Topdon JumpSurge3000 ユーザーマニュアル

Jump Starter USER MANUAL

JUMPSURGE

3000

CONTENT

Welcome

DE

17

18

19

21

22

25

26

EN

5

6

7

9

10

13

14

FR

29

30

31

33

34

37

38

ES

41

42

43

45

46

49

50

IT

53

54

55

57

58

61

62

65

66

67

69

70

73

74

PT

77

78

79

81

82

85

86

RU

91

92

93

95

96

99

100

JP

About

Safety cautions

FAQ

Warranty

What is

included

Product

overview

Recharge the

jump starter

How to jump

start vehicles

(12v only)

Specications

ENGLISH

WELCOME

ABOUT

SAFETY CAUTIONS

Thank you for purchasing the JUMPSURGE3000. If any

issues arise during the use of this product, please contact

[email protected] for ofcial technical support.

The JUMPSURGE3000 is a portable jump starter that

delivers 3,000 peak amps for jump starting a 12V lead-acid

battery in seconds. It supports quick and safe starts for

12V cars, boats, motorcycles, ATVs, lawnmowers, caravans,

tractors, trucks, etc., with up to 9.0-liter gasoline or 7.0-liter

diesel engines. It is able to jump start the batteries 45 times

on a single charge.

It also functions as a power bank to quickly charge

electronic devices like phones and tablets, or supply power

to DC devices.

Please read this manual carefully before using the tool and

keep it for future reference.

1. ONLY use the battery clamps that come with this product.

the battery manufacturer.

2. DO NOT use this product if the cable or the jump starter

has any damage.

3. This product can only be used for starting vehicles with

12-volt lead-acid batteries.

4. Only jump-start vehicles when the battery level of the

jump starter is above 50%.

5. If the engine does not start successfully on the rst try,

disconnect the clamps from the vehicle battery and wait

at least 20 seconds before reconnecting. DO NOT attempt

more than 3 consecutive jump-starts within 2 minutes.

6. DO NOT put the product under direct sunlight or in high-

temperature areas.

7. DO NOT disassemble the product by yourself.

EN | 5

8. DO NOT place the product in high-temperature

environments for a long time. The JUMPSURGE3000's

working temperature is of -10℃~40℃ (14 ℉~104 ℉).

9. Check the battery level of this product every two months

and charge it regularly.

10. The JUMPSURGE3000 contains a Lithium-Ion Battery.

Please dispose of it under local regulations at the end of its

life.

WHAT'S INCLUDED

JUMPSURGE 3000

Battery Clamps

USB Cable

Adapter

EVA Carrying Bag

User Manual

PRODUCT OVERVIEW

EN | 7

LED

Light

Hook Stand

Socket For

Battery Clamps

DC Out (Max

16.8V/10A)

USB Out

(5V/2A) Type-C In (5V/3A, 9V/3A, 12V/3A, 15V/3A)

Type-C Out (5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.25A)

Battery Level

Indicator

Power Button

Status Indicator

BOOST Button

USB Out (5V/3A,

9V/2A, 12V/1.5A)

Handle

A Guide To The Status Indicator:

If The Light is Solid Green:

The voltage of the vehicle battery is normal. You can jump-

start the vehicle with the JUMPSURGE 3000.

If The Light Doesn't Turn On:

The voltage of the vehicle battery is too low to be detected.

Press and hold the BOOST Button for around 3

seconds until it lights up. Then, the jump starter will enter

a forced output mode. Start your vehicle within the next 30

seconds.

Note: The forced output mode disables all safety protections

temporarily. Therefore, only use this mode when the vehicle

battery is extremely low.

Positive Clamp (Red) Negative Clamp (Black)

RECHARGE THE JUMP

STARTER

A Guide To The LED Light:

The JUMPSURGE3000 comes partially charged and needs

to be fully charged before use. Please charge your jump

starter through the Type-C In port once you receive it.

Note:

Only jump-start vehicles when the battery level of the jump

starter is above 50%.

Press the Power Button once to turn on the jump-

starter.

Press and Hold the Power Button for 3 Seconds to

turn on the LED Light. Then Press the Power Button once to

toggle between Flashlight, Strobe, SOS, and POWER OFF.

EN | 9

Step 2:

Connect the other end of the battery clamps to the vehicle

battery. Red clamp to positive polarity(+), black clamp to

negative polarity(-).

Step 3:

Press the Power Button once to power on the jump

starter. The Battery Level Indicator

will light up, which means the tool is ready to jump-start a

vehicle. The Status Indicator will turn green which

HOW TO JUMP START

VEHICLES(12V ONLY)

Important:

Before attempting to jump-start a vehicle, make sure

you have turned off all of the power loads of the vehicle,

including headlights, radio, air conditioning, etc.

Step 1:

Plug the blue end of the battery clamps into the socket on

the jump starter.

(Red) (Black)

Notes:

* If the Status Indicator doesn't turn on, press and

hold the BOOST Button to enable the forced output

mode.

* The jump starter has a built-in buzzer that will ring when

a reverse polarity, over-temperature, over-circuit, and other

improper connections are detected. Disconnect the jump

starter if the buzzer rings and connect again after the issue

is resolved.

Step 4:

Try starting the vehicle. If it fails, disconnect the clamps

from the vehicle's battery and wait for 20 seconds, then

reconnect and try again. Do not attempt more than 3

consecutive jump-starts within 2 minutes.

EN | 11

means the vehicle battery voltage is normal and ready for

jump-starting.

This jump starter is able to be used as a power bank.

Press the Power Button once to turn on the

JUMPSURGE3000. Then you can quickly charge your phone

or tablet through the USB Out port, and quickly charge

your laptop through the Type-C Out port. You can also use

it to supply DC power (Max 16.8V/10A) to other automotive

devices, such as tire inator or car fridge, through the DC

Out port.

Step 5:

After successfully cranking the vehicle, the jump starter

will automatically power off in 10 seconds without any

operation. Remove the clamps from batteries and separate

the clamps and jump starter.

(Red) (Black)

Other Functions

SPECIFICATIONS

FAQ

Model

Battery Capacity

USB1 Output

USB2 Output

DC Output

Type-C Output

Type-C Input

Peak Current

Operating Temperature

Storage Temperature

JUMPSURGE3000

24,000mAh, 3.7V/88.8Wh

5V 3A, 9V 2A, 12V 1.5A

5V 2A

Max 16.8V 10A

5V 3A, 9V 3A, 12V 3A,

15V 3A, 20V 2.25A

5V 3A, 9V 3A, 12V 3A,

15V 3A

3000A

-10℃~40℃ (14 ℉~104 ℉)

-20℃~75℃ (-4 ℉~167 ℉)

Q1: How many times can the JUMPSURGE3000 jump start

a car with a full charge?

Up to 45 times. It depends on the vehicle engine's power

and the vehicle battery's power.

Q2: How long does it take to fully charge the JUMPSURGE3000?

It varies depending on the adapter. The adapter that comes

with the JUMPSURGE3000 is a 5V/3A, and its charging time

is of approximately 6 hours.

Q3: How to turn off the JUMPSURGE3000?

The device will automatically power off after 10 seconds

without operation.

EN | 13

WARRANTY

FCC WARNINGS

TOPDON One Year Limited Warranty

TOPDON warrants to its original purchaser that the

company's products will be free from defects in material

and workmanship for 12 months from the date of purchase

(Warranty Period). TOPDON will repair or replace the

defective part or product for the defects reported during

the Warranty Period according to its technical support

analysis and conrmation.

TOPDON shall not be liable for any incidental or

consequential damages arising from the device's use,

misuse, or mounting. Some states do not allow limitations

on how long an implied warranty lasts, so the above

limitations may not apply to you.

This limited warranty is void under the following

conditions:

-Product misused, disassembled, altered, or repaired by

unauthorized stores or technicians.

-Careless handling and violation of the device's operation.

Notice: All information in this manual is based on the latest

information available at the time of publication, and no

warranty can be made for its accuracy or completeness.

TOPDON reserves the right to make changes at any time

without notice.

This device complies with Part 15 of the FCC Rules. Its

operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses,

and can radiate radio frequency energy. If not installed

and used in accordance with the instructions, it may

cause harmful interference to radio communications.

There is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user

is encouraged to try to correct the issue by one or more of

the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and

receiver.

-Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

-Contact an experienced radio/TV technician for help.

EN | 15

DEUTSCH

DE | 17

WILLKOMMEN

Über

SICHERHEITSHINWEISE

Vielen Dank, dass Sie sich für JUMPSURGE3000 entschieden

haben. Falls während der Inbetriebnahme dieses Produkts

Probleme auftreten, wenden Sie sich bitte an support@

topdon.com, um ofziellen technischen Support zu

erhalten.

JUMPSURGE3000 dient als tragbare Starthilfe, der 3000

Spritzenstrom liefert, um eine 12-V-Bleisäurebatterie in

Sekundenschnelle zu starten. Es unterstützt schnelle und

sichere Starts für 12-V-Autos, Boote, Motorräder, ATVs,

Rasenmäher, Wohnwagen, Traktoren, Lastwagen usw.

Außerdem liefert er für bis zu 9.0-Liter-Benzin- oder

7,0-Liter-Dieselmotoren 45-facher Boost-Fähigkeit mit einer

einzigen Ladung.

Es kann auch als Powerbank benutzt werden, um

elektronische Geräte wie Handys und Tablets schnell

aufzuladen oder Gleichstromgeräte mit Strom zu versorgen.

Bitte lesen Sie bitte diese Bedienungsanleitung sorgfältig

durch und bewahren Sie diese zum späteren Nachlesen auf.

1. Verwenden Sie NUR die mit diesem Produkt gelieferten

Batterieklemmen.

2. Verwenden Sie das Produkt nicht, wenn das Netzkabel

oder der Starthilfe beschädigt ist.

3. Dieses Produkt kann nur zum Anlassen von Fahrzeugen

mit 12-Volt-Blei-Säure-Batterien verwendet werden.

4. Nur Autos mit Starthilfe starten, wenn der Batteriestand

der Starthilfe mehr als 50 % beträgt.

5. Falls das im ersten Anlauf nicht klappt, trennen Sie

die Klemmen von der Autobatterie und warten Sie

mindestens 20 Sekunden, bevor Sie sie wieder anschließen.

Versuchen Sie NICHT mehr als 3 aufeinanderfolgende

Starthilfeversuche innerhalb von 2 Minuten.

6. Lassen Sie das Produkt nicht in einer extrem

heißen Umgebung stehen (einschließlich direkter

Sonnenbestrahlung).

7. Zerlegen Sie keinesfalls das Produkt selbst!

8. Stellen Sie das Produkt NICHT für längere Zeit in eine

extreme Umgebung. Die Betriebstemperatur beträgt

-10℃~40℃(14 ℉~104 ℉).

9. Überprüfen Sie den Batteriestand dieses Produkts alle

zwei Monate und laden Sie es regelmäßig auf

10. Ein Lithium-Ionen-Akku ist im Produkt integriert.

Entsorgen Sie das Produkt am Ende seiner Lebensdauer

gemäß den geltenden gesetzlichen Vorschriften.

PAKETUMFANG

JUMPSURGE 3000

Batterieklemmen

USB Kabel

Adapter

EVA Tasche

Bedienungsanleitung

DE | 19

PRODUKTÜBERSICHT

LED-

Leuchte

Haken Halter

Batterieklemmen-

Buchse

DC Ausgang

(Max 16,8V/10A)

USB Ausgang

(5V/2A) Typ-C Eingang (5V/3A, 9V/3A, 12V/3A, 15V/3A)

Typ-C Ausgang (5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2,25A)

Batteriestandsanzeige

Power-Taste

Statusanzeige Boostknopf

USB Ausgang (5V/3A,

9V/2A, 12V/1,5A)

Griff

Beschreibung der Statusanzeige:

Wenn das Licht dauernd grün leuchtet:

Die Spannung von Fahrzeugbatterie ist normal. Sie können

dem Fahrzeug mit dem JUMPSURGE 3000 Starthilfe

geben.

Wenn das Licht nicht leuchtet:

Die Spannung von Fahrzeugbatterie ist zu niedrig,

um erkannt zu werden. Halten Sie die BOOST-Taste

etwa 3 Sekunden lang gedrückt, bis das Anzeigeslicht

leuchtet. Dann geht die Starthilfe in einen erzwungenen

Ausgangsmodus. Sie müssen das Auto innerhalb von 30

Sekunden starten.

Hinweis: Der erzwungene Ausgangsmodus macht alle

Sicherheitsschutzfunktionen ungültig. Deswegen benutzen

Sie diesen Modus nur, wenn die Fahrzeugbatterie zu niedrig

ist.

Positivklemme (Rot) Negaitvklemme (Schwarz)

ページを読み込んでいます...

Topdon JumpSurge3000, JS3000 ユーザーマニュアル

関連論文

その他の書類