Erica Synths Sample Drum ユーザーマニュアル

タイプ
ユーザーマニュアル
D/BACK E F
A/DATA B C
TRG1
PLAY
TRG2 SHIFT
TRIG 1 CV1
TRIG 2 CV1
CV2
CV2CV3
CV3OUT 1
OUT 2
SD
1/2
SAMPLE DRU
FEATURES
SPECIFICATIONS
1
2
3
4
5
6
7 8 9
6
9
5
4
3
1
2
7
8
HO
IT ORKS?
SAMPLE DRU
LIBRARY MENU SAMPLE LOADING
SAMPLE MENU – WORKING WITH THE SAMPLES
SAMPLE MENU – AUTOMATIC SAMPLE SLICING
SAMPLE DRU
SAMPLE MENU – MANUAL SAMPLE SLICING
SAMPLE DRU
SAMPLE RECORD MENU – SAMPLING
SAMPLE DRU
Push the TRG1/PLAY button to listen to the sample! You can preview samples on both SD
card and RAM side – the module will preview the last selected sample – use A/DATA and C
encoders to navigate through the list of samples. Push TRG2/SHIFT to preview the sample
waveform, size and length!
SAMPLE DRU
FX MENU – EFFECTS
AMPLITUDE menu – ENVELOPES
Rotate the encoder C to select slicing mode (SMODE). Available modes for automatic slicing are:
Linear (LIN in the screen on the left) – the sample is sliced in defined number of equally long
slices
Zero Crossing (ZC, for example) – the sample is sliced in defined number of slices, but the slices
are locates as close as possible to zero crossing points. This slicing mode will minimize clicks
when advancing from slice to slice. All trough to get 100% perfect slicing you will need to edit slice
points manually.
SAMPLE DRU
CV ASSIGN MENU – CV MAPPING
Rotate the encoder E to move slicing cursor left or right and push the encoder A/DATA (ADD)
to add the slice point! Maximum number of slices per sample is 32. Slice points will be
automatically numbered sequentially.
Rotate the encoder A/DATA to move through the slices. The selected slice will appear as a dashed line.
Once the slice is selected you can adjust its position (move left or right) by rotating the encoder
B or you can REMOVE the slice point by pushing the encoder C.
Push the encoder D/BACK to return to the main slicing screen.
SAMPLE DRU
Once RANGE, LEVEL, and THRESHOLD settings are done, push the encoder A/DATA (REC) to
start recording. Record timer will indicate the sampling time and level bar will give visual
feedback on audio input level.
You may want to monitor the recording. In order to do so, push the encoder C, and MON menu
will become active.
To stop recording push the encoder A/DATA again. As soon recording is stopped, the module
Will advance to the sample trim and save mode.
SAMPLE DRU
PERFORMANCE MENU LIVE PERFORMANCE INTERFACE
SAMPLE DRU
PROJECTS MENU SAVING PERFORMANCE SETTINGS
GENERAL
SAMPLE DRU
SETTINGS MENU MAIN SYSTEM AND USER SETTINGS
SAMPLE DRU
FIRARE
UPDATE
SAFETY
INSTRUCTIONS
!
!!!"#$%&'()*+,("-.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Erica Synths Sample Drum ユーザーマニュアル

タイプ
ユーザーマニュアル