Radiomaster CC2500 Zorro Radio Controller ユーザーガイド
- タイプ
- ユーザーガイド
Radiomaster CC2500 Zorro Radio Controller は、最も人気のある送信機プロトコルに対応したオープンソースかつ柔軟な送信機システムです。初心者にも上級者にも最適で、使いやすさとカスタマイズ性を両立しています。
Zorroは、エルゴノミクスデザインを採用し、手にフィットしやすく、長時間使用しても疲れにくい設計です。また、バックライト付きのLCDディスプレイと直感的な操作ボタンにより、設定や操作が簡単に行えます。
Zorroは、最大16チャンネルに対応し、様々な種類のドローンやラジコンカーを制御することができます。また、ミキシングやカーブ設定などの高度な設定にも対応しており、ユーザーの好みに合わせてカスタマイズすることができます。
Zorroは、OpenTXまたはEdgeTXを搭載しており、オープンソースのため、ユーザーはファームウェアを自由に更新したり、カスタマイズすることができます。また、Zorroには、Nanoサイズモジュールベイが搭載されており、様々な
Radiomaster CC2500 Zorro Radio Controller は、最も人気のある送信機プロトコルに対応したオープンソースかつ柔軟な送信機システムです。初心者にも上級者にも最適で、使いやすさとカスタマイズ性を両立しています。
Zorroは、エルゴノミクスデザインを採用し、手にフィットしやすく、長時間使用しても疲れにくい設計です。また、バックライト付きのLCDディスプレイと直感的な操作ボタンにより、設定や操作が簡単に行えます。
Zorroは、最大16チャンネルに対応し、様々な種類のドローンやラジコンカーを制御することができます。また、ミキシングやカーブ設定などの高度な設定にも対応しており、ユーザーの好みに合わせてカスタマイズすることができます。
Zorroは、OpenTXまたはEdgeTXを搭載しており、オープンソースのため、ユーザーはファームウェアを自由に更新したり、カスタマイズすることができます。また、Zorroには、Nanoサイズモジュールベイが搭載されており、様々な
WWW.RADIOMASTERRC.COM
Quick start guide
ZORRO
Introduction
Thank you for purchasing the RadioMaster ZORRO radio system. Advanced and highly-versatile, ZORRO is
adaptable for pilots of any skill level. To ensure safe and reliable operations, please read this manual carefully
prior to use.
As the software and hardware are constantly improved, the information contained in this manual is subject to
change without prior notice. Please visit our website for up-to-date information and radio firmware.
ZORRO is an open-sourced, ergonomic radio with powerful multi-protocol capability. Able to bind to most
contemporary protocols on the market, this is one radio to rule them all! ZORRO runs OpenTX, an
open-sourced operating system; for more information, please visit the OpenTX link below.
-The RadioMaster team
Radio-controlled models commonly contain sharp components like propellers, rotating at high RPMs; when
operating or maintaining the model, always use common sense and proceed with caution.
Always disconnect power to the model AND remove propellers (if applicable) during the assembly or
maintenance process.
Never operate the ZORRO radio system in the following conditions:
• In severe weather or strong windy conditions, such as rain, hail, snow, storms or electromagnetic environ-
ments.
• In limited visability
• In the proximity of other people, property, high-voltage power lines, public roads, vehicles or animals
• When feeling unwell, or under the influence of drugs or alcohol.
• If the ZORRO radio system/model is damaged or showing signs of interference.
• In areas with high 2.4GHz interference or where 2.4GHz radios are prohibited.
• When the TX/RX battery is low.
• In areas where local regulations prohibit the use of R/C aircraft.
Safety Information
Manual and firmware download
ZORRO is pre-installed with factory approved OpenTX or EdgeTX firmware. To download the latest manual or
stock factory firmware, please visit the RadioMaster website: https://www.radiomasterrc.com
To download the latest OpenTX firmware for your ZORRO radio system, please visit the OpenTX website:
https://www.open-tx.org
To download the latest EdgeTX firmware for your ZORRO radio system, please visit the EdgeTX website:
https://www.edgetx.org
Important
Zorro is pre-installed with the most stable firmware at the factory at time of release. please
only attempt to update the firmware if you are confident in the process. Incorrect firmware updates may cause
the remote control to become inoperable. Damage as a result of improper firmware update may not be
covered under warranty.
1
Remote control overview
2
ZORRO is powered by 2x 3.7V 18350 Lithium Ion cells and is charged using the built-in USB-C port. The
charging circuitry is designed for charging 2x 3.7V Lithium Ion batteries only. The nominal voltage is 3.7V and
the maximum charging voltage is 4.2V.
Never charge 3.6V LiFe and 3.6V 18350 Lithium Ion packs with the onboard charger. Charging or using the
wrong battery chemistry/polarity may cause permanent damage to the PCB and in certain situations cause
fires.
Check the voltage and condition of the battery regularly and never charge the device unattended. Only charge
in safe areas away from combustable materials. Refrain from charging the radio unit if it was exposed to water
or was damaged in any way. RadioMaster does not assume any responsibility for any adverse consequences
caused by the use or misuse of this product.
TYPE-C Charge Port
SH-Button
SD Card Slot
3.5mm
Headphone Jack
SG-Button
External Module Bay
USB Port
DSC Trainer Port
Power Button
SA-Button
SB-3 Position
SE-2 Position
S1-Pot
Left Gimbal
SYS Button
PAGE< Button
PAGE> Button
RTN Button
S2-Pot
LCD Screen
Trim Switchs
SF-2 Position
SC-3 Position
SD-Button
Right Gimbal
Speaker
Lanyard Loop
Antenna
MDL Button
TELE Button
Menu Wheel
Model selection and protocol selection
Notes
Specifications
Physical dimensions170*159*108mm
Weight350 grams
Operating frequency2.400GHz-2.480GHz
Internal RF OptionsCC2500 multi-protocol / 4-in-1 multi-protocol / ELRS 2.4GHz
Supported protocols Module dependent
RF powerCC2500 and 4-in-1: 20dBm max. / ELRS: 24dBm max.
Antenna gainFolding 2db
operational current: 160mA for cc2500 and 4 in 1. 400mA for ELRS 250mw .
Operational voltage6.6-8.4v DC
Control distance> 2km @ 20dBm
Operating systemOpenTX / EdgeTX Compatible
Control channelsMaximum 16 (Rx dependent)
Display 128*64 Monochrome LCD
Battery 2 x 18350 (Not included)
Charging Built in USB-C Charging
Firmware Upgrade methodVia USB or SD card (SD Not included)
GimbalHall-effect
Module bay Nano size (Compatible with TBS Nano Crossfire / Nano Tracer / IRC Ghost)
3
Depending on the package purchased, Zorro has a 4-in-1 quad-chip or a CC2500 single-chip multi-proto-
col module built in. To view the latest list of all compatible protocols, please visit https://www.-
multi-module.org/ Please note that new protocols will be constantly updated and added to the latest
firmware. Some new protocols may require firmware upgrades.
Long press the MDL button to enter the model settings, select MULTI in the SETUP page, and select the
desired
protocol in the sub-options. The system will automatically turn on the corresponding RF
module according to the RF protocol you selected.
• Bind [BND] is used to start the binding process.
• Range [RNG] button can reduce the power to 1/30 to facilitate testing of remote-control distance.
• Need add something here about bind ELRS.
OpenTX software is highly versatile, and has a large number of programming and mixing functions. Please
download the comprehensive software installation guide from the link below for more detailed instructions:
https://www.open-tx.org or https://www.radiomasterrc.com
4
Warranty and repair
Manual
Should any issues arise with your radio system's hardware, please keep the proof of purchase and contact the
retailer where you made the ZORRO purchase. . You may also visit our warranty support page https://www.ra-
diomasterrc.com/contact
The limited warranty covers defects in workmanship for one year from the date of purchase
To view the full manual for the ZORRO radio system, please visit the Radiomaster website
https://www.radiomasterrc.com
EU Simple Declaration of Conformity
Manufacturer by
RadioMaster declares the radio equipment ZORRO is in compliance with EU directives Directive
2014/53/EU. Full text of the declaration of conformity is available at the following website
www.radiomasterrc.com
411, Building 11,Shenzhen Bay Science and Technology Ecological Park, No.16, Keji South Road,
community, high tech Zone, Yuehai street, , Nanshan District, Shenzhen
FCC ID: 2A337ZORRO-
FCC ID: 2A337ZORRO
FCC Information
CAUTION:
Antenna Separation Distance
This equipment has been tested and found to comply with the limits for Part 15 of the FCC rules.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation. Full text of
the declaration of conformity is available at the following website www.radiomasterrc.com
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment. This product contains a radio transmitter with
wireless technology which has been tested and found to be compliant with the applicable
regulations governing a radio transmitter in the 2.400GHz to 2.4835GHz frequency range.
When operating your RadioMaster transmitter, please be sure to maintain a separation distance
of at least 20 cm between your body (excluding fingers, hands, wrists, ankles and feet) and the
antenna to meet RF exposure safety requirements as determined by FCC regulations.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.
Specific Absorption Rate (SAR) information:
This ZORRO ELRS meets the government's requirements for exposure to radio waves. The guidelines are based on
standards that were developed by independent scientific organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons
regardless of age or health.
FCC RF Exposure Information and Statement
– This radio is designed for and classified as “General population/uncontrolled Use”, the guidelines are based on
standards that were developed by independent scientific organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons
regardless of age or health.The exposure standard for wireless radio employs a unit of measurement known as the
Specific Absorption Rate, or SAR, the SAR limit set 1.6W/kg.
– Body-worn operation; this device was tested for typical body-worn operations with the back of the handset kept 0mm
for body worn. To maintain compliance with RF exposure requirements, use accessories that maintain a 0mm for body
worn. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The
use of accessories that do not satisfy these requirements may not comply with RF exposure requirements, and should
be avoided.
– The highest reported SAR value for worn on the body is 1.184 W/kg.
5
简介
感谢您购买RadioMaster ZORRO遥控系统。 该系统用途广泛，可供初学者和专业人士使用。 为了确保正确、安全
地使用本产品，请在使用前仔细阅读本使用说明书。 由于版本升级，已经进行了更改。 本手册中包含的信息如有更
改，恕不另行通知。
ZORRO遥控器适用于所有类型的固定翼、滑翔机、直升机和多旋翼飞机。 可以根据使用的航空器选择型号类型，并
可以使用各种混合功能。
-RadioMaster 团队敬上.
许多遥控模型都配备了强大的电机和锋利的螺旋桨。 使用模型时，请谨慎行事。 进行组装或维护时，请确保已
断开模型的电源并卸下螺旋桨。
在以下情况下，请勿操作ZORRO遥控系统：
• 在恶劣天气或强风条件下，例如雨，冰雹，下雪，暴风雨或电磁环境中。
• 在能见度有限的任何情况下。
• 在可能存在人员、财产、电力高压线、公共道路、有车辆或动物的区域。
• 如果您感到疲倦或不适，或在药物或酒精的影响下。
• 如果遥控器或模型似乎已损坏或无法正常工作。
• 在2.4GHz干扰较大的区域或禁止使用2.4GHz无线电的地方。
• 当电池电压太低而无法使用时。
• 在当地法规禁止使用航空模型的区域。
安全须知
说明书和固件下载
ZORRO支持强大的开源固件OpenTX以及EdgeTX。 要下载最新的软件手册，请访问RadioMaster官方网站：
https://www.radiomasterrc.com
要为您的ZORRO遥控器下载最新的OpenTX固件，请访问OpenTX网站： https://www.open-tx.org
要为您的ZORRO遥控器下载最新的EdgeTX固件，请访问EdgeTX网站： https://www.edgetx.org
警告！
ZORRO出厂时预装最稳定的固件。 如果您有经验并且有信心更新系统固件，请仅更新固件。 不正确的更新可
能会导致遥控器无法操作。
6
遥控器概述
SA-按钮
SB-3段开关
SE-2段开关
S1-拨轮 S2-拨轮
LCD显示屏
微调按钮
SF-2段开关
SC-3段开关
SD-按钮
右摇杆
扬声器
电源按键
挂带环
折叠天线
左摇杆
MDL按键
SYS按键
PAGE<左翻页
PAGE>右翻页
RTN按键
TELE按键
导航滚轮及ENT按键
SH-按钮 SG-按钮
外置模块插槽
TYPE-C充电接口
SD卡插槽 USB数据接口
3.5MM耳机接口 DSC教练接口
7
模型选择及协议选择
ZORRO附带4in1多协议高频模块，或CC2500单芯片多协议高频模块，拥有并兼容许多不同协议， 要查看所有兼
容协议的最新列表，请访问多协议官方网站：https://www.multi-module.org
请注意，由于ZORRO遥控器不同版本内置高频模块不同，系统中只会列出当前内置高频模块所支持的协议列表，
新协议会不断更新并被添加到最新固件中， 新的某些协议可能需要升级固件。
· 请长按MDL按钮进入模型设置，在SETUP页面中选择MULTI，并在子选项中选择需要使用的协议。系统根据
您选择的射频协议，会自动开启对应的射频模块，同时关闭其它三个射频模块。系统在同一时间只会开启一个
射频模块，以确保没有多余的无线电信号相互干扰。
· [Bnd]选项用于启动对频过程。
· [Rng]选项可将功率降低至1/30，以方便测试遥控距离。
注意
OpenTX以及EdgeTX软件非常强大，并且具有大量的编程和混控功能。
要获取OpenTX最新详细的开源资料，请访问OpenTX官方网站：https://www.open-tx.org
要获取EdgeTX最新详细的开源资料，请访问EdgeTX官方网站：https://www.edgetx.org
电源和充电注意事项
ZORRO内置了用于3.7v锂电池的USB-C充电功能。 充电电路仅适用于2x 3.7v锂离子18350或2x 3.7v
Lipoly电池（2s 7.4v Lipo电池组），标称电池电压为3.7v，最大充电电压为4.2v。
请勿使用标称电压3.6v的LiFE电池组或18350锂离子电池充电。 错误地电池组或电池，使用此充电方式可能
会导致遥控器损坏或火灾。
请定期检查电池的电压和状况，决不要在无人看守的情况下为其充电。 请务必始终在远离可燃材料的安全区
域中充电。 如果遥控器弄湿或以任何方式损坏，请勿充电。
对于不按照安全规范使用或滥用本产品造成的一切不良后果，RadioMaster不承担任何责任。
8
技术指标
产品尺寸: 170*159*108mm
重量: 350 g
工作频率: 2.400GHz-2.480GHz
内部射频选项: CC2500 多协议 / 4-in-1 多协议/ ELRS 2.4GHz
支持的协议: 取决于内部射频模块
射频功率: CC2500 /4-in-1: 最大20dBm ， ELRS: 最大24dBm
天线: 折叠天线
工作电流: CC2500 /4-in-1: 160毫安, ELRS：400毫安
工作电压: 6.6-8.4v DC
控制距离: > 2km @ 20dBm
操作系统: 兼容OpenTX / EdgeTX
控制通道: 最多支持16 通道（取决于接收机）
显示屏: 128*64 LCD显示屏
电池: 2 x 18350 (标配不含电池)
充电 : 支持USB-C直充
摇杆: 霍尔摇杆
模块: Nano尺寸（兼容TBS Nano Crossfire /Nano Tracer / IRC Ghost）
固件升级方式: 通过USB或SD卡（不包括SD）
保修及维修
用户手册
欧盟认证合格声明
制造商
深圳RadioMaster有限公司
广东省深圳市宝安区新安街道72区杨田路德至高科技园9栋5楼
RadioMaster无线电设备ZORRO符合欧盟指令2014/53/EU。符合性认证声明的全文可在以下
网站上找到：www.radiomasterrc.com
如果您的遥控器硬件出现任何问题，请保留购买证明并与您购买ZORRO的零售商联系。
有关ZORRO OpenTX系统固件的详细用户手册，请访问Radiomaster官方网站：
https://www.radiomasterrc.com
FCC ID: 2A337ZORRO-
FCC ID: 2A337ZORRO
FCC 认证信息
警告：
安全的天线距离
T该设备已经过测试，符合FCC规则第15章的规定。操作必须符合以下两个条件：
（1）此设备不会造成有害干扰
（2）此设备必须接受收到的任何干扰，包括可能导致意外操作的干扰。
符合性声明的全文可在以下网站上找到：www.radiomasterrc.com
未经负责合规方明确批准的更改或修改可能会使用户丧失操作设备的权限。
本产品包含具有天线技术的无线电发射器，该无线电发射器已经过测试，符
合适用于2.400GHz至2.4835GHz频率范围内的无线电发射器的适用法规。
操作RadioMaster发射器时，请确保您的身体（不包括手指，手，腕，脚踝和脚）与天线之间保
持至少20cm的距离，以符合FCC法规确定的RF暴露安全要求。
WWW.RADIOMASTERRC.COM
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
Radiomaster CC2500 Zorro Radio Controller ユーザーガイド
- タイプ
- ユーザーガイド
Radiomaster CC2500 Zorro Radio Controller は、最も人気のある送信機プロトコルに対応したオープンソースかつ柔軟な送信機システムです。初心者にも上級者にも最適で、使いやすさとカスタマイズ性を両立しています。
Zorroは、エルゴノミクスデザインを採用し、手にフィットしやすく、長時間使用しても疲れにくい設計です。また、バックライト付きのLCDディスプレイと直感的な操作ボタンにより、設定や操作が簡単に行えます。
Zorroは、最大16チャンネルに対応し、様々な種類のドローンやラジコンカーを制御することができます。また、ミキシングやカーブ設定などの高度な設定にも対応しており、ユーザーの好みに合わせてカスタマイズすることができます。
Zorroは、OpenTXまたはEdgeTXを搭載しており、オープンソースのため、ユーザーはファームウェアを自由に更新したり、カスタマイズすることができます。また、Zorroには、Nanoサイズモジュールベイが搭載されており、様々な
