Sony SRS-ZP1000 は、2.1chのスピーカーシステムです。映画や音楽など、さまざまなコンテンツを臨場感あふれるサウンドで楽しむことができます。また、コンパクトな設計なので、場所を取らずに設置できます。
主な特長は、以下の通りです。
- 2.1chのスピーカーシステムで、迫力のあるサウンドを実現
- 映画や音楽など、さまざまなコンテンツを臨場感あふれるサウンドで楽しめる
- コンパクトな設計で、場所を取らずに設置できる
- ヘッドホン端子を搭載しているので、深夜でも気兼ねなく音楽を楽しむことができる
Sony SRS-ZP1000 は、ご自宅でのエンターテイメントをより充実させてくれるスピーカーシステムです。
Sony SRS-ZP1000 は、2.1chのスピーカーシステムです。映画や音楽など、さまざまなコンテンツを臨場感あふれるサウンドで楽しむことができます。また、コンパクトな設計なので、場所を取らずに設置できます。
主な特長は、以下の通りです。
- 2.1chのスピーカーシステムで、迫力のあるサウンドを実現
- 映画や音楽など、さまざまなコンテンツを臨場感あふれるサウンドで楽しめる
- コンパクトな設計で、場所を取らずに設置できる
- ヘッドホン端子を搭載しているので、深夜でも気兼ねなく音楽を楽しむことができる
Sony SRS-ZP1000 は、ご自宅でのエンターテイメントをより充実させてくれるスピーカーシステムです。
English
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
WARNING
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
To reduce the risk of electrical shock, do not open the
cabinet. Refer servicing to qualified personnel only.
To reduce the risk of fire, do not cover the ventilation of the
apparatus with newspapers, tablecloths, curtains, etc. And
do not place lighted candles on the apparatus.
To reduce the risk of fire or electric shock, do not place
objects filled with liquids, such as vases, on the apparatus.
Do not install the appliance in a confined space, such as a
bookcase or built-in cabinet.
Connect the unit to an easily accessible AC outlet.
Should you notice an abnormality in the unit, disconnect
the main plug from the AC outlet immediately.
CAUTION
You are cautioned that any changes or modification not
expressly approved in this manual could void your
authority to operate this equipment.
NOTICE FOR THE CUSTOMERS IN THE USA
This symbol is intended to alert the user to
the presence of uninsulated “dangerous
voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute
a risk of electric shock to persons.
This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
For the Customers in Canada
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
Precautions
On safety
• The nameplate indicating operating voltage, power
consumption, etc., is located on the rear exterior.
• Before operating the system, be sure that the operating
voltage of the system is identical with that of your local
power supply.
Where purchased Operating voltage
U.S.A./Canada 120 V AC, 60 Hz
European countries 220 – 230 V AC, 50 Hz
China 220 - 230 V AC, 50 Hz
Other countries 220 – 230 V AC, 50 Hz
• The unit is not disconnected from the AC power source
(mains) as long as it is connected to the wall outlet, even
if the unit itself has been turned off.
• Unplug the system from the wall outlet if it is not to be
used for an extended period of time. To disconnect the
cord, pull the cord by grasping the plug. Never pull the
cord itself.
• Should any liquid or solid object fall into the system,
unplug the system’s power cord and have the system
checked by qualified personnel before operating it any
further.
• The AC power cord should be changed only at a
qualified service shop.
• For efficient heat dissipation, ensure there is sufficient
space to the rear of the left speaker. Also, avoid placing
objects on the unit.
• Do not insert your hand or any objects into the hole of
speaker.
On operation
• Do not drive the speaker system with a continuous
wattage exceeding the maximum input power of the
system.
• Before connecting, turn off the Speaker system, the PC
and the audio component to avoid damaging the speaker
system.
• The volume level should not be turned up to the point of
distortion.
• Although this system is magnetically shielded, do not
leave recorded tapes, watches, personal credit cards or
floppy disks using magnetic coding in front of the
system for an extended period of time.
If the TV picture or monitor display is
magnetically distorted
Although this system is magnetically shielded, there may be
cases that the picture on some TV sets/personal computers
may become magnetically distorted. In such a case, turn off
the power of the TV set/personal computer once, and after
15 to 30 minutes turn it on again. In the case of a personal
computer, take appropriate measures, such as data storage,
before turning it off.
When there seems to be no improvement, locate the system
farther away from the TV set/personal computer.
Furthermore, be sure not to place objects in which magnets
are attached or used near the TV set/personal computer,
such as audio racks, TV stands, toys etc. These may cause
magnetic distortion to the picture due to their interaction
with the system.
On placement
• Do not set the speakers in an inclined position.
• Do not leave the system in a location near heat sources,
or in a place subject to direct sunlight, excessive dust,
moisture, rain or mechanical shock.
On cleaning
Do not use alcohol, benzine, or thinner to clean the cabinet.
If you have any questions or problems concerning your
speaker system, please consult your nearest Sony dealer.
Hooking up the system
1
Connect the left speaker to the right speaker
with the supplied cable.
(see fig.
A
)
Be sure to match the + (red) and – (black) wires and
connectors for the left and right speakers.
Note
Do not connect any other speakers to this system. A
malfunction of this system or the connected
component may result. The sound will not be
produced if you miss-connect the + and – wires and
connectors.
2007 Sony Corporation Printed in Malaysia
Operating Instructions
Active Speaker System
SRS-ZP1000
2-318-426-41(1)
Owner’s Record
The model number and the serial number are located on the rear of the left speaker.
Record the model number and the serial number in the space provided below. Refer to them whenever you call upon your
Sony dealer regarding this product.
Model No. SRS-ZP1000
Serial No.
A
B
Rch IN Rch OUT
Right speaker (rear) Left speaker (rear)
Right speaker
(rear)
Left speaker
(rear)
to INPUT2 jack
To LINE OUT or to
headphones jack
(stereo mini jack)
to INPUT1 jack
to wall outlet
Connecting cord (supplied)
Portable audio
player, etc
PC, etc.
CD/MD
player, etc.
* “WALKMAN” and “WALKMAN”
logo are registered trademarks of
Sony Corporation.
Be sure to match the + (red) and – (black)
wires and connectors for the left and right
speakers.
To LINE OUT or to
headphones jack
(stereo mini jack)
Connecting cord (not supplied)
2
Connect the left speaker to the source
equipment.
(see fig. B)
Note
To switch INPUT1 and INPUT2, use ON/OFF of the
device connected to the speakers.
3
Connect the left speaker to the wall outlet.
4
Position the speakers. (see fig. C)
Listening to the sound (see fig. D)
First, turn down the volume on the left speaker. The
volume should be set to minimum before you begin
playing the programme source.
1
Press POWER on the left speaker.
The POWER indicator lights up.
Press POWER on the left speaker to turn it on, and
then press OPERATE on the left speaker.
The OPERATE indicator lights up green.
2 Adjust the VOLUME control.
When connecting to the headphone output, also
adjust the volume of the connected component.
After listening, press the POWER switch
(4 OFF).
The POWER indicator goes off.
To adjust the bass volume level
Turn the BASS dial on the left speaker to adjust the
bass volume. Set the bass volume to an undistorted
level to prevent system damage.
On the sound mode
You can enjoy the best performance of the source by
using the SOUND MODE dial.
–MOVIE: enjoy movies or games on the PC with full
bass tones and clear high tones.
–MUSIC: enjoy music with clear fidelity.
The system can recognize strong sounds and change
the frequency for each sound mode. You can get the
best bass frequency for each sound mode by turning
the BASS dial.
3 Using headphones/earphones
Connect headphones/earphones to the PHONES
jack.
Note
Turn off the MEGA BASS or BASS BOOST
(Walkman, etc.) function as it may cause audible
distortion.
Note
If connecting the speaker to a device with a built-in radio
or tuner, radio reception may not occur or sensitivity may
be reduced significantly.
Troubleshooting
Should you encounter a problem with your speaker
system, check the following list and take the indicated
measures. If the problem persists, consult your nearest
Sony dealer.
There is no sound from the speaker system.
• Make sure all the connections have been correctly made.
• Make sure the volume on the left speaker and the
connected component have been turned up properly.
• Check if headphones are connected. If they are,
disconnect them.
The sound is distorted.
• Turn down the volume level on the connected
component. Or, if the connected component has the bass
boost function, set it to off.
•Rotate VOLUME on this unit to reduce the volume.
There is hum or noise in the speaker output.
• Make sure all the connections have been correctly made.
• Make sure none of the audio components are positioned
too close to the TV set.
The sound has suddenly stopped.
Make sure all the connections have been correctly made.
The brightness of the POWER indicator is
unstable.
The brightness of the POWER indicator may become
unstable when the volume is turned up. This is not
malfunction.
Specifications
Speaker section
Speaker system 2 way
Speaker units 10 cm, cone type
2.5 cm, cone type
Enclosure type Bass reflex
Impedance 4 Ω
Amplifier section
Rated output 23 W + 23 W (10 % T.H.D., 1 kHz, 4 Ω)
Input impedance 4.7 kΩ (at 1 kHz)
Input Stereo mini jack (INPUT 1, INPUT 2)
General
Dimensions (w/h/d) Approx. 140 × 330 × 203 mm
(5
5
⁄
8
× 13 × 8 in.)
Mass Approx. 4,500 g (9 lb. 15 oz.) (L ch),
Approx. 2,800 g (6 lb. 3 oz.) (R ch)
Cord length Approx. 1.5 m (L to R)
Power consumptions 21 W
Cord length Approx. 2 m (power cord)
Design and specifications are subject to change without
notice.
About the INPUT 1 and INPUT 2 jacks
Connect to a portable audio player, PC, etc., with a headphones jack or LINE OUT jack. When the component
has both a headphones jack and a LINE OUT jack, connect to the LINE OUT jack of this system. If you connect to
the headphones jack of this system, turn down the connected component volume level to prevent audio
distortion.
*
* This switch is only for European models.
C
D
Left speaker
(front)
Right speaker
(front)
PC, portable audio
player, etc.
Left speaker (front)
Sound pressure
Frequency
BASS control image
MOVIE
MUSIC
POWERSOUND MODE BASS VOLUME PHONES
MIN MAX
MOVIE MUSIC
MIN MAX
BASS
SOUND MODE
POWER
(OPERATE for European model)
VOLUME
PHONES
•
•
120 V AC, 60 Hz
220 – 230 V AC, 50 Hz
220 - 230 V AC, 50 Hz
220 – 230 V AC, 50 Hz
•
•
•
•
•
•
•
•
•
•
•
•
1
A
2
B
3
4 C
A
B
Rch IN Rch OUT
*
D
1
2
4
–
–
3
•
•
•
•
•
•
•
Ω
Ω
Ω
× ×
*
*
C
D
POWERSOUND MODE BASS VOLUME PHONES
MIN MAX
MOVIE MUSIC
MIN MAX
BASS
SOUND MODE
POWER
VOLUME
PHONES
MOVIE
MUSIC
a ×
× aa aaa
× aa aaa
× aa aaa
× aa aaa
a
×
-
1
-
2
Sony SRS-ZP1000 は、2.1chのスピーカーシステムです。映画や音楽など、さまざまなコンテンツを臨場感あふれるサウンドで楽しむことができます。また、コンパクトな設計なので、場所を取らずに設置できます。
主な特長は、以下の通りです。
- 2.1chのスピーカーシステムで、迫力のあるサウンドを実現
- 映画や音楽など、さまざまなコンテンツを臨場感あふれるサウンドで楽しめる
- コンパクトな設計で、場所を取らずに設置できる
- ヘッドホン端子を搭載しているので、深夜でも気兼ねなく音楽を楽しむことができる
Sony SRS-ZP1000 は、ご自宅でのエンターテイメントをより充実させてくれるスピーカーシステムです。