷
FCC ID: RDR-IN2024R
FCC ID: RDR-IN2024L
/