Pioneer DDJ-SX2 クイックスタートガイド

カテゴリー
DJコントローラー
タイプ
クイックスタートガイド
DJ Controller
Controlador DJ
DDJ-SX2
The Pioneer DJ support site shown above offers FAQs, information on software and various other types of
information and services to allow you to use your product in greater comfort.
For the latest version of the Serato DJ software, access Serato.com and download the software from there.
Operating Instructions (Quick Start Guide)
Manual de instrucciones (Guía de inicio rápido)
El sitio de asistencia Pioneer DJ mostrado arriba ofrece las preguntas frecuentes, información del software y
varios otros tipos de información y servicios que le permitirán usar su producto con mayor confort.
Para la versión más reciente del software Serato DJ, acceda a Serato.com y descargue el software desde allí.
http://pioneerdj.com/support/
http://serato.com/
English Español
En
2
CAUTION
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
D3-4-2-1-1_B1_En
WARNING
This equipment is not waterproof
. To prevent a fire or
shock hazard, do not place any container filled with
liquid near this equipment (such as a vase or flower
pot) or expose it to dripping, splashing, rain or
moisture
.
D3-4-2-1-3_A1_En
WARNING
To
prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.
D3-4-2-1-7a_A1_En
Operating Envir
onment
Operating environment temperature and humidit
y:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light).
D3-4-2-1-7c*_A2_En
CAUTION
The STANDBY/ON switch on this unit will not
completely shut off all power from the AC outlet.
Since the power cord serves as the main disconnect
device for the unit, you will need to unplug it from the
AC outlet to shut down all power. Therefore, make
sure the unit has been installed so that the power
cord can be easily unplugged from the AC outlet in
case of an accident. To avoid fire hazard, the power
cord should also be unplugged from the AC outlet
when left unused for a long period of time (for
example, when on vacation).
D3-4-2-2-2a*_A1_En
When using this product, confirm the safety
information shown on the bottom of the unit.
D3-4-2-2-4_B1_En
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
D8-10-1-2_A1_En
Information to User
Alterations or modifications carried out without
appropriate authorization may invalidate the user’s
right to operate the equipment.
D8-10-2_A1_En
FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Product Name: DJ Controller
Model Number: DDJ-SX2
Responsible Party Name: PIONEER ELECTRONICS (USA) INC.
SERVICE SUPPORT DIVISION
Address: 1925 E. DOMINGUEZ ST. LONG BEACH, CA 90810-1003, U.S.A.
Phone: 1-800-421-1404
URL: http://www.pioneerelectronics.com
D8-10-4*_C1_En
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which requires
repair will be charged for even during the warranty
period. K041_A1_En
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement.
S002*_A1_En
En
3
English
Before start
How to read this manual
! Thank you for buying this Pioneer product.
Be sure to read both this leaflet and the operating instructions! Both
documents include important information that you must understand
before using this product.
After you have finished reading the instructions, put them away in a
safe place for future reference.
For instructions on acquiring the operating instructions, see
Acquiring the manual (p. 3 ).
! In this manual, names of screens and menus displayed on the prod-
uct and on the computer screen, as well as names of buttons and
terminals, etc., are indicated within brackets. (e.g.: [CUE] button,
[Files] panel, [MIC1] terminal)
! Please note that the screens and specifications of the software
described in this manual as well as the external appearance and
specifications of the hardware are currently under development and
may differ from the final specifications.
! Please note that depending on the operating system version, web
browser settings, etc., operation may differ from the procedures
described in this manual.
What’s in the box
! AC adapter
! Power plug
! USB cable
! Warranty (for some regions)
1
! Operating Instructions (Quick Start Guide) (This document)
! Serato DJ EXPANSION PACK VOUCHER
2
1 For the Japanese region, the corresponding information is provided
on the back cover of the “Operating Instructions (Quick Start Guide)”.
2 Note that the Serato DJ EXPANSION PACK VOUCHER cannot be
reissued. You will need to use the voucher code to activate the expan-
sion pack. Make sure to store it in a safe place so that you do not lose
it.
Acquiring the manual
Various instructions are sometimes provided as files in PDF format.
Adobe
®
Reader
®
must be installed in order to view PDF format files.
Acquiring this unit’s Operating
Instructions
1 Launch a web browser on the computer and access
the Pioneer DJ support site below.
http://pioneerdj.com/support/
2 On the Pioneer DJ support site, click [Manuals] under
[DDJ-SX2].
3 Click on the required language on the download
page.
Downloading of the operating instructions begins.
Downloading the Serato DJ software
manual
1 Launch a web browser on the computer and access
the Pioneer DJ support site below.
http://pioneerdj.com/support/
2 Click [Software Info] under [DDJ-SX2] on the Pioneer
DJ support site.
3 Click the Serato DJ icon and then click the link to the
Serato DJ download page.
The Serato DJ download page is displayed.
4 Log in to your “Serato.com” user account.
Input the e-mail address and password you have registered to log in to
“Serato.com”.
5 From “More Downloads” on the right side of the
download page, click the relevant manual.
Downloading of the Serato DJ software manual starts.
Installing the software
Before installing the software
The Serato DJ software and driver software are not included.
Access and download the software from the Pioneer DJ support site.
http://pioneerdj.com/support/
! The user is responsible for preparing the computer, network
devices and other elements of the Internet usage environment
required for a connection to the Internet.
About the driver software (Windows)
This driver software is an exclusive ASIO driver for outputting audio
signals from the computer.
! There is no need to install the driver software when using Mac OS X.
Obtaining the driver software
1 Launch a web browser on the computer and access
the Pioneer DJ support site below.
http://pioneerdj.com/support/
2 Click [Software Download] under [DDJ-SX2] on the
Pioneer DJ support site.
3 Click the icon of the driver software to download the
driver software from the download page.
About the Serato DJ software
Serato DJ is a DJ software application by Serato. DJ performances are
possible by connecting the computer on which this software is installed
to this unit.
Minimum operating environment
Supported operating systems CPU and required memory
Mac OS X: 10.9, 10.8
and 10.7
32-bit
version
Intel
®
processor, Core i3, i5 and i7
1.07 GHz or better, Intel
®
processor,
Core 2 Duo 2.0 GHz or better
2 GB or more of RAM
64-bit
version
Intel
®
processor, Core i3, i5 and i7
1.07 GHz or better, Intel
®
processor,
Core 2 Duo 2.4 GHz or better
4 GB or more of RAM
En
4
Supported operating systems CPU and required memory
Windows: Windows 8.1
and Windows 7
32-bit
version
Intel
®
processor, Core i3, i5 and i7
1.07 GHz or better, Intel
®
processor,
Core 2 Duo 2.0 GHz or better
2 GB or more of RAM
64-bit
version
Intel
®
processor, Core i3, i5 and i7
1.07 GHz or better, Intel
®
processor,
Core 2 Duo 2.4 GHz or better
4 GB or more of RAM
Others
USB port
A USB 2.0 port is required to connect the computer
with this unit.
Display resolution Resolution of 1 280 x 720 or greater
Internet connection
An Internet connection is required for registering
the “Serato.com” user account and downloading the
software.
! For information on the latest system requirements, compatibility, and supported
operating systems, see “Software Info” of “DDJ-SX2” on the Pioneer DJ sup-
port site below.
http://pioneerdj.com/support/
! Operation is not guaranteed on all computers, even if all the required operating
environment conditions indicated here are fulfilled.
! Depending on the computer’s power-saving settings, etc., the CPU and hard
disk may not provide sufficient processing capabilities. For notebook comput-
ers in particular, make sure the computer is in the proper conditions to provide
constant high performance (for example by keeping the AC power connected)
when using Serato DJ.
! Use of the Internet requires a separate contract with a provider offering Internet
services and payment of provider fees.
! Operating System support assumes you are using the latest point release for
that version.
Obtaining the Serato DJ software
1 Launch a web browser on the computer and access
the Pioneer DJ support site below.
http://pioneerdj.com/support/
2 Click [Software Download] under [DDJ-SX2] on the
Pioneer DJ support site.
3 Click the Serato DJ icon and then click the link to the
Serato DJ download page.
The Serato DJ download page is displayed.
4 Log in to your “Serato.com” user account.
! If you have already registered a user account on “Serato.com”,
proceed to step 6.
! If you have not completed registering your user account, do so
following the procedure below.
Following the instructions on the screen, input your e-mail
address and the password you want to set, then select the
region in which you live.
If you check [E-mail me Serato newsletters], newsletters
providing the latest information on Serato products will be
sent from Serato.
Once user account registration is completed, you will receive
an e-mail at the e-mail address you have input. Check the
contents of the e-mail sent from “Serato.com”.
! Be careful not to forget the e-mail address and password speci-
fied when you performed user registration. They will be required
for updating the software.
! The personal information input when registering a new user
account may be collected, processed and used based on the
privacy policy on the Serato website.
5 Click the link in the e-mail message sent from “Serato.
com”.
This takes you to the Serato DJ download page. Proceed to step 7.
6 Log in.
Input the e-mail address and password you have registered to log in to
“Serato.com”.
7 Download the Serato DJ software from the download
page.
About the installation procedure
The installation procedure depends on the operating system (OS) on the
computer you are using.
For Windows
After installing the driver software, install the Serato DJ software.
For Mac OS X
Only install the Serato DJ software.
Installation Procedure (Windows)
Do not connect this unit and the computer until installation is
completed.
! Log on as the user which was set as the computer’s administrator
before installing.
! If any other programs are running on the computer, quit them.
1 Double-click the downloaded driver software
(Pioneer_DDJ_SX2_Driver_x.xxx.exe).
2 Proceed with installation according to the instructions
on the screen.
If [Windows Security] appears on the screen while the installation is
in progress, click [Install this driver software anyway] and continue
with the installation.
When the installation program is completed, a completion message
appears.
After installing the driver software, install the Serato DJ software.
3 Unzip the downloaded Serato DJ software file.
4 Double-click the unzipped software file to launch the
installer.
5 Read the terms of the license agreement carefully,
and if you agree, select [I agree to the license terms and
conditions], then click [Install].
! If you do not agree to the contents of the license agreement, click
[Close] to cancel installation.
Installation begins.
The message of successful installation appears once installation is
completed.
En
5
English
6 Click [Close] to quit the Serato DJ installer.
Installation procedure (Mac OS X)
Do not connect this unit and the computer until installation is
completed.
! If any other programs are running on the computer, quit them.
1 Unzip the downloaded Serato DJ software file.
2 Double-click the unzipped software file to launch the
installer.
3 Read the terms of the license agreement carefully,
and if you agree, click [Agree].
! If you do not agree to the contents of the usage agreement, click
[Disagree] to cancel installation.
4 If the following screen appears, drag and drop the
[Serato DJ] icon on the [Applications] folder icon.
En
6
Part names and functions
For further details on each unit, refer to the Operating Instructions and
the Serato DJ software manual.
! For instructions on obtaining the Operating Instructions and the
Serato DJ software manual, see Acquiring the manual on page 3 .
CUE LOOP SAVED LOOP SLICER LOOP
VELOCITY SAMPLER
SLOT
SAVE
START
FLIP
REC
LOOP ON/OFF
4 BEAT
CUE LOOP SAVED LOOP SLICER LOOP
VELOCITY SAMPLER
4 BEAT
SLOT
SAVE
START
FLIP
REC
LOOP ON/OFF
INST.DOUBLES INST.DOUBLES INST.DOUBLESINST.DOUBLES
SYNC OFF SYNC OFF
1 Browser section
2 Deck section
3 Mixer section
4 Effect section
Browser section
INST. DOUBLES INST. DOUBLES INST. DOUBLESINST. DOUBLES
1 1 2 1 1
3 4
1 LOAD button
The selected tracks are loaded to the respective decks.
[SHIFT] + press:
The library’s track list is sorted when one of the [LOAD] buttons is
pressed.
2 Rotary selector
Turn:
The cursor moves vertically.
Press:
The next level is displayed.
3 BACK button
The cursor moves to the previous level.
[SHIFT] + press:
Switches the Serato DJ layout.
4 LOAD PREPARE button
Loads tracks to the [Prepare] panel.
[SHIFT] + press:
The panel display switches each time the button is pressed.
Deck section
CUE LOOP SAVED LOOP SLICER LOOP
VELOCITY SAMPLER
SLOT
SAVE
START
FLIP
REC
LOOP ON/OFF
4 BEAT
SYNC OFF
t
1 Jog dial
Turn top:
When the vinyl mode is on, the scratch operation is possible.
Turn outer section:
The pitch bend operation (adjustment of the playing speed) is possible.
[SHIFT] + Turn top:
The playback position skips in sync with the beat. (Skip mode)
2 NEEDLE SEARCH pad
By touching the pad, you can jump to the desired position in the
track loaded in the deck.
3 TEMPO slider
Use this to adjust the track playing speed.
4 KEY LOCK button
Turns the key lock function on and off.
[SHIFT] + press:
The [TEMPO] slider’s range of variation switches each time the but-
ton is pressed.
Press for over 1 second:
Sets the tempo (BPM) of the currently playing track back to its original tempo.
5 Takeover indicator
6 AUTO LOOP button
Turns the auto looping mode on and off.
[SHIFT] + press:
Switches looping between active and non-active. (Loop Active)
7 LOOP 1/2X button
Halves the loop playback length.
[SHIFT] + press:
During loop playback, moves the loop to the left by the amount equal
to its length. (Loop Shift)
En
7
English
8 LOOP 2X button
Doubles the loop playback length.
[SHIFT] + press:
During loop playback, moves the loop to the right by the amount
equal to its length. (Loop Shift)
9 LOOP IN button
Loop In Point is set.
[SHIFT] + press:
The loop slot switches.
Press for over 1 second:
Turns the auto 4-beat loop on.
a LOOP OUT button
The loop out point is set, and loop playback begins.
[SHIFT] + press:
Cancels loop playback. (Loop Exit)
After loop playback is canceled, playback returns to the previously
set loop in point and loop playback resumes. (Reloop)
b FLIP MODE SLOT button
c FLIP MODE REC button
d FLIP MODE START button
Allows you to record or call sequences such as HOT CUE operation.
This function (Serato Flip) needs to be activated before it can be
used.
For details, visit the Pioneer DJ support site below.
http://pioneerdj.com/support/
e HOT CUE mode button
Sets the hot cue mode.
[SHIFT] + press:
Sets the cue loop mode.
Press for over 1 second:
Turns the quantize on/off.
f ROLL mode button
Sets the roll mode.
[SHIFT] + press:
Sets the saved loop mode.
g SLICER mode button
Sets the slicer mode.
[SHIFT] + press:
Sets the slicer loop mode.
h SAMPLER mode button
Sets the sampler mode.
[SHIFT] + press:
Sets the velocity sampler mode.
i Performance pads
Control the hot cue, loop roll, slicer, sampler and other functions.
j PARAMETERc button, PARAMETERd button
Sets a parameter for the loop roll, slicer, sampler and other
functions.
k PLAY/PAUSE f button
Use this to play/pause tracks.
[SHIFT] + press:
The track returns to the temporary cue point and playback continues
from there. (Stutter)
l CUE button
This is used to set, play and call out temporary cue points.
[SHIFT] + press:
Loads the previous track in the track list. (Previous Track)
m SYNC button
The tempos (pitches) and beat grids of tracks on multiple decks can
be synchronized automatically.
[SHIFT] + press:
Cancels the sync mode.
n SHIFT button
When another button is pressed while pressing the [SHIFT] button, a
different function is called out.
! For details on operation using the [SHIFT] button, see the
Operating Instructions.
o DECK button
Switches the deck to be operated.
Pressing the [DECK3] button while holding down the [DECK1] but-
ton or pressing the [DECK1] button while holding down the [DECK3]
button:
Turns on DUAL DECK mode on the left deck.
Pressing the [DECK4] button while holding down the [DECK2] but-
ton or pressing the [DECK2] button while holding down the [DECK4]
button:
Turns on DUAL DECK mode on the right deck.
p GRID ADJUST button
When the jog dial is turned while pressing the [GRID ADJUST] but-
ton, the beat grid interval can be adjusted.
[SHIFT] + press:
Sets a beat marker. (Grid Set)
q GRID SLIDE button
When the jog dial is turned while pressing the [GRID SLIDE] button,
the overall beat grid can be slid to the left or right.
[SHIFT] + press:
Clears the beat markers. (Grid Clear)
r SLIP button
Turns the slip mode on and off.
[SHIFT] + press:
This switches the vinyl mode on/off.
s CENSOR button
The track is played in the reverse direction while the [CENSOR] but-
ton is pressed, and normal playback resumes when the button is
released.
[SHIFT] + press:
The track is played in the reverse direction. When the [SHIFT] and
[CENSOR] buttons are pressed again, reverse playback is canceled
and normal playback resumes.
t PANEL SELECT button
The panel display switches in the order below each time the button
is pressed.
Panel display off l [REC] panel l [FX] panel l [SP-6] panel l
Panel display off ...
[SHIFT] + press:
The panel display switches in the order below each time the button
is pressed.
Panel display off l [SP-6] panel l [FX] panel l [REC] panel l
Panel display off ...
En
8
Mixer section
INST. DOUBLES INST. DOUBLES INST. DOUBLESINST. DOUBLES
c
d
4 4
e
g
f
h
b
1 2 1 2 1 2 1 2
5
3
9
7
4
6
a
5 5
5
3
9
4
6
a
8
7
8
1 FX 1 assign button
Turns the effect unit FX1 on/off.
2 FX 2 assign button
Turns the effect unit FX2 on/off.
3 TRIM control
Adjusts the output size.
4 EQ (HI, MID, LOW) controls
Boosts or cuts frequencies.
5 Channel Level Indicator
Displays the sound level of the respective channels before passing
through the channel faders.
6 FILTER control
Applies the filter effect.
7 Headphones CUE/MIC TALK OVER button
The sound of channels for which the headphones [CUE] button is
pressed is output to the headphones.
When the [INPUT SELECT] switch for Channel 3 or Channel 4 is set
to [MIC1] or [MIC2], the talk over function can be turned on/off using
the switch.
[SHIFT] + press:
The track’s tempo can be set by tapping the button. (Tap function)
8 Headphones CUE button
The sound of channels for which the headphones [CUE] button is
pressed is output to the headphones.
[SHIFT] + press:
The track’s tempo can be set by tapping the button. (Tap function)
9 Channel fader
Move:
Adjusts the level of audio signals output in each channel.
[SHIFT] + move:
Use the channel fader start function.
a Crossfader Assign Switch
Assigns the channel output to the crossfader.
b Crossfader
Outputs the sound assigned with the crossfader assign switch.
[SHIFT] + move:
Uses the crossfader start function.
c MASTER LEVEL control
Adjusts the master sound level output.
d Master level indicator
Displays the master output’s audio level.
e Booth monitor level control
Adjusts the level of audio signals output from the [BOOTH OUT]
terminal.
f HEADPHONES MIX control
Adjusts the balance of the monitor volume between the sound of the
channels for which the headphones [CUE] button is pressed and the
sound of the master channel.
g MASTER CUE button
Turns monitoring of the master output’s sound on and off.
h SAMPLER VOLUME fader
Adjusts the sampler’s overall sound level.
Effect section
1 1 1 2
3 3 3 4
1 Effect parameter controls
These adjust the effects’ parameters.
2 FX BEATS control
Adjusts the effect time.
3 Effect parameter buttons
Turns the effect on and off or switches the parameter.
[SHIFT] + press:
Switches the effect type.
4 TAP button
The BPM used as the base value for the effect is calculated by the
interval at which the button is tapped with a finger.
When the button is pressed and held, the effect time is reset.
[SHIFT] + press:
Switches the effect mode.
En
9
English
Rear panel
4 5 62
1
3 7 6 5 8 a b c d9
1 MASTER OUT 1 terminals
Connect powered speakers, etc., here.
2 MASTER OUT 2 terminals
Connect to a power amplifier, etc.
3 BOOTH OUT terminals
Output terminals for a booth monitor, compatible with balanced or
unbalanced output for a TRS connector.
4 MIC2 terminal
Connects a microphone here.
5 CD terminals
Connect to a DJ player or other line level device.
6 PHONO/LINE input terminals
Connect a phono level output device (analog player (for MM car-
tridges), etc.) or a line level output device (DJ player, etc.) here.
Switch the terminals’ function according to the connected device
using the [INPUT SELECT] switch on this unit’s front panel.
7 SIGNAL GND terminal
Connects an analog player’s ground wire here. This helps reduce
noise when the analog player is connected.
8 MIC1 terminal
Connects a microphone here.
9 Kensington security slot
a
USB terminal
Connect to a computer.
b STANDBY/ON switch
This switches this unit’s power between on and standby.
c DC IN terminal
Connect to a power outlet using the included AC adapter (with the
power plug mounted).
d Cord hook
Catch the AC adapter’s power cord and USB cable on this hook
when using this unit.
Front panel
12 53 4 34
1 PHONES jacks
Connect headphones here.
Both stereo phone plugs (Ø 6.3 mm) and stereo mini phone plugs
(Ø 3.5 mm) can be used.
2 HEADPHONES LEVEL control
Adjusts the audio level output from the [PHONES] jack.
3 INPUT SELECT switch
Selects the input source of each channel from the components con-
nected to this unit.
[PC]: Select this to use the track loaded in the Serato DJ soft-
ware’s deck.
[MIC1] or [MIC2]: Select one of these to use the microphone con-
nected to the [MIC1] or [MIC2] terminal.
[CD]: Select this to use a line level output device (DJ player, etc.)
connected to the [CD] terminals.
4 INPUT SELECT switch
Selects the input source of each channel from the components con-
nected to this unit.
[PC]: Select this to use the track loaded in the Serato DJ soft-
ware’s deck.
[PHONO]: Select this to use a phono level (for MM cartridges)
output device (analog player, etc.) connected to the [PHONO/
LINE] input terminals.
[LINE]: Select this to use a line level output device (DJ player,
etc.) connected to the [PHONO/LINE] input terminals.
5 CROSS FADER CURVE selector switch
This switches the crossfader curve characteristics.
En
10
Operation
! Wait until all connections between devices have been completed
before connecting the AC adapter.
Be sure to turn off the power and unplug the AC adapter from the
power outlet before making or changing connections between
devices.
Refer to the operating instructions for the component to be
connected.
! Only use the AC adapter included with this unit.
! Power is supplied to this unit by the AC adapter.
! Connect this unit and the computer directly using the included USB
cable.
! A USB hub cannot be used.
Connections
1 Connect headphones to one of the [PHONES]
terminals.
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
SLOT
SAVE
START
FLIP
REC
LOOP ON/OFF
4 BEAT
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
4 BEAT
SLOT
SAVE
START
FLIP
REC
LOOP ON/OFF
INST.DOUBLES INST.DOUBLES I NST.DOUBLESINST.DOUBLES
SYNC OFF SYNC OFF
2 Connect powered speakers, a power amplifier,
components, etc., to the [MASTER OUT 1] or [MASTER
OUT 2] terminals.
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
SLOT
SAVE
START
FLIP
REC
LOOP ON/OFF
4 BEAT
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
4 BEAT
SLOT
SAVE
START
FLIP
REC
LOOP ON/OFF
INST.DOUBLES INST.DOUBLES INST. DOUBLESINST.DOUBLES
SYNC OFF SYNC OFF
Powered speakers, etc.
! To output the sound from the [BOOTH OUT] terminals, connect
speakers or other devices to the [BOOTH OUT] terminals.
! For details on connecting the input/output terminals, see the
Operating Instructions.
3 Connect this unit to your computer via a USB cable.
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
SLOT
SAVE
START
FLIP
REC
LOOP ON/OFF
4 BEAT
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
4 BEAT
SLOT
SAVE
START
FLIP
REC
LOOP ON/OFF
INST.DOUBLES INST.DOUBLES I NST.DOUBLESINST.DOUBLES
SYNC OFF SYNC OFF
USB cable
(included)
4 Turn on the computer’s power.
5 Connect the power plug to the AC adapter.
Slide the power plug into the AC adapter’s guide rails as shown on the
diagram and press in until a click is heard.
! For detailed cautions on the AC adapter, see “About the AC
adapter (p. 13 ).
! The shape of the plug differs according to the region in which the
unit is sold.
6 Connect the AC adapter.
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
SLOT
SAVE
START
FLIP
REC
LOOP ON/OFF
4 BEAT
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
4 BEAT
SLOT
SAVE
START
FLIP
REC
LOOP ON/OFF
INST.DOUBLES INST.DOUBLES INST.DOUBLESINST.DOUBLES
SYNC OFF SYNC OFF
AC adapter
(included)
To power outlet
7 Press the [STANDBY/ON] switch on this unit’s rear
panel to turn this unit’s power on.
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
SLOT
SAVE
START
FLIP
REC
LOOP ON/OFF
4 BEAT
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
4 BEAT
SLOT
SAVE
START
FLIP
REC
LOOP ON/OFF
INST.DOUBLES INST.DOUBLES I NST.DOUBLESINST.DOUBLES
SYNC OFF SYNC OFF
Turn on the power of this unit.
! For Windows users
The message [Installing device driver software] may appear
when this unit is first connected to the computer or when it is
connected to a different USB port on the computer. Wait a while
until the message [Your devices are ready for use] appears.
8 Turn on the power of the devices connected to the
output terminals (powered speakers, power amplifier,
components, etc.).
! When a microphone, DJ player or other external device is con-
nected to input terminals, the power of that device also turns on.
En
11
English
Starting the system
Launching Serato DJ
This manual consists mainly of explanations of functions of this unit as hardware. For detailed instructions on operating the Serato DJ software, see
the Serato DJ software manual.
For Windows 7
From the Windows [Start] menu, click the [Serato DJ] icon under [All Programs] > [Serato] > [Serato DJ].
For Windows 8.1
From [Apps view], click the [Serato DJ] icon.
For Mac OS X
In Finder, open the [Applications] folder, then click the [Serato DJ] icon.
Computer screen directly after the Serato DJ software is launched
A A
C
B
1 The [BUY/ACTIVATE] icon may appear on the right side of the screen displayed when Serato DJ is launched for the first time, but for those using
DDJ-SX2 there is no need to activate or purchase a license. You can purchase extended packs such as DVS and use them as additional options.
2 Click [Online] to use the unit as is.
Computer screen when a track is loaded in the Serato DJ software
Click [Library] at the upper left of the computer screen, then select [Vertical] or [Horizontal] from the pull-down menu to switch the Serato DJ screen.
AA
C
B
A Deck section
The track information (the name of the loaded track, artist name, BPM, etc.), the overall waveform and other information is displayed here.
B Waveform display
The loaded track’s waveform is displayed here.
C Browser section
Crates in which tracks in the library or sets of multiple tracks are stored are displayed here.
En
12
Importing tracks
The following describes the typical procedure for importing tracks.
! There are various ways to import tracks with the Serato DJ software.
For details, see the Serato DJ software manual.
! If you are already using Serato DJ software (Scratch Live, ITCH or
Serato DJ Intro) and have already created track libraries, the track
libraries you have previously created can be used as such.
! If you are using Serato DJ Intro and have already created track librar-
ies, you may have to reanalyze the tracks.
1 Click the [Files] key on the Serato DJ software screen
to open the [Files] panel.
The contents of your computer or the peripheral connected to the com-
puter are displayed in the [Files] panel.
2 Click the folder on the [Files] panel containing the
tracks you want to add to the library to select it.
3 On the Serato DJ software screen, drag and drop the
selected folder to the crates panel.
A crate is created and the tracks are added to the library.
a [Files] panel
b Crates panel
Loading tracks and playing them
The following describes the procedure for loading tracks into deck [1] as
an example.
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
SLOT
SAVE
START
FLIP
REC
LOOP ON/OFF
4 BEAT
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
4 BEAT
SLOT
SAVE
START
FLIP
REC
LOOP ON/OFF
INST.DOUBLES INST.DOUBLES INST. DOUBLESINST.DOUBLES
SYNC OFF SYNC OFF
INST. DOUBLES INST. DOUBLES
1 Rotary selector
2 BACK button
3 LOAD button
1 Press this unit’s [BACK] button, move the cursor to
the crates panel on the computer’s screen, then turn the
rotary selector to select the crate, etc.
2 Press the rotary selector, move the cursor to the
library on the computer’s screen, then turn the rotary
selector and select the track.
a
b
a Library
b Crates panel
3 Press the [LOAD] button to load the selected track
onto the deck.
Playing tracks and outputting the sound
The following describes the procedure for outputting the channel 1
sound as an example.
! Set the volume of the devices (power amplifier, powered speakers,
etc.) connected to the [MASTER OUT 1] and [MASTER OUT 2]
terminals to an appropriate level. Note that loud sound will be output
if the volume is set too high.
INST. DOUBLES INST. DOUBLES INST. DOUBLESINST. DOUBLES
a
b
d
c
e
4
8
7
5
6
9
f hg
4 TRIM control
5 EQ (HI, MID, LOW) controls
6 FILTER control
7 Headphones CUE button
En
13
English
8 Channel fader
9 Crossfader Assign Switch
a MASTER LEVEL control
b BOOTH MONITOR LEVEL control
c HEADPHONES MIX control
d MASTER CUE button
e Crossfader
f HEADPHONES LEVEL control
g INPUT SELECT switch
h CROSS FADER CURVE selector switch
1
Set the positions of the controls, etc., as shown below.
Names of controls, etc. Position
MASTER LEVEL control Turned fully counterclockwise
TRIM control Turned fully counterclockwise
EQ (HI, MID, LOW) controls Center
FILTER control Center
Channel fader Moved forward
Crossfader Assign Switch [THRU] position
INPUT SELECT switch [PC] position
2 Press the [f] button to play the track.
CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER
SLOT
SAVE
START
FLIP
REC
LOOP ON/OFF
4 BEAT
CUE
INST.DOUBLES INST.DOUBLES INST. DOUBLESINST.DOUBLES
SYNC OFF SYNC OFF
3 Move the channel fader away from you.
4 Turn the [TRIM] control.
Adjust [TRIM] so that the orange indicator on the channel level indicator
lights at the peak level.
5 Turn the [MASTER LEVEL] control to adjust the audio
level of the speakers.
Adjust the sound level output from the [MASTER OUT 1] and [MASTER
OUT 2] terminals to an appropriate level.
Monitoring sound with headphones
Set the positions of the controls, etc., as shown below.
Names of controls, etc. Position
HEADPHONES MIX control Center
HEADPHONES LEVEL control Turned fully counterclockwise
1 Press the headphones [CUE] button for the channel 1.
2 Turn the [HEADPHONES LEVEL] control.
Adjust the sound level output from the headphones to an appropriate
level.
Note
This unit and the Serato DJ software include a variety of functions
enabling individualistic DJ performances. For details on the respective
functions, see the operating instructions and the Serato DJ software
manual.
! This unit’s operating instructions can be downloaded from the
Pioneer DJ support site. For details, see Acquiring this unit’s
Operating Instructions (p. 3 ).
!
The Serato DJ software manual can be downloaded from “Serato.com”.
For details, see Downloading the Serato DJ software manual (p. 3 ).
Quitting the system
1 Quit Serato DJ.
When the software is closed, a message for confirming that you want to
close it appears on the computer’s screen. Click [Yes] to close.
2 Press the [STANDBY/ON] switch on this unit’s rear
panel to set this unit’s power to standby.
3 Disconnect the USB cable from your computer.
About the AC adapter
Safety instructions
To ensure your personal safety and to maximize the full operating poten-
tial of your unit, read and follow these safety instructions.
Read & Retain Instructions
Read all operating and user information provided with this product.
Cleaning
Use a damp cloth to clean the exterior housing. Avoid using any fluids
including liquid, aerosol or alcohol-based cleaning products.
Water or Moisture
Avoid operating or locating this product near water or other sources of
fluid.
Accessories
Do not place this product on an unstable cart, stand, or table. The prod-
uct may fall and be seriously damaged.
Ventilation
Do not block or cover this product in use. This unit should not be placed
in a built-in installation unless properly ventilated.
Environment
Avoid placing this product in a location with exposure to large quantities
of dust, high temperatures, high humidity, or subject to excessive vibra-
tions or shocks.
Power Sources
Operate this product only from the recommended power sources. If
you are unsure of the power source, consult an authorized Pioneer
representative.
Power-Cord Protection
When unplugging the unit, pull on the plug – not on the cord. Do not
handle the cord or plug with wet hands; doing so could cause an electric
short or shock. Do not allow anything to pinch or rest on the power cord
and do not place in a walkway.
En
14
Power
Turn OFF the system before installing this or any other hardware device.
Overloading
Avoid connecting too many devices to a single wall socket or power
source as this can cause fires or short circuits.
Object & Liquid Entry
Never push inappropriate objects in to the device. Avoid spilling any
liquids in to or on the outside of the drive.
Servicing
Opening or removing the cover exposes you to possible electrical shock
or other danger. Contact a Pioneer authorized service representative for
repairing this product (refer to the enclosed Service & Support Card).
Damage Requiring Service
Unplug the unit and refer servicing to qualified service personnel in the
following situations:
% When the power cord, plug, or chassis is damaged.
% If liquid has been spilled, or objects have fallen into the product.
% If the product has been exposed to rain or water.
% If the product does not operate normally when the operating instruc-
tions are followed. Adjust only those controls that are covered by the
operating instructions. Improper adjustment of other controls may
result in damage and can require extensive work by a qualified tech-
nician to restore the unit to its normal operation.
% When the product exhibits a distinct change in performance – this
indicates a need for service.
Check that there are no irregularities with the AC adapter or power plug,
then insert the power plug into the specified position of the AC adapter
using the specified procedure until a click is heard. For details, see
Mounting the power plug on page 14 .
If there are irregularities with the AC adapter or power plug, ask your
nearest Pioneer authorized service center or your dealer to carry out
repair work.
! Do not use this unit with a coin, paper clip or other metal object
stuck between the AC adapter and power plug. Doing so could cause
a short circuit, leading to fire or electric shock.
! When mounting the AC adapter on a wall outlet, make sure there is
no space between the AC adapter and the wall outlet. Faulty contact
or a coin, paper clip or other metal object getting stuck in the space
could cause a short circuit, leading to fire or electric shock.
Coin, paper clip or other metal object
Top
Side
! The power plug could come detached from the AC adapter and
remain in the power outlet if someone trips on the AC adapter’s
power cord or if something hits the AC adapter. If this happens,
remove the power plug remaining in the outlet with dry hands, hold-
ing it as shown on the diagram below and without touching metal
parts. Do not use any tools to remove it.
Do not touch.
Mounting the power plug
Slide the power plug along the guide rails in the AC
adapter unit as shown on the diagram below, then press
in until a click is heard.
Removing the power plug
While pressing the [PUSH] button on the AC adapter
unit, slide the power plug away from the adapter as
shown on the diagram below to remove it.
Once the power plug is mounted, there is no need to remove it.
En
15
English
Power plug
This product comes with the types of power plugs shown below. Use the
appropriate power plug for the country or region you are in.
Type 1 (for Japan, Mexico, and other areas where the
Type 1 plug is used)
Type 2
Type 3 (for Hong Kong, Malaysia, Singapore, and other
areas where the Type 3 plug is used)
Type 4 (for Australia, New Zealand, and other areas
where the Type 4 plug is used)
Type 5 (for Thailand, South Korea, and other areas
where the Type 5 plug is used)
En
16
Additional information
Changing the settings
! This unit allows you to adjust the sensitivity of the jog dial and restrict
operation of the [NEEDLE SEARCH] pad.
For details on how to change settings on this unit, see the “Changing
the settings” section in the Operating Instructions, which can be
downloaded from the Pioneer DJ support site.
Troubleshooting
! Incorrect operation is often mistaken for trouble or malfunction. If
you think that there is something wrong with this component, check
the items in the “Troubleshooting” section of this unit’s operating
instructions and the [FAQ] for the [DDJ-SX2] on the Pioneer DJ sup-
port site.
http://pioneerdj.com/support/
Sometimes the problem may lie in another component. Inspect the
other components and electrical appliances being used. If the prob-
lem cannot be rectified, ask your nearest Pioneer authorized service
center or your dealer to carry out repair work.
! This unit may not operate properly due to static electricity or other
external influences. In this case, proper operation may be restored by
turning the power off, waiting 1 minute, then turning the power back
on.
About trademarks and registered
trademarks
! Pioneer is a registered trademark of PIONEER CORPORATION.
The names of companies and products mentioned herein are the trade-
marks of their respective owners.
Cautions on copyrights
Recordings you have made are for your personal enjoyment and accord-
ing to copyright laws may not be used without the consent of the copy-
right holder.
! Music recorded from CDs, etc., is protected by the copyright laws of
individual countries and by international treaties. It is the full respon-
sibility of the person who has recorded the music to ensure that it is
used legally.
! When handling music downloaded from the Internet, etc., it is the
full responsibility of the person who has downloaded the music to
ensure that it is used in accordance with the contract concluded
with the download site.
Specifications
AC adapter
Power ............................................................ AC 100 V to 240 V, 50 Hz/60 Hz
Rated current .....................................................................................800 mA
Rated output ................................................................................. DC 5 V, 3 A
General – Main Unit
Main unit weight ...................................................................................5.8 kg
Max. external dimensions
.............................. 664 mm (width) x 70.4 mm (height) x 353.4 mm (depth)
Tolerable operating temperature ........................................+5 °C to +35 °C
Tolerable operating humidity ...................... 5 % to 85 % (no condensation)
Audio Section
Sampling rate ....................................................................................44.1 kHz
A/D, D/A converter ............................................................................... 24 bits
Frequency characteristic
USB, CD/LINE, MIC1, MIC2 ............................................ 20 Hz to 20 kHz
S/N ratio (rated output, A-WEIGHTED)
USB ................................................................................................ 107 dB
CD/LINE ........................................................................................... 96 dB
PHONO ............................................................................................ 87 dB
MIC .................................................................................................. 80 dB
Total harmonic distortion (20 Hz — 20 kHzBW)
USB ...............................................................................................0.003 %
CD/LINE ........................................................................................ 0.005 %
Standard input level / Input impedance
CD/LINE ............................................................................ –12 dBu/47 kW
PHONO ............................................................................. –52 dBu/47 kW
MIC .....................................................................................–57 dBu/3 kW
Standard output level / Load impedance / Output impedance
MASTER OUT 1 .....................................................+6 dBu/10 kW/330 W
MASTER OUT 2 ....................................................... +2 dBu/10 kW/1 kW
BOOTH OUT ...........................................................+6 dBu/10 kW/330 W
PHONE .......................................................................+4 dBu/32 W/32 W
Rated output level / Load impedance
MASTER OUT 1 ................................................................. 24 dBu/10 kW
MASTER OUT 2 ................................................................. 20 dBu/10 kW
BOOTH OUT ...................................................................... 24 dBu/10 kW
Crosstalk
CD/LINE ........................................................................................... 82 dB
Channel equalizer characteristic
HI .....................................................................–26 dB to +6 dB (13 kHz)
MID ....................................................................–26 dB to +6 dB (1 kHz)
LOW ...................................................................–26 dB to +6 dB (70 Hz)
Input / Output terminals
CD input terminal
RCA pin jack ....................................................................................2 sets
PHONO/LINE input terminals
RCA pin jack ....................................................................................2 sets
MIC1 terminal
XLR connector/phone jack (Ø 6.3 mm) ...........................................1 set
MIC2 terminal
Phone jack (Ø 6.3 mm) ..................................................................... 1 set
MASTER OUT 1 output terminal
XLR connector...................................................................................1 set
MASTER OUT 2 output terminal
RCA pin jacks ....................................................................................1 set
BOOTH OUT output terminal
Phone jack (Ø 6.3 mm) ..................................................................... 1 set
PHONES output terminal
Stereo phone jack (Ø 6.3 mm) .........................................................1 set
Stereo mini phone jack (Ø 3.5 mm) ................................................. 1 set
USB terminal
B type ................................................................................................. 1 set
! For improvement purposes, specifications and design of this unit
and the included software are subject to change without notice.
! © 2014 PIONEER CORPORATION. All rights reserved.
Es
2
PRECAUCI
Ó
N
PA
RA PREVENIR EL PELIGRO DE CHOQUE ELÉCTRICO
NO REMOVER
LA TAPA NI LAS PARTES DENTRO NO
UTILIZADAS, LL
AMAR UNA PERSONA CUALIFICADA.
D3-4-2-1-1_B2_Es
ADVER
TENCIA
Este aparato no es impermeable.
Para evitar el riesgo
de incendio y de descargas eléctricas, no ponga ningún
recipiente lleno de líquido (como pueda ser un vaso o
un florero) cerca del aparato ni lo exponga a gote
o,
salpicaduras, lluvia o humedad
.
D3-4-2-1-3_A1_Es
ADVER
TENCIA
Pa
ra evitar el peligro de incendio, no ponga nada con
fuego encendido (como pueda ser una vela) encima del
aparat
o.
D3-4-2-1-7a_A1_Es
Entor
no de funcionamiento
Te
mperatura y humedad del entorno de funcionamiento
+5 °C a +35 °C; menos del 85 % de humedad relativa
(rejillas de refrigeración no obstruidas
)
No instale este aparato en un lugar mal ventilado
, ni en
lugares expuestos a alta humedad o a la luz directa del
sol (o de otra luz artificial potente).
D3-4-2-1-7c*_A1_Es
PRECAUCIÓN
El interruptor de la alimentación STANDBY/ON de
este aparato no corta por completo toda la
alimentación de la toma de corriente de CA. Puesto
que el cable de alimentación hace las funciones de
dispositivo de desconexión de la corriente para el
aparato, para desconectar toda la alimentación del
aparato deberá desenchufar el cable de la toma de
corriente de CA. Por lo tanto, asegúrese de instalar
el aparato de modo que el cable de alimentación
pueda desenchufarse con facilidad de la toma de
corriente de CA en caso de un accidente. Para evitar
correr el peligro de incendio, el cable de
alimentación también deberá desenchufarse de la
toma de corriente de CA cuando no se tenga la
intención de utilizarlo durante mucho tiempo
seguido (por ejemplo, antes de irse de vacaciones).
D3-4-2-2-2a*_A1_Es
Cuando utilice este producto, confirme la
información de seguridad mostrada en la parte
inferior de la unidad.
D3-4-2-2-4_B1_Es
Este producto es para tareas domésticas generales.
Cualquiera avería debida a otra utilización que tareas
domésticas (tales como el uso a largo plazo para
motivos de negocios en un restaurante o el uso en un
coche o un barco) y que necesita una reparación
hará que cobrarla incluso durante el período de
garantía.
K041_A1_Es
PRECAUCIONES CONCERNIENTES A LA
MANIPULACIÓN DEL CABLE DE
ALIMENT
ACIÓN
To
me el cable de alimentación por la clavija. No
extraiga la clavija tirando del cable. Nunca toque el
cable de alimentación cuando sus manos estén
mojadas, ya que esto podría causar cortocircuitos o
descargas eléctricas. No coloque la unidad, algún
mueble, etc., sobre el cable de alimentación
.
Asegúrese de no hacer nudos en el cable ni de unirlo a
otros cables. Los cables de alimentación deberán ser
dispuestos de tal forma que la probabilidad de que
sean pisados sea mínima. Una cable de alimentación
dañado podrá causar incendios o descargas eléctricas.
Re
vise el cable de alimentación está dañado, solicite el
reemplazo del mismo al centro de se
rvicio autorizado
PIONEER más cercan
o, o a su distribuidor.
S002*_A1_Es
Es
3
Español
Antes de empezar a usar la unidad
Cómo leer este manual
! Gracias por haber adquirido este producto Pioneer.
¡Asegúrese de leer este folleto y el manual de instrucciones! Ambos
documentos incluyen información importante que usted deberá
entender antes de usar este producto.
Después de haber terminado de leer estas instrucciones, guárdelas
en un lugar seguro para, en caso de ser necesario, consultarlas en el
futuro.
Para las instrucciones sobre cómo adquirir el manual de instruc-
ciones, vea Adquisición del manual (página 3 ).
! En este manual, los nombres de las pantallas y de los menús mostra-
dos en el producto y en la pantalla del ordenador, así como también
los nombres de los botones, de los terminales, etc., se indican entre
paréntesis. (Ejemplo: Botón [CUE], panel [Files], terminal [MIC1])
! Note que las pantallas y las especificaciones del software descritas
en este manual, así como también la apariencia externa y las espe-
cificaciones del hardware, están actualmente en fase de desarrollo y
pueden ser distintas de las especificaciones finales.
! Note que dependiendo de la versión del sistema operativo, los ajus-
tes del navegador web, etc., la operación puede que sea distinta de
los procedimientos descritos en este manual.
Contenido de la caja
! Adaptador de CA
! Clavija de alimentación
! Cable USB
! Garantía (para algunas regiones)
1
! Manual de instrucciones (Guía de inicio rápido) (este documento)
! Serato DJ EXPANSION PACK VOUCHER
2
1 Para la región japonesa, la información correspondiente se provee
en la contracubierta del “Manual de instrucciones (Guía de inicio
rápido)”.
2 Observe que el Serato DJ EXPANSION PACK VOUCHER no puede
volver a emitirse. Deberá utilizar el código de cupón para activar el
paquete de expansión. Asegúrese de guardarlo en un lugar seguro
de modo que no lo pueda perder.
Adquisición del manual
Las diversas instrucciones se proveen algunas veces como archivos
en formato PDF. Para ver archivos en formato PDF, deberá instalarse
Adobe
®
Reader
®
.
Adquisición del Manual de instrucciones
de esta unidad
1 Inicie un navegador de Web en el ordenador y acceda
al sitio de asistencia Pioneer DJ de abajo.
http://pioneerdj.com/support/
2 En el sitio de asistencia Pioneer DJ, haga clic en
[Manuals] bajo [DDJ-SX2].
3 Haga clic en el idioma necesario de la página de
descarga.
La descarga del manual de instrucciones empieza.
Descarga del manual del software Serato DJ
1 Inicie un navegador de Web en el ordenador y acceda
al sitio de asistencia Pioneer DJ de abajo.
http://pioneerdj.com/support/
2 Haga clic en [Software Info] bajo [DDJ-SX2] en el sitio
de asistencia Pioneer DJ.
3 Haga clic en el icono Serato DJ y luego en el enlace
con la página de descarga Serato DJ.
La página de descarga de Serato DJ se visualiza.
4 Entre en su cuenta de usuario “Serato.com”.
Introduzca la dirección de correo electrónico y la contraseña que ha
registrado para entrar en “Serato.com”.
5 Desde “More Downloads”, en el lado derecho
de la página de descarga, haga clic en el manual
correspondiente.
La descarga del manual del software Serato DJ empieza.
Instalación del software
Antes de instalar el software
No se incluye el software Serato DJ y el software controlador.
Acceda al software y descárguelo desde el sitio de asistencia de
Pioneer DJ.
http://pioneerdj.com/support/
! El usuario es responsable de preparar el ordenador, los aparatos
de la red y otros elementos que se usan en el ambiente de Internet
y que son necesarios para conectar a Internet.
Acerca del software controlador
(Windows)
Este software controlador es un controlador ASIO exclusivo que se usa
para enviar señales de audio desde el ordenador.
! Cuando se usa Mac OS X no es necesario instalar el software
controlador.
Obtención del software controlador
1 Inicie un navegador de Web en el ordenador y acceda
al sitio de asistencia Pioneer DJ de abajo.
http://pioneerdj.com/support/
2 Haga clic en [Software Download] bajo [DDJ-SX2] en
el sitio de asistencia Pioneer DJ.
3 Haga clic en el icono del software controlador para
descargar el software controlador desde la página de
descarga.
Acerca del software Serato DJ
Serato DJ es una aplicación de software DJ de Serato. Las actuaciones
de DJ son posibles conectando a esta unidad el ordenador en el que
está instalado este software.
Ambiente de operación mínimo
Sistemas operativos
compatibles
CPU y memoria necesaria
Mac OS X: 10.9, 10.8
y 10.7
versión de
32 bits
Procesador Intel
®
Core i3, i5 e i7
1,07 GHz o suprior, procesador Intel
®
Core 2 Duo 2,0 GHz o superior
RAM de 2 GB o más
versión de
64 bits
Procesador Intel
®
Core i3, i5 e i7
1,07 GHz o suprior, procesador Intel
®
Core 2 Duo 2,4 GHz o superior
RAM de 4 GB o más
Es
4
Sistemas operativos
compatibles
CPU y memoria necesaria
Windows: Windows 8,1 y
Windows 7
versión de
32 bits
Procesador Intel
®
Core i3, i5 e i7
1,07 GHz o suprior, procesador Intel
®
Core 2 Duo 2,0 GHz o superior
RAM de 2 GB o más
versión de
64 bits
Procesador Intel
®
Core i3, i5 e i7
1,07 GHz o suprior, procesador Intel
®
Core 2 Duo 2,4 GHz o superior
RAM de 4 GB o más
Otros
Puerto USB
Para conectar el ordenador con esta unidad se
requiere un puerto USB 2.0.
Resolución de la
pantalla
Resolución de 1 280 x 720 o más
Conexión a Internet
Para registrar la cuenta del usuario “Serato.com” y des-
cargar el software se necesita una conexión a Internet.
! Para obtener información sobre los requisitos más actuales del sistema, la
compatibilidad y los sistemas operativos compatibles, vea “Software Info” de
DDJ-SX2” en el sitio de asistencia de Pioneer DJ siguiente.
http://pioneerdj.com/support/
! La operación no se garantiza en todos los ordenadores, aunque se cumplan
todas las condiciones indicadas aquí para el ambiente de operación necesario.
! Dependiendo de la configuración de ahorro de energía del ordenador, etc., la
CPU y el disco duro pueden no proveer la capacidad de procesamiento sufi-
ciente. Para los ordenadores portátiles en particular, asegúrese de que estén en
condiciones apropiadas para ofrecer un alto rendimiento constante (por ejem-
plo, manteniendo la alimentación de CA conectada) cuando se usa Serato DJ.
! Para usar Internet se necesita firmar un contrato separado con un proveedor
que ofrezca servicios de Internet y pagar los honorarios de dicho proveedor.
! La asistencia del sistema operativo asume que usted está usando el parche de
seguridad más reciente para esa versión.
Obtención del software Serato DJ
1 Inicie un navegador de Web en el ordenador y acceda
al sitio de asistencia Pioneer DJ de abajo.
http://pioneerdj.com/support/
2 Haga clic en [Software Download] bajo [DDJ-SX2] en
el sitio de asistencia Pioneer DJ.
3 Haga clic en el icono Serato DJ y luego en el enlace
con la página de descarga Serato DJ.
La página de descarga de Serato DJ se visualiza.
4 Entre en su cuenta de usuario “Serato.com”.
! Si ya ha registrado una cuenta de usuario en “Serato.com”, vaya
al paso 6.
! Si no ha completado el registro de su cuenta de usuario, hágalo
siguiendo el procedimiento de abajo.
Siguiendo las instrucciones de la pantalla, introduzca su
dirección de correo electrónico y contraseña que quiera
establecer y luego seleccione la región donde vive.
Si marca [E-mail me Serato newsletters] se le enviarán
desde Serato boletines con la información más reciente de
los productos Serato.
Una vez completado el registro de la cuenta del usuario,
usted recibirá un correo electrónico en la dirección de correo
electrónico que haya introducido. Verifique el contenido del
correo electrónico enviado desde “Serato.com”.
! Tenga cuidado para no olvidar la dirección de correo electrónico
y la contraseña especificadas al hacer el registro del usuario.
Éstas serán necesarias para actualizar el software.
! La información personal introducida al registrar una cuenta de
usuario nueva puede recopilarse, procesarse y usarse basándose
en la política de privacidad del sitio Web de Serato.
5 Haga clic en el vínculo en el mensaje de correo
electrónico enviado desde “Serato.com”.
Esto le lleva a la página de descarga Serato DJ. Vaya al paso 7.
6 Inicie la sesión.
Introduzca la dirección de correo electrónico y la contraseña que ha
registrado para entrar en “Serato.com”.
7 Descargue el software Serato DJ desde la página de
descarga.
Acerca del procedimiento de instalación
El procedimiento de instalación depende del sistema operativo (OS) del
ordenador que está usando.
Para Windows
Después de instalar el software controlador, instale el software Serato
DJ.
Para Mac OS X
Instale solo el software Serato DJ.
Procedimiento de instalación (Windows)
No conecte esta unidad y el ordenador hasta completar la instalación.
! Inicie la sesión como el usuario que fue establecido como adminis-
trador del ordenador antes de hacer la instalación.
! Si está ejecutándose cualquier otro programa en el ordenador,
abandónelo.
1 Haga doble clic en el software controlador
descargado (Pioneer_DDJ_SX2_Driver_x.xxx.exe).
2 Siga con la instalación según las instrucciones de la
pantalla.
Si aparece [Seguridad de Windows] en la pantalla mientras se realiza
la instalación, haga clic en [Instalar este software de controlador de
todas formas] y continúe con la instalación.
Cuando termina la instalación del programa aparece un mensaje de
terminación.
Después de instalar el software controlador, instale el software Serato
DJ.
3 Descomprima el archivo de software Serato DJ
descargado.
4 Haga doble clic en el archivo de software
descomprimido para ejecutar el instalador.
5 Lea con cuidado los términos del acuerdo de licencia
y, si está de acuerdo, seleccione [I agree to the license
terms and conditions] y luego haga clic en [Install].
! Si no acepta el contenido del acuerdo de uso, haga clic en
[Close] para cancelar la instalación.
La instalación empieza.
El mensaje de instalación satisfactoria aparece una vez terminada la
instalación.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52

Pioneer DDJ-SX2 クイックスタートガイド

カテゴリー
DJコントローラー
タイプ
クイックスタートガイド