iON SnapCam クイックスタートガイド





Quick Start Guide



EN-2

1. Introduction

SnapCam is a HD wearable camera. It allows users to take and

share photos and videos on social media.

2. Key Features

z Ultra Slim and Light-weight

z HD Video (720p @ 30fps)

z 8mp Photos

z Auto rotate.

z Upload and Share Photos and Videos using built-in Wi-Fi

z Magnetic Clip included to wear on clothes, bags, hats etc.



EN-3

3. Function

1. Camera LED (Red) Indicate the cameras reaction

2. Wi-Fi LED (Blue) Indicate Wi-Fi status

3. Battery LED (Green)

Indicate the camera battery

status

4. Lens Wide angle lens

5. Power Button

Turn on and off the camera

Turn on and off the Wi-Fi

Reset the camera

6. Magnet

For attaching your SnapCam to

clothing etc.

7. Microphone



EN-4

8. MicroSD Card Slot For MicroSD card

9. Micro USB Port

Connection for charging and

mass storage

10. Touch Panel

activate video, photo and live

streaming.

11. Silicon Bumper

Protect the camera and

decoration

12. Back Clip Mount

To clip to clothing and

accessories to make SnapCam

wearable.

4. First Time Use

4.1 Charging your SnapCam



EN-5

Charge the built-in battery before starting to use your SnapCam. When

the SnapCam is off, the charging time from empty to full is approximately

1.5 hours.

The LED will turn solid GREEN once the SnapCam is fully charged.

4.2 Inserting a MicroSD Memory Card

You must insert a MicroSD Card (required, not included) before using the

SnapCam. The SnapCam supports MicroSD Card from 2GB to 32GB

Class 6 or higher is recommended.

Note:

There is only one direction to insert the MicroSD Card into the slot. Do

not force the MicroSD Card into the slot as this may damage both the



EN-6

scanner and the MicroSD Card.

The MicroSD Card must be formatted before first time use.

4.3 Setting Date & Time

When the SnapCam is used for the first time, or it has been restored to

default settings, it is necessary to set the SnapCam’s clock to ensure the

captured photo and video files are saved with correct date and time

information.

To set-up the SnapCam’s clock:

1. Insert a formatted MicroSD Card into the SnapCam.

2. Connect the SnapCam to a PC as mass storage device (please

refer to Section 5.9).

3. Open the MicroSD file folder, create a file in any format (eg. txt

file) and name it with the format “set-YYYYMMDD-HHMM”, YYYY,

MM, DD, HH, MM represent the year, month and day, hour,

minute of existing time. (eg : set-20150618-1100.txt)

4. Disconnect the SnapCam from the PC, and tap once on

SnapCam touch panel, the SnapCam will scan the file and write it

to system clock.

5. Using the SnapCam

Please ensure you are running the latest firmware to get the best from



EN-7

your SnapCam, visit www.ioncamera.com for firmware updates.

5.1 Wearing your SnapCam

This method is suitable for wearing your SnapCam on a jacket or

relatively thick clothes.



EN-8

Note: Wear your SnapCam vertically, otherwise, the SnapCam may slip

and produce a tilted view.

Disclaimer: Please do not put the magnet clip too close to magnetic card

strips (credit/debit cards) or smartphones to avoid malfunctions.



EN-9



Note: Please remove the sticker on the surface of your SnapCam before

use.

5.2 Power On your SnapCam.

Press the Power On button for 3-4 seconds, the SnapCam will

automatically search for a Wi-Fi network.



EN-10

5.3 Take a Single Photo

Simply tap the touch panel of your SnapCam to take a photo. The red

LED will flash once to indicate the photo was taken. You may also take a

single photo using iON SnapCam App by clicking “Take Photo” icon.



EN-11

5.4 Use Time Lapse to take Photos



1. Set your SnapCam to Time Lapse Photo function using the iON

SnapCam App and smart device.

2. Simply click “Start Time Lapse Photo” on the iON SnapCam App,

then your SnapCam will start to take photos at the set time intervals.

3. You may cancel the Time Lapse Photo function using the iON

SnapCam App



EN-12

5.5 Video Recording



1. Simply tap the touch panel of your SnapCam twice to start video

recording. The red LED will stay solid for the duration of recording.

You may also start video recording through iON SnapCam App by

clicking “Start Video” icon.

2. Tap the touch panel of your SnapCam twice to stop video recording,

or click “Stop Video” icon on iON SnapCam App.

Note: Please note changing video or photo resolution will decrease

battery life.



EN-13

5.6 Short Video Recording

1. Set the duration of Short Video Recording using iON SnapCam

App and a smart device. (Default is 15 seconds)

2. Simply touch and hold the touch panel of your SnapCam to start

short video recording. You may also start/stop short video recording

through iON SnapCam App by clicking “Start Short Video” icon.



EN-14

5.7 Live Streaming

Your SnapCam is capable of live streaming.

1. Make sure your SnapCam is connected to a Wi-Fi network

2. Open the iON SnapCam App and select your SnapCam in the

Device Page.

3. Swipe the touch panel of your SnapCam from left to right to start

live streaming.

4. To stop live streaming, swipe the touch panel of your SnapCam

from right to left.



EN-15

5.8 Connecting your SnapCam to a smart device.

You may control your SnapCam using the iON SnapCam App and a

smart device.



1. Open the iON SnapCam App and select Device Icon to enter to

the Device Page.

2. Click “Device\Add New”. Automatic device search will begin.

3. Select your SnapCam from the list of available devices.



EN-16

Note : Minimum operating system requirement for iON SnapCam App:

Android 4.3, iOS 4.0

5.9 Connecting your SnapCam to PC

The SnapCam can be connected to computer as mass storage device

(MS Mode) and transfer the photos and video files for storage, if it is not

under recording. If the SnapCam is recording when connected to a PC, it

will not enter to the mass storage mode but will begin charging.



EN-17

6. Specifications

Lens Wide angle lens

Water Resistance IPX4

Still Image

resolution

8MP (Default), 2MP

Video Resolution 720p 30fps , WVGA : 848 x 480

Video Format MPEG4 (H.264) .MP4 File

Photo Format JPG

Memory Slot MicroSD card

Support System

Windows XP, Vista, 7, and 8 ;

Mac OS X 10.6 or later

Microphone Built-in

Battery Life 2 hours continuous recording

Dimension (L x H x

W)

40 x 40 x 12.5 mm

Weight 32g

Operation

Temperature

-10°C - 45°C

Storage

Temperature

-20°C - 70°C



EN-18

7. Troubleshooting

Problem Cause Solution

Unable to record

videos or photos

1. MicroSD card is

not inserted.

2. Memory is full.

Camera

malfunction.

1. Insert a MicroSD

card. Supports

2GB – 32GB

class 6 or higher.

2. Replace a

memory card

with space

available for

content.

3. Reset the

camera.

Cannot find

removable disk

after connecting the

camera to the

computer

Connection failure.

1. Check all cable

connections.

2. Restart the

computer if

necessary.

Blurry images

The lens of camera

is dirty

Clean the lens with

soft and dry cloth



EN-19

FCC Statement

Warning: Changes or modifications to this unit not expressly approved by the

party responsible for compliance could void the user’s authority to operate the

equipment.

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that

may cause undesired operation.



EN-20



Specific Absorption Rate (SAR) information:

This equipment meets the government's requirements for exposure to radio

waves. The guidelines are based on standards that were developed by

independent scientific organizations through periodic and thorough evaluation of

scientific studies. The standards include a substantial safety margin designed to

assure the safety of all persons regardless of age or health.

FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6

W/kg averaged over one gram of tissue. Device types: FCC ID: NW71045 has also

been tested against this SAR limit. The highest SAR value reported under this

standard during product certification for use when properly worn on the body is

1.288 W/kg or head is 1.478 W/kg. This device was tested for typical body-worn

operations with the back of the handset kept 0 cm from the body or head. The use

of accessories that do not satisfy these requirements may not comply with FCC RF

exposure requirements, and should be avoided.

ページが読み込まれています...

iON SnapCam クイックスタートガイド

iON SnapCam クイックスタートガイド

他の言語で

関連論文

その他のドキュメント