Panasonic EHTNA9J 取扱説明書

Thank you for purchasing the Panasonic product.

• This product is intended for household use only.

• Please read these instructions carefully to use the product correctly and safely.

• Before using this product please give your special attention to “Safety

Precautions” (P. EN3–EN7).

• Please keep these Operating Instructions and the warranty for future use.

感谢您购买

Panasonic

产品。

→

•

本产品仅限家庭使用。

→

•

请仔细阅读这些说明，正确、安全地使用本产品。

→

•

使用本产品前，请特别注意“安全注意事项”（第

SC3

-

SC7

页）。

→

•

请将保修证与本使用说明书一起妥善保管。

感謝您購買

Panasonic

產品。

→

•

本器具僅供家庭使用。

→

•

請仔細閱讀這些指示，以正確安全地使用器具。

→

•

使用本器具前，請特別留意→「安全注意事項」（第

TC3

-

TC7

頁）。

→

•

請將保用證與使用說明書保存在一處安全地方。

このたびは、パナソニック製品をお買い上げいただき、まことにありがとう

ございます。

• この製品は家庭用です。

• 取扱説明書をよくお読みのうえ、正しく安全にお使いください。

•

ご使用前に「安全上のご注意」（JP3 〜 JP7ページ）を必ずお読みください。

• 取扱説明書と保証書は大切に保管してください。

Operating Instructions

取扱説明書

Model No. EH‑TNA9J

EH9210TNA9J1F1116-0

PrintedinChina

English

简体中文繁體中文

日本語

Hair Dryer

Household

ヘアードライヤー

家庭用

EH-TNA9J.indb 1 2016/09/01 12:21:51

Contents

Safety precautions .............EN3

Parts identification ...............EN8

How to use the hair dryer ........EN12

Maintenance of the hair dryer .....EN17

Check periodically ..............EN19

Troubleshooting ................EN20

Specifications .................EN20

安全注意事项

...................SC3

部件名称

......................SC8

如何使用电吹风

................SC12

电吹风的保养

..................SC17

定期检查

.....................SC19

故障排除

.....................SC20

规格

.........................SC20

安全須知

......................TC3

零件說明

......................TC8

使用風筒的方法

................TC12

保養風筒

.....................TC17

定期檢查

.....................TC19

疑難排解

.....................TC20

規格

.........................TC20

安全上のご注意

................JP3

各部のなまえとはたらき

..........JP8

使いかた

.....................JP12

お手入れのしかた

..............JP17

定期確認のお願い

..............JP19

修理を依頼される前に

...........JP20

定格・仕様

....................JP20

EH-TNA9J.indb 2 2016/09/01 12:21:51

English

To reduce the risk of injury, loss of life, electric shock, re, malfunction, and damage to

equipment or property, always observe the following safety precautions.

■ The following symbols are used to classify and describe the level of hazard,

injury, and property damage caused when the denotation is disregarded and

improper use is performed.

WARNING

Denotes a potential hazard that could result in

serious injury or death.

CAUTION

Denotes a hazard that could result in minor injury or

property damage.

■ The following symbols are used to classify and describe the type of instructions

to be observed.

This symbol is used to alert

users to a specic operating

procedure that must not be

performed.

This symbol is used to alert users to

a specic operating procedure that

must be followed in order to operate

the unit safely.

Some parts of the safety precaution illustrations differ from the actual product.

WARNING

Plug and Cord

⿟Do not use with the cord bundled.

(Doing so may cause re or electric shock.)

⿟Do not damage or modify, or forcefully bend, pull, or twist the cord.

Also, do not place anything heavy on or pinch the cord.

(Doing so may cause electric shock or re due to a short circuit.)

⿟Do not use when the plug or cord is damaged or hot.

⿟Never use the appliance if the plug ts loosely in a household outlet.

(Doing so may cause burn, electric shock, or re due to a short circuit.)

⿟Do not connect or disconnect the plug to a household outlet with a wet

hand.

(Doing so may cause electric shock or injury.)

⿟Do not wrap the cord tightly around the main body when storing.

(Doing so may cause the wire in the cord to break with the load,

and may cause electric shock or re due to a short circuit.)

Safety precautions

Please observe

EN3

EH-TNA9J.indb 3 2016/09/01 12:21:51

Safety precautions

WARNING

Plug and Cord

⿟Disconnect the plug by holding onto it instead of pulling on the cord.

(Failure to do so may cause the wire in the cord to break, and may cause

burn, electric shock, or re due to a short circuit.)

⿟Regularly clean the plug to prevent dust from accumulating.

(Failure to do so may cause re due to insulation failure caused by humidity.)

→Disconnect the plug and wipe with a dry cloth.

⿟Always turn OFF the power switch and disconnect the plug from the

household outlet after use.

(Failure to do so may cause re or burn.)

⿟Fully insert the plug.

⿟Use the household outlet alone: do not use with an extension cord.

⿟Always use with an 220V

power supply.

(Failure to do so may cause re or electric shock.)

⿟When the appliance is used in a bathroom, unplug it after use since the

proximity of water presents a hazard even when the appliance is

switched off.

⿟For additional protection, the installation of a residual current device

(RCD) having a rated residual operating current not exceeding 30mA is

advisable in the electrical circuit supplying the bathroom.

→Ask your installer for advice.

⿟If the supply cord is damaged, it must be replaced by the manufacturer,

its service agent (described in the warranty), or similarly qualied

persons in order to avoid a hazard.

(Failure to do so may cause an accident or injury.)

EN4

EH-TNA9J.indb 4 2016/09/01 12:21:51

English

WARNING

In case of an abnormality or malfunction

⿟Immediately stop using and remove the plug if there is an abnormality

or malfunction.

(Failure to do so may cause re, electric shock, or injury.)

⿠Air is not emitted

⿠Unit stops sporadically

⿠Interior becomes red hot and smoke is emitted

→Immediately request inspection or repair at an authorized service center

(described in the warranty).

Maintenance

⿟When you see sparks around the air outlet while using

the hot air setting, stop use and remove the lint on the

air outlet and air inlet.

(Failure to do so may cause burn or re.)

This appliance

⿟Do not block or insert hair pins or other foreign objects

into the air inlet, air outlet, nanoe™ outlet or mineral ion

outlet.

(Doing so may cause re, electric shock, or burn.)

⿟Do not leave the area with the power switch left on.

(Doing so may cause re.)

⿟Do not use in proximity of ammable materials (such as alcohol,

benzine, thinner, spray, hair care product, nail polish remover).

(Doing so may cause an explosion or re.)

EN5

EH-TNA9J.indb 5 2016/09/01 12:21:51

Safety precautions

WARNING

This appliance

⿟Never modify, disassemble, or repair.

(Doing so may cause ignition or injury due to abnormal operation.)

→Contact an authorized service center (described in the warranty) for repair.

⿟Do not store within the reach of children or infants. Do not let them use it.

(Doing so may cause burn, electric shock, or injury.)

⿟Do not use the appliance with a wet hand.

(Doing so may cause electric shock or re due to a short circuit.)

⿟This appliance is not designed for commercial use, and is not intended

for use without appropriate maintenance.

(Doing so may cause burn or re due to a continuous load or overload.)

⿟Do not immerse the appliance in water.

⿟Do not use this appliance near bathtubs, showers, basins or other

vessels containing water.

⿟Do not place in a location where water may spill (such as top of a vanity).

(Doing so may cause re or electric shock.)

This symbol on the appliance means “Do not use this

appliance near water”.

⿟If you feel pain or abnormality on your skin or other part of your body,

immediately stop using this product.

(Failure to do so may cause problems with the skin or body.)

⿟This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for

their safety.

Children should be supervised to ensure that they do not play with the

appliance.

(Failure to do so may cause an accident or injury.)

EN6

EH-TNA9J.indb 6 2016/09/01 12:21:52

English

CAUTION

To protect your hair

⿟Do not use with the air inlet damaged.

(Your hair may get tangled in the air inlet, which could damage the hair.)

⿟Keep a distance of over 3cm between the air outlet and your hair.

(Failure to do so may cause burns to the hair.)

10 cm

3 cm

⿟Be sure to keep your hair at least 10cm

away from the air inlet.

(Your hair may get tangled in the air inlet,

which could damage the hair.)

Note the following precautions

⿟Do not store the cord in a twisted state.

(Doing so may cause the wire in the cord to break

with the load, and may cause electric shock or  re

due to a short circuit.)

⿟Do not drop or subject to shock.

(Doing so may cause electric shock or ignition.)

⿟Only use for drying or styling human hair or for skin. (Do not use on

pets, or to dry clothing, shoes, etc.)

(Doing so may cause  re or burn.)

⿟Do not use on children or infants.

⿟Do not touch the air outlet which will become very hot.

(Doing so may cause burn.)

⿟When unfolding or folding the handle, do not touch the shaded area as

shown in  gures below.

(Failure to do so may cause  nger injury.)

⿟ Close your eyes when blowing air on

your face in skin care mode.

(Failure to do so may cause eye problems.)

EN7

EH-TNA9J.indb 7 2016/09/01 12:21:52

nanoe™ outlet

Mineral ion outlet

Air outlet

Quick‑dry nozzle

(P. EN11)

Mode indicator

Mode switching

button

nanoe™ ion charge

plus panel (P. EN11)

Ring for hanging

Plug

Handle

Bushing

Cord

Power switch

Air inlet

3 : Turbo

2 : Dry

1 : Set

0 : Off

Parts identication

EN8

EH-TNA9J.indb 8 2016/09/01 12:21:53

English

◆

Mode indicator and mode explanation

Switch mode with mode switching button

⿟The appliance will enter hot air mode when the power switch is turned on.

Hot air mode

Intelligent temperature control mode

[HOT] Red

When the power

switch is set to

[3] or [2]

Press and hold

the mode

switching button

for 1 second or

more to switch

[HOT] Red blinking

⿟ Hot air blows. ⿟ The appliance detects the

surrounding air temperature and

blows air at a comfortable

temperature for drying.

Hot/Cold alternating mode

For hot air

[

] Yellow [HOT] Red

Automatic

switching

For cold air

[

] Yellow [COLD] Blue

⿟ The appliance detects the surrounding air temperature and switches between hot and cold

air at appropriate intervals.

For power switch [3] or [2] For power switch [1]

Cold air mode Skin care mode

[COLD] Blue [COLD] Blue [SKIN] Yellow

⿟ Cold air blows. ⿟ Weak cold air for skin care blows.

Scalp care mode

[SCALP] Green

⿟ Gentle hot air for scalp care blows.

⿟In all modes, the nanoe™ lamp glows, and air including nanoe™ and mineral ion blows.

⿟When [HOT], [ ] (hot/cold alternating mode) hot air, [SCALP] is selected, cold air

blows around the hot air, helping set your hair and making your hair shiny.

(Continued)

EN9

EH-TNA9J.indb 9 2016/09/01 12:21:54

nanoe™ and double mineral* effect

Controls waviness by balancing hair moisture content, making hair glossy

and easy to style.

In addition to making hair strong against damage from brushing etc., limits the

inuence of UV on hair, leading to beautiful hair.

* “Double mineral” means mineral ions generated by two zinc electrodes.

Mineral ion outlet

What is nanoe™, mineral ion?

What is nanoe™?

nanoe™ is water‑wrapped particulate ion, generated by applying high voltage to split

water.

Their diameter is smaller than approx. 1/100 of steam and they cannot be seen

by the eye.

nanoe™ may not be generated depending on the usage environment because

nanoe™ is generated by collecting moisture in the air. In low temperatures and low

humidity it becomes difcult to collect moisture from the air. In this case,

ions are generated.

What is mineral ion?

Ions generated by a zinc electrode that cannot be seen by the eye.

(nanoe™, mineral ion generation method: high voltage discharge)

Parts identication

EN10

EH-TNA9J.indb 10 2016/09/01 12:21:54

English

nanoe™ ion charge plus panel

Hair is negatively charged when nanoe™ or mineral ions are

continuously applied. Negatively charged hair repulses nanoe™

and mineral ions, making it hard for nanoe™ and mineral ions to

be applied to the hair.

When this occurs, simply by holding the nanoe™ ion charge plus

panel together with the handle, the negative charge accumulated

on hair is released.

By doing this, nanoe™ and mineral ions can continue to penetrate the hair, supplying

moisture and moisturizing the hair thoroughly right up to the tip.

Quick‑dry nozzle

(Image)

Soft

airow

Quick‑dry

nozzle

Strong

airow

You can increase the drying rate by using the

vertical strong and weak airows to dry and

loosen bundles of damp hair.

⿟The quick‑dry nozzle cannot be removed.

Notice

Results of nanoe™, mineral ions and hot/cold

alternating mode (P. EN12) on hair vary according to

the individual, and the following people may nd it

hard to experience an effect.

⿟People with curly hair

⿟People with strong wavy hair

⿟People with smooth hair that can be easily set

⿟People who have had a straightening perm within 3

to 4 months

⿟People with short hair

Curly hair Wavy hair

EN11

EH-TNA9J.indb 11 2016/09/01 12:21:54

How to use the hair dryer

Preparation

1 Use a towel to partially dry your hair.

2Then brush or comb your ngers to remove tangles.

3Plug into the household outlet.

Dry your hair

1

Select airflow strength using the

power switch.

Select [3] or [2] with the power switch.

2

Direct warm air throughout your

hair.

Key Point

Your hair will dry quickly if you direct the warm air

towards the roots.

3

When the hair is about 90% dry, use the hot/

cold alternating mode to finish it well, making

the hair shiny.

Select [ ] with the mode switching button.

Key Point

In order to thoroughly apply hot and cold air, part your

hair to the left and right to dry it.

1

Apply the hot/cold alternating mode while running your

ngers through your hair from the inside. (One side)

2 Apply the hot/cold alternating mode while running

your ngers through your hair from the top of your

head to the tip of your hair. (One side)

3Also perform 1 and 2 on the opposite side.

EN12

EH-TNA9J.indb 12 2016/09/01 12:21:54

English

4

Set the power switch to [0].

5

Remove the plug from the household outlet.

⿟When drying is complete,  nish with a brush or your  ngers.

⿟After the hair dryer has cooled down suf ciently, keep it in a place with low

humidity.

Caution

⿟Keep a distance of over 3cm between the air outlet

and your hair.

⿟Keep the appliance at least 10cm away from your hair

so that it is not sucked into to the air inlet.

⿟Be careful not to bump the air inlet such as on the

corner of a desk.

Note

In order to continue using the appliance for a long time, check it regularly. (P. EN19)

Notice

Styling and treatment agents etc. can be used.

However, if you use sticky substances such as oil, gel or wax, the intended effect of

nanoe™ and mineral ion may become dif cult to achieve.

Since nanoe™ and mineral ions are generated, you might encounter the following.

⿟Water droplets may be blown out of the nanoe™ outlet during use.

⿟You may hear a noise from the nanoe™ outlet or the mineral ion outlet.

⿟You may notice a characteristic smell during use.

10 cm

3 cm

(Continued)

EN13

EH-TNA9J.indb 13 2016/09/01 12:21:54

How to use the hair dryer

Skin care mode

Keep skin, that is easy to dry out after bathing, moist and soft by applying air

including nanoe™ and mineral ions.

Do this after drying your hair following procedure 3 on P.EN12

1 Select [1] with the power switch.

2 Select [COLD] with the mode switching button.

3 Place the air outlet at a distance of about 20cm from

your chin and apply air for about 1minute, moving the

appliance to the left and right.

⿟Use with your eyes closed.

⿟Perform skin care using lotion or milky lotion, in the

same way and timing as normal.

Scalp care mode

Moisture remaining on the surface of bare skin leads to discomfort,

such as stickiness.

Gently dries bare skin with hot air at approx. 50°C*.

Do this after drying your hair by about 70% following procedure 2 on P.EN12

1Select [SCALP] with the mode switching button.

2 Lift your hair by hand and dry your scalp.

⿟You may feel cold depending on the ambient

temperature. In this case, move the appliance

further away from your scalp on [HOT] and apply air.

3Select [HOT] with the mode switching button and dry

your hair overall.

* When the room temperature is 23°C

EN14

EH-TNA9J.indb 14 2016/09/01 12:21:54

English

Intelligent temperature control mode

At times when it is unpleasantly hot and humid, such as after bathing in

summer, the hot air temperature is controlled automatically depending on the

room temperature, to allow comfortable drying.

*Air temperature

Room temperature (

°C)

* The description of the air temperature is based on IEC standard.

approx.

90°C

10 20

30

approx.

50°C

Do this when you wish to reduce the hot sensation of hot air following

procedure 2 on P.EN12

1 Press and hold the mode switching button for

1second or more when using HOT [3] or [2].

([HOT] changes to blinking)

2 Dry your hair overall.

⿟Press and hold the mode switching button again for

1second or more to return to normal hot air.

⿟The appliance will return to hot air mode once the

power switch is turned off.

(Continued)

EN15

EH-TNA9J.indb 15 2016/09/01 12:21:54

How to use the hair dryer

◆To increase hair volume

Lift the base of your hair and apply the hot

air from the bottom to the top.

For top For inner hair

◆To decrease hair volume

Run your hand through your hair in the same direction as

the hair ow, and apply hot air from the top to bottom.

◆To set your hair

1 Dampen the area of your hair you want to set with water etc.

⿟Massage your hair so that water etc. penetrates to the inner side.

2 Select [1] with the power switch.

3Select [HOT] with the mode switching button and

apply hot air.

◆To make your hair setting last longer

Apply cold air to the area of your hair you want to set after applying hot air.

Notice

Wave perms may temporarily become easy to stretch when you apply nanoe™ and

mineral ion to your hair, but return to their original state when you apply water or

styling agents.

EN16

EH-TNA9J.indb 16 2016/09/01 12:21:55

English

Maintenance of the hair dryer

Always turn the power switch off and disconnect the plug from the

household outlet. (Except when performing maintenance on the air outlet)

Do this about once a month or over

If foreign matter such as dust becomes attached and blocks the appliance, in addition

to causing the performance to drop, it may cause the following symptoms.

⿠Sparks may be seen from the interior when using hot air.

These sparks are caused by the thermostat switch, the protective device, and this is

not dangerous.

⿠ Hot air repeatedly turns into cold air.

⿠ Hot air becomes abnormally hot.

Air inlet

Wipe to clean lint, hair, or other matter from

the air inlet with a tissue or toothbrush.

If dust is attached to the inside,

remove it with a vacuum cleaner.

Vacuum

cleaner

Note

Do not press or rub with your nails or sharp items.

Doing so may cause the air inlet to break.

Air outlet

1 Plug into the household outlet.

2 Select [1], [2] or [3] with the power switch.

3 Select [COLD] with the mode switching button.

4 While scraping dust and hair jammed in the mesh

with a cotton swab, blow them away with air.

Note

When performing maintenance, do not block the air inlet with your hand.

Notice

Dust may y out when you use the appliance for the rst time after maintenance.

Use the appliance after conrming that dust no longer ies out.

(Continued)

EN17

EH-TNA9J.indb 17 2016/09/01 12:21:55

Maintenance of the hair dryer

At least once a month

•nanoe™ outlet

•Mineral ion outlet

In order to maintain the generation amount of nanoe™ and mineral ion.

1Prepare a commercially available new

cotton swab.

2Moisten the tip of the cotton swab with

water.

3 Gently insert the swab in the nanoe™

outlet and the mineral ion outlet until it

stops (about 10mm), and then turn the

cotton swab 2‑3 times carefully.

nanoe™ outlet

Mineral ion outlet

Notice

It is easier to clean the nanoe™ outlet and the mineral ion outlet with a narrow

cotton swab (for example, one intended for babies).

Do this when dirty

Main body

To clean the hair dryer (when it is dirty), soak a cloth in the

soapy water and squeeze it out rmly, then wipe with the cloth.

Note

⿟Do not use substances such as alcohol, nail polish

remover or detergent (hand soap).

Doing so may result in malfunction or part cracks or

discoloration.

⿟Do not leave the appliance with hairdressing products or

cosmetics on it.

Doing so will cause deterioration of the plastic, leading to

discoloration and cracks.

alcohol

nail

polish

remover

EN18

EH-TNA9J.indb 18 2016/09/01 12:21:55

English

In some cases you may use the hair dryer for a long time without noticing

that there is a fault.

For safety reasons, check on a regular basis.

□ Is there any dust accumulated

in the air outlet or air inlet?

→ Perform maintenance. (P. EN17)

→ If something is abnormal, contact

the authorized service center

(described in the warranty).

□

Are the screws loose causing the appliance to be open or is it partially deformed?

When hot air is blowing, do any of the following symptoms occur?

□ There is abnormal noise or vibration.

□ Air comes out or stops when the appliance is moved.

□ There is a burning smell.

□ The appliance (handle) is abnormally hot.

□ Air comes out or stops or part of the plug or cord is abnormally hot even

when a tight socket is used.

□ Air  ow is weak.

□ Air is not emitted.

□ The inner part of the air outlet

becomes red.

Smoke may appear at the same time

as the symptoms described to the left.

This smoke indicates that the

protection device (thermal fuse) is

operating.

→ If even one of these items occurs, stop using

the appliance and contact the authorized

service center (described in the warranty).

Check periodically

EN19

EH-TNA9J.indb 19 2016/09/01 12:21:55

Troubleshooting

Problem Possible cause Action

Sparks can be seen

inside the appliance when

using [HOT].

These sparks are caused

by the thermostat switch,

the protective device, and

this is not dangerous.

Dust is attached to the

air inlet or air outlet.

Hair or something is

blocking the air inlet.

Remove the attached dust.

(P. EN17)

Hot air repeatedly turns

into cold air.

Do not block the air inlet.

The hot air is abnormally

hot.

The power plug is

abnormally hot.

The power plug is not

firmly inserted into the

outlet.

Use an outlet in which the

power plug fits snugly.

Sparks are generated

inside the nanoe™ outlet.

The needle‑shaped part

located at the back of the

nanoe™ outlet is dirty.

Perform maintenance on

the nanoe™ outlet.

(P. EN18)

A noise (crackling) is

heard inside the nanoe™

outlet.

There is a peculiar smell.

This is because nanoe™ and mineral ion produce a

peculiar smell; there is no influence to your body.

Water droplets y out

from the nanoe™ outlet.

Water droplets occasionally fly out from when

generating nanoe™; this is not an abnormality.

The [HOT] lamp is blinking

quickly (twice per second).

Device abnormality.

Please consult an

authorized service center

(described in the warranty).

Specications

Power source

220V

50Hz

Power consumption

1 800W (When using [HOT] [3])

EN20

EH-TNA9J.indb 20 2016/09/01 12:21:55

ページが読み込まれています...

Panasonic EHTNA9J 取扱説明書

Panasonic EHTNA9J 取扱説明書

他の言語で

関連論文

その他のドキュメント