Radiomaster TX12 ユーザーガイド

タイプ
ユーザーガイド

Radiomaster TX12は、初心者からプロフェッショナルまで幅広く使用できる、多用途な2.4GHzリモコンシステムです。固定翼機、グライダー、ヘリコプター、車、ボート、ロボット工学、マルチローター機など、あらゆるタイプのモデルを制御できます。

高性能オペレーティングシステムであるOpenTXを採用しており、カスタマイズ性が高く、複雑な制御も可能です。また、CC2500シングルチップ多プロトコル内蔵RFモジュールを搭載しており、さまざまなプロトコルに対応しています。これにより、さまざまな受信機と互換性があり、幅広いモデルで使用できます。

128×64モノクロLCDディスプレイを搭載し、視認性が高く、各種情報を表示することができます。高精度のポテンショメータジンバルを採用しており、滑らかな操作性と正確な制御が可能です。

また、最大16チャンネルに対応しており、複雑なモデルも制御

Radiomaster TX12は、初心者からプロフェッショナルまで幅広く使用できる、多用途な2.4GHzリモコンシステムです。固定翼機、グライダー、ヘリコプター、車、ボート、ロボット工学、マルチローター機など、あらゆるタイプのモデルを制御できます。

高性能オペレーティングシステムであるOpenTXを採用しており、カスタマイズ性が高く、複雑な制御も可能です。また、CC2500シングルチップ多プロトコル内蔵RFモジュールを搭載しており、さまざまなプロトコルに対応しています。これにより、さまざまな受信機と互換性があり、幅広いモデルで使用できます。

128×64モノクロLCDディスプレイを搭載し、視認性が高く、各種情報を表示することができます。高精度のポテンショメータジンバルを採用しており、滑らかな操作性と正確な制御が可能です。

また、最大16チャンネルに対応しており、複雑なモデルも制御

WWW.RADIOMASTERRC.COM
Quick start guide
TX12
Introduction
Thank you for purchasing the RadioMaster TX12 2.4g remote control system. The system is versatile and can
be used by beginners and professionals. In order to ensure the correct and safe use of this product, please
read this manual carefully before use. Due to constant improvements in software and hardware this manual
may change over time. The information contained in this manual is subject to change without notice. Visit our
website for the most up to date information.
TX12 remote control is suitable for all types of fixed-wing aircraft, gliders, helicopters, cars, boats, robotics,
multi-rotor aircraft and anything else you might create, if you can build it RadioMaster can control it. The TX12
uses a powerful operating system called OpenTX, for more information visit the links below.
-The RadioMaster team.
Many remote-control models are equipped with powerful motors and sharp propellers. When using or
maintaining models, proceed with caution. When performing assembly or maintenance, make sure to
disconnect the power to the model and remove the propellers.
Do not operate the TX12 remote control system under the following conditions:
• In severe weather or strong windy conditions, such as rain, hail, snow, storms or electromagnetic environ-
ments.
• In any situation where visibility is limited.
• In areas where people, property, high-voltage power lines, public roads, vehicles or animals may be present.
• If you feel tired or unwell, or under the influence of drugs or alcohol.
• If the remote control or model seems to be damaged or not working properly.
• In areas with high 2.4GHz interference or where 2.4GHz radio is prohibited.
• When the radios battery voltage is too low to be used.
• In areas where local regulations prohibit the use of aviation models.
Safety Information
Manual and firmware download
TX12 is pre-installed with factory approved OpenTX firmware. To download the latest software manual,
please visit the RadioMaster website: https://www.radiomasterrc.com
To download the latest firmware for your TX12 remote control, please visit the OpenTX website: https://ww-
w.open-tx.org
Important
ANTENNA: Install the provided antenna in the top of the radio BEFORE installing batteries and turning on the
radio. DO NOT operate the radio without the antenna installed and the internal RF module powered on. Doing
so will damage the internal RF module and will not be covered under warranty.
FIRMWARE: The TX12 is pre-installed with the most stable firmware at the factory at time of release. please
only attempt to update the firmware if you are confident in the process. Incorrect firmware updates may cause
the remote control to become inoperable.
1
Remote control overview
2
TX12 has a built-in USB-C charging function for 3.7v to 4.2v lithium battery. The charging circuit is only
suitable for 2x 3.7v Li-ion 18650 or 2x 3.7v Lipoly batteries (2s 7.4v Lipo battery pack), the nominal battery
voltage is 3.7v, and the maximum charging voltage is 4.2v.
Do not use LiFE battery packs or 18650 lithium-ion batteries with a nominal voltage of 3.6v to 4.10v. Charging
the incorrect type of battery may damage the charger or cause a fire.
Please check the voltage and condition of the battery regularly and never charge it unattended. Always charge
in a safe area away from combustible materials. If the remote control gets wet or damaged in any way, do not
charge it.
RadioMaster does not assume any responsibility for any adverse consequences caused by the use or misuse
of this product.
SF 3 PositionSE 3 Position
Trainer Port TYPE-C USB
SB 3 Position SC 3 Position
SD ButtonSA Button
S2 Slider PotS1 Slider Pot
Right GimbalLeft Gimbal
Power Button
MDL ButtonSYS Button
Trim Buttons
LCD Screen
Antenna
Handel
RTN Button
PAGE> Button
PAGE< Button
TELE Button
Menu Wheel
Model selection and protocol selection
Notes
Specifications
Size 170*159*108mm
Weight 363g
Frequency 2416-2466MHz
RF Chip Single-chip Multi-protocol CC2500
Supported Protocols Corona Hitec Futaba S-FHSSFrsky D16/D8RadioLink Graupner HoTT*
Transmitting Power 20dbm
Antenna Gain 2db
Working Current [email protected]
Voltage Range 6.6-8.4v DC
Range > 2km @ 20dbm (depending on receiver)
Radio Firmware OpenTXTransmitter/ Multi-Module RF module)
Channels Up to 16 (depending on receiver)
Display 128*64 Monochrome LCD display
Gimbal High precision potentiometer gimbals
External module JR/FrSKY/Crossfire compatible
Upgrade Method USB/SD card & OpenTX Companion PC software
* For the most up to date list on supported protocols please visit https://www.multi-module.org/
3
The TX12 comes with a CC2500 single-chip multi-protocol internal RF module, which is compatible with
several different protocols. To view the latest list of all compatible protocols, please visit https://www.-
multi-module.org/ Please note that new protocols will be constantly updated and added to the latest
firmware. Some new protocols may require firmware upgrades.
• Long press the MDL button to enter the model settings, select MULTI in the SETUP page, and select the
protocol to be used in the sub-options. The system will automatically turn on the corresponding RF
module according to the RF protocol you selected.
• Bind [BND] is used to start the binding process.
• Range [RNG] button can reduce the power to 1/30 to facilitate testing of remote-control distance.
OpenTX software is very powerful, and has a large number of programming and mixing functions. Please
download the comprehensive software installation guide from the link below for more detailed instructions:
https://www.open-tx.org or https://www.radiomasterrc.com
4
Warranty and repair
If there is any problem with your remote control hardware, please keep the proof of purchase and contact
the retailer where you purchased the TX12. You may also visit our warranty support page https://
www.radiomas-terrc.com/contact
Firmware update and OpenTX
For the latest information and firmware updates from the OpenTX open source firmware development team,
please visit the OpenTX website at https://www.open-tx.org.
EU Simple Declaration of Conformity
RadioMaster declares the radio equipment TX16s is in compliance with EU directives Directive
2014/53/EU. Full text of the declaration of conformity is available at the following website www.radio-
masterrc.com
Manufacturer by
ShenZhen RadioMaster Co., Ltd
5th Floor, Yutian Building, No. 18 Yangtian Road, Xin’an Street, Baoan District, Shenzhen, Guangdong.
FCC ID: 2AV3G-TX12
FCC Information
This equipment has been tested and found to comply with the limits for Part 15 of the FCC rules.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation. Full text of
the declaration of conformity is available at the following website www.radiomasterrc.com
CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment. This product contains a radio transmitter with
wireless technology which has been tested and found to be compliant with the applicable
regulations governing a radio transmitter in the 2.400GHz to 2.4835GHz frequency range.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
The device should be suitable for general population/uncontrolled exposure limits, which
average 1.6 W/kg in any 10 g tissue. The maximum SAR test result is 0.407W/kg. The test
distance is 0mm. In order to meet the RF exposure requirements, the minimum distance
between the user's limbs and the remote control (including the antenna) is 0mm.
5
简介
感谢您购买RadioMaster TX12 2.4g遥控系统。 该系统用途广泛,可供初学者和专业人士使用。 为了确保正确、
安全地使用本产品,请在使用前仔细阅读本使用说明书。 由于版本升级,已经进行了更改。 本手册中包含的信
息如有更改,恕不另行通知。
TX12遥控器适用于所有类型的固定翼、滑翔机、直升机和多旋翼飞机。 可以根据使用的航空器选择型号类型,并
可以使用各种混合功能。
-RadioMaster 团队敬上.
许多遥控模型都配备了强大的电机和锋利的螺旋桨。 使用模型时,请谨慎行事。 进行组装或维护时,请确保
已断开模型的电源并卸下螺旋桨。
在以下情况下,请勿操作TX12遥控系统:
在恶劣天气或强风条件下,例如雨,冰雹,下雪,暴风雨或电磁环境中。
在能见度有限的任何情况下。
在可能存在人员、财产、电力高压线、公共道路、有车辆或动物的区域。
如果您感到疲倦或不适,或在药物或酒精的影响下。
如果遥控器或模型似乎已损坏或无法正常工作。
在2.4GHz干扰较大的区域或禁止使用2.4GHz无线电的地方。
当电池电压太低而无法使用时。
在当地法规禁止使用航空模型的区域。
安全须知
说明书和固件下载
TX12预装标准的OpenTX固件。 要下载最新的软件手册,请访问RadioMaster网站: https://www.radiomas-
terrc.com
要为您的TX12遥控器下载最新的固件,请访问OpenTX网站: https://www.open-tx.org
警告!
TX12出厂时预装最稳定的固件。 如果您有经验并且有信心更新系统固件,请仅更新固件。 不正确的更新可
能会导致遥控器无法操作。
6
遥控器概述
电源和充电注意事项
TX12内置USB-C充电功能,可用于3.7v至4.2v的锂电池。该充电电路仅适用于2x 3.7v锂离子18650电池或2x
3.7v Lipoly电池(2s 7.4v Lipo电池组),标称电池电压为3.7v,最大充电电压为4.2v。
不要使用标称电压为3.6v至4.10v的寿命电池组或18650锂离子电池。给不正确的电池充电可能会损坏充电
器或引起火灾。
请定期检查电池的电压和状态,切勿在无人看管的情况下充电。总是在远离易燃材料的安全区域充电。如
果遥控器湿了或损坏了,不要给它充电。
RadioMaster不承担因使用或误用本产品而造成的任何不良后果。
天线
提手
SF三段开关SE三段开关
DSC教练插口 TYPE-C USB
SB三段开关 SC三段开关
SD按键开关SA按键开关
S2电位器滑块S1电位器滑块
右摇杆左摇杆
电源开关
MDL按键SYS按键
SRTN按键
TELE按键
PAGE>右翻页
PAGE<左翻页
数字微调
导航滚轮及ENT按键
显示屏
7
模型选择及协议选择
TX12附带CC2500单芯片多协议高频模块,拥有并兼容几种不同协议, 要查看所有兼容协议的最新列表,请访问
https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md 。
请注意,新协议会不断更新并被添加到最新固件中, 新的某些协议可能需要升级固件。
请长按MDL按钮进入模型设置,在SETUP页面中选择MULTI,并在子选项中选择需要使用的协议。系统
根据您选择的射频协议,会自动开启对应的射频模块,同时关闭其它三个射频模块。系统在同一时间只会开
启一个射频模块,以确保没有多余的无线电信号相互干扰。
Bind按钮用于启动对频过程。
Range按钮可将功率降低至1/30,以方便测试遥控距离。
注意
OpenTX软件非常强大,并且具有大量的编程和混控功能。请从下面的链接下载综合软件安装指南
以获取更详细的说明:https://www.open-tx.org
技术指标
规格尺寸: 170*159*108毫米
重量: 363克
传输频率: 2.400GHZ-2.480GHZ
发射器模块: 单芯片多协议高频模块(CC2500)
支持的协议: Corona 、Hitec、Futaba S-FHSS、Frsky D16/D8、RadioLink、Graupner HoTT……
发射功率: 最大20dbm
天线增益: 2db
工作电流: [email protected]
工作电压:6.6-8.4v DC
遥控距离: > 2km @ 20dbm
开源固件: OpenTX(遥控器)
DIY-Multiprotocol-TX-Module(高频模块)
通道数: 最多16个通道(取决于接收器)
 显示:128*64单色LCD显示器
摇杆: 电位器版/霍尔版(具体配置根据购买产品类别而定)
外置模块:JR/FrSKY兼容模块插座
升级方法: 支持USB在线/SD卡离线升级
协议: 多协议CC2500支持的所有协议(有关CC2500支持的协议列表,请访问
https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md)
8
保修及维修
固件更新和OpenTX信息
用户手册
欧盟认证合格声明
制造商
深圳RadioMaster有限公司
广东省深圳市宝安区新安街道72区杨田路德至高科技园9栋5楼
RadioMaster无线电设备TX12符合欧盟指令2014/53/EU。符合性认证声明的全文可在以下
网站上找到:www.radiomasterrc.com
如果您的遥控器硬件出现任何问题,请保留购买证明并与您购买TX12的零售商联系。
有关OpenTX开源固件开发团队的最新资讯和固件更新,请访问OpenTX网站,网址为
https://www.open-tx.org 。
有关TX12 OpenTX系统固件的详细用户手册,请访问https://www.open-tx.org
FCC ID: 2AV3G-TX12
FCC 认证信息
警告:
安全的天线距离
T该设备已经过测试,符合FCC规则第15章的规定。操作必须符合以下两个条件:
(1)此设备不会造成有害干扰
(2)此设备必须接受收到的任何干扰,包括可能导致意外操作的干扰。
符合性声明的全文可在以下网站上找到:www.radiomasterrc.com
未经负责合规方明确批准的更改或修改可能会使用户丧失操作设备的权限。
本产品包含具有天线技术的无线电发射器,该无线电发射器已经过测试,符
合适用于2.400GHz至2.4835GHz频率范围内的无线电发射器的适用法规。
操作RadioMaster发射器时,请确保您的身体(不包括手指,手,腕,脚踝和脚)与天线之间保
持至少20cm的距离,以符合FCC法规确定的RF暴露安全要求。
WWW.RADIOMASTERRC.COM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Radiomaster TX12 ユーザーガイド

タイプ
ユーザーガイド

Radiomaster TX12は、初心者からプロフェッショナルまで幅広く使用できる、多用途な2.4GHzリモコンシステムです。固定翼機、グライダー、ヘリコプター、車、ボート、ロボット工学、マルチローター機など、あらゆるタイプのモデルを制御できます。

高性能オペレーティングシステムであるOpenTXを採用しており、カスタマイズ性が高く、複雑な制御も可能です。また、CC2500シングルチップ多プロトコル内蔵RFモジュールを搭載しており、さまざまなプロトコルに対応しています。これにより、さまざまな受信機と互換性があり、幅広いモデルで使用できます。

128×64モノクロLCDディスプレイを搭載し、視認性が高く、各種情報を表示することができます。高精度のポテンショメータジンバルを採用しており、滑らかな操作性と正確な制御が可能です。

また、最大16チャンネルに対応しており、複雑なモデルも制御

他の言語で