MW50+

Master & Dynamic MW50+ ユーザーマニュアル

  • こんにちは!Master & Dynamic MW50+ ワイヤレスヘッドホンのユーザーマニュアルについて、ご質問にお答えします。このマニュアルには、ヘッドホンの機能、使用方法、トラブルシューティングなどが記載されています。どのようなご質問でもお気軽にお尋ねください!
  • MW50+のバッテリー残量を確認するにはどうすればよいですか?
    MW50+を2台のデバイスにペアリングするにはどうすればよいですか?
    イヤーパッドを交換または取り外すにはどうすればよいですか?
USER MANUAL — MW50+ 2-IN-1
WIRELESS ON + OVER-EAR HEADPHONES
ENGLISH
FRANÇAIS
ESPAÑOL
DEUTSCHE
ITALIANO
PORTUGUÊS
DUTCH
DANISH
POLISH
2
31
54
77
100
123
146
169
192
SWEDISH
CZECH
ARABIC
ССКИЙ
日本語
한국어
繁體中文
体中文
T
HAI
215
238
261
284
307
330
353
376
399
2
USER MANUAL — MW50+ 2-IN-1
WIRELESS ON + OVER-EAR HEADPHONES
USER MANUAL – MW50+ WIRLESS ON + OVER-EAR HEADPHONES
Master & Dynamic has a deep passion for building beautifully
crafted, richly appointed, technically sophisticated audio products
for creative minds. Designed for decades of use, Master & Dynamic
products are engineered to last, utilizing only the finest materials
such as premium leathers and stainless steel, creating the perfect
balance of aesthetics, strength, comfort and sound.
Our MW50+ 2-In-1 On + Over-Ear Wireless Headphone features
interchangeable on and over-ear ear pads, allowing you to choose
your listening experience. Choose on-ear for rich, detailed and
expansive sound on-the-go. Choose over-ear for full sound isolation
for focus, productivity and relaxation.
4
EN
3
TECHNOLOGY MEETS SOPHISTICATION
Our intuitive controls afford an elegant, tactile experience.
Weight distribution, fit and comfort are paramount. Our exposted
all-aluminum antenna provides best-in-class (3X industry average)
signal range for Bluetooth
®
connectivity distance.
40mm beryllium drivers provide superior acoustics and deliver our
signature rich, warm sound. Rotating hinges fold flat for portability.
6
EN
5
A RICH, WARM SOUND
We created a rich, warm sound signature from our custom 40mm
beryllium drivers. An expansive soundscape perfectly captures the
exceptional detail that well recorded music has to offer. Our tuning
is designed to accommodate a diversity of tastes and
musical genres.
8
EN
7
DESIGNED FOR DECADES OF USE
Our headbands are constructed with premium grain cowhide on
the exterior surface and lined with soft lambskin. Each set of
ear pads are made of memory foam and wrapped in lambskin,
providing superior comfort and breathability. Areas subject to
heavy wear, such as the ear pads, are built to last and be easily
replaced as needed.
All high strain areas utilize stainless steel components. Our
innovative all-aluminum antenna enables maximum Bluetooth
®
range, while incorporating an elegant design element. All metals
are anodized or PVD coated, not painted.
10
EN
9
11
1
6
5
8
11
9
10
11
7
3
4
2
12
EN
OVERVIEW
SPECS
6
7
8
9
10
11
Aluminum Headband Connector
Premium Grain Leather Inlay
USB-C Input
Machined Aluminum Antenna
Noise Rejecting Microphone
Array
Headphone Controls (see
pages 14 – 18 for details)
Dimensions
Bluetooth
®
Profile
Weight
Impedance
190 x 155 x 34mm (On-Ear),
200 x 165 x 40mm (Over-Ear)
Bluetooth
®
4.1 with AptX
®
205g (On-Ear/239g (Over-Ear)
32 ohms
Drivers
40mm Beryllium
High-Performance Drivers
Premium Grain Leather
Headband with Lambskin
Interior
Two Sets of Interchangeable
Memory Foam Ear Pads with
Lambskin Covering
Forged Aluminum Components
3.5mm Passive Audio Input
Stainless Steel Adjustment Arm
1
2
3
4
5
Over-Ear Ear Pads (2x)
2
Over-Ear (2x)
On-Ear (2x)
14
EN
13
ADJUSTABILITY | FIT | COMFORT
Rotates for comfort
around neck.
Adjust earcup post
to find optimal fit.
M&D M&D
MFB
vol +
vol –
vol + (≥2sec)or
double press MFB
vol – (≥2sec)
15
ENFUNCTIONS (AUDIO + TELEPHONE)
vol+
vol-
Multi Function Button
(MFB)
Audio
Telephone
Factory
Reset
Play/Pause
Vol up
Vol down
Next track
Previous
track
Answer call
End call
Ignore call
Digital
assistant /
voice dial
MFB
MFB
MFB (≥2sec)
MFB (≥2sec)
Hold down vol+ and vol-
(≥4 seconds)
16
EN
PASSIVE AUDIO
Plug 3.5mm audio plug into
headphone audio input to
engage passive audio
Headphone powers off
when audio cable is
plugged in
Audio will work even if battery
is depleted
Microphone is disabled during
passive mode
17 18
ENTURN ON AND CHARGE
To turn on the MW50+ slide the switch
to the middle position.
Each time you turn on the headphone
the battery status will be displayed. To
recall battery status, slide switch to
for less than 2 seconds.
The headphone will automatically
search for previously connected
devices. A solid light indicates you
are connected. If no connection is
made after 2 minutes, the headphone
will enter deep-sleep mode. Cycle
power switch to awaken.
Low Battery
ON
Med Battery
Full Battery
Connected
Charging
Plug in the USB-C
connector and connect
to a USB port to charge.
The headphone turns off
when the USB-C is plugged
in. Avoid using the device
while it is charging
A solid orange light
indicates charging and a
solid green light indicates
a full charge when the USB
cable is connected.
Charging Full Charge
19
ENPAIRING
Hold in position for 2 seconds,
light will pulse when headphone is
in pairing mode.
Access Bluetooth
®
settings
on your source device.Locate
MW50+ and connect. A solid light
indicates you are connected.
If no connection is made after 2 minutes,
the headphone will enter deep-sleep mode.
Cycle power switch to awaken.
Pairing
Connected
20
EN
PAIRING TO 2 DEVICES
How to pair with two devices
Enter pairing mode
Connect to device 1
Enter pairing mode again
Device 1 will disconnect
Connect to device 2
Turn headphone off
Turn headphone on. Headphone
will automatically connect to
device 1 and 2 simultaneously
Pause one device and play
from the other to swap
headphone connection
1
2
3
4
5
6
7
8
M&DM&D
M&D
M&D
21
EN
ACCESSORIES
Cable 01: USB-C
Cable 02: 1.25m Straight Cable
Headphone Plug
Headphone Plug
Source Plug
Source Plug
Canvas
Headphone Case
Leather
Cable Box
Ear Pad Case
22
EN
To remove, grip leather ear
pad and gently pull away from
ear cup. Magnets will release.
CHANGING/REMOVING EAR PADS
Over-EarOn-Ear
Locator Pin
To attach, line up holes on
back of ear pads with locator
pins on ear cups. The magnets
will help pull and lock the ear
pads into place.
23 24
EN
Clean ear pads and
headphones with soft, slightly
damp cloth. Do not soak,
submerge or allow moisture
to enter near the drivers or
cable jacks. Ear pads and
cables can be purchased if
they are worn out at:
www.masterdynamic.com
Do not drop, sit on, or allow
the headphones to be exposed
to water, moisture, or
temperature extremes.
MAINTENANCE AND TROUBLESHOOTING
It is recommended that you
return your headphones to their
storage case when not in use.
To avoid damage, do not store
other items in the canvas case
along with your headphones.
CAUTION: Incorrectly rotating
or over rotating the earcups
can damage the headphones.
Temperature Range
Operate and store this product
within the temperature range
of -4°F to 113°F (-20°C to 45°C)
only. Charge the battery where
the temperature is between 41°F
and 104°F (5°C and 40°C) only.
The headphones and device
do not pair
Make sure the headphones
are not connected to the
charger. Cycle power switch
off and on.
Turn the Bluetooth
®
off, then
on again on the source device.
Turn off the Bluetooth
®
feature
on any other device that is
paired with the headphones.
Slide switch to and hold until
white light flashes.
MAINTENANCE AND TROUBLESHOOTING
Make sure “MW50+" is selected
in the Bluetooth
®
device list
No audio or poor audio
quality from a connected
Bluetooth
®
device
Move the device closer to
the headphones, physical
objects between the
headphone and the source
may obstruct the signal.
Try another music application
or try another track.
Try a different audio device.
1
2
3
4
5
Factory reset
Hold down vol+ and vol- for
≥4 seconds. Red and white
light flashes four times
25 26
ENHEARING HEALTH
Our ability to hear is amazing. Treat your ears like the precious
tools they are, and they will continue to provide you with exceptional
data, as well as a lifetime of incredible sonic experiences.
In general, do not listen “too loud or for too long,” and be attentive
to your own ears. Ringing, discomfort, or sensitivity to high
frequencies and treble may be a signal from your ears that you are
pushing them to their limits and causing damage.
As a general practice, find what seems to be your preferred
listening level and then adjust the volume down another 10% or
more. Surprisingly, your ears will attune to a slightly lower volume
over time, and what seems quiet at first can be perfect for longer
listening periods.
If you are interested in tuning your ear to have a more refined
sonic palate, there are some apps and training programs you
can find online.
27 28
ENPREVENTION OF NIHL (NOISE INDUCED HEARING LOSS)
NIHL is a preventable condition caused by both one-time and
extended exposure to excessive decibel (dB) levels. This harm to
sensitive inner ear structures is irreversible and people of all ages
can be affected. Damage can happen in a single event or gradually
over time. One-time exposure to an intense "impulse" sound, such
as an explosion, or by continued exposure to loud sounds over 85
decibels can cause harm. Indicators of NIHL include hearing loss and
tinnitus, a condition of sensing constant ringing, buzzing or roaring.
The NIDCD (National Institute on Deafness and Other Communication
Disorders) offers this simple rule of thumb: avoid sound exposure
that is “too loud, too close or too long.” Here are some general
references to sound levels that occur in everyday life: refrigerator
humming (45 dB); normal conversation (60 dB); city traffic (85 dB);
motorcycles (95 dB); an MP3 player at full volume (105 dB); sirens
(120 dB); firecrackers (150 dB).
29 30
ENWARRANTY AND CUSTOMER SERVICE
Master & Dynamic guarantees this product against defects in
materials or workmanship for a period of two years from the date
of original purchase on our website or from an authorized Master
& Dynamic retailer or reseller. As an exception to this warranty
period, batteries are guaranteed for proper functioning without
performance deterioration, for a period of one year from the date of
original purchase.
If returned within the warranty period, Master & Dynamic will at its
discretion either repair the defective product or replace it with a
repaired or refurbished product of identical specifications as the
returned product.
This limited warranty is in lieu of all other warranties, expressed
or implied, including, but not limited to, any implied warranty of
merchantability or fitness for a particular purpose.
Master & Dynamic shall have no liability of any kind for any direct,
indirect, incidental or consequential damages or expenses that arise
from the use of this product.
Master & Dynamic’s warranty does not cover normal wear and
tear, blown drivers, cut cords, bent jacks, torn headbands, loss or
theft. Parts subject to wear and tear such as ear pads and cables,
will be replaced only in case of malfunctioning due to material or
manufacturing defects, and only once during the warranty period
of your product. You will void your warranty if you disassemble your
headphones or expose them to excessive moisture.
If you believe your product is defective within the warranty period,
please contact us at [email protected]. Please include
your product’s serial number, proof of purchase, telephone number
and full return shipping address in your message to us.
Conditional to serial number, proof of purchase, and warranty
validity, you will be issued a return authorization and instructions for
return shipment.
For questions regarding your product’s warranty, visit the
SUPPORT/FAQ page at MasterDynamic.com or contact
Master & Dynamic Support at [email protected].
31
MANUEL DE L’UTILISATEUR — MW50 + 2-EN -1 CASQUE SANS
FIL SUR + AU-DESSUS DE L’OREILLE
MANUEL DE L’UTILISATEUR — MW50 CASQUE SANS FIL SUR + AU-DESSUS DE L’OREILLE
Master & dynamique est une société audio premium basée à New
York avec une grande passion pour la construction d’outils sonores
techniquement sophistiqués. Conçus pour être modernes et
pourtant éternels, nos produits utilisent uniquement les meilleurs
matériaux et sont conçus pour la durabilité, créant l’équilibre
parfait entre l’esthétique, la solidité, le confort et la qualité sonore
exceptionnelle.
Notre casque sans fil MW50 + 2-en-1 sur + au-dessus de l’oreille-
est doté de coussinets d’oreilles sur et au dessus de l’oreille
interchangeables, vous permettant de choisir votre expérience
d’écoute. Choisissez sur oreille pour un son riche, détaillé et
expansif lorsque vous vous déplacez. Optez pour une isolation
phonique complète pour la concentration, la productivité et la
relaxation.
33
FR
32
34
1
6
5
8
11
9
10
11
7
3
4
2
35
FR
APERÇU
CARACTÉRISTIQUES
6
7
8
9
10
11
Connecteur aluminium du bandeau
Incrustation en cuir de première
qualité
Entrée USB-C
Antenne en aluminium usinée
Réseau de microphone repousse
bruit
Commandes casque (voir pages 14
– 18 pour plus de détails)
Dimensions
Profil
®
Bluetooth
Poids
Impédance
190 x 155 x 34mm (on-Ear),
200 x 165 x 40mm (Over -Ear)
Bluetooth
®
4,1 avec APTX®
205g (on-Ear/239g (Over-ear)
32 ohms
Pilotes
40mm béryllium
Pilotes haute performance
Bandeau en cuir de haute qualité en
peau d’agneau Intérieure
Des ensembles en mousse mémoire
interchangeable avec une couverture
en peau d’agneau
Composants d’aluminium forgé
Entrée audio passive 3.5mm
Bras de réglage en acier inoxydable
1
2
3
4
5
2
Over-Ear (au-
dessus oreille) (2x)
On-Ear
(sur oreille)(2x)
36 37
EN
36
RÉGLAGE | AJUSTEMENT | CONFORT
Tourne pour le confort
autour du cou.
Réglez l’écouteur
pour trouver l’ajustement optimal.
FR
/