1 of 12
888-61-043-G-01 rev. C • 12/13
User's Guide - English
Guía del usuario - Español
Manuel de l’utilisateur - Français
Gebruikersgids - Nederlands
Benutzerhandbuch - Deutsch
Guida per l’utente - Italiano
Användarhandbok - svenska
:
www.ergotron.com
StyleView Sit-Stand VL
Patient Room
Reduce.Reuse.Recycle
< 25 lbs
(11.34 kg)
< 5 lbs
(2.27 kg)
< 5 lbs
(2.27 kg)
A+B+C< 30lbs. (13.61 kg)
A
B
C
ENGLISH
Max weight 30 lbs (13.61 kg)
CAUTION: DO NOT EXCEED MAXIMUM LISTED
WEIGHT CAPACITY. SERIOUS INJURY OR
PROPERTY DAMAGE MAY OCCUR!
Important! You will need to adjust this product after installation is complete. Make sure all your equipment is
properly installed on the product before attempting adjustments. This product should move smoothly and easily
through the full range of motion and stay where you set it. If movements are too easy or di cult or if product
does not stay in desired positions, follow the adjustment instructions to create smooth and easy movements.
Depending on your product and the adjustment, it may take many turns to notice a di erence. Any time
equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you
should repeat these adjustment steps to ensure safe and optimum operation.
2 of 12
888-61-043-G-01 rev. C • 12/13
ENGLISH
These symbols alert users of a safety condition that
demands attention. All users should be able to
recognize and understand the signi cance of the fol-
lowing Safety Hazards if encountered on the product
or within the documentation. Children who are not
able to recognize and respond appropriately to Safety
Alerts should not use this product without adult
supervision!
Hazard Symbols Review
Safety
Important! You will need to adjust this product after installation is complete. Make sure all your equipment is properly
installed on the product before attempting adjustments. This product should move smoothly and easily through the full
range of motion and stay where you set it. If movements are too easy or di cult or if product does not stay in desired
positions, follow the adjustment instructions to create smooth and easy movements. Depending on your product and the
adjustment, it may take many turns to notice a di erence. Any time equipment is added or removed from this product,
resulting in a change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and
optimum operation.
Symbol Signal Word Level of Hazard
NOTE A NOTE indicates important information that helps you
make better use of this product.
CAUTION
A CAUTION indicates either potential damage to
hardware or loss of data and tells you how to avoid the
problem.
WARNING A WARNING indicates either potential for property dam-
age, personal injury, or death.
ELECTRICAL
An Electrical indicates an impending electrical hazard
which, if not avoided, may result in personal injury, re
and/or death.
WARNING: Because surfaces vary widely and the ultimate mounting method is out of Ergotron’s control, it is imperative that you consult
with appropriate engineering, architectural or construction professional to ensure that your Ergotron mounting solution is mounted
properly to handle applied loads.
CAUTION: Make sure the wall mount bracket is level, ush and snug to the wall surface. DO NOT OVERTIGHTEN THE BOLTS.
3 of 12
888-61-043-G-01 rev. C • 12/13
AB C D
1
2
3
4
5
6
7
8
WALL MOUNTING TEMPLATE
1x
1x
1x
1x 2x
1x1x
1x 2x
1x 1x
13mm
2
1
4x
M4 x 10mm M4 x 14mm
M4 x 10mm
1/4-20 x 1.5”
14x 4x
10x
1/2"
M3 x 5mm
M8 x 80mm
4x
4x
4x
2x
4x
4x
M8
Ø 7/32" (5.5 mm)
Ø 1/2” (13 mm)
Ø 3/8" (9.5 mm)
Ø 1/2" (13 mm)
1x
4x
ENGLISH
Components
Tools Needed
Stud Finder
WOOD
CONCRETE
HOLLOW WALL
4 of 12
888-61-043-G-01 rev. C • 12/13
1
2
WALL MOUNTING TEMPLATE
WALL MOUNTING TEMPLATE
Ø 1/2" (13 mm)
a
abc d
b
39”
(991 mm)
39”
(991 mm)
12 3 4
7
4x
1/4-20 x 1.5”
4x
65
ENGLISH
Set-up Steps
Hollow Wall Wood Stud Concrete
3 Mounting Options
5 of 12
888-61-043-G-01 rev. C • 12/13
1
2
12 3 4
WALL MOUNTING TEMPLATE
WALL MOUNTING TEMPLATE
WALL MOUNTING TEMPLATE
Ø 1/2" (13 mm)Ø 7/32" (5.5 mm)
a
bacde
b
39”
(991 mm)
39”
(991 mm)
13mm
3-1/8”
80mm
7/32”
5.5mm
7
2x
1/4-20 x 1.5”
2x
2x
M8 x 80mm
ENGLISH
Set-up Steps
Wood Stud
6 of 12
888-61-043-G-01 rev. C • 12/13
a
1
2
WALL MOUNTING TEMPLATE
WALL MOUNTING TEMPLATE
Ø 3/8" (9.5 mm)
abc
e
39”
(991 mm)
39”
(991 mm)
b
c
d
3/8”
9.5-10mm
3-1/8”
80mm
7
4x
4x
M8
M8 x 80mm
13mm
ENGLISH
Set-up Steps
WARNING:
Anchors that are not fully set in solid concrete
will not support the applied load resulting in
an unstable, unsafe condition which could lead
to personal injury and/or property damage.
Consult a construction professional if you have
any doubt about what this means in regard to
your particular situation.
WARNING:
Mounting holes must be at least 3-1/8”
(80mm) deep and must be located within
solid concrete, not mortar or covering ma-
terial. If you drill into an area of concrete
that is not solid, reposition mounting
holes until both anchors can be fully
inserted into solid concrete!
Concrete
7 of 12
888-61-043-G-01 rev. C • 12/13
3
4
6x
M3 x 5mm
4x
M3 x 5mm
a
a
cd
ef
b
d
bc
4x
M4 x 10mm
4x
ENGLISH
Set-up Steps
8 of 12
888-61-043-G-01 rev. C • 12/13
5
6
21”
(533 mm)
abc
M4 x 10mm
M4 x 10mm
4x 2x
M4 x 10mm
ENGLISH
Set-up Steps
9 of 12
888-61-043-G-01 rev. C • 12/13
8
7M4 x 10mm
4x 4x 2x
M4 x 14mm
4x
ENGLISH
Set-up Steps
Leave enough slack in cable to allow full
range of up-down motion.
10 of 12
888-61-043-G-01 rev. C • 12/13
a
b
9
13mm
ENGLISH
Adjustment Step
Increase Lift Strength
If the mounted weight is too heavy or
this product does not stay up when
raised, then you'll need to increase Lift
Strength:
Decrease Lift Strength
If the mounted weight is too light or
this product does not stay down when
lowered, then you'll need to decrease
Lift Strength:
Important! You will need to adjust this product after installation is complete. Make sure all your equipment is
properly installed on the product before attempting adjustments. This product should move smoothly and easily
through the full range of motion and stay where you set it. If movements are too easy or di cult or if product does
not stay in desired positions, follow the adjustment instructions to create smooth and easy movements. Depending
on your product and the adjustment, it may take many turns to notice a di erence. Any time equipment is added
or removed from this product, resulting in a change in the weight of the mounted load, you should repeat these
adjustment steps to ensure safe and optimum operation.
Loosen knob, tilt Display to desired position then retighten knob.
11 of 12
888-61-043-G-01 rev. C • 12/13
1/2"
1/2"
1/2"
c
d
e
f
ENGLISH
Adjustment Step
Increase Friction
If this product moves too easily from
side-to-side, then you'll need to
increase friction:
Decrease Friction
If this product is too di cult to move
from side-to-side, then you'll need to
decrease friction:
Increase Friction
If this product moves too easily from
side-to-side, then you'll need to
increase friction:
Decrease Friction
If this product is too di cult to move
from side-to-side, then you'll need to
decrease friction:
Increase Friction
If this product moves too easily from
side-to-side, then you'll need to
increase friction:
Decrease Friction
If this product is too di cult to move
from side-to-side, then you'll need to
decrease friction:
12 of 12
888-61-043-G-01 rev. C • 12/13
Set Your Workstation to Work For YOU!
Con gure su estación de trabajo para que trabaje para USTED.
Ajustez votre station de travail en fonction de VOS besoins!
Richten Sie Ihren Arbeitsplatz so ein, dass er für SIE arbeitet!
Stel uw werkstation zo in dat het voor U werkt!
Approntare la stazione di lavoro nella posizione ergonomica ottimale.
一人ひとりにピッタリのワークステーション!
按照您自身的需要设置工作站！
Learn more about ergonomic computer use at:
Más información sobre el uso ergonómico de ordenadores:
Apprenez-en plus sur l’utilisation ergonomique d’un ordinateur sur:
Weitere Informationen zur ergonomischen Computernutzung nden Sie unter:
Leer meer over ergonomisch computergebruik op:
Per ulteriori informazioni sull’uso ergonomico del computer:
人間工学的なコンピュータの使用法については次のサイトを参照してください
想进一步了解以符合人体工程学的方式使用计算机的知识，请访问：
www.computingcomfort.org
Height Position top of screen slightly below eye level.
Position keyboard at about elbow height with wrists at.
Distance Position screen an arm's length from face—at least 20” (508mm).
Position keyboard close enough to create a 90˚ angle in elbow.
Angle Tilt screen to eliminate glare.
Tilt the keyboard back 10° so that your wrists remain at.
Altura Coloque el borde superior de la pantalla ligeramente por debajo de la altura de sus ojos.
Coloque el teclado aproximadamente a la altura de los codos con las muñecas planas.
Distancia Coloque la pantalla a una distancia de un brazo desde la cara, esto es, unos 50 cm (20 pulgadas).
Coloque el teclado lo su cientemente cerca para que el codo forme un ángulo de 90º.
Ángulo Incline la pantalla para eliminar los re ejos.
Incline el teclado 10º hacia atrás para que las muñecas sigan en posición plana.
Hauteur Positionnez l’écran du haut légèrement en dessous du niveau du regard.
Positionnez le clavier à peu près à la même hauteur que vos coudes, pour que vos poignets soient à plat.
Distance Positionnez l’écran à un bras de distance de votre visage, à au moins 508 mm (20pouces).
Positionnez le clavier assez près pour que vos coudes forment un angle de 90°.
Angle Inclinez l’écran pour ne pas être ébloui.
Inclinez le clavier vers l’arrière de 10° pour que vos poignets soient à plat.
Höhe Positionieren Sie die obere Kante des Bildschirms knapp unter Augenhöhe.
Positionieren Sie die Tastatur bei ach aufgelegten Handgelenken auf Ellenbogenhöhe.
Abstand
Positionieren Sie den Bildschirm mindestens eine Armlänge (50cm) von Ihrem Gesicht entfernt.
Positionieren Sie die Tastatur nahe genug, um einen Ellenbogenwinkel von 90˚ zu ermöglichen.
Winkel Neigen Sie den Bildschirm so, dass ein Spiegele ekt vermieden wird.
Neigen Sei die Tastatur um 10° nach hinten, sodass Ihre Handgelenke ach au iegen.
Hoogte Zet de bovenkant van het scherm iets boven ooghoogte.
Plaats het toetsenbord op ongeveer ellebooghoogte met de polsen plat.
Afstand Plaats het scherm op een armlengte van uw gezicht — op ten minste 508 mm (20 in).
Zet uw toetsenbord zo dichtbij dat u een hoek van 90° in de ellebogen hebt.
Hoek Kantel het scherm om weerspiegeling te elimineren.
Kantel het toetsenbord 10° naar achteren, zodat uw polsen plat blijven liggen.
Altezza Posizionare la parte superiore dello schermo leggermente sotto il livello degli occhi.
Posizionare la tastiera circa all’altezza dei gomiti, in modo che i polsi siano piatti.
Distanza Posizionare lo schermo a un braccio di distanza dal viso, almeno a 20" (508 mm) di distanza.
Posizionare la tastiera a nché sia abbastanza vicina da costringere i gomiti a un angolo di 90˚.
Angolazione Inclinare lo schermo in modo da eliminare i ri essi.
Inclinare la tastiera indietro di 10° in modo che i polsi rimangano piatti.
高さ スクリーンの上端が目よりわずかに下に来るようにします。
キーボードが、手首を水平に伸ばした状態でひじとほぼ同じ高さに来るようにします。
距離 スクリーンを顔から腕の長さ分（少なくとも508mm）離します。
ひじが直角になる位置にキーボードを置きます。
角度 反射光をなくすようにスクリーンの角度を調整します。
キーボードを後方に 10° 傾けて、手首が水平になるようにします。
高度 屏幕顶端的位置要稍低于视线高度。
将键盘放置在大约肘部的高度并且手腕要能放平。
距离 将屏幕摆放在距离面部一臂长的位置——至少 508mm (20”)。
键盘的位置要够近，以使肘部形成直角。
角度 倾斜屏幕以消除眩光。
将键盘向后倾斜 10 度，使手腕能保持放平。
To Reduce Fatigue
Breathe - Breathe deeply through your nose.
Blink - Blink often to avoid dry eyes.
Break • 2 to 3 minutes every 20 minutes
• 15 to 20 minutes every 2 hours.
Para reducir la fatiga
Respirar - Respire hondo por la nariz.
Parpadear - Parpadee a menudo para que no se sequen
los ojos.
Descansar • 2 o 3 minutos cada 20 minutos
• 15 o 20 minutos cada 2 horas.
Pour réduire la fatigue
Respirez - Respirez profondément par votre nez.
Clignez des yeux - Clignez souvent des yeux pour ne pas
avoir les yeux secs.
Faites des pauses • 2à 3minutes toutes les 20minutes
• 15à 20minutes toutes les 2heures.
Vermeiden von Ermüdungserscheinungen
Atmen - Atmen Sie tief durch die Nase ein und aus.
Blinzeln - Blinzeln Sie so oft wie möglich, um trockene
Augen zu vermeiden.
Pausen • Machen Sie alle 20Minuten eine Pause von
2-3Minuten
• Machen Sie alle 2Stunden eine Pause von 15-20Minuten.
Om vermoeidheid te verminderen
Ademen - Adem diep door uw neus in en uit.
Knipperen - Knipper regelmatig om droge ogen te vermi-
jden.
Pauzes nemen • 2 tot 3 minuten elke 20 minuten
• 15 tot 20 minuten elke 2 uur.
Per ridurre l’a aticamento
Respirazione - Respirare profondamente dal naso.
Battito delle palpebre - Battere spesso le palpebre per
evitare che gli occhi si asciughino.
Pause • Fare una pausa di 2 - 3 minuti ogni 20 minuti
• Fare una pausa di 15 - 20 minuti ogni 2 ore.
疲れを軽減する方法
呼吸 - 鼻から深く呼吸します。
まばたき - 目の乾燥を防ぐために頻繁にまばたきしてく
ださい。
休憩 • 20分ごとに2～3分
• 2時間ごとに15～20分
为了减轻疲劳
呼吸 - 通过鼻子深呼吸。
眨眼 - 经常眨眼可避免眼睛干涩。
休息 • 每隔 20 分钟休息 2 至 3 分钟
• 每隔 2 小时休息 15 至 20 分钟.
ENGLISH
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
他の言語で
- italiano: Ergotron 61-080-085 Manuale del proprietario
- Deutsch: Ergotron 61-080-085 Bedienungsanleitung
- français: Ergotron 61-080-085 Le manuel du propriétaire
- English: Ergotron 61-080-085 Owner's manual