iRobot J7 取扱説明書

Owner’s Guide

使用手冊

่�ือการใ้งาน

사용 설명서

j7

Robot Vacuum

掃地機器人掃地機器人

่�นยน์ู่� น่�นยน์ู่� น

진공 로봇청소기

EN

This is the safety alert symbol. It is used to alert you to potential physical injury hazards.

Obey all safety messages that follow this symbol to avoid possible injury or death.

WARNING: When using an electrical appliance, basic precautions should always be followed,

including the following:

WARNING: To reduce the risk of injury or damage, read and follow the safety precautions when

setting up, using and maintaining your robot.

This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance by a person responsible for

their safety. Children should be supervised to ensure that they do not play with the appliance.

Safety information

Important safety instructions

READ ALL INSTRUCTIONS BEFORE USE

SAVE THESE INSTRUCTIONS

Risk of electric shock Class II equipment Read operator’s

manual

Risk of ﬁre

Caution

For indoor use only Keep out of reach of

children

General symbol for

recycling

Rated power

input, d.c.

Rated power

output, d.c.

Separate Supply Unit

Rated power

input, a.c.

This Owner’s Guide includes information for regulatory model(s): RVE-Y1, ADI-N1

Class III equipment

EN

• Clean cli sensors for build-up.

• If the room to be cleaned contains equipment, such as a stove,

fan, portable heater or humidiﬁer, remove the equipment before

operation. There is a risk of injury, accident or malfunction if the

robot comes in contact with and pushes the equipment.

• This robot is intended for dry ﬂoor use only. Do not use this

device to clean up spills. Do not allow your robot or charging

station to become wet.

CAUTION

• Do not operate the robot in areas with exposed electrical

sockets in the ﬂoor.

• Do not use this device to pick up sharp objects, glass or

anything that is burning or smoking.

• Be aware that the robot moves on its own. Take care when

walking in the area that the robot is operating in to avoid

stepping on it or tripping over it.

• If the device passes over a power cord and drags it, there is

a chance an object could be pulled o a table or shelf. Before

using this device, pick up objects like clothing, loose papers,

pull cords for blinds or curtains, power cords and any fragile

objects. Extinguish candles. Turn o portable heaters.

• Perform the required maintenance as per the Owner’s Guide to

ensure safe operation of the robot and charging station.

• If the robot is operating on a ﬂoor with stairs, please remove any

clutter from the top step.

NOTICE

• Do not place anything on top of your robot or charging station.

• Failure to maintain cleanliness of charger contacts could result

in loss of ability for the robot to charge the battery.

GENERAL

WARNING

• Your robot comes with a region-approved power supply cord

and is designed to be plugged into a standard household AC

power socket only. Do not use any other power supply cord. For

replacement cords, please contact Customer Care to ensure

proper selection of country-speciﬁc power supply cord.

• Do not open your robot or charging station other than instructed

in the Owner’s Guide. There are no user serviceable parts inside.

Refer servicing to qualiﬁed service personnel.

• Risk of electric shock, use indoors in dry location only.

• Do not handle your robot or charging station with wet hands.

• Do not use unauthorised chargers. Use of an unauthorised

charger could cause the battery to generate heat, smoke, catch

ﬁre or explode.

• Your robot is not a toy. Small children and pets should be

supervised when your robot is operating.

• Do not sit or stand on your robot or charging station.

• Store and operate your robot in room-temperature

environments only.

• If the room to be cleaned contains a balcony, a physical barrier

should be used to prevent the robot access to the balcony and

ensure safe operation.

WARNING: Indicates a hazardous situation that, if not avoided,

could result in serious injury or death.

CAUTION: Indicates a hazardous situation that, if not avoided,

could result in minor or moderate injury.

NOTICE:

Indicates a hazardous situation that, if not avoided,

could result in property damage.

EN

• Before running your robot on hard ﬂoors, please test your robot

on a small section of the hard ﬂoor to ensure that it is compatible.

Using your robot on a hard ﬂoor that is not compatible could result

in damage to your ﬂoor. Contact your hard ﬂoor manufacturer with

questions on compatibility.

• Before running your robot on carpets or rugs, ensure that the carpets or

rugs are compatible with the dual multi-surface rubber brushes on your

robot, otherwise known as beater bars. Using your robot on a carpet or

rug that is not compatible could result in damage to your carpet or rug.

Contact your carpet or rug manufacturer with questions on compatibility.

CHARGING STATION

WARNING

• If the appliance is not working as it should, has been dropped, damaged,

left outdoors or dropped into water, return it to a service centre.

• Do not use a charging station with a damaged cord or plug.

If the cord or plug is damaged, it must be replaced.

• Always disconnect your robot from the charging station before

cleaning or maintaining it.

• Do not use the charging station as a step.

• Charge your robot only with the power supply provided.

The provided power supply delivers safety extra-low voltage

corresponding to the input marking on the robot which is required

to maintain safe operation.

• To prevent the risk of your robot falling downstairs, ensure that the

charging station is placed at least 1.2 metres (4 feet) away from stairs.

• Do not allow liquids to get on or into the charging station.

NOTICE

• Product may not be used with any type of power converter.

Use of power converters will immediately void the warranty.

• If you live in an area prone to electrical storms, it is

recommended that you use additional surge protection.

Your charging station may be protected with a surge protector

in the event of severe electrical storms.

BATTERY

WARNING

• Do not open, crush, heat above 80°C (176°F) or incinerate.

Follow the Owner’s Guide instructions for proper use,

maintenance, handling and disposal.

• Do not short-circuit the battery by allowing metal objects to

contact battery terminals or immerse in liquid. Do not subject

batteries to mechanical shock.

• Lithium ion batteries and products that contain lithium ion

batteries are subject to stringent transport regulations.

If you need to post this product (with the battery included)

for service, travel or any other reason, you MUST refer to the

Troubleshooting section of your manual or contact Customer

Care for postage instructions.

• Periodically inspect the battery pack for any sign of damage

or leakage. Do not charge damaged or leaking battery packs.

Do not allow the liquid to come in contact with skin or eyes. If

contact has been made, wash the aected area with copious

amounts of water and seek medical advice. Place the battery in

a sealed plastic bag and recycle or dispose of safely according

to local environmental regulations, or return it to your local

authorised iRobot Service Centre for disposal.

CAUTION

• Battery usage by children should be supervised. Seek medical

advice immediately if a cell or a battery has been swallowed.

EN

This symbol on the battery indicates that the battery must

not be disposed of with unsorted common municipal waste.

As the end-user, it is your responsibility to dispose of the end-

of-life battery in your appliance in an environmentally sensitive

manner as follows:

(1) returning it to the distributor/dealer from whom you

purchased the product, or

(2) depositing it in a designated collection point.

The separate collection and recycling of end-of-life batteries

at the time of disposal will help to conserve natural resources

and to ensure that it is recycled in a manner that protects

human health and the environment. For more information,

please contact your local recycling oce or the dealer from

whom you originally purchased the product. Failure to properly

dispose of end-of-life batteries may result in the negative

potential eects on the environment and human health due

to the substances in the batteries and accumulators.

NOTICE

• The battery pack must be removed from the robot before

recycling or disposal.

• For best results, only use the Lithium Ion Battery that comes

with the robot.

• Do not use non-rechargeable batteries. Use only the

rechargeable battery supplied with the product. For

replacement, purchase identical iRobot battery or contact

iRobot Customer Care for alternative battery options.

• Always charge and remove the battery from your robot and

accessories before long-term storage.

Roomba® j7 Owner’s Guide 1

EN

Top view

Faceplate

Wall Follow Sensor Charging

Contacts

Visual Docking

Target

Home BaseTM Charging Station

About your Roomba® Robot Vacuum

Bin Release

Button

Bottom view

Charging

Contacts

Caster Wheel

Cli Sensor

Edge-Sweeping

Brush

Multi-Surface

Brushes

Cli Sensor

Brush Frame Release Tab

Brush Caps

Dust Bin and Filter

Floor Tracking Sensor

Camera

Clean Button

2 For more information, visit global.irobot.com

EN

Positioning the Home BaseTM Charging Station Charging

• Place the robot on the charging station to activate the battery.

Note: Your robot comes with a partial charge, but we recommend

that you charge the robot for 3 hours prior to starting the ﬁrst

cleaning job.

• The robot uses a small amount of power whenever it is on the

charging station. You can put the robot in a further-reduced

power state when not in use. To put your robot into Reduced

Power Standby Mode, remove the dust bin and tap the clean

button 5 times. To exit Reduced Power Standby Mode, place

your robot on the charging station and tap the clean button.

For more details on this Reduced Power Standby Mode, refer

to the FAQ page on our website.

• For long-term storage, turn o the robot by removing it from

the charging station and holding down the clean button for

3 seconds with one wheel o the ground. Store the robot in a

cool, dry place.

Using Your Roomba® Robot Vacuum

CLEAN

Light Ring Spiral while charging

White Spiral: charging

Red Spiral: charging, low battery

A solid white light will indicate the battery

charge percentage of your robot

Good Wi-Fi® Coverage

*Objects are not to scale.

1.2 m (4 ft.)

from stairs

1.2 m (4 ft.)

in front

0.5 m (1.5 ft.)

both sides

Download the iRobot Home App and connect to Wi-Fi®

• Follow the step-by-step instructions to set up your Roomba.

• Set up PrecisionVision Navigation to avoid obstacles in real time.

• Set an automatic cleaning schedule and customise cleaning preferences.

• Create smart maps to tell your robot where and when to clean.

Note: Do not place your Home Base™ in direct sunlight. Ensure that the area

around the dock is free of clutter to improve docking performance.

When your robot is fully charged, the

light ring indicator will intermittently

pulse white at the rear.

WARNING: To prevent the risk of your robot falling downstairs, ensure that

the charging station is placed at least 1.2 metres (4 feet) away from stairs.

Roomba® j7 Owner’s Guide 3

EN

Troubleshooting

• Your robot will tell you something is wrong by playing an audio alert and turning

the light ring indicator red. Press the clean button or tap the bumper for details.

Check the iRobot Home App for further support.

• After 90 minutes of inactivity o the charging station, the robot will automatically

end its cleaning job.

• To factory reset your robot, remove the Dust Bin and hold down the clean button

for seven (7) seconds. A sound will let you know when the factory reset has been

completed. Press down the clean button once more to conﬁrm.

Battery safety & postage

For best results, only use the iRobot Lithium Ion Battery that comes with your robot.

WARNING: Lithium ion batteries and products that contain lithium ion batteries are subject to

stringent transport regulations. If you need to post this product for service, travel or any

other reason, you MUST follow the postage instructions below.

• Battery MUST be turned o before postage.

• Turn o the battery by removing the robot from the charging station and holding down

the clean button for 3 seconds with one wheel o the ground. All indicators

will turn o.

• Package the robot securely for postage.

• If you need further assistance, contact our Customer Care team or

visit global.irobot.com.

Cleaning

• Your robot will automatically explore and clean your home in

neat rows, avoiding obstacles using its front-facing camera.

It will return to the charging station at the end of a cleaning

job and whenever it needs to recharge.

• To end a job and send the robot back to its charging

station, hold the clean button down for 2-5 seconds.

A blue light ring pattern will indicate that the robot

is seeking the charging station.

• When your robot detects an especially dirty area, it will

engage Dirt Detect™ mode, moving in a forwards/backwards

motion to clean the area more thoroughly. The light ring

indicator will ﬂash blue.

Your robot is able to recognise and avoid

objects. However, it is still recommended to

remove excess clutter before cleaning.

Just press the clean button

Tap to Start / Pause / Resume

Hold for 2-5 seconds to end a job

When the robot senses its bin needs to be

emptied, the light ring indicator will illuminate in

a red sweeping motion towards the rear.

Red Light Ring

Low battery. Please charge.

4 For more information, visit global.irobot.com

EN

Care and maintenance instructions

To keep your robot running at peak performance, perform the procedures

on the following pages.

There are additional instructional videos in the iRobot Home App. If you

notice the robot picking up less debris from your ﬂoor, empty the bin, clean

the ﬁlter and clean the brushes.

Part Care frequency Replacement

frequency*

Bin Wash bin as needed

Filter Clean once a week (twice

a week if you have a pet).

Do not wash.

Every 2 months

Full Bin Sensor Clean every 2 weeks

Front Caster

Wheel

Clean every 2 weeks Every 12 months

Edge-Sweeping

Brush and

Multi-Surface

Brushes

Clean once a month (twice

a month if you have a pet)

Every 12 months

Sensors and

Charging

Contacts

Clean once a month

Camera Window Clean and inspect once

a month

Care and maintenance

Note: iRobot manufactures various replacement parts and assemblies.

If you think you need a replacement part, please contact iRobot

Customer Care for more information.

*Replacement frequency may vary. Parts should be replaced if there is

visible wear.

Emptying the bin

Open bin door to empty bin.

Press bin release

button to remove bin.

1

2

Place bin back in the robot.

3

Cleaning the ﬁlter

Remove the bin. Remove the

ﬁlter by grasping both ends

and pulling out.

Remove debris by tapping

the ﬁlter against your rubbish

bin.

Reinsert ﬁlter with ridged

grips facing out. Place bin

back in the robot.

1

2

3

Important: The robot will not run if

the ﬁlter is not installed correctly.

Replace the ﬁlter every two months.

Roomba® j7 Owner’s Guide 5

EN

Cleaning the Full Bin Sensors

Wipe the inner sensors with a clean, dry cloth

Wipe the bin door with a clean, dry cloth.

2

3

Remove and empty the bin.

1

Closed Door Opened Door

Pinch the brush frame release

tab, lift the tab and remove any

obstructions.

Remove the brushes from the

robot. Remove the brush caps

from the ends of the brushes.

Remove any hair or debris that

has collected beneath the caps.

Reinstall the brush caps.

Cleaning the Multi-Surface Brushes

Remove any hair or debris from

the square and hexagonal pegs

on the opposite side of the

brushes.

Reinstall the brushes in the robot.

Match the shape of the brush pegs

with the shape of the brush icons in

the cleaning head module.

1

2

3

4

Clear any debris from the vacuum path.

4

6 For more information, visit global.irobot.com

EN

Cleaning the Front Caster Wheel

Pull ﬁrmly on the front wheel module

to remove it from the robot.

Pull ﬁrmly on the wheel to remove it

from its housing (see illustration below).

Remove any debris from inside the

wheel cavity.

Reinstall all parts when ﬁnished.

Make sure that the wheel clicks

back into place.

Important: A front wheel clogged with

hair and debris could result in damage to

your ﬂoor. If the wheel is not spinning freely

after you have cleaned it, please contact

Customer Care.

1

2

3

4

Wheel

Axle

Housing

Washing the bin

Make sure that the bin is completely dry.

Reinsert ﬁlter and place bin back in the

robot.

3

Important: Do not wash the ﬁlter.

Remove the ﬁlter before washing the bin.

Release the bin, remove the ﬁlter and

open the bin door.

1

Note: Bin is not dishwasher safe.

Use a coin or small screwdriver to remove

the screw holding the Edge-Sweeping

Brush in place.

Pull to remove the Edge-Sweeping Brush.

Remove any hair or debris, then reinstall

the brush.

Cleaning the Edge-Sweeping Brush

1

2

Rinse the bin using warm water.

2

Roomba® j7 Owner’s Guide 7

EN

Cleaning the Sensors, Camera Window and

Charging Contacts

Wipe sensors, camera window and charging

contacts with a clean, dry cloth.

Important: Do not

spray cleaning

solution or water

onto the sensors or

sensor openings.

1

US & Canada

If you have questions or comments about your Roomba® robot vacuum, please

contact iRobot before contacting a retailer.

You can start by visiting global.irobot.com for support tips, frequently asked

questions and information about accessories. This information can also

be found in the iRobot Home App. If you need further assistance, call our

Customer Care team at (877)855-8593.

iRobot US Customer Care hours

• Monday to Friday: 9.00 AM–9.00 PM Eastern Time

• Saturday and Sunday: 9.00 AM–6.00 PM Eastern Time

Outside the US & Canada

Visit global.irobot.com to:

• Learn more about iRobot in your country

• Get hints and tips to improve your Roomba® robot vacuum’s performance

• Get answers to your questions

• Contact your local support centre

iRobot Customer Care

Note: Inspect the camera window. If you notice any

cracks, please contact Customer Care.

8 For more information, visit global.irobot.com

EN

reserved. iRobot and Roomba are registered trademarks of iRobot Corporation.

Home Base and Dirt Detect are trademarks of iRobot Corporation. Wi-Fi and the

Wi-Fi logo are registered trademarks of Wi-Fi Alliance.

TW

這是安全警示標誌，用來提醒潛在的人身傷害危險。這是安全警示標誌，用來提醒潛在的人身傷害危險。

請遵守此符號後面的所有安全資訊，避免造成可能的傷害或致死。請遵守此符號後面的所有安全資訊，避免造成可能的傷害或致死。

警告：警告：使用電器時，請一律遵守基本注意事項，包括下列事項：使用電器時，請一律遵守基本注意事項，包括下列事項：

警告：警告：為降低受傷或損壞的風險，請在設定、使用及維護機器人時，閱讀並遵守下列安全注意事項。為降低受傷或損壞的風險，請在設定、使用及維護機器人時，閱讀並遵守下列安全注意事項。

本電器不預期供生理、感知、心智能力、經驗或知識不足之使用者(包含孩童)使用；除非在對其負有安本電器不預期供生理、感知、心智能力、經驗或知識不足之使用者(包含孩童)使用；除非在對其負有安

全責任的人員之監護或指導下安全使用。孩童應受監護，以確保孩童不嬉玩電器。全責任的人員之監護或指導下安全使用。孩童應受監護，以確保孩童不嬉玩電器。

安全資訊

重要安全說明

使用前請閱讀所有指示使用前請閱讀所有指示

請保存這些說明請保存這些說明

觸電危險觸電危險等級等級 II 設備設備閱讀操作手冊閱讀操作手冊

火災危險火災危險

注意注意

限室內使用限室內使用嚴禁兒童接觸嚴禁兒童接觸

一般回收符號一般回收符號

額定功率輸入，額定功率輸入，

直流電直流電

額定功率輸出，額定功率輸出，

直流電直流電

獨立供應單位獨立供應單位

額定功率輸額定功率輸

入，交流電入，交流電

本使用手冊包含以下監管型號的資訊：本使用手冊包含以下監管型號的資訊：RVE-Y1、、ADI-N1

等級等級 III 設備設備

TW

通則

警告

• 機器人配有經過地區認可的電源線，僅限接上標準家用交流電

源插座。請勿使用其他電源線或延長線。如需更換電源線，

請聯絡關懷客戶部，確保取得每個國家/地區專屬的電源線。

• 除非是使用手冊指示，否則請勿打開機器人或充電座。

使用者不得自行維修任何產品內部組件。維修應交由合格

人員進行。

• 為避免觸電，僅限在室內乾燥處使用本電器。

• 請勿在手潮濕的情況下操作機器人或充電座。

• 請勿使用未經授權的充電器。使用未經授權的充電器可能

會導致電池發熱、冒煙、著火或爆炸。

• 機器人並非玩具。當機器人運轉時，請看好小孩和寵物。

• 請勿坐在或站在機器人或充電座上。

• 機器人僅能在室溫環境中存放及運作。

• 若要清掃有陽台的房間，應設好物理屏障，以避免機器人進

入陽台並發生危險。

• 清除防掉落感應器上堆積的灰塵。

• 若要清掃內有火爐、風扇、空間加熱器或加濕器等設備的房間，

請在操作前先移除設備。若機器人接觸並碰撞設備，可能會有受傷、

發生意外或故障的風險。

• 機器人僅限於乾燥地面使用。請勿將此裝置用於清理溢出的液體。

請勿濺溼機器人或充電座。

注意

• 請勿讓機器人在電源插座外露的地面執行清掃作業。

• 請勿使用此裝置清理任何尖銳物體、玻璃以及燃燒或冒煙的物體。

• 請注意，本機器人會自行移動。在機器人正在清掃的區域請小心行

走，避免踩到或絆倒。

• 若本裝置經過並拖住電源線，可能會將桌上或架上的物品扯下。

使用本裝置前，請先收拾好衣物、散落的紙張、百葉窗/窗簾的拉繩、

電源線等物品，以及任何易碎物。熄滅蠟燭。關閉空間加熱器。

• 請按照使用手冊進行必要的維護，以確保操作機器人和充電座時

安全無虞。

• 如果機器人運轉的樓層設有樓梯，請移除最上層踏階的任何雜物。

聲明

• 請勿將任何物品堆放在機器人或充電座上方。

• 充電器觸點如未保持清潔，可能會導致機器人無法為電池充電。

• 在使用機器人打掃硬質地板前，請先在一小塊區域進行測試，以確

保硬質地板適合使用機器人。在不適用的硬質地板上使用機器人可

能會導致地板受損。如有任何關於相容性的問題，請聯絡您的硬質

地板製造商。

• 在使用機器人打掃地毯前，請確保地毯與適用於多種地板材質橡膠

雙滾刷(亦稱為拍打桿)能確實搭配使用。在不適用的地毯上使用機

器人可能會導致地毯受損。如有任何關於相容性的問題，請聯絡您

的地毯製造商。

充電座

警告

• 如果設備無法正常運轉、曾經掉落、損壞、留在室外或掉入水中，

請送回服務中心。

• 請勿使用電源線或插頭損壞的充電座，並請務必更換新的充電座。

警告：表示危險情況，應盡量避開，否則可能會致死或造成嚴警告：表示危險情況，應盡量避開，否則可能會致死或造成嚴

重傷害。重傷害。

注意：表示危險情況，應盡量避開，否則可能造成輕微或中注意：表示危險情況，應盡量避開，否則可能造成輕微或中

度傷害。度傷害。

聲明：聲明：

表示危險情況，應盡量避開，否則可能造成財表示危險情況，應盡量避開，否則可能造成財

產損失。產損失。

TW

• 清理或保養機器人之前，請務必斷開機器人與充電座的連接。

• 請勿使用充電座作為踏階。

• 限用隨附的電源供應器為機器人充電。隨附電源供應器提供的安全超

低電壓，與機器人的輸入標記相對應，是維持安全操作的必備條件。

• 為防止機器人跌落樓下，請確保充電座距離樓梯至少 1.2 公尺。

• 請勿讓液體沾染或進入充電座。

聲明

• 不得搭配使用任何類型的電源轉換器。一旦使用電源轉換器，

產品保固將立即失效。

• 若您住在雷暴發生頻繁的地區，建議您安裝額外的突波保護器。

充電座配備突波保護器，可防止嚴重雷暴侵襲時損壞裝置。

電池

警告

• 請勿將電池打開、重壓、加熱到 80°C 以上或加以焚燒。請按照使用手

冊的指示正確使用、維護、處理和棄置。

• 請勿讓金屬物體接觸電池端子或浸入液體中，造成電池短路。

請勿讓電池受到機械衝擊。

• 鋰離子電池以及內含鋰離子電池的產品受到嚴格的運輸法規管制。若

您基於維修、旅行或其他理由而需要連同電池一起運送本產品，請務必

參閱使用手冊的〈故障處理〉一節，或聯絡關懷客戶部以了解運輸指示。

• 請定期檢查電池組是否有任何損壞或漏液跡象。請勿對損壞或漏液的

電池組充電，同時請避免液體接觸到皮膚或眼睛。若不慎誤觸，請用大

量清水沖洗接觸部位並迅速就醫。請將電池置入密封塑膠袋中，並依

據當地環境法規回收或安全處置。或者，請將電池送回當地經授權的

iRobot 服務中心進行處置。

注意

• 兒童使用電池時，請務必在旁監督。如果誤食電芯或電池，

請迅速就醫。

聲明

• 將電池組回收或處置前，請務必先從機器人上拆下。

• 為確保最佳效果，請務必使用機器人隨附的 iRobot 鋰離子電池。

• 請勿使用非充電式電池。僅可使用本產品隨附的可充電電池。如

需更換電池，請購買相同型號的 iRobot 電池，或聯絡 iRobot 關

懷客戶部，了解其他可使用的電池型號。

• 在長期收納之前，請務必先將機器人和配件的電池充滿，再從機

器人和配件上拆下電池。

TW

電池上的這個符號表示電池不得做為未分類的一般垃圾丟棄。

您身為使用者，有責任透過下列符合環保的方式處理電器中的

報廢電池：

(1) 將電池退還給原購買經銷商；或

(2) 將電池棄置於指定收集點

只要在丟棄報廢電池時另行收集和回收，就能節約自然資源，

並確保透過能保護人體健康和環境的方式來回收電池。如需了解

詳情，請洽您當地的回收辦公室，或您最初購買產品的經銷商。

由於電池和蓄電池含有有毒物質，因此若未能正確處理報廢電

池，可能會對環境和人體健康造成負面影響。

TW

Roomba® j7 使用手冊使用手冊 1

頂視圖

面板

沿牆清掃感應器充電接點

視覺對接目標

Home Base 充電座

關於 Roomba® 掃地機器人

集塵盒開

啟鍵

底視圖

充電接點

腳輪

防掉落感

應器

防掉落感應器

側刷

適用於多種地

板滾刷

防掉落感應器

毛刷框架開啟鍵

毛刷蓋

集塵盒及濾網

地板材質追蹤感應器

鏡頭

清掃鍵

TW

2 如需更多詳細資訊，請造訪如需更多詳細資訊，請造訪 global.irobot.com

決定 Home Base 充電座的位置充電

• 將機器人放在充電座上，即可啟動電池。

註：機器人雖有少許電量，但是建議您在開始第一次清掃工作之前，先為

機器人充電 3 小時。

• 只要機器人在充電座上，就會用到少量電力。您可以將待機中的

機器人設為低耗電模式。若要讓機器人進入低耗電待機模式，

請取出集塵盒，然後輕按清掃鍵 5 次。若要退出低耗電待機模式，

請將機器人放在充電座上，然後輕按清掃鍵。如需有關此低耗電

待機模式的詳細資訊，請參閱我們網站上的常見問題頁面。

• 如需長期收納，請將機器人從充電座取下，並在一個輪子離開地

面的情況下按住清掃鍵 3 秒，讓機器人關機。請將機器人存放在

陰涼乾燥的地方。

使用 Roomba® 掃地機器人

CLEAN

充電時光環會呈螺旋狀旋轉充電時光環會呈螺旋狀旋轉

白色螺旋：充電中

紅色螺旋：充電中，電量不足

恆亮白燈表示機器人的電池充電百分比

良好的 Wi-Fi® 覆蓋範圍

*物體並未按比例繪製。

距離樓梯

1.2 公尺

前方 1.2

公尺

兩側 0.5

公尺

下載 iRobot Home 應用程式並連接 Wi-Fi®

• 按照指示逐步設定 Roomba。

• 設定PrecisionVision精準辨識導航以即時避開障礙物。

• 設定自動清掃時程並自訂清掃喜好設定。

• 建立智慧型地圖，告訴機器人要進行清掃的地點和時間。

註：請勿將 Home Base 充電座放在陽光直射處。請確保充電座周圍沒有

堆放雜物，以改善對接效能。

當機器人充滿電時，光環指示燈將會在

後端間歇性閃爍白燈。

警告：為防止機器人跌落樓下，請確保充電座距離樓梯至少 1.2 公尺。

TW

Roomba® j7 使用手冊使用手冊 3

故障處理

• 發生問題時，機器人會發出聲音警報並讓光環指示燈轉成紅燈。

按下清掃鍵或輕按緩衝器以取得更多資訊。請查看 iRobot Home

應用程式以取得進一步支援。

• 在充電座停用 90 分鐘後，機器人將自動結束清掃工作。

• 若要將機器人重設為原廠設定，請取出集塵盒，然後按住清掃鍵七 (7) 秒。當原廠

重設完成時，會發出提示音通知您。請再次按下清掃鍵以確認。

電池安全和運輸

為確保最佳效果，請務必使用機器人隨附的 iRobot 鋰離子電池。

警告：鋰離子電池以及內含鋰離子電池的產品受到嚴格的運輸法規管制。若您基於維修、

旅行或任何其他理由而需要運送本產品，請務必遵守下列運輸指示。

• 運輸前務必關閉電池。

• 將機器人從充電座取下，並在一個輪子離開地面的情況下按住清掃鍵 3 秒，

讓電池關閉。所有指示燈將會全部熄滅。

• 牢牢包裝機器人以便運輸。

• 如需進一步協助，請聯絡我們的關懷客戶團隊或造訪 global.irobot.com。

清掃

• 機器人將自動探索家中路線、有條不紊地逐列清掃，並使用前

置鏡頭避開障礙物。機器人會在清掃工作結束和隨時需要充電

時返回充電座。

• 若要結束工作並將機器人送回充電座，請按住清掃鍵

2-5 秒。藍色光環圖案表示機器人正在尋找充電座。

• 當機器人偵測到特別骯髒的區域時，便會進入 Dirt Detect™ 髒

汙偵測模式，以向前/向後來回移動方式更徹底地清掃該區域。

光環指示燈將會閃爍藍燈。

您的機器人能夠辨識物體並迴避。但仍建議在進

行清掃前先移除雜物。

直接按下清掃鍵直接按下清掃鍵

輕按以開始/暫停/繼續

按住 2-5 秒以結束工作

當機器人感應到集塵盒需要清空時，光環指示燈

將發出紅色向後掃射的燈束。

紅光環

電量不足。請充電。

ページが読み込まれています...

iRobot J7 取扱説明書

このマニュアルも適しています

iRobot J7 取扱説明書

関連論文

その他のドキュメント