Yealink Yealink MeetingEye 600 Video Conferencing Endpoint (EN,CN) V43 クイックスタートガイド
- タイプ
- クイックスタートガイド
Yealink MeetingEye 600 Video Conferencing Endpoint Quick Start Guide
V43
Yealink Network Technology CO., LTD
English | 简体中文
1
Package Contents
3m
Ethernet CableAAA Battery×2MeetingEye 600
1.8m
HDMI Cable
(for the display device)
Cable Tie×5
Quick Start Guide
We recommend that you use the accessories provided or approved by Yealink. The use of
unapproved third-party accessories may result in reduced performance.
Use the Yealink original power adapter (48V/0.7A) to charge the endpoint only. The use of the
third-party power adapter may cause the damage to the endpoint.
Put the magnet rings on the HDMI cable to prevent electromagnetic interference.
Endpoint Installation
Mounting Bracket
and Accessories
Power Adapter
CTP20
Optional Accessories
WPP20 Wireless
Presentation Pod
Bluetooth Wireless
Microphones×2
Wireless Sharing Package Touch Panel Package Microphone Package
×4
×2
×2
VCR20
Remote Control
Put on a Flat Surface
TV TV
Silicone Pad×2
2
Wall Mounting
Use the bracket to mount your endpoint on a wall. The mounting height affects your camera view.
The recommended height is 1.1m above the ground.
Mount the MeetingEye 600 below the TV when
the mounting height of the TV is higher than
120cm.
Mount the camera above the TV when
the mounting height of the TV is lower
than 120cm.
TV
TV
Step1Assemble the mounting bracket
Hole depth: 30mm
Hole diameter: 6mm
118mm
T4×30 screws
Step2Mountthe MeetingEye 600 to the wall
H>120cm
H<120cm
Placing MeetingEye 600
Mount on a Wall
10cm
3
3. Adjusting the Camera Tilt
15°
15°
4
5
3
4
Remote Control Cable Ties Installation
Endpoint Connections
1.8m
HDMI
Cable
3m Ethernet Cable
Display
Power Adapter
For more information on WPP20 wireless
presentation pod, refer to Yealink WPP20
Wireless Presentation Pod Quick Start
Guide.
PC
Wireless Content Sharing
WPP20
Wireless Presentation Pod
CTP20
5
Network Environment
Bandwidth Requirements
Both downlink bandwidth and uplink bandwidth should meet above requirements.
The bandwidth mentioned above is based on a video call. In order to ensure better call quality, we
recommend using 4Mbps bandwidth.
Network Deployment
Choose Cloud deployment or traditional deployment according to your need.
Cloud Deployment
Cloud deployment does not require complex network settings. You only need to get account information
from your system administrator, and log into the video conference platform.
Do the following to log into the video conference platform via remote control:
1. Select More->Login->Advanced->Account(Default Admin Password:0000)->Video Conference
Platform.
2. Enable Cloud Account.
3. Select the desired platform from the pull-down list of Platform Type.
4. Configure the desired platform and log in.
Video Resolution Recommended Bandwidth
4Kp30/1080p60 4Mbps
People 1080p60+Content 1080p60 4Mbps
Do one of the following to deploy the endpoint:
Option1: Assign a static public IP address to your endpoint.
Option2: If you deploy the endpoint in an Intranet (behind the firewall), assign a static private IP
address to it and configure port mapping on the firewall.
Option3: Deploy the endpoint using intelligent traversal. You only need to assign a private IP
address to your endpoint. Make sure this private IP address can access the public network.
Only outbound calls are available when using this method.
Traditional Deployment
Configure a Static IP
The following introduces how to use the remote control to configure a static IPv4 address:
1. Select More->Setting->Network->Wired Network (Default Admin Password:0000).
2. Select IPv4 from the pull-down list of IP Mode.
3. Select IPv4, and then press OK key.
4. Disable DHCP.
5. Enter the IP address, subnet mask, gateway and DNS information in corresponding fields.
6. Save the change.
The screen prompts “Reboot now?”
.
7. Select
OK
to reboot the
endpoint
.
6
Troubleshooting
Connectivity Testing
After installation and deployment, you can test the endpoint by dialing the Yealink Demo Room
(117.28.251.50 or 117.28.234.45 ). If you can’t dial out successfully, please contact your IT
administrator to check the network.
Configuring Static NAT
If you do not use Cloud platform and deploy your endpoint in an Intranet, and you have configured port
mapping on the firewall or gateway, but you find that local endpoint appears black screen and you
cannot hear any sound when you call Yealink Demo or other endpoints. The most likely reason is that
the firewall or gateway in your environment does not support the ALG feature. In this situation, please
take the following actions so that the static NAT feature on the endpoint can solve this problem.
To configure static NAT via the remote control:
1. Select More->Network->Wired Network (Default Admin Password:0000)->NAT/Firewall.
2. Select Automatic from the pull-down list of Type, the endpoint will obtain public IP address
automatically.
3. If the endpoint does not obtain a public IP address automatically, select Manual Settings from the
pull-down list of Type, and then enter the public IP address in the Public IP Address field.
4. Save the change.
P
ort
Function
H.323 signal
SIP（ optional ）
Audio & Video media stream
Web management（ optional ）
Protocol Type
UDP/TCP
5060-5061
443
50000-51000
1719-1720
TCP/UDP
TCP/UDP
TCP
When you use intelligent traversal to deploy your endpoint, you have to open following ports on
your firewall if they are restricted.
It is recommended that you forward the web management port(443/TCP) to the public network,
so that you can manage the endpoint remotely.
P
ortFunction
H.323 signal
SIP（ optional ）
Audio & Video media stream
Protocol Type
UDP/TCP
TCP/UDP
TCP/UDP
50000-51000
5060-5061
1719-1720
Configure Port Mapping
If you deploy the endpoint in an Intranet, you must forward the following ports to the public network on
the firewall, so that your endpoint can receive a public-to-private call.
包装清单
VCR20遥控器 7号电池x2 MeetingEye 600主机 3米网线
1.8米HDMI线
（用于接显示设备）
此为A级产品。在生活环境中，该产品可能会造成无线电干扰。在这种情况下，可能需要用户对干扰采取
切实可行的措施。
我们推荐使用由Yealink提供或经Yealink认可的配件和线缆，使用未经认可的第三方配件和线缆可能会
导致性能的下降。
使用HDMI线前，请套上磁环用于抗电磁干扰。
7
MeetingEye 600
快速入门指南
MeetingEye 600
最佳部署实践方案
蓝牙无线麦×2
CPW90-BT蓝牙无线麦克风套件
CTP20
无线辅流套件
WPP20 无线传屏助手
触控平板套件
可选配件
安装终端
平放安装
TV TV
束线带x5
支架配件
（用于安装主机）
电源适配器
×4
×2
×2
硅胶垫x2
8
2. 墙装
螺丝规格：T4×30
打孔直径： 6mm
打孔深度： 30mm
118mm
步骤1：安装支架
步骤2：墙装
使用支架将终端安装在墙上。 安装高度会影响你的视野，建议的高度为离地面1.1m。
当电视高度高于120cm时，终端安装
在电视下方。
当电视高度低于120cm时，终端安装
在电视上方。
放置MeetingEye 600
墙装
TV
TV
H>120cm
H<120cm
10cm
9
3. 调整倾斜角度
15°
15°
4
5
3
连接终端
3米网线
你可以选购无线辅流配件用于演示。
无线投屏
10
WPP20无线传屏助手
想要了解WPP20无线传屏助手的详细信息，请参阅亿联WPP20无线
传屏助手快速入门指南。
PC
安装遥控器电池
1.8米
HDMI
线
电源适配器
Display
CTP20
4Kp30/1080p60 4Mbps
4Mbps人像1080p60+内容1080p60
建议带宽需求
使用束线带
网络快速部署
网络带宽需求
网络部署方案
你可以使用云服务方式或传统方式部署终端。
云服务方式部署
云服务方式部署无需复杂的网络配置，登录云平台就可以实现各会场间的互联互通。账号信息请从管理员处
获取。
通过遥控器登录平台：
1. 选择更多 ->登录 ->高级设置 ->账号信息（默认密码：0000）->视频会议服务平台。
2. 开启云账号。
3. 从登录平台下拉框中选择你想要登录的平台。
4. 填写平台登录的相关信息并登录。
11
终端所需网络带宽需求为上下行带宽需求，网络的上行带宽及下行带宽均需要满足需求。
以上带宽需求为通话的带宽需求，为了保证更好的通话效果，我们推荐使用到4Mbps的带宽。
传统方式部署
部署会场
传统方式部署会议电视终端的场景主要有以下三种：
场景一
：如果你将终端直接部署在公网，请为其设置一个固定的公网IP地址。
场景二
：如果你将终端部署在内网(防火墙后)，除了其设置一个固定的内网IP地址之外，还需要在防火
墙上设置端口映射。
场景三
：采用智能穿透方式进行部署，仅需为终端分配一个可访问公网的IP地址即可。使用该种方式
时终端只能呼出不能呼入。
12
设置固定IP地址
以下介绍如何通过遥控器为终端配置一个固定的IPv4地址：
1. 选择
更多 ->设置->网络详情->有线网络
（默认密码：0000）。
2. 从IP模式下拉框中选择IPv4。
3. 按遥控器的上下方向键选择
IPv4
，再按OK键。
4. 禁用
DHCP
。
5. 在相应的区域中输入：IP地址、子网掩码、网关、DNS主服务器和DNS备份服务器。
6. 按遥控器的上下方向键选择保存，再按OK键。
显示器的液晶屏幕提示【需要重启系统使配置生效，是否立即重启？】
7. 选择确认重启终端。
1719-1720
5060-5061
50000-51000
443
UDP/TCP
TCP/UDP
TCP/UDP
TCP
H.323 信令
SIP信令（可选）
音视频媒体流
网页管理（可选）
描述 端口 类型
设置端口映射
如果你将终端部署在内网，您需要在防火墙上将以下端口映射至公网。终端才可以正常接听来自公网的
呼叫：
采用智能穿透方式部署时，如果你的网络有端口限制，需要开放以下端口权限
建议会场将网页管理端口（443/TCP）映射至公网，以便其他会场可以远程管理。
1719-1720
50000-51000
UDP/TCP
TCP/UDP
TCP/UDP
H.323 信令
SIP信令（可选）
音视频媒体流
描述 端口 类型
5060-5061
故障排查
连通性测试
完成终端的安装部署后，你可以拨打Yealink Demo环境（117.28.251.50或117.28.234.45）来测试终
端是否工作正常，如果无法呼通Demo环境，请联系网络管理员检查你的内部网络是否通畅。
配置静态NAT功能
如果你将终端部署在内网(防火墙后)，并且已在防火墙或网关上配置了端口映射，当跨公网呼叫其他
会场的终端或Yealink Demo时, 本地出现黑屏无声的问题，极有可能是因为本会场网络环境中的防
火墙或者网关不支持ALG功能，要解决这个问题使用遥控器开启终端上的静态NAT功能。
1. 选择
更多->网络详情->有线网络
（默认密码：0000）-
>
NAT/防火墙。
2. 从类型下拉框中选择自动，终端将自动获取当前网络的公网IP地址。
3. 如果终端未能自动获取到公网IP地址，你可以在类型下拉框中选择手动，然后在公网IP地址
区域输入当前网络的公网IP地址。
4. 按遥控器的上下方向键选择保存，再按OK键保存当前配置。
联系视频客服
使用会议电视终端设备过程遇到无法解决的问题时，你可以联系视频客服解决。
1. 选择
更多->设置->诊断
-
>
视频客服。
Regulatory Notices
Operating Ambient Temperatures
Operating temperature: +32 to 104°F (0 to 40°C)
Relative humidity: 5% to 90%, noncondensing
Storage temperature: -22 to +160°F (-30 to +70°C)
Warranty
Our product warranty is limited only to the unit itself, when used normally
in accordance with the operating instructions and the system environment.
We are not liable for damage or loss resulting from the use of this product,
or for any claim from a third party. We are not liable for problems with
Yealink device arising from the use of this product; we are not liable for
financial damages, lost profits, claims from third parties, etc., arising from
the use of this product.
Explanation of the symbols
DC symbol
is the DC voltage symbol.
WEEE Warning symbol
To avoid the potential effects on the environment and human health
as a result of the presence of hazardous substances in electrical and
electronic equipment, end users of electrical and electronic
equipment should understand the meaning of the crossed-out wheeled bin
symbol. Do not dispose of WEEE as unsorted municipal waste and have to
collect such WEEE separately.
Restriction of Hazardous Substances Directive (RoHS)
This device complies with the requirements of the EU RoHS Directive.
Statements of compliance can be obtained by contacting [email protected].
Safety Instructions
Save these instructions. Read these safety instructions before use!
General Requirements
Before you install and use the device, read the safety instructions
carefully and observe the situation during operation.
During the process of storage, transportation, and operation, please
always keep the device dry and clean, avoid collision and crash.
Please attempt not to dismantle the device by yourself. In case of any
discrepancy, please contact the appointed maintenance center for repair.
Please refer to the relevant laws and statutes while using the device.
Legal rights of others should be respected as well.
Environmental Requirements
Place the device at a well-ventilated place. Do not expose the device
under direct sunlight.
Keep the device dry and free of dusts.
Do not place the device on or near any inflammable or fire-vulnerable
object, such as rubber-made materials.
Keep the device away from any heat source or bare fire, such as a candle
or an electric heater.
Operating Requirements
Do not let a child operate the device without guidance.
Do not let a child play with the device or any accessory in case of
accidental swallowing.
Please use the accessories provided or authorized by the manufacturer
only.
The power supply of the device shall meet the requirements of the input
voltage of the device. Please use the provided surge protection power
socket only.
Before plugging or unplugging any cable, make sure that your hands are
completely dry.
Do not spill liquid of any kind on the product or use the equipment near
water, for example, near a bathtub, washbowl, kitchen sink, wet
basement or near a swimming pool.
During a thunderstorm, stop using the device and disconnect it from the
power supply. Unplug the power plug and the Asymmetric Digital
Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid
lightning strike.
If the device is left unused for a rather long time, disconnect it from the
power supply and unplug the power plug.
When there is smoke emitted from the device, or some abnormal noise
or smell, disconnect the device from the power supply, and unplug the
power plug immediately.
Contact the specified maintenance center for repair.
Do not insert any object into equipment slots that is not part of the
product or auxiliary product.
Before connecting a cable, connect the grounding cable of the device
first. Do not disconnect the grounding cable until you disconnect all other
cables.
Cleaning Requirements
Before cleaning the device, disconnect it from the power supply.
Use a piece of soft, dry and anti-static cloth to clean the device.
Keep the power plug clean and dry.
Troubleshooting
The unit cannot supply power to device other than Yealink device.
There is a bad connection with the plug.
1. Clean the plug with a dry cloth.
2. Connect it to another wall outlet.
The usage environment is out of operating temperature range.
1. Use in the operating temperature range.
The cable between the unit and the Yealink device is connected incorrectly.
1. Connect the cable correctly.
You cannot connect the cable properly.
1. You may have connected a wrong Yealink device.
2. Use the correct power supply.
Some dust, etc., may be in the port.
1. Clean the port.
Contact your dealer or authorized service facility for any further questions.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following
two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
IC Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) this device may not cause interference; and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device. CAN ICES-3(B)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le
fonctionnement.NMB-3(B)
Radiation Exposure Statement
This equipment complies with FCC and IC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator and your body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps
qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé et
actionné avec une distance minimum de 20 centimètres entre le radiateur et
votre corps.
Contact Information
YEALINK NETWORK TECHNOLOGY CO.,LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R. C
YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Netherlands
YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.
999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA
Made in China
About Yealink
Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware, guides, FAQ, Product documents, and more. For better service,
we sincerely recommend you to use Yealink Ticketing system (https://ticket.yealink.com) to submit all your technical issues.
Yealink is a global leading provider of enterprise communication and collaboration solutions, offering video conferencing service to
worldwide enterprises. Focusing on research and development, Yealink also insists on innovation and creation. With the outstanding
technical patents of cloud computing, audio, video and image processing technology, Yealink has built up a panoramic collaboration
solution of audio and video conferencing by merging its cloud services with a series of endpoints products. As one of the best
providers in more than 140 countries and regions including the US, the UK and Australia, Yealink ranks No.1 in the global market
share of SIP phones shipments.
YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.
Web: www.yealink.com
Copyright
©2020 YEALINK(XIAMEN) NETWORK
TECHNOLOGY CO.,LTD
.All rights reserved.
430104001316
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
Yealink Yealink MeetingEye 600 Video Conferencing Endpoint (EN,CN) V43 クイックスタートガイド
- タイプ
- クイックスタートガイド
他の言語で
関連論文
-
Yealink Yealink MeetingEye 400 Video Conferencing Endpoint (EN,CN) V43 クイックスタートガイド
-
-
-
-
-
Yealink WPP20 クイックスタートガイド
-
-
-
-
Yealink RingCentral A20 ユーザーガイド
