Hitachi AJ-S55GZ ユーザーマニュアル

カテゴリー
洗濯機
タイプ
ユーザーマニュアル
USER MANUAL
FULLY AUTOMATIC WASHING MACHINE
Model AJ-S55GZ
Thank you for your purchase of
Fully Automatic Washing Machine.
Please read this manual carefully for proper
operation.
Please keep this manual for future reference.
2
CONTENTS
Preface ........................................................................................................................... 3
Safety Precaution .................................................................................. 4
Installation Guide .................................................................................................... 7
Installation .................................................................................................................... 12
Safety Check
........................................................................................................... 13
Washing Machine Repair
............................................................................... 13
Control Panel ........................................................................................................ 14
Technical Description ........................................................................................ 17
Before Using Your Machine ............................................................................. 18
Checking Amount of Laundry and Detergent (Approximately Amount)
( ) .......................................................................................... 19
How to Use Liquid Detergent, Bleach and Fabric Softener
..................................................................................... 20
Amount of Laundry and Detergent ......................................................... 22
Selection of Laundry Process ............................................................. 23
NORMAL Process ................................................................................................ 24
HEAVY Process .................................................................................................... 26
SPEEDY Process ................................................................................................. 28
SOAK Process ...................................................................................................... 29
SILK Process ........................................................................................................ 31
BLANKET Process ................................................................................................ 35
Using the Washing Cap ..................................................................................... 38
Wash in Your Favorite Way ...................................................... 40
Content of the Washing Process ............................................................... 42
Using the Preset for Washing ........................................................................ 43
WIND DEHYDRATION Process ........................................................................ 45
AIR-JET Process ................................................................................................... 47
Maintenance of Washing Basket (BASKET AIR-JET BASKET CLEAN) ....
50
Use the Detergent Again ............................................................................ 52
Use Guidelines ....................................................................................... 52
Maintenance and Repair ................................................................................ 53
When Failure Happens .................................................................................. 57
Optional Parts ....................................................................................................... 63
Product Specifications ............................................................................................ 64
3
Preface
Air-jet drying
Infiltration washing
Infiltrate the detergent inside the cloth to detach the dirt off the cloth fiber.
The detergent dissolves sufficiently to become the high-concentration detergent that washes the
laundry in infiltration mode for easier detachment of dirt off the cloth fiber.
The number next to the sign is the page number for detailed description.
Please use concentrated powder detergent to wash.
The infiltration washing can't be performed to the processes of "SILK", "BLANKET" and "BASKET CLEAN". (Because of
no detergent dissolution course in these processes)
( )
It's an economic mode of drying without heating.
May be used to dry the heat-irresistible swimsuit or the underwear containing the amino heat-insulation materials.
Keep room free of mugginess for causing no temperature rise.
Control the black mildew.
The drying capacity can be as high as 1.5kg.
1.5kg
The duration is irrelevant to the dryness level for applying the preset mode of drying.
Please read "USER MANUAL" carefully for proper operation.(
47)
(
47)
2) Supply a little water
3) The detergent dissolves inside
the cloth
The concentrated detergent dissolves
with the power agitating of pulsator,
and infiltrates sufficiently inside the
cloth.
Detergent injection
opening
Outer basket
Pulsator
Stainless-steel basket
The laundry rearrangement may be out of service in the case that the washing capacity is less than 1kg
or more than 4kg.
1kg 4kg
The laundry rearrangement doesn't perform in the case of manual setup of "RINSE", "SPIN" or "SPIN
ONLY".
Laundry rearrangement and spinning
Loosen the post-spinning laundry for easy taking out.
1
1) Put detergent in
The detergent put in at the
injection opening will fall
below the pulsator.
THREE-STEP washing
Inject a little water, and the dirt
will detach with the high-
concentration detergent; inject
more water to the normal water
level for washing.
2,3,4
4
Safety Precautions
Please read this part of substance carefully for proper operation before using your machine.
The precautions stated here are classified as "Warning" and "Attention" according to the damage and the emergency
caused by misoperation, and are described respectively in line with the marks below
With no respect to this mark, the misoperation may cause death or GBH.
With no respect to this mark, the misoperation may cause body harm or object damage.
This mark indicates the content of warning or attention.
This mark indicates the prohibited action.
This mark indicates the compulsory action to be carried out.
Graphic mark
~
Dismantle, repair or alterations should
only carried out by professional
technicians.
Avoid electric shock, fire, and body injury due to
improper activity.
This washing machine is equipped
with the electricity wire with bi-
electrode grounding plug, please use
the bi-electrode grounding socket.
The creepage protector shall be used
if possible.
To prevent electricity leak which may cause injuries.
Electricity supply must be unplugged
with dry hands.
Otherwise, this may cause electric shock.
Please use the single socket with
220V, 10A specification.
220V 10A
The share of the same socket with
other electric appliances may cause
fire due to excessive heat.
Washing machine should not be
installed in humid place or in places
exposed to wind and rain.
Otherwise, electricity leak causing electric shock or fire may occur.
Do not put water in direct contact with
the unit during maintenance and repair.
This may cause short circuit or electric shock.
Dismantling
Prohibited
Grounding
Wet hands
Prohibited
Power
Humid places
prohibited
Prohibited
Warning
Attention
Warning
5
Prohibited
Prohibited
Clear
Do not put your hand into the basket
until it has stopped completely.
Even when the spinning of the basket
is slow, there is still a danger of being
caught in the motion, resulting injuries.
Particular attention should be paid
when children are around.
Damaged or loosen wire or plug
should not be used.
Keep child away from the washing
spinning basket and do not place box
or shelves next to the washing machine.
Children may fall into the
basket resulting in injuries.
Otherwise electric shock, short circuit or fire may take place.
Do not put your hands into the
washing spinning basket during the
washing and rinsing process.
Even when the spinning is slow, hands may be trapped by
clothes. If necessarily, please press pause button, and put
your hands into the basket after it has stopped completely.
(
)
Do not damage wire.
Do not damage or alter the wire
forcibly bend, pull, twist or handle
the wire. Beside, please do not
put weight on or trap the wire.
Damage of wire may cause electric shock or fire.
Thoroughly wipe the power plug
when dirt is adhering the prong or
around the base of the prong.
Failure to do so may cause a fire.
To prevent fire or explosion which may cause injuries.
Do not put gasoline, benzine,
alcohol, thinner of fabrics with
these stains into or near to the
washing machine.
Prohibited
Prohibited
Prohibited
Prohibited
This washing machine is strictly
prohibited to get close to the
locations with candle, mosquito-
repellent incense, dog-end or other
kinds of open flame.
No smoke or fire
To avoid injuries caused by the lock damage.
Warning
6
Do not open the lid in locked status by force.
Prohibited
Otherwise, the lid or locking device
may be damaged, resulting in
unstoppable spinning of washing
spinning basket and thus causing
injuries.
Safety Precautions (continued)
Do not pull the wire from the
socket when unplugging the unit.
To avoid electric shock or fire cause by short
ciruit may result.
Do not connect to the hot water supply.
And, water of above 50
o
C should not be
used for washing.
50
o
C
Electric shock or leakage may occur
due to deformation of plastic parts of
the unit.
Please unplug the unit when not using
the unit for a long period of time.
Electric shock or leakage due to aging of insulator may
cause fire.
Water supply hose should be tightly
screwed to the unit.
Failure to do so may result in water leakage.
Used for a long period of time, the unit may
result in water leakage caused by loosen
union nut. So please check it in time and
screw tightly again.
Check water supply hose connection
by turning on the water before
washing.
To prevent damages caused by possible water leakage
due to loosen screw.
Do not stand on or put weight on the
top of the unit.
Otherwise, deformation and damage
may result causing injuries.
Ports in motion beneath the
unit may cause injuries.
Keep hands and feet away from the
bottom of the washing when it is motion.
Electricity supply must be unplugged
with dry hands during maintenance
and repair.
Otherwise, electric leakage causing
injuries may occur.
Prohibited
When installing the washing machine,
be sure to draw out the water drainage
hose until the black and purple mark is
seen.
Failure to do so may cause friction leading to damage.
Prohibited
Prohibited
Prohibited
water
leakage
water
leakage
water
leakage
Warning
Attention
Do not insert a screwdriver into the Lid
Lock hold.
Prohibited
To avoid injuries caused by the lock damage.
Union nut
7
Installation of Washing Machine
Please install on a solid horizontal
surface.
Installation on a slippy or irregular surface
may result in noise and shaking.
The unit should be installed on a flat horizontal surface.
Otherwise sudden stop or abnormal sound may result during the spinning cycle.
Avoid installing the unit too close to the
wall.
This is to prevent abnormal vibration and noise.
Where to install
Solid, horizontal surface Weak surface Irregular surface
How to install
Installation Guide
Do not wash, rinse and spin the water
proof fabric or cloth.
sleeping bag, raincoat, cover of skiing, utilities,
bicycles, cars and motors
Prohibited
Otherwise may lead to injury by abnormal vibration during spinning
or damage the washing machine, wall, floor and clothes.
Attention
Please turn off the water tap when not
using the unit.
To prevent damages caused by water
leakage.
water
leakage
( )
Do not incline installing the washing cap. Do not use the washing cap except SILK process, BLANKET process.
Prohibited
Splash of water may occur or washing cap may be swung out of the basket.
8
Put some water into the washing barrel and reconfirm its
horizontality.
The ground is level if all front, rear, left and right height difference between
the spinning hole and water surface are less than 3mm.
(B C ) 3mm
BC
Spinning hole
Installation Guide (continued)
Installation of Washing Machine
1
Adjust the instability of the washing
machine with adjustable leg.
2
Please make sure of the horizontality of the
washing machine.
As shown in the figure, the horizontality can be easily
observed by the string used to hang an object.
Fixed leg
Adjustable leg
It is level if the
clearance between A
and machine body is
the same with that
between A and the
machine body.
A
string
A
A
object
(front or
profile)
Inspection of trial run
How to Use the Adjustable Leg
1
Loosen the lock nut by unscrewing in
arrow direction 1 before using the
adjustable leg to stabilize unit.
1
2
After adjusting of the unit, tighten
the lock nut by screwing it in arrow
direction.
2
Lowering
Loosening
Lock nut
Adjustable leg
Elevating
Maximum adjust able
range is 40mm.
Tightening
Lock nut
Plastic base
Tighten the lock nut until it reaches the plastic base.
At most 40mm
40mm
To install the machine on an inclined floor, leg caps in the attached accessory kit can be used to adjust height by
connecting them to the fixed leg.
9
How to Change the Water Drainage Hose and How to Install the Base Plate
When fitting the water drainage hose to the
water drainage outlet
If the water drainage outlet is too shallow
or the end of the water drainage hose
touches the grounds, cut the end of the
water drainage hose in an oblique angle.
Water drainage hose which inserts into the unit, can 't
touch other parts, to prevent the damage caused by
water leakage.
The black or purple mark of the water
drainage hose should be inserted into the
corresponding groove of the unit.
Water drainage hose retainer must be tightened.
The inner section of the water drainage hose must be
secured by the retainer before fetched out.
Failure to do so may cause
insufficient rinsing or unit
malfunction due to poor drainage
or too much subbles during rinsing
and spinning.
Attention
Attention
Water
drainage hose
Water
drainage outlet
Water drainage hose is attached on the left side of unit at shipment, nonetheless, it can be
reattached on the right side to suit drainage needs.
2Purple mark
Water drainage hose outlet
3Hose retainer
1
Back
Black mark
Front
The water drain-
age hose pulled
out (right)
The water drain-
age hose pulled
out (left)
The water
drainage hose
Corrugate
paper etc.
1
Lay the unit down slowly.
Lay the unit down on some corrugate paper to
prevent damage.
2
Pull out the water drainage hose from
the right side of the unit.
1 Remove the right water drainage hose cover
(The cover can be disposed).
2 After pulling out the Black mark of the
water drainage hose from the left groove of
the unit , the Purple mark of the water
drainage should be inserted into the
corresponding groove of the right unit.
3 The water drainage hose should be pulled out
through the proper hose retainer when the hose
is pulled out on the right.
10
How to install the base plate (Mount the base plate on the pad on top of
unit)
( )
Fit the barb on the plate into the square hole of the bottom, and tighten the screws.
Installation Guide (continued)
Water Drainage Hose Related Parts
How to Install the Water Supply Hose
Extended the water drainage hose
Please use optional extension drainage tube for
lengthening the water drainage hose.
Ensure that the water drainage hose will not separate from its outlet even if there is vibration
or the outlet is too big or too shallow.
Follow the instructions below to improve drainage efficiency.
The method of pulling out the water drainage
hose as shown below should be avoided.
Otherwise, water leakage or abnormal
sound may occur.
When purchasing extension hose, make sure that the inner diameter of the hose is big enough, otherwise, poor
drainage may cause and result in the malfunction of the unit.
Firmly tighten the union nut when
connecting the water supply
hose to the main unit.
Loosely tightened union nut will cause water leakage.
When removing the hose, unscrew the union nut first.
Please use optional extension tube for
lengthening the water supply hose.
Three standard of extension hoses (1m,2m,3m) are
available.Please inquire distributors for extending
the water supply hose.
1m 2m 3m
Length of water drainage hose
should not exceed 5m.
5m
Extension drainage hose
Height of water drainage hose should
not exceed 15cm and length should
not exceed 2m.
15cm
2m
Less than 5m
5m
Less than 2m
2m
Less than 15m
15m
Attention
Connecting the water supply hose to the main unit
Extended the water supply hose
Water drainage hose should not be inserted
into the outlet directly from the inside.
Union nut
11
How to Install the One Touch Joint
1
Confirm the diameter of the water tap.
If the diameter exceeds 2cm, remove
the joint ring.
2cm
Screw joint B in the arrow direction to
adjust the gap.
B
For water supply hose installation, please refer to "How to install water supply hose" in the user manual.
Loosening may occur with extended use. In such case, reinstall the joint following steps 2 to 4.
2 ~ 4
(Carry out the same steps when reinstalling the one touch joint at a change of residence, etc.)
( )
Horizontal tap A
A
Horizontal tap B
B
Square mouth tap Universal household tap Swivel tap
2
3
4
Tighten joint B in the arrow direction
to reduce the gap between joint A
and B to 4mm or less.
B A B
4mm
Check the distance between
joints A and B.
A B
Press the sealed pad evenly against the
tap and tighten the four screws in a uniform
fashion.
4
Appropriate water tap
Horizontal taps A and B as shown below.
A B
12
1
3
2
2
1
Please turn on the water tap to check to connecting condition of the water supply hose
before washing.
To prevent damages caused by water leakage due to loosen screw.
How to install and remove the water supply hose
Water tap
Do not allow water tap, one touch joint and rubber
ring to touch the unit when installing them.
Installing
Push down the rubber ring
and insert the tap into the
one touch joint.
Release the rubber ring and
push up the water supply
hose until it clicks.
Pull the water supply hose to
check that it does not come
off easily.
Removing
Turn off the water tap.
Press the start button and let the unit run for about
ten seconds.
10
This is to prevent water splash when removing the tap.
Remove the latch and the water supply hose while
pushing down the rubber ring.
Loosely tightened union nut will cause water
leakage.
When removing the hose, unscrew the union
nut first.
Please note that water supply hose and one
touch joint should be used.
The appliance is to be connected to the water
mains using new hose-sets and that old hose-
sets should not be reused.
Turn the union nut in the direction as shown
by the arrow and firmly. Connect it to the
water supply opening.
Firmly tighten the union nut when con-
necting the water supply hose to the main
unit.
Failure to do so may result in water
leakage.
Installation
Attention
Attention
One touch joint
Latch
Latch
Water supply hose
Rubber ring
Rubber ring
Turn off
Attention
Main unit
Union nut
13
Safety Check
If any of the following conditions or other abnormalities occur, immediately pull out the power plug
to prevent an accident and request help from an authorized dealer or agent.
, , (
)
Never conduct repairs by yourself as it may be dangerous.
,
If you have used the washing machine for 4 - 5 years,even if the following conditions and other abnormalities do not occur, request
for safety inspection of the machine is stilled required.
4 ~ 5 , ,
If the power supply cord is damaged, Please repair it in a repair shop appointed by the manufacturer or its service agents in order
to avoid a hazard.
The washing machine is not to be used by children or persons with reduced physical , sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction.
The washing machine having ventilation openings in the base.
The washing machine bottom must not be obstructed by carpeting when the washing machine is installed on a carpet floor.
When you turn on the switch, the machine sometimes does
not operate.
The power cord has cracks or flaws .
There are abnormal sounds and vibrations during operation.
The agitator does not stop easily. ( It takes over 15 seconds
for the agitator to stop )
( 15 )
There is water leakage. (Basket,hose, joint,etc. )
( )
There is a smell of burning.
If you touch the machine, you may get an electric shock.
,
In case when the washing machine is used in places other than ordinary households.
If the washing machine is in use for extremely long periods of time compared to ordinary household usage, such as in dormitories
and hospitals,it may be necessary to change parts(such as the clutch,belt or sealed pad) more frequently.In this case,consult with
the dealer from whom you purchased the washing machine and have the machine inspected periodically.
, , ( )
,
Washing Machine Repair
In case of malfunction of the washing machine, read the manual in detail before requesting repair
services. If the the problem still cannot be solved, contact an authorized service dealer or a service
agent and provide the following information.
1 Model name: AJ-S55GZ.
2 Describe abnormal situations and damages in detail.
3 Your address and telephone number.
, ,
,
1 AJ-S55GZ
2
3
14
Control Panel
Never press 2 (or more) buttons together, which may cause misoperation.
2 ( 2 )
Attention
15
In the case of any of the following manual setup, the washing machine will make 2 sounds for acceptance (to announce the datum
mark of indication):
2 ( )
1 The water level is "50L"; 2The washing duration is 15 minutes ("9 minutes" + "6 minutes"). 3 Rinsing duration is "twice"; 4 The
spinning duration is "6 minutes"; 5 The preset duration is "9 hours later"; 6The process switches to "NORMAL"; 7Switch wind
dehydration to "basket air jet".
1 50L 2 15 ( 9 + 6 ) 3 2 4 6 5 9
6 7
16
Lid Lock function
Hope to switch off the buzzer beep after the completion of the washing process
Setup safe model
Follow the below steps to switch off the buzzer beep after the completion of washing process.
You can press and hold down the START/PAUSE button for at least three seconds to recover the beeping.
3
1
Press the power button.
2
Press and hold down the START/PAUSE button for at least three seconds, the buzzer
beep can be switched off.
3
The lid will be locked automatically when washing for children's safe.
1
2
3
Cut off the power supply.
(
)
Control Panel (continued)
The buzzer makes a sound of "beep" to announce the
completion of setup.
Lid Lock indicator will light.
To unlock the Lid Lock, repeat the above operations once again.
The buzzer makes a sound of "beep" to announce the
completion of remove.
Lid Lock indicator will be out.
With the set of Lid Lock function, the washing machine can't operate if the lid is opened. (The control
panel will release the alarm if the lid is opened)
Attention
Close the Lid, press button.
Press and hold down the button for at least three seconds.
3
When you want to open the lid
When beginning again
With the set of safe mode, the lid will be locked as the washing machine restarts.
Without the set of safe mode, the lid will be locked automatically during the course spinning.
Press button Lock will be removed automatically after washing. Lid can be opened.
17
Technical Description
The number next to the sign is the page number
for detailed description.
Accessories (Refer to Installation Guide ) ( )
56
53
Water Inlet
48
Inhaling Window
Lid
Water drainage
hose
Washing Spinning basket
14
Control panel
20
Powder synthetic
detergent dispenser
(Detergent injection)
21
Bleach and
Liquid detergent
injection opening
Pulsator
Power Wire
Hose rest
16
Lid Lock
8
Adjustable leg
(Where height of the front
leg can be adjusted)
54
Lint filter
21
Fabric softener
injection
Nanometer titanium
filter net
Water supply hose
(One)
(1 )
Base plate (Screws include)
( )
(One)
(1 )
One touch joint
(One)
(1 )
Leg cap
(Two)
(2 )
18
The laundry from which the
hair or silk is inclined to run
shall have its inner side turn
to external before washing.
Please remove soil or dirt
from laundry before
washing.
Remove anything from the
laundry before washing.
(Do not forget anything in
pocket)
( )
To avoid damaging the clothes
and unit malfunction.
Before Using Your Machine
Preparation for washing machine
Remove matches, hairpins or
coins etc. from laundry.
Preparation for laundry
When the first using
The washing machine can be used only after the proper installation in compliance
with the "Installation Guide".
Daily using
The front of the water drainage hose must insert in the water drainage
outlet.
Connect the water supply hose and turn on the water tap.
Insert the power plug into the socket.
1
2
3
Secure strings and pull zips
up before putting laundry
into the washing machine.
(beneficial suggestion)
( )
This is to prevent damage to
clothes and zips.
Clothes of easily-fadeaway
colors must be separated.
The bluejeans that are inclined
to fade may decolor during
washing.
The jeans and alike
The vulnerable laundry shall
be put into the wash string
bag before washing.
Prevent the laundry from dam-
aging by accident.
The laundry from which the
silk is inclined to run shall
be put into the string bag
before washing.
Please handle the dirt as
early as possible.
To be cautious, please put the laun-
dry with lace or the woman under-
wear with steel wire into the optional
wash string bag before washing.
The laundry made of corduroy or
other particular cloth, and the black
hose or other clothing sensitive to
silk-running shall be put into the
optional anti-silk-running string bag
before washing.
As it's hard to remove the dirt after
adhering to laundry for long, the
dirt shall be under cleanout and
handling with detergent before
washing, which brings better wash-
ing effect.
Water supply hose
220V
~
220V
Drainage
outlet
One touch joint
Turn on
19
Checking amount of laundry and detergent (Approximately amount)
Put bulky or floating laundry in basket first.
The bluejeans and other thick cloth shall be evenly
distributed in the washing basket before washing.
(Prevent the laundry from overflowing during washing)
Splash of water must be prevented.
Put in the laundry as
evenly distributed as
possible.
How to put laundry in
It smoothes rotation of the laundry.
Splash of water must be prevented.
Sheet
Checking amount of laundry
Select the process required for washing after put in the laundry, and press the "START" button. The sensors begin to detect
the weight of laundry, and the necessary detergent amount (approximate amount) and water level are displayed correspondently.
(The detection is not included in the processes of "SILK", "BLANKET", "BASKET CLEAN" and "AIR-JET".)
The indicator lights
to show that the
water levels on the
left column are
selected.
The indicator flashes
to show that the
water levels on the
right column are
selected.
Amount of detergent (Approximately amount)
Display the necessary detergent amount and
water level.
2
The display of detergent amount (approximate amount) refers to the amount added with the
measuring spoon in the package of concentrated power detergent.
The usage benchmark of detergent amount (approximate amount) is the capacity of one
measuring spoon (about 37g). (Other detergent 22)
37 22
The capacity of measuring spoon depends on the brand of detergent, so please refer to the
description on the detergent package.
The diagram example of detergent measuring spoon only stands for the approximate amount.
Please put in the detergent as
much as 80% of the capacity of
measuring spoon (about 30g).
80% 30
Put the laundry in, turn the power
ON, choose the appropriate
process, and press the START
button.
1
The pulsator rotates with absence of wa-
ter to check the washing load (cause no
damage to clothes)
Put the detergent in. 19~21
19~21
3
Put detergent fabric softener bleach and
close the lid.
After the display of the detergent amount and
water level, please add in detergent in one
minute, and close the lid, otherwise it will
sound alarm. (at that time, if the "WATER
LEVEL" button is pressed, the washing ma-
chine will not wait any more and start rotating)
1
After the washing basket is filled with water
or begins operating, the replenishing deter-
gent shall be thrown into the basket directly.
Jean
20
How to Use Liquid Detergent, Bleach and Fabric Softener
Start the washing machine with water in the washing basket, and the infiltration washing can't perform then. Please put the
detergent in the washing spinning basket.
Put the detergent in the detergent dispenser
Powder synthetic detergent
When water is adhering to the detergent dispenser, please wipe it first.
When the detergent adheres to the dispenser, it remains even the dispenser is
closed. If the detergent still adheres to the dispenser after 2 or 3 times of repetitive
open and close, please remove the dispenser for cleaning up. ( 54)
2 3
( 54)
Please pay attention to keep the detergent away from the injection opening of
fabric softener, so as to avoid malfunction.
Some types of detergent may be hard to dissolve.
In this case, please inject the detergent into the washing basket directly after it
sufficiently dissolves.
In the case of bulky laundry, sometimes it may be hard to open the detergent
dispenser.
In this case, please move the laundry to the opposite side of injection opening, then
open the dispenser.
Only after closing the detergent dispenser can the operation begin. The laundry
may be damaged under the operation with the dispenser open.
The detergent dispenser can be opened as much as about 90 degrees. Any action
to open it by force may cause damage.
90
How to install the detergent dispenser
Insert the pin into the pin hole at the injection opening.
How to uninstall the detergent dispenser
1 Bend the detergent dispenser.
2 Disassemble the pin off the pin hole.
Pin hole
Pin
Notes
2
Pour in the detergent
Lint filter
1
Open the detergent
dispenser
3
Close the deter-
gent dispenser
Injection opening
Detergent dispenser
Pin
Pin hole
90
Detergent
dispenser
1 / 1

Hitachi AJ-S55GZ ユーザーマニュアル

カテゴリー
洗濯機
タイプ
ユーザーマニュアル

他の言語で