Pioneer DDJ-SX2 クイックスタートガイド

DJ Controller

Controlador DJ

DDJ-SX2

The Pioneer DJ support site shown above offers FAQs, information on software and various other types of

information and services to allow you to use your product in greater comfort.

For the latest version of the Serato DJ software, access Serato.com and download the software from there.

Operating Instructions (Quick Start Guide)

Manual de instrucciones (Guía de inicio rápido)

El sitio de asistencia Pioneer DJ mostrado arriba ofrece las preguntas frecuentes, información del software y

varios otros tipos de información y servicios que le permitirán usar su producto con mayor confort.

Para la versión más reciente del software Serato DJ, acceda a Serato.com y descargue el software desde allí.

http://pioneerdj.com/support/

http://serato.com/

English Español

CAUTION

TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

D3-4-2-1-1_B1_En

WARNING

This equipment is not waterproof

. To prevent a fire or

shock hazard, do not place any container filled with

liquid near this equipment (such as a vase or flower

pot) or expose it to dripping, splashing, rain or

moisture

D3-4-2-1-3_A1_En

WARNING

prevent a fire hazard, do not place any naked flame

sources (such as a lighted candle) on the equipment.

D3-4-2-1-7a_A1_En

Operating Envir

onment

Operating environment temperature and humidit

+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH

(cooling vents not blocked)

Do not install this unit in a poorly ventilated area, or in

locations exposed to high humidity or direct sunlight (or

strong artificial light).

D3-4-2-1-7c*_A2_En

CAUTION

The STANDBY/ON switch on this unit will not

completely shut off all power from the AC outlet.

Since the power cord serves as the main disconnect

device for the unit, you will need to unplug it from the

AC outlet to shut down all power. Therefore, make

sure the unit has been installed so that the power

cord can be easily unplugged from the AC outlet in

case of an accident. To avoid fire hazard, the power

cord should also be unplugged from the AC outlet

when left unused for a long period of time (for

example, when on vacation).

D3-4-2-2-2a*_A1_En

When using this product, confirm the safety

information shown on the bottom of the unit.

D3-4-2-2-4_B1_En

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

D8-10-1-2_A1_En

Information to User

Alterations or modifications carried out without

appropriate authorization may invalidate the user’s

right to operate the equipment.

D8-10-2_A1_En

FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Product Name: DJ Controller

Model Number: DDJ-SX2

Responsible Party Name: PIONEER ELECTRONICS (USA) INC.

SERVICE SUPPORT DIVISION

Address: 1925 E. DOMINGUEZ ST. LONG BEACH, CA 90810-1003, U.S.A.

Phone: 1-800-421-1404

URL: http://www.pioneerelectronics.com

D8-10-4*_C1_En

This product is for general household purposes. Any

failure due to use for other than household purposes

(such as long-term use for business purposes in a

restaurant or use in a car or ship) and which requires

repair will be charged for even during the warranty

period. K041_A1_En

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the

plug by tugging the cord and never touch the power

cord when your hands are wet as this could cause a

short circuit or electric shock. Do not place the unit, a

piece of furniture, etc., on the power cord, or pinch the

cord. Never make a knot in the cord or tie it with other

cords. The power cords should be routed such that they

are not likely to be stepped on. A damaged power cord

can cause a fire or give you an electrical shock. Check

the power cord once in a while. When you find it

damaged, ask your nearest PIONEER authorized

service center or your dealer for a replacement.

S002*_A1_En

English

Before start

How to read this manual

! Thank you for buying this Pioneer product.

Be sure to read both this leaflet and the operating instructions! Both

documents include important information that you must understand

before using this product.

After you have finished reading the instructions, put them away in a

safe place for future reference.

— For instructions on acquiring the operating instructions, see

Acquiring the manual (p. 3 ).

! In this manual, names of screens and menus displayed on the prod-

uct and on the computer screen, as well as names of buttons and

terminals, etc., are indicated within brackets. (e.g.: [CUE] button,

[Files] panel, [MIC1] terminal)

! Please note that the screens and specifications of the software

described in this manual as well as the external appearance and

specifications of the hardware are currently under development and

may differ from the final specifications.

! Please note that depending on the operating system version, web

browser settings, etc., operation may differ from the procedures

described in this manual.

What’s in the box

! AC adapter

! Power plug

! USB cable

! Warranty (for some regions)

! Operating Instructions (Quick Start Guide) (This document)

! Serato DJ EXPANSION PACK VOUCHER

1 For the Japanese region, the corresponding information is provided

on the back cover of the “Operating Instructions (Quick Start Guide)”.

2 Note that the Serato DJ EXPANSION PACK VOUCHER cannot be

reissued. You will need to use the voucher code to activate the expan-

sion pack. Make sure to store it in a safe place so that you do not lose

it.

Acquiring the manual

Various instructions are sometimes provided as files in PDF format.

Adobe

Reader

must be installed in order to view PDF format files.

Acquiring this unit’s Operating

Instructions

1 Launch a web browser on the computer and access

the Pioneer DJ support site below.

http://pioneerdj.com/support/

2 On the Pioneer DJ support site, click [Manuals] under

[DDJ-SX2].

3 Click on the required language on the download

page.

Downloading of the operating instructions begins.

Downloading the Serato DJ software

manual

1 Launch a web browser on the computer and access

the Pioneer DJ support site below.

http://pioneerdj.com/support/

2 Click [Software Info] under [DDJ-SX2] on the Pioneer

DJ support site.

3 Click the Serato DJ icon and then click the link to the

Serato DJ download page.

The Serato DJ download page is displayed.

4 Log in to your “Serato.com” user account.

Input the e-mail address and password you have registered to log in to

“Serato.com”.

5 From “More Downloads” on the right side of the

download page, click the relevant manual.

Downloading of the Serato DJ software manual starts.

Installing the software

Before installing the software

The Serato DJ software and driver software are not included.

Access and download the software from the Pioneer DJ support site.

http://pioneerdj.com/support/

! The user is responsible for preparing the computer, network

devices and other elements of the Internet usage environment

required for a connection to the Internet.

About the driver software (Windows)

This driver software is an exclusive ASIO driver for outputting audio

signals from the computer.

! There is no need to install the driver software when using Mac OS X.

 Obtaining the driver software

1 Launch a web browser on the computer and access

the Pioneer DJ support site below.

http://pioneerdj.com/support/

2 Click [Software Download] under [DDJ-SX2] on the

Pioneer DJ support site.

3 Click the icon of the driver software to download the

driver software from the download page.

About the Serato DJ software

Serato DJ is a DJ software application by Serato. DJ performances are

possible by connecting the computer on which this software is installed

to this unit.

Minimum operating environment

Supported operating systems CPU and required memory

Mac OS X: 10.9, 10.8

and 10.7

32-bit

version

Intel

processor, Core™ i3, i5 and i7

1.07 GHz or better, Intel

processor,

Core™ 2 Duo 2.0 GHz or better

2 GB or more of RAM

64-bit

version

Intel

processor, Core™ i3, i5 and i7

1.07 GHz or better, Intel

processor,

Core™ 2 Duo 2.4 GHz or better

4 GB or more of RAM

Supported operating systems CPU and required memory

Windows: Windows 8.1

and Windows 7

32-bit

version

Intel

processor, Core™ i3, i5 and i7

1.07 GHz or better, Intel

processor,

Core™ 2 Duo 2.0 GHz or better

2 GB or more of RAM

64-bit

version

Intel

processor, Core™ i3, i5 and i7

1.07 GHz or better, Intel

processor,

Core™ 2 Duo 2.4 GHz or better

4 GB or more of RAM

Others

USB port

A USB 2.0 port is required to connect the computer

with this unit.

Display resolution Resolution of 1 280 x 720 or greater

Internet connection

An Internet connection is required for registering

the “Serato.com” user account and downloading the

software.

! For information on the latest system requirements, compatibility, and supported

operating systems, see “Software Info” of “DDJ-SX2” on the Pioneer DJ sup-

port site below.

http://pioneerdj.com/support/

! Operation is not guaranteed on all computers, even if all the required operating

environment conditions indicated here are fulfilled.

! Depending on the computer’s power-saving settings, etc., the CPU and hard

disk may not provide sufficient processing capabilities. For notebook comput-

ers in particular, make sure the computer is in the proper conditions to provide

constant high performance (for example by keeping the AC power connected)

when using Serato DJ.

! Use of the Internet requires a separate contract with a provider offering Internet

services and payment of provider fees.

! Operating System support assumes you are using the latest point release for

that version.

 Obtaining the Serato DJ software

1 Launch a web browser on the computer and access

the Pioneer DJ support site below.

http://pioneerdj.com/support/

2 Click [Software Download] under [DDJ-SX2] on the

Pioneer DJ support site.

3 Click the Serato DJ icon and then click the link to the

Serato DJ download page.

The Serato DJ download page is displayed.

4 Log in to your “Serato.com” user account.

! If you have already registered a user account on “Serato.com”,

proceed to step 6.

! If you have not completed registering your user account, do so

following the procedure below.

— Following the instructions on the screen, input your e-mail

address and the password you want to set, then select the

region in which you live.

— If you check [E-mail me Serato newsletters], newsletters

providing the latest information on Serato products will be

sent from Serato.

— Once user account registration is completed, you will receive

an e-mail at the e-mail address you have input. Check the

contents of the e-mail sent from “Serato.com”.

! Be careful not to forget the e-mail address and password speci-

fied when you performed user registration. They will be required

for updating the software.

! The personal information input when registering a new user

account may be collected, processed and used based on the

5 Click the link in the e-mail message sent from “Serato.

com”.

This takes you to the Serato DJ download page. Proceed to step 7.

6 Log in.

Input the e-mail address and password you have registered to log in to

“Serato.com”.

7 Download the Serato DJ software from the download

page.

About the installation procedure

The installation procedure depends on the operating system (OS) on the

computer you are using.

For Windows

After installing the driver software, install the Serato DJ software.

For Mac OS X

Only install the Serato DJ software.

 Installation Procedure (Windows)

Do not connect this unit and the computer until installation is

completed.

! Log on as the user which was set as the computer’s administrator

before installing.

! If any other programs are running on the computer, quit them.

1 Double-click the downloaded driver software

(Pioneer_DDJ_SX2_Driver_x.xxx.exe).

2 Proceed with installation according to the instructions

on the screen.

If [Windows Security] appears on the screen while the installation is

in progress, click [Install this driver software anyway] and continue

with the installation.

When the installation program is completed, a completion message

appears.

After installing the driver software, install the Serato DJ software.

3 Unzip the downloaded Serato DJ software file.

4 Double-click the unzipped software file to launch the

installer.

5 Read the terms of the license agreement carefully,

and if you agree, select [I agree to the license terms and

conditions], then click [Install].

! If you do not agree to the contents of the license agreement, click

[Close] to cancel installation.

Installation begins.

The message of successful installation appears once installation is

completed.

English

6 Click [Close] to quit the Serato DJ installer.

 Installation procedure (Mac OS X)

Do not connect this unit and the computer until installation is

completed.

! If any other programs are running on the computer, quit them.

1 Unzip the downloaded Serato DJ software file.

2 Double-click the unzipped software file to launch the

installer.

3 Read the terms of the license agreement carefully,

and if you agree, click [Agree].

! If you do not agree to the contents of the usage agreement, click

[Disagree] to cancel installation.

4 If the following screen appears, drag and drop the

[Serato DJ] icon on the [Applications] folder icon.

Part names and functions

For further details on each unit, refer to the Operating Instructions and

the Serato DJ software manual.

! For instructions on obtaining the Operating Instructions and the

Serato DJ software manual, see Acquiring the manual on page 3 .

CUE LOOP SAVED LOOP SLICER LOOP

VELOCITY SAMPLER

SLOT

SAVE

START

FLIP

REC

LOOP ON/OFF

4 BEAT

CUE LOOP SAVED LOOP SLICER LOOP

VELOCITY SAMPLER

4 BEAT

SLOT

SAVE

START

FLIP

REC

LOOP ON/OFF

INST.DOUBLES INST.DOUBLES INST.DOUBLESINST.DOUBLES

SYNC OFF SYNC OFF

1 Browser section

2 Deck section

3 Mixer section

4 Effect section

Browser section

INST. DOUBLES INST. DOUBLES INST. DOUBLESINST. DOUBLES

1 1 2 1 1

3 4

1 LOAD button

The selected tracks are loaded to the respective decks.

[SHIFT] + press:

The library’s track list is sorted when one of the [LOAD] buttons is

pressed.

2 Rotary selector

Turn:

The cursor moves vertically.

Press:

The next level is displayed.

3 BACK button

The cursor moves to the previous level.

[SHIFT] + press:

Switches the Serato DJ layout.

4 LOAD PREPARE button

Loads tracks to the [Prepare] panel.

[SHIFT] + press:

The panel display switches each time the button is pressed.

Deck section

CUE LOOP SAVED LOOP SLICER LOOP

VELOCITY SAMPLER

SLOT

SAVE

START

FLIP

REC

LOOP ON/OFF

4 BEAT

SYNC OFF

1 Jog dial

Turn top:

When the vinyl mode is on, the scratch operation is possible.

Turn outer section:

The pitch bend operation (adjustment of the playing speed) is possible.

[SHIFT] + Turn top:

The playback position skips in sync with the beat. (Skip mode)

2 NEEDLE SEARCH pad

By touching the pad, you can jump to the desired position in the

track loaded in the deck.

3 TEMPO slider

Use this to adjust the track playing speed.

4 KEY LOCK button

Turns the key lock function on and off.

[SHIFT] + press:

The [TEMPO] slider’s range of variation switches each time the but-

ton is pressed.

Press for over 1 second:

Sets the tempo (BPM) of the currently playing track back to its original tempo.

5 Takeover indicator

6 AUTO LOOP button

Turns the auto looping mode on and off.

[SHIFT] + press:

Switches looping between active and non-active. (Loop Active)

7 LOOP 1/2X button

Halves the loop playback length.

[SHIFT] + press:

During loop playback, moves the loop to the left by the amount equal

to its length. (Loop Shift)

English

8 LOOP 2X button

Doubles the loop playback length.

[SHIFT] + press:

During loop playback, moves the loop to the right by the amount

equal to its length. (Loop Shift)

9 LOOP IN button

Loop In Point is set.

[SHIFT] + press:

The loop slot switches.

Press for over 1 second:

Turns the auto 4-beat loop on.

a LOOP OUT button

The loop out point is set, and loop playback begins.

[SHIFT] + press:

Cancels loop playback. (Loop Exit)

After loop playback is canceled, playback returns to the previously

set loop in point and loop playback resumes. (Reloop)

b FLIP MODE SLOT button

c FLIP MODE REC button

d FLIP MODE START button

Allows you to record or call sequences such as HOT CUE operation.

This function (Serato Flip) needs to be activated before it can be

used.

For details, visit the Pioneer DJ support site below.

http://pioneerdj.com/support/

e HOT CUE mode button

Sets the hot cue mode.

[SHIFT] + press:

Sets the cue loop mode.

Press for over 1 second:

Turns the quantize on/off.

f ROLL mode button

Sets the roll mode.

[SHIFT] + press:

Sets the saved loop mode.

g SLICER mode button

Sets the slicer mode.

[SHIFT] + press:

Sets the slicer loop mode.

h SAMPLER mode button

Sets the sampler mode.

[SHIFT] + press:

Sets the velocity sampler mode.

i Performance pads

Control the hot cue, loop roll, slicer, sampler and other functions.

j PARAMETERc button, PARAMETERd button

Sets a parameter for the loop roll, slicer, sampler and other

functions.

k PLAY/PAUSE f button

Use this to play/pause tracks.

[SHIFT] + press:

The track returns to the temporary cue point and playback continues

from there. (Stutter)

l CUE button

This is used to set, play and call out temporary cue points.

[SHIFT] + press:

Loads the previous track in the track list. (Previous Track)

m SYNC button

The tempos (pitches) and beat grids of tracks on multiple decks can

be synchronized automatically.

[SHIFT] + press:

Cancels the sync mode.

n SHIFT button

When another button is pressed while pressing the [SHIFT] button, a

different function is called out.

! For details on operation using the [SHIFT] button, see the

Operating Instructions.

o DECK button

Switches the deck to be operated.

Pressing the [DECK3] button while holding down the [DECK1] but-

ton or pressing the [DECK1] button while holding down the [DECK3]

button:

Turns on DUAL DECK mode on the left deck.

Pressing the [DECK4] button while holding down the [DECK2] but-

ton or pressing the [DECK2] button while holding down the [DECK4]

button:

Turns on DUAL DECK mode on the right deck.

p GRID ADJUST button

When the jog dial is turned while pressing the [GRID ADJUST] but-

ton, the beat grid interval can be adjusted.

[SHIFT] + press:

Sets a beat marker. (Grid Set)

q GRID SLIDE button

When the jog dial is turned while pressing the [GRID SLIDE] button,

the overall beat grid can be slid to the left or right.

[SHIFT] + press:

Clears the beat markers. (Grid Clear)

r SLIP button

Turns the slip mode on and off.

[SHIFT] + press:

This switches the vinyl mode on/off.

s CENSOR button

The track is played in the reverse direction while the [CENSOR] but-

ton is pressed, and normal playback resumes when the button is

released.

[SHIFT] + press:

The track is played in the reverse direction. When the [SHIFT] and

[CENSOR] buttons are pressed again, reverse playback is canceled

and normal playback resumes.

t PANEL SELECT button

The panel display switches in the order below each time the button

is pressed.

Panel display off l [REC] panel l [FX] panel l [SP-6] panel l

Panel display off ...

[SHIFT] + press:

The panel display switches in the order below each time the button

is pressed.

Panel display off l [SP-6] panel l [FX] panel l [REC] panel l

Panel display off ...

Mixer section

INST. DOUBLES INST. DOUBLES INST. DOUBLESINST. DOUBLES

4 4

1 2 1 2 1 2 1 2

5 5

1 FX 1 assign button

Turns the effect unit FX1 on/off.

2 FX 2 assign button

Turns the effect unit FX2 on/off.

3 TRIM control

Adjusts the output size.

4 EQ (HI, MID, LOW) controls

Boosts or cuts frequencies.

5 Channel Level Indicator

Displays the sound level of the respective channels before passing

through the channel faders.

6 FILTER control

Applies the filter effect.

7 Headphones CUE/MIC TALK OVER button

The sound of channels for which the headphones [CUE] button is

pressed is output to the headphones.

When the [INPUT SELECT] switch for Channel 3 or Channel 4 is set

to [MIC1] or [MIC2], the talk over function can be turned on/off using

the switch.

[SHIFT] + press:

The track’s tempo can be set by tapping the button. (Tap function)

8 Headphones CUE button

The sound of channels for which the headphones [CUE] button is

pressed is output to the headphones.

[SHIFT] + press:

The track’s tempo can be set by tapping the button. (Tap function)

9 Channel fader

Move:

Adjusts the level of audio signals output in each channel.

[SHIFT] + move:

Use the channel fader start function.

a Crossfader Assign Switch

Assigns the channel output to the crossfader.

b Crossfader

Outputs the sound assigned with the crossfader assign switch.

[SHIFT] + move:

Uses the crossfader start function.

c MASTER LEVEL control

Adjusts the master sound level output.

d Master level indicator

Displays the master output’s audio level.

e Booth monitor level control

Adjusts the level of audio signals output from the [BOOTH OUT]

terminal.

f HEADPHONES MIX control

Adjusts the balance of the monitor volume between the sound of the

channels for which the headphones [CUE] button is pressed and the

sound of the master channel.

g MASTER CUE button

Turns monitoring of the master output’s sound on and off.

h SAMPLER VOLUME fader

Adjusts the sampler’s overall sound level.

Effect section

1 1 1 2

3 3 3 4

1 Effect parameter controls

These adjust the effects’ parameters.

2 FX BEATS control

Adjusts the effect time.

3 Effect parameter buttons

Turns the effect on and off or switches the parameter.

[SHIFT] + press:

Switches the effect type.

4 TAP button

The BPM used as the base value for the effect is calculated by the

interval at which the button is tapped with a finger.

When the button is pressed and held, the effect time is reset.

[SHIFT] + press:

Switches the effect mode.

English

Rear panel

4 5 62

3 7 6 5 8 a b c d9

1 MASTER OUT 1 terminals

Connect powered speakers, etc., here.

2 MASTER OUT 2 terminals

Connect to a power amplifier, etc.

3 BOOTH OUT terminals

Output terminals for a booth monitor, compatible with balanced or

unbalanced output for a TRS connector.

4 MIC2 terminal

Connects a microphone here.

5 CD terminals

Connect to a DJ player or other line level device.

6 PHONO/LINE input terminals

Connect a phono level output device (analog player (for MM car-

tridges), etc.) or a line level output device (DJ player, etc.) here.

Switch the terminals’ function according to the connected device

using the [INPUT SELECT] switch on this unit’s front panel.

7 SIGNAL GND terminal

Connects an analog player’s ground wire here. This helps reduce

noise when the analog player is connected.

8 MIC1 terminal

Connects a microphone here.

9 Kensington security slot

USB terminal

Connect to a computer.

b STANDBY/ON switch

This switches this unit’s power between on and standby.

c DC IN terminal

Connect to a power outlet using the included AC adapter (with the

power plug mounted).

d Cord hook

Catch the AC adapter’s power cord and USB cable on this hook

when using this unit.

Front panel

12 53 4 34

1 PHONES jacks

Connect headphones here.

Both stereo phone plugs (Ø 6.3 mm) and stereo mini phone plugs

(Ø 3.5 mm) can be used.

2 HEADPHONES LEVEL control

Adjusts the audio level output from the [PHONES] jack.

3 INPUT SELECT switch

Selects the input source of each channel from the components con-

nected to this unit.

— [PC]: Select this to use the track loaded in the Serato DJ soft-

ware’s deck.

— [MIC1] or [MIC2]: Select one of these to use the microphone con-

nected to the [MIC1] or [MIC2] terminal.

— [CD]: Select this to use a line level output device (DJ player, etc.)

connected to the [CD] terminals.

4 INPUT SELECT switch

Selects the input source of each channel from the components con-

nected to this unit.

— [PC]: Select this to use the track loaded in the Serato DJ soft-

ware’s deck.

— [PHONO]: Select this to use a phono level (for MM cartridges)

output device (analog player, etc.) connected to the [PHONO/

LINE] input terminals.

— [LINE]: Select this to use a line level output device (DJ player,

etc.) connected to the [PHONO/LINE] input terminals.

5 CROSS FADER CURVE selector switch

This switches the crossfader curve characteristics.

Operation

! Wait until all connections between devices have been completed

before connecting the AC adapter.

Be sure to turn off the power and unplug the AC adapter from the

power outlet before making or changing connections between

devices.

Refer to the operating instructions for the component to be

connected.

! Only use the AC adapter included with this unit.

! Power is supplied to this unit by the AC adapter.

! Connect this unit and the computer directly using the included USB

cable.

! A USB hub cannot be used.

Connections

1 Connect headphones to one of the [PHONES]

terminals.

CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER

SLOT

SAVE

START

FLIP

REC

LOOP ON/OFF

4 BEAT

CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER

4 BEAT

SLOT

SAVE

START

FLIP

REC

LOOP ON/OFF

INST.DOUBLES INST.DOUBLES I NST.DOUBLESINST.DOUBLES

SYNC OFF SYNC OFF

2 Connect powered speakers, a power amplifier,

components, etc., to the [MASTER OUT 1] or [MASTER

OUT 2] terminals.

CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER

SLOT

SAVE

START

FLIP

REC

LOOP ON/OFF

4 BEAT

CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER

4 BEAT

SLOT

SAVE

START

FLIP

REC

LOOP ON/OFF

INST.DOUBLES INST.DOUBLES INST. DOUBLESINST.DOUBLES

SYNC OFF SYNC OFF

Powered speakers, etc.

! To output the sound from the [BOOTH OUT] terminals, connect

speakers or other devices to the [BOOTH OUT] terminals.

! For details on connecting the input/output terminals, see the

Operating Instructions.

3 Connect this unit to your computer via a USB cable.

CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER

SLOT

SAVE

START

FLIP

REC

LOOP ON/OFF

4 BEAT

CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER

4 BEAT

SLOT

SAVE

START

FLIP

REC

LOOP ON/OFF

INST.DOUBLES INST.DOUBLES I NST.DOUBLESINST.DOUBLES

SYNC OFF SYNC OFF

USB cable

(included)

4 Turn on the computer’s power.

5 Connect the power plug to the AC adapter.

Slide the power plug into the AC adapter’s guide rails as shown on the

diagram and press in until a click is heard.

! For detailed cautions on the AC adapter, see “About the AC

adapter” (p. 13 ).

! The shape of the plug differs according to the region in which the

unit is sold.

6 Connect the AC adapter.

CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER

SLOT

SAVE

START

FLIP

REC

LOOP ON/OFF

4 BEAT

CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER

4 BEAT

SLOT

SAVE

START

FLIP

REC

LOOP ON/OFF

INST.DOUBLES INST.DOUBLES INST.DOUBLESINST.DOUBLES

SYNC OFF SYNC OFF

AC adapter

(included)

To power outlet

7 Press the [STANDBY/ON] switch on this unit’s rear

panel to turn this unit’s power on.

CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER

SLOT

SAVE

START

FLIP

REC

LOOP ON/OFF

4 BEAT

CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER

4 BEAT

SLOT

SAVE

START

FLIP

REC

LOOP ON/OFF

INST.DOUBLES INST.DOUBLES I NST.DOUBLESINST.DOUBLES

SYNC OFF SYNC OFF

Turn on the power of this unit.

! For Windows users

The message [Installing device driver software] may appear

when this unit is first connected to the computer or when it is

connected to a different USB port on the computer. Wait a while

until the message [Your devices are ready for use] appears.

8 Turn on the power of the devices connected to the

output terminals (powered speakers, power amplifier,

components, etc.).

! When a microphone, DJ player or other external device is con-

nected to input terminals, the power of that device also turns on.

English

Starting the system

Launching Serato DJ

This manual consists mainly of explanations of functions of this unit as hardware. For detailed instructions on operating the Serato DJ software, see

the Serato DJ software manual.

For Windows 7

From the Windows [Start] menu, click the [Serato DJ] icon under [All Programs] > [Serato] > [Serato DJ].

For Windows 8.1

From [Apps view], click the [Serato DJ] icon.

For Mac OS X

In Finder, open the [Applications] folder, then click the [Serato DJ] icon.

Computer screen directly after the Serato DJ software is launched

A A

1 The [BUY/ACTIVATE] icon may appear on the right side of the screen displayed when Serato DJ is launched for the first time, but for those using

DDJ-SX2 there is no need to activate or purchase a license. You can purchase extended packs such as DVS and use them as additional options.

2 Click [Online] to use the unit as is.

Computer screen when a track is loaded in the Serato DJ software

Click [Library] at the upper left of the computer screen, then select [Vertical] or [Horizontal] from the pull-down menu to switch the Serato DJ screen.

A Deck section

The track information (the name of the loaded track, artist name, BPM, etc.), the overall waveform and other information is displayed here.

B Waveform display

The loaded track’s waveform is displayed here.

C Browser section

Crates in which tracks in the library or sets of multiple tracks are stored are displayed here.

Importing tracks

The following describes the typical procedure for importing tracks.

! There are various ways to import tracks with the Serato DJ software.

For details, see the Serato DJ software manual.

! If you are already using Serato DJ software (Scratch Live, ITCH or

Serato DJ Intro) and have already created track libraries, the track

libraries you have previously created can be used as such.

! If you are using Serato DJ Intro and have already created track librar-

ies, you may have to reanalyze the tracks.

1 Click the [Files] key on the Serato DJ software screen

to open the [Files] panel.

The contents of your computer or the peripheral connected to the com-

puter are displayed in the [Files] panel.

2 Click the folder on the [Files] panel containing the

tracks you want to add to the library to select it.

3 On the Serato DJ software screen, drag and drop the

selected folder to the crates panel.

A crate is created and the tracks are added to the library.

a [Files] panel

b Crates panel

Loading tracks and playing them

The following describes the procedure for loading tracks into deck [1] as

an example.

CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER

SLOT

SAVE

START

FLIP

REC

LOOP ON/OFF

4 BEAT

CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER

4 BEAT

SLOT

SAVE

START

FLIP

REC

LOOP ON/OFF

INST.DOUBLES INST.DOUBLES INST. DOUBLESINST.DOUBLES

SYNC OFF SYNC OFF

INST. DOUBLES INST. DOUBLES

1 Rotary selector

2 BACK button

3 LOAD button

1 Press this unit’s [BACK] button, move the cursor to

the crates panel on the computer’s screen, then turn the

rotary selector to select the crate, etc.

2 Press the rotary selector, move the cursor to the

library on the computer’s screen, then turn the rotary

selector and select the track.

a Library

b Crates panel

3 Press the [LOAD] button to load the selected track

onto the deck.

Playing tracks and outputting the sound

The following describes the procedure for outputting the channel 1

sound as an example.

! Set the volume of the devices (power amplifier, powered speakers,

etc.) connected to the [MASTER OUT 1] and [MASTER OUT 2]

terminals to an appropriate level. Note that loud sound will be output

if the volume is set too high.

INST. DOUBLES INST. DOUBLES INST. DOUBLESINST. DOUBLES

f hg

4 TRIM control

5 EQ (HI, MID, LOW) controls

6 FILTER control

7 Headphones CUE button

English

8 Channel fader

9 Crossfader Assign Switch

a MASTER LEVEL control

b BOOTH MONITOR LEVEL control

c HEADPHONES MIX control

d MASTER CUE button

e Crossfader

f HEADPHONES LEVEL control

g INPUT SELECT switch

h CROSS FADER CURVE selector switch

Set the positions of the controls, etc., as shown below.

Names of controls, etc. Position

MASTER LEVEL control Turned fully counterclockwise

TRIM control Turned fully counterclockwise

EQ (HI, MID, LOW) controls Center

FILTER control Center

Channel fader Moved forward

Crossfader Assign Switch [THRU] position

INPUT SELECT switch [PC] position

2 Press the [f] button to play the track.

CUE LOOP SAVED LOOP SLICER LOOP VELOCITY SAMPLER

SLOT

SAVE

START

FLIP

REC

LOOP ON/OFF

4 BEAT

CUE

INST.DOUBLES INST.DOUBLES INST. DOUBLESINST.DOUBLES

SYNC OFF SYNC OFF

3 Move the channel fader away from you.

4 Turn the [TRIM] control.

Adjust [TRIM] so that the orange indicator on the channel level indicator

lights at the peak level.

5 Turn the [MASTER LEVEL] control to adjust the audio

level of the speakers.

Adjust the sound level output from the [MASTER OUT 1] and [MASTER

OUT 2] terminals to an appropriate level.

Monitoring sound with headphones

Set the positions of the controls, etc., as shown below.

Names of controls, etc. Position

HEADPHONES MIX control Center

HEADPHONES LEVEL control Turned fully counterclockwise

1 Press the headphones [CUE] button for the channel 1.

2 Turn the [HEADPHONES LEVEL] control.

Adjust the sound level output from the headphones to an appropriate

level.

Note

This unit and the Serato DJ software include a variety of functions

enabling individualistic DJ performances. For details on the respective

functions, see the operating instructions and the Serato DJ software

manual.

! This unit’s operating instructions can be downloaded from the

Pioneer DJ support site. For details, see Acquiring this unit’s

Operating Instructions (p. 3 ).

The Serato DJ software manual can be downloaded from “Serato.com”.

For details, see Downloading the Serato DJ software manual (p. 3 ).

Quitting the system

1 Quit Serato DJ.

When the software is closed, a message for confirming that you want to

close it appears on the computer’s screen. Click [Yes] to close.

2 Press the [STANDBY/ON] switch on this unit’s rear

panel to set this unit’s power to standby.

3 Disconnect the USB cable from your computer.

About the AC adapter

Safety instructions

To ensure your personal safety and to maximize the full operating poten-

tial of your unit, read and follow these safety instructions.

Read & Retain Instructions

Read all operating and user information provided with this product.

Cleaning

Use a damp cloth to clean the exterior housing. Avoid using any fluids

including liquid, aerosol or alcohol-based cleaning products.

Water or Moisture

Avoid operating or locating this product near water or other sources of

fluid.

Accessories

Do not place this product on an unstable cart, stand, or table. The prod-

uct may fall and be seriously damaged.

Ventilation

Do not block or cover this product in use. This unit should not be placed

in a built-in installation unless properly ventilated.

Environment

Avoid placing this product in a location with exposure to large quantities

of dust, high temperatures, high humidity, or subject to excessive vibra-

tions or shocks.

Power Sources

Operate this product only from the recommended power sources. If

you are unsure of the power source, consult an authorized Pioneer

representative.

Power-Cord Protection

When unplugging the unit, pull on the plug – not on the cord. Do not

handle the cord or plug with wet hands; doing so could cause an electric

short or shock. Do not allow anything to pinch or rest on the power cord

and do not place in a walkway.

Power

Turn OFF the system before installing this or any other hardware device.

Overloading

Avoid connecting too many devices to a single wall socket or power

source as this can cause fires or short circuits.

Object & Liquid Entry

Never push inappropriate objects in to the device. Avoid spilling any

liquids in to or on the outside of the drive.

Servicing

Opening or removing the cover exposes you to possible electrical shock

or other danger. Contact a Pioneer authorized service representative for

repairing this product (refer to the enclosed Service & Support Card).

Damage Requiring Service

Unplug the unit and refer servicing to qualified service personnel in the

following situations:

% When the power cord, plug, or chassis is damaged.

% If liquid has been spilled, or objects have fallen into the product.

% If the product has been exposed to rain or water.

% If the product does not operate normally when the operating instruc-

tions are followed. Adjust only those controls that are covered by the

operating instructions. Improper adjustment of other controls may

result in damage and can require extensive work by a qualified tech-

nician to restore the unit to its normal operation.

% When the product exhibits a distinct change in performance – this

indicates a need for service.

Check that there are no irregularities with the AC adapter or power plug,

then insert the power plug into the specified position of the AC adapter

using the specified procedure until a click is heard. For details, see

Mounting the power plug on page 14 .

If there are irregularities with the AC adapter or power plug, ask your

nearest Pioneer authorized service center or your dealer to carry out

repair work.

! Do not use this unit with a coin, paper clip or other metal object

stuck between the AC adapter and power plug. Doing so could cause

a short circuit, leading to fire or electric shock.

! When mounting the AC adapter on a wall outlet, make sure there is

no space between the AC adapter and the wall outlet. Faulty contact

or a coin, paper clip or other metal object getting stuck in the space

could cause a short circuit, leading to fire or electric shock.

Coin, paper clip or other metal object

Top

Side

! The power plug could come detached from the AC adapter and

remain in the power outlet if someone trips on the AC adapter’s

power cord or if something hits the AC adapter. If this happens,

remove the power plug remaining in the outlet with dry hands, hold-

ing it as shown on the diagram below and without touching metal

parts. Do not use any tools to remove it.

Do not touch.

Mounting the power plug

Slide the power plug along the guide rails in the AC

adapter unit as shown on the diagram below, then press

in until a click is heard.

 Removing the power plug

While pressing the [PUSH] button on the AC adapter

unit, slide the power plug away from the adapter as

shown on the diagram below to remove it.

Once the power plug is mounted, there is no need to remove it.

English

 Power plug

This product comes with the types of power plugs shown below. Use the

appropriate power plug for the country or region you are in.

Type 1 (for Japan, Mexico, and other areas where the

Type 1 plug is used)

Type 2

Type 3 (for Hong Kong, Malaysia, Singapore, and other

areas where the Type 3 plug is used)

Type 4 (for Australia, New Zealand, and other areas

where the Type 4 plug is used)

Type 5 (for Thailand, South Korea, and other areas

where the Type 5 plug is used)

Additional information

Changing the settings

! This unit allows you to adjust the sensitivity of the jog dial and restrict

operation of the [NEEDLE SEARCH] pad.

For details on how to change settings on this unit, see the “Changing

the settings” section in the Operating Instructions, which can be

downloaded from the Pioneer DJ support site.

Troubleshooting

! Incorrect operation is often mistaken for trouble or malfunction. If

you think that there is something wrong with this component, check

the items in the “Troubleshooting” section of this unit’s operating

instructions and the [FAQ] for the [DDJ-SX2] on the Pioneer DJ sup-

port site.

http://pioneerdj.com/support/

Sometimes the problem may lie in another component. Inspect the

other components and electrical appliances being used. If the prob-

lem cannot be rectified, ask your nearest Pioneer authorized service

center or your dealer to carry out repair work.

! This unit may not operate properly due to static electricity or other

external influences. In this case, proper operation may be restored by

turning the power off, waiting 1 minute, then turning the power back

on.

About trademarks and registered

trademarks

! Pioneer is a registered trademark of PIONEER CORPORATION.

The names of companies and products mentioned herein are the trade-

marks of their respective owners.

Cautions on copyrights

Recordings you have made are for your personal enjoyment and accord-

ing to copyright laws may not be used without the consent of the copy-

right holder.

! Music recorded from CDs, etc., is protected by the copyright laws of

individual countries and by international treaties. It is the full respon-

sibility of the person who has recorded the music to ensure that it is

used legally.

! When handling music downloaded from the Internet, etc., it is the

full responsibility of the person who has downloaded the music to

ensure that it is used in accordance with the contract concluded

with the download site.

Specifications

AC adapter

Power ............................................................ AC 100 V to 240 V, 50 Hz/60 Hz

Rated current .....................................................................................800 mA

Rated output ................................................................................. DC 5 V, 3 A

General – Main Unit

Main unit weight ...................................................................................5.8 kg

Max. external dimensions

.............................. 664 mm (width) x 70.4 mm (height) x 353.4 mm (depth)

Tolerable operating temperature ........................................+5 °C to +35 °C

Tolerable operating humidity ...................... 5 % to 85 % (no condensation)

Audio Section

Sampling rate ....................................................................................44.1 kHz

A/D, D/A converter ............................................................................... 24 bits

Frequency characteristic

USB, CD/LINE, MIC1, MIC2 ............................................ 20 Hz to 20 kHz

S/N ratio (rated output, A-WEIGHTED)

USB ................................................................................................ 107 dB

CD/LINE ........................................................................................... 96 dB

PHONO ............................................................................................ 87 dB

MIC .................................................................................................. 80 dB

Total harmonic distortion (20 Hz — 20 kHzBW)

USB ...............................................................................................0.003 %

CD/LINE ........................................................................................ 0.005 %

Standard input level / Input impedance

CD/LINE ............................................................................ –12 dBu/47 kW

PHONO ............................................................................. –52 dBu/47 kW

MIC .....................................................................................–57 dBu/3 kW

Standard output level / Load impedance / Output impedance

MASTER OUT 1 .....................................................+6 dBu/10 kW/330 W

MASTER OUT 2 ....................................................... +2 dBu/10 kW/1 kW

BOOTH OUT ...........................................................+6 dBu/10 kW/330 W

PHONE .......................................................................+4 dBu/32 W/32 W

Rated output level / Load impedance

MASTER OUT 1 ................................................................. 24 dBu/10 kW

MASTER OUT 2 ................................................................. 20 dBu/10 kW

BOOTH OUT ...................................................................... 24 dBu/10 kW

Crosstalk

CD/LINE ........................................................................................... 82 dB

Channel equalizer characteristic

HI .....................................................................–26 dB to +6 dB (13 kHz)

MID ....................................................................–26 dB to +6 dB (1 kHz)

LOW ...................................................................–26 dB to +6 dB (70 Hz)

Input / Output terminals

CD input terminal

RCA pin jack ....................................................................................2 sets

PHONO/LINE input terminals

RCA pin jack ....................................................................................2 sets

MIC1 terminal

XLR connector/phone jack (Ø 6.3 mm) ...........................................1 set

MIC2 terminal

Phone jack (Ø 6.3 mm) ..................................................................... 1 set

MASTER OUT 1 output terminal

XLR connector...................................................................................1 set

MASTER OUT 2 output terminal

RCA pin jacks ....................................................................................1 set

BOOTH OUT output terminal

Phone jack (Ø 6.3 mm) ..................................................................... 1 set

PHONES output terminal

Stereo phone jack (Ø 6.3 mm) .........................................................1 set

Stereo mini phone jack (Ø 3.5 mm) ................................................. 1 set

USB terminal

B type ................................................................................................. 1 set

! For improvement purposes, specifications and design of this unit

and the included software are subject to change without notice.

PRECAUCI

RA PREVENIR EL PELIGRO DE CHOQUE ELÉCTRICO

NO REMOVER

LA TAPA NI LAS PARTES DENTRO NO

UTILIZADAS, LL

AMAR UNA PERSONA CUALIFICADA.

D3-4-2-1-1_B2_Es

ADVER

TENCIA

Este aparato no es impermeable.

Para evitar el riesgo

de incendio y de descargas eléctricas, no ponga ningún

recipiente lleno de líquido (como pueda ser un vaso o

un florero) cerca del aparato ni lo exponga a gote

salpicaduras, lluvia o humedad

D3-4-2-1-3_A1_Es

ADVER

TENCIA

ra evitar el peligro de incendio, no ponga nada con

fuego encendido (como pueda ser una vela) encima del

aparat

D3-4-2-1-7a_A1_Es

Entor

no de funcionamiento

mperatura y humedad del entorno de funcionamiento

+5 °C a +35 °C; menos del 85 % de humedad relativa

(rejillas de refrigeración no obstruidas

)

No instale este aparato en un lugar mal ventilado

, ni en

lugares expuestos a alta humedad o a la luz directa del

sol (o de otra luz artificial potente).

D3-4-2-1-7c*_A1_Es

PRECAUCIÓN

El interruptor de la alimentación STANDBY/ON de

este aparato no corta por completo toda la

alimentación de la toma de corriente de CA. Puesto

que el cable de alimentación hace las funciones de

dispositivo de desconexión de la corriente para el

aparato, para desconectar toda la alimentación del

aparato deberá desenchufar el cable de la toma de

corriente de CA. Por lo tanto, asegúrese de instalar

el aparato de modo que el cable de alimentación

pueda desenchufarse con facilidad de la toma de

corriente de CA en caso de un accidente. Para evitar

correr el peligro de incendio, el cable de

alimentación también deberá desenchufarse de la

toma de corriente de CA cuando no se tenga la

intención de utilizarlo durante mucho tiempo

seguido (por ejemplo, antes de irse de vacaciones).

D3-4-2-2-2a*_A1_Es

Cuando utilice este producto, confirme la

información de seguridad mostrada en la parte

inferior de la unidad.

D3-4-2-2-4_B1_Es

Este producto es para tareas domésticas generales.

Cualquiera avería debida a otra utilización que tareas

domésticas (tales como el uso a largo plazo para

motivos de negocios en un restaurante o el uso en un

coche o un barco) y que necesita una reparación

hará que cobrarla incluso durante el período de

garantía.

K041_A1_Es

PRECAUCIONES CONCERNIENTES A LA

MANIPULACIÓN DEL CABLE DE

ALIMENT

ACIÓN

me el cable de alimentación por la clavija. No

extraiga la clavija tirando del cable. Nunca toque el

cable de alimentación cuando sus manos estén

mojadas, ya que esto podría causar cortocircuitos o

descargas eléctricas. No coloque la unidad, algún

mueble, etc., sobre el cable de alimentación

Asegúrese de no hacer nudos en el cable ni de unirlo a

otros cables. Los cables de alimentación deberán ser

dispuestos de tal forma que la probabilidad de que

sean pisados sea mínima. Una cable de alimentación

dañado podrá causar incendios o descargas eléctricas.

vise el cable de alimentación está dañado, solicite el

reemplazo del mismo al centro de se

rvicio autorizado

PIONEER más cercan

o, o a su distribuidor.

S002*_A1_Es

Español

Antes de empezar a usar la unidad

Cómo leer este manual

! Gracias por haber adquirido este producto Pioneer.

¡Asegúrese de leer este folleto y el manual de instrucciones! Ambos

documentos incluyen información importante que usted deberá

entender antes de usar este producto.

Después de haber terminado de leer estas instrucciones, guárdelas

en un lugar seguro para, en caso de ser necesario, consultarlas en el

futuro.

— Para las instrucciones sobre cómo adquirir el manual de instruc-

ciones, vea Adquisición del manual (página 3 ).

! En este manual, los nombres de las pantallas y de los menús mostra-

dos en el producto y en la pantalla del ordenador, así como también

los nombres de los botones, de los terminales, etc., se indican entre

paréntesis. (Ejemplo: Botón [CUE], panel [Files], terminal [MIC1])

! Note que las pantallas y las especificaciones del software descritas

en este manual, así como también la apariencia externa y las espe-

cificaciones del hardware, están actualmente en fase de desarrollo y

pueden ser distintas de las especificaciones finales.

! Note que dependiendo de la versión del sistema operativo, los ajus-

tes del navegador web, etc., la operación puede que sea distinta de

los procedimientos descritos en este manual.

Contenido de la caja

! Adaptador de CA

! Clavija de alimentación

! Cable USB

! Garantía (para algunas regiones)

! Manual de instrucciones (Guía de inicio rápido) (este documento)

! Serato DJ EXPANSION PACK VOUCHER

1 Para la región japonesa, la información correspondiente se provee

en la contracubierta del “Manual de instrucciones (Guía de inicio

rápido)”.

2 Observe que el Serato DJ EXPANSION PACK VOUCHER no puede

volver a emitirse. Deberá utilizar el código de cupón para activar el

paquete de expansión. Asegúrese de guardarlo en un lugar seguro

de modo que no lo pueda perder.

Adquisición del manual

Las diversas instrucciones se proveen algunas veces como archivos

en formato PDF. Para ver archivos en formato PDF, deberá instalarse

Adobe

Reader

Adquisición del Manual de instrucciones

de esta unidad

1 Inicie un navegador de Web en el ordenador y acceda

al sitio de asistencia Pioneer DJ de abajo.

http://pioneerdj.com/support/

2 En el sitio de asistencia Pioneer DJ, haga clic en

[Manuals] bajo [DDJ-SX2].

3 Haga clic en el idioma necesario de la página de

descarga.

La descarga del manual de instrucciones empieza.

Descarga del manual del software Serato DJ

1 Inicie un navegador de Web en el ordenador y acceda

al sitio de asistencia Pioneer DJ de abajo.

http://pioneerdj.com/support/

2 Haga clic en [Software Info] bajo [DDJ-SX2] en el sitio

de asistencia Pioneer DJ.

3 Haga clic en el icono Serato DJ y luego en el enlace

con la página de descarga Serato DJ.

La página de descarga de Serato DJ se visualiza.

4 Entre en su cuenta de usuario “Serato.com”.

Introduzca la dirección de correo electrónico y la contraseña que ha

registrado para entrar en “Serato.com”.

5 Desde “More Downloads”, en el lado derecho

de la página de descarga, haga clic en el manual

correspondiente.

La descarga del manual del software Serato DJ empieza.

Instalación del software

Antes de instalar el software

No se incluye el software Serato DJ y el software controlador.

Acceda al software y descárguelo desde el sitio de asistencia de

Pioneer DJ.

http://pioneerdj.com/support/

! El usuario es responsable de preparar el ordenador, los aparatos

de la red y otros elementos que se usan en el ambiente de Internet

y que son necesarios para conectar a Internet.

Acerca del software controlador

(Windows)

Este software controlador es un controlador ASIO exclusivo que se usa

para enviar señales de audio desde el ordenador.

! Cuando se usa Mac OS X no es necesario instalar el software

controlador.

 Obtención del software controlador

1 Inicie un navegador de Web en el ordenador y acceda

al sitio de asistencia Pioneer DJ de abajo.

http://pioneerdj.com/support/

2 Haga clic en [Software Download] bajo [DDJ-SX2] en

el sitio de asistencia Pioneer DJ.

3 Haga clic en el icono del software controlador para

descargar el software controlador desde la página de

descarga.

Acerca del software Serato DJ

Serato DJ es una aplicación de software DJ de Serato. Las actuaciones

de DJ son posibles conectando a esta unidad el ordenador en el que

está instalado este software.

Ambiente de operación mínimo

Sistemas operativos

compatibles

CPU y memoria necesaria

Mac OS X: 10.9, 10.8

y 10.7

versión de

32 bits

Procesador Intel

Core™ i3, i5 e i7

1,07 GHz o suprior, procesador Intel

Core™ 2 Duo 2,0 GHz o superior

RAM de 2 GB o más

versión de

64 bits

Procesador Intel

Core™ i3, i5 e i7

1,07 GHz o suprior, procesador Intel

Core™ 2 Duo 2,4 GHz o superior

RAM de 4 GB o más

Sistemas operativos

compatibles

CPU y memoria necesaria

Windows: Windows 8,1 y

Windows 7

versión de

32 bits

Procesador Intel

Core™ i3, i5 e i7

1,07 GHz o suprior, procesador Intel

Core™ 2 Duo 2,0 GHz o superior

RAM de 2 GB o más

versión de

64 bits

Procesador Intel

Core™ i3, i5 e i7

1,07 GHz o suprior, procesador Intel

Core™ 2 Duo 2,4 GHz o superior

RAM de 4 GB o más

Otros

Puerto USB

Para conectar el ordenador con esta unidad se

requiere un puerto USB 2.0.

Resolución de la

pantalla

Resolución de 1 280 x 720 o más

Conexión a Internet

Para registrar la cuenta del usuario “Serato.com” y des-

cargar el software se necesita una conexión a Internet.

! Para obtener información sobre los requisitos más actuales del sistema, la

compatibilidad y los sistemas operativos compatibles, vea “Software Info” de

“DDJ-SX2” en el sitio de asistencia de Pioneer DJ siguiente.

http://pioneerdj.com/support/

! La operación no se garantiza en todos los ordenadores, aunque se cumplan

todas las condiciones indicadas aquí para el ambiente de operación necesario.

! Dependiendo de la configuración de ahorro de energía del ordenador, etc., la

CPU y el disco duro pueden no proveer la capacidad de procesamiento sufi-

ciente. Para los ordenadores portátiles en particular, asegúrese de que estén en

condiciones apropiadas para ofrecer un alto rendimiento constante (por ejem-

plo, manteniendo la alimentación de CA conectada) cuando se usa Serato DJ.

! Para usar Internet se necesita firmar un contrato separado con un proveedor

que ofrezca servicios de Internet y pagar los honorarios de dicho proveedor.

! La asistencia del sistema operativo asume que usted está usando el parche de

seguridad más reciente para esa versión.

 Obtención del software Serato DJ

1 Inicie un navegador de Web en el ordenador y acceda

al sitio de asistencia Pioneer DJ de abajo.

http://pioneerdj.com/support/

2 Haga clic en [Software Download] bajo [DDJ-SX2] en

el sitio de asistencia Pioneer DJ.

3 Haga clic en el icono Serato DJ y luego en el enlace

con la página de descarga Serato DJ.

La página de descarga de Serato DJ se visualiza.

4 Entre en su cuenta de usuario “Serato.com”.

! Si ya ha registrado una cuenta de usuario en “Serato.com”, vaya

al paso 6.

! Si no ha completado el registro de su cuenta de usuario, hágalo

siguiendo el procedimiento de abajo.

— Siguiendo las instrucciones de la pantalla, introduzca su

dirección de correo electrónico y contraseña que quiera

establecer y luego seleccione la región donde vive.

— Si marca [E-mail me Serato newsletters] se le enviarán

desde Serato boletines con la información más reciente de

los productos Serato.

— Una vez completado el registro de la cuenta del usuario,

usted recibirá un correo electrónico en la dirección de correo

electrónico que haya introducido. Verifique el contenido del

correo electrónico enviado desde “Serato.com”.

! Tenga cuidado para no olvidar la dirección de correo electrónico

y la contraseña especificadas al hacer el registro del usuario.

Éstas serán necesarias para actualizar el software.

! La información personal introducida al registrar una cuenta de

usuario nueva puede recopilarse, procesarse y usarse basándose

en la política de privacidad del sitio Web de Serato.

5 Haga clic en el vínculo en el mensaje de correo

electrónico enviado desde “Serato.com”.

Esto le lleva a la página de descarga Serato DJ. Vaya al paso 7.

6 Inicie la sesión.

Introduzca la dirección de correo electrónico y la contraseña que ha

registrado para entrar en “Serato.com”.

7 Descargue el software Serato DJ desde la página de

descarga.

Acerca del procedimiento de instalación

El procedimiento de instalación depende del sistema operativo (OS) del

ordenador que está usando.

Para Windows

Después de instalar el software controlador, instale el software Serato

DJ.

Para Mac OS X

Instale solo el software Serato DJ.

 Procedimiento de instalación (Windows)

No conecte esta unidad y el ordenador hasta completar la instalación.

! Inicie la sesión como el usuario que fue establecido como adminis-

trador del ordenador antes de hacer la instalación.

! Si está ejecutándose cualquier otro programa en el ordenador,

abandónelo.

1 Haga doble clic en el software controlador

descargado (Pioneer_DDJ_SX2_Driver_x.xxx.exe).

2 Siga con la instalación según las instrucciones de la

pantalla.

Si aparece [Seguridad de Windows] en la pantalla mientras se realiza

la instalación, haga clic en [Instalar este software de controlador de

todas formas] y continúe con la instalación.

Cuando termina la instalación del programa aparece un mensaje de

terminación.

Después de instalar el software controlador, instale el software Serato

DJ.

3 Descomprima el archivo de software Serato DJ

descargado.

4 Haga doble clic en el archivo de software

descomprimido para ejecutar el instalador.

5 Lea con cuidado los términos del acuerdo de licencia

y, si está de acuerdo, seleccione [I agree to the license

terms and conditions] y luego haga clic en [Install].

! Si no acepta el contenido del acuerdo de uso, haga clic en

[Close] para cancelar la instalación.

La instalación empieza.

El mensaje de instalación satisfactoria aparece una vez terminada la

instalación.

ページを読み込んでいます...

Pioneer DDJ-SX2 クイックスタートガイド

関連論文

その他の書類