Korg SV-2 ユーザーガイド

Address

KORG ITALY SpA

Via Cagiata, 85

60027 Osimo (AN)

Italy

Web

www.korg.com

MAN0010143

3M

Quick Guide

Prise en main

Schnellstart

Guida rapida

Guía Rápida

电子琴用户手册

The lightning ﬂash with arrowhead

symbol within an equilateral trian-

gle, is intended to alert the user to

the presence of uninsulated “dan-

gerous voltage” within the prod-

uct’s enclosure that may be of suf-

ﬁcient magnitude to constitute a risk of electric

shock to persons.

Le symbole d’éclair dans un triangle équi latéral

est destiné à avertir l’utilisateur de la présence

d’une tension dangereuse non isolée au sein du

produit. Cette tension est sufﬁsante pour consti-

tuer un risque d’électrocution.

Der Blitz in einem gleichwinkligen Dreieck bedeu-

tet, dass das Gerät nicht isolierte Spannungen

erzeugt, die einen Stromschlag verursachen kön-

nen.

La freccia all’interno di un triangolo equilate-

ro avverte l’utente che all’interno del prodotto

sono presenti elementi “con tensione elettrica

pericolosa”, dall’intensità sufﬁciente a indurre

uno shock elettrico alle persone.

El símbolo del rayo signiﬁca que existen vol-

tajes peligrosos y sin aislar en el interior de la

unidad, que pueden ser de magnitud suﬁciente

para constituir un riesgo de electrocución para

las personas.

在等边三角形内带箭头的闪电标志旨在提醒用户，

产品的机壳内存在无绝缘的“危险电压”，足以对

人身构成触电危险。

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of im-

portant operating and maintenance

(servicing) instructions in the litera-

ture accompanying the product.

Le point d’exclamation dans un triangle équila-

téral avertit l’utilisateur de la présence d’impor-

tantes consignes de manipulation ou d’entretien

dans la documentation accompagnant ce pro-

duit.

Das Ausrufezeichen in einem gleichwinkli-

gen Dreieck soll den Anwender auf wichtige

Bedienhinweise aufmerksam machen, die in der

beiliegenden Dokumentation enthalten sind.

Il punto esclamativo all’interno di un triango-

lo equilatero avverte l’utente della presenza di

importanti istruzioni relative al funzionamento

e alla manutenzione nella documentazione che

accompagna il prodotto.

El signo de admiración indica al usuario que exis-

ten instrucciones de funcionamiento y manteni-

miento importantes en el manual que acompaña

al producto.

在等边三角形内带惊叹号的标志是提醒用户，设备

附带的文件资料内有重要的操作和维护说明。

This symbol is intended to identify

Class II equipment with functional

earthing (grounding).

Ce symbole désigne du matériel de

classe II à double isolation (fonction-

nelle et matérielle).

Dieses Symbol weist auf ein Gerät der Schutz-

klasse II mit Funktionserde hin.

Questo simbolo identiﬁca i dispositivi di Classe II

predisposti con la messa a terra.

Este símbolo se utiliza para identiﬁcar equipo

Class II que dispone de toma de tierra funcional.

左边标志识别带功能性接地的等级II设备。

この記号は、機能接地接続を備えているクラスⅡ機

器であることを示すものです。

|1

English

ENGLISH

2| English

Important safety instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install

in accordance with the manufacturer’s in-

structions.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other ap-

paratus (including ampliﬁers) that produce

heat.

9. Do not defeat the safety purpose of the po-

larized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding type plug has two blades

and a third grounding prong. The wide blade

or the third prong are provided for your safe-

ty. If the provided plug does not ﬁt into your

outlet, consult an electrician for replacement

of the obsolete outlet.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit

from the apparatus.

11. Only use attachments/accessories speciﬁed

by the manufacturer.

12. Use only with the cart, stand, tripod, brack-

et, or table speciﬁed by the manufacturer, or

sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning

storms or when unused for long periods of

time.

14. Refer all servicing to qualiﬁed service per-

sonnel. Servicing is required when the appa-

ratus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into

the apparatus, the apparatus has been ex-

posed to rain or moisture, does not operate

normally, or has been dropped.

▪ The ventilation should not be impeded by

covering the ventilation openings with items,

such as newspapers, table-cloths, curtains,

etc.

▪ No naked ﬂame sources, such as lighted can-

dles, should be placed on the apparatus.

▪ Do not install this equipment in a conﬁned

space such as a box for the conveyance or

similar unit.

▪ WARNING – This apparatus shall be connect-

ed to a mains socket outlet with a protective

earthing connection.

▪ Turning off the standby switch does not com-

pletely isolate this product from the power

line, so remove the plug from the socket if

not using it for extended periods of time,

or before cleaning. Please ensure that the

mains plug or appliance couple remains

readily accessible.

▪ Mains powered apparatus shall not be ex-

posed to dripping or splashing and that no

objects ﬁlled with liquids, such as vases, shall

be placed on the apparatus.

▪ Install this product near the wall socket and

keep the power plug easily accessible.

▪ The marking plate is located at the bottom

of the instrument. The model number, serial

number, power requirements, etc., are locat-

ed on this plate.

Serial number

Please record the model number, serial num-

ber, and date of purchase below. Keep this

manual, as use these information as a record

of your purchase.

Model ________________________________

Serial No. _____________________________

Purchase Date ________________________

|3

English

Precautions

Automatic power-off

To avoid wasting power, and to extend the life of

the valve, SV-2 will by default automatically en-

ter standby mode after two hours of non-active

use (playing, pressing buttons or moving knobs).

Please save any edited data before taking a pro-

longed pause.

Replacing the valve

Valves, like light bulbs, have a indeterminate

lifespan. When the valve fails, please contact

an Authorized KORG Service Center to re-

place it. DO NOT TRY TO REPLACE THE VALVE

YOURSELF, as you risk seriously damaging the

instrument and risk receiving an electric shock.

In addition, this action will void the warranty.

Data handling

Data in memory may sometimes be lost due to

improper use. Be sure to save important data

to the supplied Editor/Librarian software. KORG

will not be responsible for damages caused by

data loss.

Cleaning

If the exterior becomes dirty, wipe it with a

clean, dry cloth. Do not use liquid cleaners such

as benzene or thinner, or cleaning compounds

or ﬂammable polishes.

Trademarks

Acrobat and PDF are registered trademarks of

Adobe Systems Incorporated. Mac and iOS are

registered trademarks of Apple, Inc. Android is a

trademark of Google Inc. MS-DOS and Windows are

registered trademarks of Microsoft Corporation.

All other trademarks or registered trademarks

are the property of their respective holders.

Disclaimer

The information contained in this manual have

been carefully revised and checked through.

Due to our constant efforts to improve our prod-

ucts, the speciﬁcations might differ to those

in the manual. KORG is not responsible for any

differences found between the speciﬁcations

and the contents of the instruction manual – all

speciﬁcations being subject to change without

prior notice.

Liability

KORG products are manufactured under strict

speciﬁcations and voltages required by each

country. These products are warranted by the

KORG distributor only in each country. Any

KORG product not sold with a warranty card or

carrying a serial number disqualiﬁes the prod-

uct sold from the manufacturer’s/distributor’s

warranty and liability. This requirement is for

your own protection and safety.

Service and user’s assistance

For service, please contact your nearest

Authorized KORG Service Center. For more in-

formation on KORG products, and to ﬁnd soft-

ware and accessories for your keyboard, please

contact your local Authorized KORG distributor.

For up-to-date information, please point your

web browser to our web site.

Keep your keyboard up-to-date

Your instrument can be constantly updated as

new versions of the operating system are re-

leased by KORG. You can download the operat-

ing system from our web site. Please, read the

instructions supplied with the operating system.

4| English

Table of Contents

Introduction ........................................................5

Welcome aboard! .......................................................5

Before starting to play… .................................................5

Controls and connections .............................................7

Front panel ............................................................7

Rear panel .............................................................8

Turning the SV-2 on ..................................................11

Turning the power on and off ............................................11

Adjusting the master volume ........................................... 12

Listening to the demos ................................................. 12

Playing the sounds ..................................................13

What do we mean by ‘sound’? ........................................... 13

Factory and favorite sounds ............................................ 13

Selecting the factory sounds ........................................... 14

Selecting the favorite sounds ........................................... 15

The sounds ........................................................... 16

Using the effects ...................................................21

The effects ........................................................... 21

Saving the changes to a sound ..........................................22

Advanced settings ..................................................23

The advanced settings buttons ..........................................23

Transposing ..........................................................23

Changing the touch sensitivity ..........................................25

The Local Off .........................................................26

Don’t panic! ...........................................................26

Calibrating the pedals ..................................................27

Locking the control panel ..............................................28

Factory restore of all settings ...........................................28

Speciﬁcations ......................................................29

Introduction |5

English

Introduction

Welcome aboard!

Many thanks, and congratulation on purchasing the KORG SV-2 Stage

Vintage Piano. We’re sure it’ll give you countless hours of great vintage pia-

no and keyboard tones that will feel as good as they sound!

To maximize your chances of enjoying a long and happy relationship with

your SV-2, please read this manual at least once, and (as they say), “use the

product as directed”. Keep the manual for future reference after you’ve read

it; you’ll want to re-read it later at some point to pick up cool tips you may

have missed the ﬁrst time around.

This guide refers to both the 88- and 73-keys versions of the SV-2, and to the

versions with and without integrated speakers. There is no other difference

between the four instruments, apart for the keybed length, the speakers

(and the weight!).

Before starting to play…

What’s in the box

After you buy your SV-2, please check all the following items are included in

the package. If some of them are missing, immediately contact your KORG

dealer.

▪ SV-2 Stage Vintage Piano

▪ Quick Guide (the one you are reading now)

▪ Music stand

▪ KORG DS-2H damper pedal (supporting half-pedalling)

▪ Standard IEC AC power cable

6| English

What you can download

Point your web browser to our web site (www.korg.com), to download the

SV-2 Editor software, a MIDI driver, up-to-date software, various support ma-

terials, and the complete User Manual.

What you can add

After having purchased SV-2, you might want to add these other ﬁne options:

▪ The elegant KORG ST-SV1 keyboard stand, recommended for safety and

comfort, perfectly matching your piano design.

▪ One of the sturdy pedals and footswitches from the KORG catalogue, like the

DS-1H damper, the PS-1 and PS-3 footswitches, the EXP-2 foot controller, the

XVP-10 or XVP-20 volume/expression pedals.

▪ Our practical and robust CB-SV carrying bag.

Contacts

Your KORG dealers not only deliver this instrument, but also carry hardware

and software accessories, as well as useful information on how to use these

products. Ask them for any help you should eventually need.

Our international web site is www.korg.com. A list of all KORG Distributors

can be found in our dedicated web page (www.korg.com/us/corporate/dis-

tributors/).

Controls and connections |7

English

Controls and connections

Front panel

The front panel is where you access your SV-2 controls.

3

2

1

2

1 Control panel

This strip contains the buttons, knobs and the other controls of the piano.

2 Speakers (only SV2-73S and SV2-88S)

In the models with integrated speakers, this is where the sound comes from.

3 HEADPHONES jack (stereo)

Connect a pair of headphones to this connector ( ). You can use head-

phones with an impedance of 16-200 Ohms (50 Ohms suggested). When

connecting the headphones, the integrated speakers are automatically de-

activated.

Adjust the output level with the MASTER VOLUME knob.

8| English

Rear panel

The back panel is where you can ﬁnd most of the connections.

1

2

3 4 5 6 7 8

1 AC IN POWER connector

Connect the included IEC power cable here.

2 MUSIC STAND holes

A music stand comes standard with your SV-2. Insert its legs into these two

dedicated holes.

3 USB DEVICE connector

Use this connector to connect a computer for sequencing (this doubles the

MIDI ports), or for using the SV-2 Editor software for ﬁne editing. Before

using this connector, please install on your Windows PC the KORG USB-MIDI

Driver (the relevant instructions are provided together with the MIDI Driver,

that can be downloaded from our web site).

For the latest information on OS support, please see our dedicated web page

(https://www.korg.com/support/os/).

4 SPEAKERS ON/OFF switch (only models with integrated speakers)

Use this switch to turn the integrated speakers on or off.

5 PEDAL jacks (DAMPER, 1, 2)

Connect the supplied KORG DS-2H pedal, or the optional DS-1H, to the

DAMPER jack. This jack always operates as a damper pedal.

Controls and connections |9

English

Connect a footswitch (like the optional KORG PS-1 or PS-3) to the PEDAL 1

jack. The footswitch can operate as a sostenuto pedal, or as a rotary slow/

fast switch (when the rotary effect is selected).

Connect a footswitch (like the optional KORG PS-1 or PS-3) or a volume/ex-

pression pedal (like the optional KORG XVP-10, XVP-20, EXP-2) to the PEDAL

2 jack. The footswitch operates as a soft pedal. The volume/expression pedal

operates as a volume control (this is the default setting) or as a wah ﬁlter

control (when the wah effect is selected). To control the wah effect turn the

Auto/Pedal LED on in the PRE FX section (Pedal mode).

While the KORG DS-2H pedal comes already calibrated, the volume/expres-

sion pedal usually requires calibration to make use of the full range of values.

Calibration can also be used to choose a footswitch polarity. To calibrate the

pedals (and set their polarity), see “Calibrating the pedals” on page 27.

6 MIDI connectors (IN, OUT)

By using MIDI you can control the SV-2 from a sequencer, or control an ex-

ternal MIDI device from the SV-2. When using the SV-2 to control an external

MIDI device, or to record into a sequencer, press the LOCAL OFF button to

turn its LED on; this disconnects the keyboard from the internal sounds (but

not from MIDI).

MIDI OUT transmits MIDI data. Use it when you want to control a connected

external MIDI device or computer. Use a standard MIDI cable to connect it to

the MIDI IN connector of the other device.

MIDI IN receives MIDI data. Use it when you want to control the SV-2 from a

connected external MIDI device or computer. Use a standard MIDI cable to

connect it to the MIDI OUT connector of the other device.

7 INPUT jacks (L/MONO, R/MONO)

Connect a line-level source, like a keyboard/synthesizer, a CD or audio play-

er, to these jacks. For mono connections, use either of them.

8 OUTPUT jacks (L/MONO, R/MONO)

These are analog output jacks, available either in 1/4” unbalanced jacks, or

XLR balanced jacks. Either use the unbalanced 1/4” jacks for shorter run, or

the XLR balanced jacks for longer runs, like when playing on stage. In any

case, they are perfect replica the one of the other.

If you need mono output, connect either of the MONO 1/4” jacks. XLR jacks

cannot be used for mono output.

HINT: XLR balanced outputs are recommended whenever possible.

WARNING: If you connect the XLR jacks to a mixer or similar device, be sure to turn

off the phantom power of that device. The SV-2 might be damaged if you fail to do so.

10| English

VOX

Synthesizer, etc.

MIDI

IN OUT

OUTPUT

OUTPUT INPUT AUX/LINE IN INPUT/LINE IN

INPUT/LINE IN INPUT/LINE IN

Computer

USB cable

USB

Volume/

Expression

pedal

Footswitch 2

(Sostenuto

pedal)

Footswitch 1

(Soft pedal)

PHONES

Headphones

Damper pedal

(supplied)

Power

AC IN

CD/audio player, etc.

Ampliﬁer

Audio system

Mixer, recorder, etc.

Powered monitors

Audio

interface

(only SV2-73S

and SV2-88S)

Turning the SV-2 on |11

English

Turning the SV-2 on

Turning the power on and off

1 Connect the included IEC power cable to the POWER connector on the back

of the instrument.

2 Connect the power plug to an AC power outlet.

3 Press and release the POWER switch in the control panel to turn the instru-

ment on. The valve will light up and start warming up. After a few seconds,

the instrument will turn on.

The SV-2 contains a 12AX7 (ECC83) valve (“vacuum tube”).

WARNING: The valve cover or the valve may break if either is subjected to impact.

If the valve cover breaks, please have it replaced. Failure to replace a damaged valve

cover may lead to the valve itself becoming damaged.

NOTE: When you turn on your KORG SV-2, you may notice a brief ﬂash in the tube.

This is a characteristic of certain tubes we use and if it occurs, it only happens when

your SV-2 is turned on and the tube is not yet warm. This does not affect the perfor-

mance of either the tube or the SV-2.

4 To turn the instrument off, keep the POWER switch pressed for about one

second.

12| English

Adjusting the master volume

You can set the overall volume of the SV-2.

▪ Turn the MASTER VOLUME knob clockwise to increase the volume, count-

er-clockwise to decrease it.

This knob controls the overall volume of the instrument, both of the integrat-

ed speakers, the Left and Right outputs, and the Headphones jack.

WARNING: Always keep the volume at a comfortable level. Excessive volume may

cause permanent hearing damage.

Listening to the demos

Listen to the built-in demo songs to appreciate the power of the SV-2. There

are several demo songs to choose from.

1 Press the TRANSPOSE and LOCAL OFF buttons together. Their LEDs will

start blinking.

2 At this point, if you wait a few seconds all the demo songs will be played back.

3 Otherwise, you can select one of the available demo songs. There is one

demo for each of the factory sounds.

▪ Use the TYPE and VARIATION knobs in the SOUND section to select a demo

song.

▪ You can press the VARIATION knob, to make its LED turn green, and listen to

a second bank of demo songs. Press the VARIATION knob again to turn its

LED orange again, and return to the ﬁrst bank.

You can select any demo even after the automatic playback has started.

4 Adjust the listening volume with the MASTER VOLUME knob.

5 Stop the demo by pressing the TRANSPOSE and LOCAL OFF buttons again.

Playing the sounds |13

English

Playing the sounds

What do we mean by ‘sound’?

In SV-2, a sound is a ‘timbre’ or a set of timbres that can be heard when you

play the keyboard. Each sound can be made of up to three ‘programs’, each

one with a different timbre or a set of accessory ‘noises’, like the mechanics

of the keyboard, hammer-slap, etc. One or two layers can be added to the

main program, and be heard as a second or third timbre mixing with the

main timbre. Take for example the case of the universally known “piano plus

strings” sound: there are a program of piano, one of piano noises, one of

strings.

Main, Layers 1, 2

Main, Layer (1)

Split

There are sounds where the keyboard is split in two halves, with one or two

programs on the right half. The third program is moved to the left half, and

can be used to play an accompaniment (an upright bass, a synth pad, or the

like).

Main, Layers 1, 2

Main, Layer (1)

Split

Factory and favorite sounds

SV-2 has 72 factory sounds, and every one of these sounds can be “custom

tweaked” using just the knobs on the front panel. You can then save the

changes into the 64 FAVORITES locations of favorite sounds. (More detailed

editing can be performed using the SV-2 Editor software).

Please note that, in general, going from one sound to another happens with

a smooth transition, so that you can keep the notes pressed and hear the

new sound only at the next note change. However, if one of the sounds has

the ampliﬁcation section turned on and makes use of the valve, this is not

possible.

14| English

Selecting the factory sounds

How to select a sound

The SOUND section is where you can select the factory sounds.

1 Use the TYPE knob of the SOUND section to select a base type of sound

(one of six).

2 Use the VARIATION knob of the SOUND section to select one of the varia-

tions of the base sound (one of six). Notice that the LED next to the knobs

lights up to show the selected sound and variation.

3 Press the VARIATION knob to select the second bank of variations (the LED

color will change to green). Use the same VARIATION knob to select one of

the variations in the second bank (one of six).

4 When you want to return to the ﬁrst bank of variations, press the VARIATION

knob again (the LED color will return orange again).

Playing the sounds |15

English

Selecting the favorite sounds

How to select a favorite sound

The FAVORITES section is where you can select the favorite sounds, con-

taining your own custom sounds.

1 To select a favorite sound in the current bank, press the corresponding

FAVORITES (1-8) button.

If you want to see which bank is selected, press the TYPE knob and see

which FAVORITES (A-H) button is blinking. Press it again to exit from the

bank select mode (or wait until it turn off).

2 To select a favorite in a different bank, press the TYPE knob. The current-

ly selected bank is shown by the FAVORITES (A-H) button that is blinking.

Press the FAVORITES (A-H) button corresponding to the bank to be select-

ed. Then press the FAVORITES (1-8) button corresponding to the favorite to

be selected.

How to return to the latest selected factory sound

After having selected a favorite sound, you can select a factory sound again,

by using the procedure seen above.

However, you can immediately jump to the latest selected factory sound.

Press the VARIATION knob in the SOUND section to select it.

16| English

The sounds

The following table contains the names and a brief description of each of the

included sounds.

When the name of the sound is a straight one (like “MK I Suitcase”) it is a

simple sound extended to the full keyboard. When it has an ‘&’ in the middle

(like “FM Piano & Pad”), it is made of a main program an one or two layers.

When it has a ‘/’ in the middle (like “Pad/Mini Lead”), the keyboard is splitted

between different programs.

Factory sounds

You can select a factory sound from an external MIDI device by sending to

SV-2 a Control Change #00 message with a value of 0, a Control Change #32

message with a value of 0, then a Program Change (PC) message to select

the sound.

Sound Var PC Notes

EP 1 (Vintage)

MK I Suitcase A1 0 Two versions of the iconic MK I, a must-have for any

keyboard player.

MK I Stage B1 6

MK II Suitcase A2 1 Two ﬂavors of the magniﬁcent MK II, in the portable

and the heavier versions.

MK II Stage B2 7

MK V Stage A3 2 The MK V Stage (the only one that went in produc-

tion), well known for its bell-like sound.

MK V Bright B3 8

Dyno EP A4 3 The typical Dyno Piano sound, perfect for ballads in

the soft version, ready for a solo in the bright one.

Dyno EP Bright B4 9

Wurly A5 4 The standard punchy sound of Wurly metal reeds. The

pop sound of the ’60s and the ’70s.

Wurly Classic B5 10

Wurly Dark A6 5 A darker and a brighter version of the Wurly.

Wurly Bright B6 11

EP 2 (Various)

FM Piano 1 A1 12 The FM electric piano sound that made the ’80s. As

heard in countless records at the beginning of the

digital music age.

FM Piano 3 B1 18

FM Piano 2 A2 13

FM Piano & Pad B2 19 The FM piano + layered pad is another staple of the

era.

Playing the sounds |17

English

Sound Var PC Notes

Pianet T A3 14 The Pianet, the German electro-mechanical vintage

keys. The euro version of the electric piano.

Pianet N B3 20

Hybrid Piano A4 15 Hybrid combinations of pianos, to explore new piano

soundscapes.

Hybrid Tine B4 21

Wurly & Strings A5 16 Different combinations of electric pianos and strings.

Choose between reeds and FM.

FM & Strings B5 22

MK II & Pad A6 17 Different combinations of electric pianos and pads.

Again, choose between tines and FM.

FM & Pad B6 23

Piano 1 (Acoustic)

German Grand A1 24 The king of the acoustic pianos — the German grand so

universally beloved by classical, jazz and pop pianists.

German Classic B1 30

Italian Grand A2 25 The Italian grand piano, a ﬁnest choice for the classi-

cal and jazz repertoire.

Italian Bright B2 31

Japanese Grand A3 26 Another must-have — a Japanese grand, preferred by

many classical, jazz and pop artists.

Japanese Bright B3 32

Austrian Grand A4 27 The Austrian emperor’s grand — a milestone for classi-

cal programs, and the preferred by some jazz artists.

Austrian Classic B4 33

Japanese Upright A5 28 A big Japanese upright piano, with a very resonant

sound.

Upright Bright B5 34 An intimate, yet bright piano sound, frequently used

by popular pop bands.

German Upright A6 29 This is the distinctive, mellower sound of a German

upright piano.

Rock Piano B6 35 An aggressive upright for rock and rockabilly tunes.

Piano 2 (Various)

Electric Grand A1 36 Electro-acoustic piano produced in the ’70s, with a

unique mellow sound very popular within gigging mu-

sicians.

German Mono B1 42 A mono version of the German grand.

KORG M1 Piano A2 37 The KORG piano heritage. From the popular M1 synth

workstation that made an era, and from our pioneeris-

tic SG-1D digital piano.

KORG SG-1D B2 43

Digital Piano A3 38 An innovative, accurate and expressive piano sound,

created in the late ’80s with a popular digital key-

board/synthesizer.

Electra Piano B3 44 A popular electronic piano from the ’70s, used by

many famous classic rock and prog-rock musicians.

18| English

Sound Var PC Notes

Tack Piano A4 39 Tack and Honky-Tonk pianos, to enjoy rag-time and

stride genres.

Honky-Tonk B4 45

Piano & Strings A5 40 Layered piano and strings or pad. Perfect for evoca-

tive ambient music.

Piano & Pad B5 46

Piano & Synth A6 41 Layers of piano and synth or brass. Two mixes calling

back to the age of the fusion jazz.

Piano & Brass B6 47

Clavier

Clav AC A1 48 The classic electric clavichord, two ﬂavors with mics

in phase.

Clav AD B1 54

Clav BC A2 49 Two different conﬁgurations of the Clavi registers,

with mics in reversed phase and an edgier sound.

Clav BD B2 55

Harpsichord A3 50 Back to late-Renaissance and Baroque with the grand-

pa of the piano. Standard 8” and 8”+4” double octave

registrations.

Harpsichord Oct. B3 56

Perc. Organ A4 51 True classic electro-mechanical organ emulation, with

percussion, in a clean and a distorted version.

Rock Organ B4 57

Jazz Organ A5 52 Jazz registration of the classic electro-mechanical

organ.

Vox Organ B5 58 A perfect emulation of “Connie”, the VOX Continental

transistor organ.

Church Organ A6 53 The full power of a majestic pipe organ.

Pipe Organ B6 59 Softer and emotional registrations of a pipe organ, for

the more meditative moments.

Other

Full Strings A1 60 Two different ﬂavors of classical strings sounds.

Classic Strings B1 66

Tape Strings A2 61 The synthetic Mello strings from the ’70s.

Strings & Voices B2 67 Real strings with added voices.

Warm Pad A3 62 Dark and bright version of the typical synth pads.

Bright Pad B3 68

Orchestra A4 63 A powerful orchestral Tutti.

Pizzicato & Glock B4 69 Pizzicato orchestral strings and glockenspiel.

Brass A5 64 A real brass section.

Synth Brass B5 70 The synth brass counterpart.

Pad/Mini Lead A6 65 Two solo synths playing on top of a soft synth pad.

Pad/SynthLead B6 71

ページが読み込まれています...

Korg SV-2 ユーザーガイド

Korg SV-2 ユーザーガイド

他の言語で

関連論文

その他のドキュメント