Steinberg HALion 4.0 ユーザーガイド

カテゴリー
ソフトウェア
タイプ
ユーザーガイド
Operation Manual
Benutzerhandbuch
Mode d’Emploi
English
Matthias Klag, Michael Ruf
Revision and quality control: Cristina Bachmann, Heiko Bischoff, Marion Bröer, Sabine Pfeifer,
Heike
Schilling, Benjamin Schütte
This PDF provides improved access for vision-impaired users. Please note that due to the complexity
and number of images in this document, it is not possible to include text descriptions of images.
The information in this document is subject to change without notice and does not represent a com-
mitment on the part of Steinberg Media Technologies GmbH. The software described by this docu-
ment is subject to a License Agreement and may not be copied to other media except as specifically
allowed in the License Agreement. No part of this publication may be copied, reproduced, or other
-
wise transmitted or recorded, for any purpose, without prior written permission by Steinberg Media
Technologies GmbH. Registered licensees of the product described herein may print one copy of this
document for their personal use.
Steinberg, HALion, VST, and ASIO are registered trademarks of Steinberg Media Technologies
GmbH. Windows
7, Windows Vista and DirectX are registered trademarks of Microsoft Corporation
in the United States and other countries. Macintosh, Mac, Mac OS, and Logic are trademarks of
Apple Inc., registered in the U.S. and other countries. Pentium and Intel Core are trademarks or reg
-
istered trademarks of Intel Corporation in the U.S. and other countries. All other product and company
names are ™ or ® trademarks of their respective holders.
Release Date: November 3, 2011
© Steinberg Media Technologies GmbH, 2011.
All rights reserved.
4
Table of Contents
6 Installation and Setup
6 Welcome
7 Key Command Conventions
7 How You Can Reach Us
7 Installation
9 Setting Up
11 The HALion Control Panel
11 Introduction
11 Configuring the Control Panel
13 Setting the Focus
13 Working with Multiple Windows
14 Screen Sets
15 Overview of the Available Editors
17 Macro Pages
18 Managing Your Sounds
18 The Slot Rack
21 Managing Multis
24 Managing Files via the MediaBay
28 Content Files and Folder Structure
28 Loading HALion 3 Programs
29 Working with General MIDI Files
30 Loading and Managing Programs
30 Introduction
30 The Columns of the Program Table
31 Loading Programs into the Program Table
31 Loading Programs from the Program
Table to the Slot Rack
32 Editing the Program Table
33 Using the Program Tree
33 Introduction
34 The Program Tree Structure
35 Editing Zones, Programs, and Layers
37 Making Selections
38 Navigating in the Program Tree
39 Muting, Soloing, and Hiding
40 Adding MIDI Modules
40 Adding Insert Effects
40 Changing the Order of MIDI Modules and
Insert Effects
41 Adding Audio Busses
41 Customizing the Program Tree
43 Global Functions and Settings
43 Introduction
43 The Plug-in Functions Section
45 The Toolbar
46 The Keyboard Editor
48 The Options Editor
53 Quick Controls
57 AI-Knob Support
58 Common Editing Methods
58 Introduction
58 Using Controls in HALion
59 Using Key Commands
60 Working with Presets
62 Using Automation
62 Using Effects
63 Using MIDI Modules
66 Importing and Exporting Samples
66 Importing Samples
70 Finding Missing Samples
71 Exporting Samples
75 Replacing Samples
77 Importing Third-Party Sampler Programs
77 Importing Sliced Loops
80 Using the Browser
80 Introduction
80 The Path Section
81 The Location Tree
82 The Results List
84 The Preview and File Info Section
84 Loading Files
87 Editing Programs and Layers in the
Sound Editor
87 Introduction
87 The Main Section
88 The Trigger Section
90 The Voice Management Section
94 The Variation Groups Section
95 The Quick Control Assignments Section
95 The Note Expression Section
5
97 Editing Zones in the Sound Editor
97 Introduction
97 Global Zone Settings
98 Editing Selected Zones or All Zones
98 Absolute and Relative Editing
98 HALion 3 compatibility
98 Managing Sections
99 The Voice Control Section
102 The Pitch Section
103 The Oscillator Section
107 The Sample Oscillator Section
109 The AudioWarp Section
112 The Filter Section
116 The Amplifier Section
118 The Envelope Section
123 The LFO Section
126 The Step Modulator Section
129 The Modulation Matrix Section
136 Mapping Zones
136 Introduction
136 The Mapping Editor
137 Setting the Focus
137 Zooming and Scrolling
138 Selecting Zones
138 Moving Zones
138 Setting Key and Velocity Range
139 Muting and Soloing Zones
139 Showing and Hiding Zones
139 Fading and Crossfading Zones
140 The Root Key
140 Triggering Zones
141 Importing Samples Using Drag and Drop
141 Mapping Zones
143 Filling Gaps between Zones
143 Selecting Zones with the Mapping Editor
Keyboard
144 Editing Samples in the Sample
Editor
144 Introduction
144 Overview
145 The Parameter Section
146 General Operations
150 Creating Loops
155 MIDI Editing and Controllers
155 The MIDI Editor
156 Using MIDI Controllers
157 Assigning MIDI Controllers
157 Assigning MIDI Controllers to AUX FX
157 Saving a MIDI Controller Mapping as
Default
158 Automation and Factory MIDI Controller
Assignments
158 CC 121 Support
159 Mixing and Routing
159 The Audio Bus Architecture
162 The HALion Mixer
166 Effects Reference
166 Introduction
166 Reverb and Delay Effects
170 EQ Effects
172 Distortion Effects
173 Modulation Effects
178 Dynamics Effects
182 Panner and Routing Effects
184 HALion 3 Legacy Effects
192 MIDI Modules Reference
192 Introduction
192 The FlexPhraser
197 The Trigger Pads
199 Mono Envelope
201 Mono LFO
203 MegaTrig
207 Layer Alternate
209 Key Switch Alternate
210 Key Switch Remote
211 MIDI Randomizer
212 True Pedaling
213 CC Mapper
214 Velocity Curve
215 Tuning Scale
217 Key Commands Reference
217 The Default Key Commands
219 Using the HALion Standalone
Version
219 Introduction
219 Making Preferences Settings
221 Selecting the MIDI Input and the Audio
Output
221 The Scratch Pad
224 Index
6
Installation and Setup
Welcome
Congratulations and thank you for purchasing Steinberg’s HALion 4.
Ten years after the release of the first version of HALion, Steinberg is very proud to
present the fourth incarnation of its acclaimed VST sampler. When the idea of HALion
was first formed over a decade ago, the approach was to develop a highly user-
friendly, yet powerful software sampler with an unparalleled feature set and a
seamless integration into modern DAWs.
Today, HALion 4 embodies the original philosophy better than ever before. When
comparing HALion 4 with its predecessors, you find many similarities, but the
immense advancements throughout the application stand out a mile. HALion 4 has
undergone a massive overhaul and a shift to an entirely new virtual instrument,
Steinberg’s VST sampler and sound creation system.
For the first time in its history, HALion combines a premium sample engine with a
virtual analog synthesizer and in this way opens the door to new sonic spheres. The
integrated mixing console, the studio-grade effects and the flexible user interface are
just some of the features that will truly inspire your creativity. One of the key objectives
during the development process was to further optimize the workflow concept. When
you get started with HALion 4, you will soon discover the many useful details that help
to turn your vision into reality.
HALion 4 was designed according to the requirements of professional sound
designers and was relentlessly refined during the engineering process, resulting in the
ultimate tool for discerning sound designers as well as finding the appreciation of
musicians, producers, and composers.
First of all, check out the massive sound library. With more than 1,600 instruments
and patches, HALion 4 includes the complete sound collection of the appraised
HALion Sonic workstation alongside many fresh new sounds.
After you have registered HALion 4 online, take some time to explore the community
section at www.steinberg.net/forum. You will find lots of useful information and get to
know other users in our discussion forums. Registering at
www.steinberg.net/mysteinberg also gives you access to special offers from
Steinberg in the future.
Have fun creating your sound. Your way.
The Steinberg HALion Team
7
Installation and Setup
Key Command Conventions
Key Command Conventions
Many of the default key commands in HALion use modifier keys, some of which are
different depending on the operating system. For example, the default key command
for Undo is [Ctrl]-[Z] under Windows and [Command]-[Z] under Mac OS X.
When key commands with modifier keys are described in this manual, they are shown
with the Windows modifier key first:
[Win modifier key]/[Mac modifier key]-[key]
For example, [Ctrl]/[Command]-[Z] means “press [Ctrl] under Windows or
[Command] under Mac OS X, then press [Z]”.
Similarly, [Alt]/[Option]-[X] means “press [Alt] under Windows or [Option] under Mac
OS X, then press [X]”.
Please note that this manual often refers to right-clicking, for example, to open context
menus. If you are using a Mac with a single-button mouse, hold down [Ctrl] and click.
How You Can Reach Us
Clicking the Steinberg logo in the top right corner of HALion opens a pop-up menu
containing items for getting additional information and help:
This menu contains links to various Steinberg web pages. Selecting a link
automatically launches your browser application and opens the page.
On the web pages, you can find support and compatibility information, answers to
frequently asked questions, links for downloading new drivers, etc. This requires
that you have a browser application installed on your computer and a working
internet connection.
When you choose the Help item, an online version of the documentation opens.
You also find a menu item for the registration of your product.
For further information, see “Register Your Software” on page 9.
Installation
The USB-eLicenser
Many Steinberg products, including HALion, use the USB-eLicenser, a hardware
copy protection device. HALion will not run without an eLicenser containing an
activated license.
The USB-eLicenser is a USB device on which your Steinberg software licenses are
stored. All hardware-protected Steinberg products use the same type of device, and
you can store more than one license on one device. Also, licenses can (within certain
limits) be transferred between USB-eLicensers. This is helpful if you want to sell a
piece of software, for example.
!
Please read the following section before installing HALion.
!
The USB-eLicenser is a separate product and is not included in the product package
of HALion.
8
Installation and Setup
Installation
The product package of HALion contains an activation code, which is found on the
Essential Product License Information card within the product package. To make
unlimited use of your version of HALion, you must manually download a license to an
USB-eLicenser connected to your computer, and activate your permanent license
using the activation code.
In the eLicenser Control Center you can activate new licenses and check which
licenses are installed on your USB-eLicenser. After installation of HALion, the
eLicenser Control Center can be opened via the Start menu on Windows systems or
the Applications folder on a Mac.
Ö If you are using other copy-protected Steinberg products, you may want to transfer all
licenses for your applications to one USB-eLicenser, thus using up only one USB port
of your computer. Please refer to the eLicenser Control Center Help for information on
how to transfer licenses between USB-eLicensers.
System Requirements
To use HALion, your computer must meet the following requirements:
Windows
- Windows Vista or Windows 7
- Pentium/Athlon 2.0 GHz dual core CPU
-2 GB RAM
-Approx. 15 GB of free hard disk space
- Display resolution 1280 x 800 pixels recommended
- DirectX compatible audio hardware (ASIO compatible audio hardware
recommended for low-latency performance)
- DVD-ROM drive with dual-layer support
- USB port for USB-eLicenser (license management)
- USB-eLicenser (not included)
- Internet connection for license activation
- For using HALion as a plug-in, a VST2 or VST3 compatible host is required.
Macintosh
- Mac OS X 10.6
-Intel Core Duo 2.0 GHz processor
-2 GB RAM
- Approx. 15 GB of free hard disk space
- Display resolution 1280 x 800 pixels recommended
- CoreAudio compatible audio hardware
- DVD-ROM drive with dual-layer support
- USB port for USB-eLicenser (license management)
- USB-eLicenser (not included)
- Internet connection for license activation
- For using HALion as a plug-in, a VST3 or AU compatible host is required.
Installing HALion
HALion provides a large amount of content and is distributed on a set of two DVDs.
Please have all DVDs ready for the installation.
!
The HALion installer allows you to save the content files on a different hard drive than
the program files.
9
Installation and Setup
Setting Up
Proceed as follows:
1. Insert the first DVD into your DVD drive.
An interactive Start Center appears. If it is does not open automatically or if you
have a Macintosh computer, you can manually open it by double-clicking the file
HALion_Start_Center.exe (Windows) or HALion Start Center.app (Mac).
2. Follow the instructions on screen to start the installation of HALion and browse
through the additional options and information presented.
If you do not want to install HALion via the interactive Start Center, follow the
instructions below:
Windows
1. Double-click the file called “Setup.exe”.
2. Follow the instructions on screen.
Macintosh
1. Double-click the file called “HALion.mpkg”.
2. Follow the instructions on screen.
Register Your Software
We encourage you to register your software! By doing so you are entitled to technical
support and kept aware of updates and other news regarding HALion.
To register HALion, click the Steinberg logo in the top right corner of the control
panel and select “Register HALion now!” from the pop-up menu.
This option opens the registration page of the Steinberg web site in your web
browser. To register, follow the instructions on screen.
Setting Up
The following sections describe how to use HALion as a plug-in in different host
applications. HALion can also be used as a standalone application. This is described
in detail in the chapter
“Using the HALion Standalone Version” on page 219.
Setting Up HALion as a VST Instrument in Cubase
We assume that you have correctly set up Cubase as well as your MIDI and audio
hardware, and that Cubase receives MIDI data from your external MIDI keyboard. If
you want to use HALion in another VST host application, please refer to the
documentation of the corresponding application.
Cubase provides two ways of working with VST instruments: the VST Instruments
window and instrument tracks.
Accessing HALion via the VST Instruments Window
Proceed as follows:
1. Open the Devices menu in Cubase and select the VST Instruments option.
The VST Instruments window opens.
2. Click one of the empty slots to open the instrument pop-up menu, and select
HALion.
You are asked whether you want to create an associated MIDI track connected to
the VST instrument.
3. Click Create.
HALion is loaded and activated, and its control panel opens. A MIDI track called
HALion is added to the track list. The output of this track is routed to HALion.
10
Installation and Setup
Setting Up
Accessing HALion via an Instrument Track
Proceed as follows:
1. On the Project menu, open the Add Track submenu, and select “Instrument”.
The Add Instrument Track dialog opens.
2. On the instrument pop-up menu, select HALion.
3. Click OK to create the instrument track.
4. Click the Edit Instrument button in the Cubase Inspector to open the HALion
control panel.
HALion is now set up as a VST instrument in Cubase. For more details about the
handling of VST instruments, see the Cubase Operation Manual.
Selecting Outputs
HALion loads with a stereo output configuration by default. However, you can use up
to 32 stereo outputs plus one 5.1 output in Cubase. This allows you to route all 64
program slots to a dedicated Cubase Mixer channel.
To make these outputs available, proceed as follows:
1. Open the VST Instruments window.
2. Click the output button for the HALion instrument.
3. Activate the required outputs.
Cubase automatically creates a MIDI track for each additional output and adds a
channel to its Mixer. You can now route HALion programs or layers to these outputs
for further signal processing within Cubase.
Using HALion in an AU Compatible Application
You can use HALion in an AU host application (e. g. Logic). The AU version of HALion
is installed in your AU plug-ins folder and lets HALion work in an AU environment
without any performance loss or incompatibilities.
For Logic Pro, proceed as follows:
1. Open the Track Mixer and select the instrument channel that you want to use.
2. Click in the I/O field, and select the AU Instruments submenu.
3. On the Steinberg submenu, select HALion.
4. Select Multi Output or Stereo from the submenu.
HALion is now loaded as an AU instrument.
11
The HALion Control Panel
Introduction
HALion provides flexible and highly customizable window management. You can
arrange the available editors in the window, structure the window sections using tabs,
and even configure several separate windows for your work. The size of each window,
and window section, is freely adjustable. This allows you to make the most of the
available screen space.
Configuring the Control Panel
You can set up the control panel exactly the way you want it, by determining the
number of different sections (which are referred to as “views” in this document) that
you want the window to contain, and by further configuring these sections, for
example by adding tabs. For each of these elements (views or tabs), you can specify
the editor that is displayed.
All these functions can be performed via the setup options. For views, these can be
accessed via the View pop-up menu. For tabs, they are available on the context menu.
A view
with a
single
editor
A view with
multiple
editors on
different
tabs
12
The HALion Control Panel
Configuring the Control Panel
The following setup options are available:
Select… (Editor)
To select the editor to be displayed, open the Editor submenu, and select the editor or
choose “Select…” to display a pane showing icons for the available editors and click
on an icon.
“Split |” and “Split --”
You can add a view or tab to the window by splitting an existing view or tab.
To perform a vertical split, select “Split |”. This adds a new editor to the right of the
current editor.
To perform a horizontal split, select “Split --”. This adds an editor below the current
editor.
You can also create a split view or tab by clicking its upper left corner and
dragging it to another position in the window.
This creates a copy of the view or tab at the drop position. A colored frame
indicates where it will be inserted when you drop it.
Adjusting the Size of a Split View
To adjust the size of two split views, point the mouse at the divider between these
two, click, and drag.
If a view is split into three or more parts, these parts are resized proportionally. To
resize an individual part, hold down [Ctrl]/[Command] and drag.
Ö Some editors have fixed default sizes for height or width. For example, the Slot Rack
can only be resized vertically but not horizontally.
Create Tab
Select “Create Tab” to create a tab.
You can also create tabs within tabs.
You can also create tabs the following way:
Click in the upper left corner of an existing view or tab and drag it onto another
one.
Click the plus icon to the right of the rightmost tab and click the icon for the editor
you want to display.
Ö If a view contains more tabs than can be displayed, arrow buttons are displayed to
navigate between the tabs.
Renaming Tabs
When you create a tab, it gets the name of the editor it displays. You can rename tabs
via the context menu.
Close
To remove a view or a tab, select Close.
Undock
To create a duplicate of the view or tab in a new window, select Undock.
13
The HALion Control Panel
Setting the Focus
Further Setup Options
Moving Views and Tabs
To move a view or tab, hold down [Shift], click in its upper left corner, and drag it to
another position.
Depending on the drop position, it is added as a tab or as part of a split view.
Expanding and Resizing Editor Sections
Some editors, such as the Options editor, contain expandable sections. These
sections can be resized or collapsed so that they only show their title bar. This helps
you save space and focus on the edited parameters.
To expand or collapse a section, click the “+” or “-” icon on the left of the title bar,
or click the title bar.
To open several sections at the same time, hold down [Ctrl]/[Command] and click
the “+” icon or the title bar.
To resize a section, click in the middle of its lower border (the position is indicated
by a dotted line) and drag up or down.
Setting the Focus
It is useful to know which view, window, or tab has the focus, because this is where
your key commands are applied, for example. The view that has the focus is indicated
by a blue frame.
To set the focus on a specific view, use one of its controls or edit a parameter.
You can also click on the frame of a view or in an empty background of a section.
Working with Multiple Windows
Creating Additional Windows
You can create new windows from existing views using the following methods:
Click in the upper left corner of an existing view or tab and drag it out of the current
window.
Use the Undock command, see “Undock” on page 12.
The window menu bar contains a pop-up menu from which you can select the
program that you want to edit.
14
The HALion Control Panel
Screen Sets
Using Window Presets
HALion comes with several preconfigured window presets. You can open these by
clicking the “Open New Window” button in the top bar and selecting a preset from
the pop-up menu. You can also create your own window presets using the
corresponding commands on the pop-up menu.
Locking Windows
When you open an additional window, HALion shows the settings belonging to the
focused object (program, layer, zone etc.). This way, all editors and separate windows
relate to the same material.
However, in some cases it might be necessary to show different objects in different
windows, for example, to compare the parameter sets of two zones or layers. This can
be achieved by locking a window.
To lock a window, click the lock button in the upper right corner. If this is activated,
the window no longer follows selection and focus changes in the main plug-in
window. Instead, it displays the settings of the program that was selected when
you clicked the lock button.
Screen Sets
When you have set up the HALion control panel to your liking, you can save this
configuration as a “screen set”. This way, you can preconfigure HALion for different
workflows and editing situations.
When you start HALion for the first time, the default screen set is used, which is
optimized for wide-screen monitors and contains all editors.
The following factory screen sets are available:
Managing Screen Sets
You can load, save, and delete screen sets by clicking the screen set button on the
toolbar in the plug-in functions section and selecting the corresponding command
from the pop-up menu.
Ö Factory screen sets cannot be deleted.
Screen Set Recommended
Resolution
Description
Default 1440 x 900 Full editor screen set.
Basic 1024x768 A minimized single slot player view.
Extended1 1280x800 Optimized for laptops.
Extended2 1440 x 900 As Extended 1, but slightly more complex.
Advanced 1440 x 900 Full editor screen set.
15
The HALion Control Panel
Overview of the Available Editors
Overview of the Available Editors
HALion provides a large amount of different editors that give you access to the
parameters of the plug-in and its programs and modules.
The following editors are available:
Slot Rack
Allows you to load and manage the loaded programs, see “The Slot Rack” on page 18.
MIDI
Allows you to configure the ranges and MIDI parameters of the slots, see “The MIDI
Editor” on page 155.
Program Table
Shows all programs that are loaded. This includes the programs that are used in the
Slot Rack as well as those that can be loaded via MIDI program change, see
“Loading
and Managing Programs” on page 30.
Program Tree
Allows you to create programs by combining samples, layers, busses, as well as MIDI
and audio effects, see
“Using the Program Tree” on page 33.
Sound Editor
Gives you access to the parameters of the various program components. It can
display the parameters of programs, layers, zones, MIDI modules, busses, and effects.
Which parameters are displayed depends on the object that is selected in the
Program Tree.
Zone Editor
Allows you to edit the parameters of all zones of the focused layer simultaneously
(including any sublayers).
If zones are selected in the Program Tree or Mapping editor, only these zones can be
modified.
MIDI Modules Editor
Allows you to edit MIDI Modules, see “Using MIDI Modules” on page 63.
16
The HALion Control Panel
Overview of the Available Editors
Macro
This is a content-specific editor that provides a set of the most important program
parameters. Whether such an editor is available for a program, depends on the
content set, see
“Macro Pages” on page 17.
Mapping Editor
Allows you to specify and visualize how samples are distributed over the keyboard and
velocity range, see
“The Mapping Editor” on page 136.
Sample Editor
Allows you to define all sample and loop parameters, see “Editing Samples in the
Sample Editor” on page 144.
Mixer
Allows you to mix the program slots, access the output and AUX busses, and manage
effects, see
“Mixing and Routing” on page 159.
Browser
Allows you to browse and import files, including external sampler formats, see
“Importing and Exporting Samples” on page 66.
MediaBay
Allows you to load programs and layers, see “Managing Files via the MediaBay” on
page 24.
Options
Contains global plug-in settings regarding the overall performance, global edit
functions, and MIDI controllers, see
“The Options Editor” on page 48.
Undo History
Lists all of your actions and allows you to undo changes, see “Undo/Redo on page 46.
Keyboard
Combines a keyboard, two wheels, and the HALion Sphere. You can use these
controls to simulate external hardware, see
“The Keyboard Editor” on page 46.
Quick Controls
Allows you to remote-control any parameter inside the program, see “Quick Controls”
on page 53.
Trigger Pads
Allow you to assign and trigger notes and chords. Furthermore it is possible to use the
trigger pads to switch the states of FlexPhraser modules, see
“The Trigger Pads” on
page 197.
17
The HALion Control Panel
Macro Pages
Macro Pages
VST Sound Instrument Sets provide dedicated editors, so-called Macro pages. These
Macro pages are preconfigured to show the most important parameters for the
specific programs.
Whether it is possible to edit a program only via its Macro page or whether you have
access to all underlying zone and layer parameters depends on the instrument set.
If a program comes with a Macro page, it is displayed when you open the Macro
editor.
When loading a program that contains one or multiple layers with Macro pages, all
Macro pages are shown together in the Macro editor. For each existing Macro page,
HALion inserts a navigation button on the toolbar that allows you to switch between
the different Macro pages.
18
Managing Your Sounds
The Slot Rack
The Slot Rack allows you to load up to 64 programs into so-called slots. Slots are
created dynamically for each loaded program. Their order can be arranged freely,
sorted by MIDI channel, or slot index.
Use the scrollbar to the right of the slots to navigate to the slot that you want to make
settings for.
Changing the Slot Size
You can change the size of the slots that are displayed using the sizing buttons above
the slots. The following options are available:
Showing Empty Slots
By default the Slot Rack only shows slots that are currently filled with programs.
To show all empty slots, activate the “Show Empty Slots” option on the toolbar.
Loading Programs
Programs and layers can be dragged from the following locations into the Slot Rack:
- HALion or Cubase MediaBay
- Program Table or Program Tree
-Import View
- Explorer (Win) or Finder (Mac)
Program Loader
Mute Slot
Solo Slot
MIDI Activity
Indicator
Sort Slots
Remove All Programs
Show Empty Slots
Slot Sizes
Size Features
Small Shows MIDI Indicator, Mute, Solo, Program Loader
Medium Shows MIDI Indicator, Mute, Solo, Program Loader, MIDI Port/Channel,
Level, Pan, Level Meter
Large Shows Instrument Icon, Mute, Solo, Program Loader, MIDI Indicator, MIDI
Port/Channel, Polyphony, Level, Pan, Output, Level Meter
19
Managing Your Sounds
The Slot Rack
Replacing Programs
You can replace the program in a slot by dragging another program or layer onto this
slot.
Alternatively you can use the “Load Program” button at the right of the slot to load a
new program.
Loading Programs in between Slots
If you want to add a program or layer in a new slot between two existing slots, you
can drag it between these slots.
A red line indicates that a slot will be inserted at this position.
Ö The slot number is taken from the first available slot and does not necessarily reflect
the order in which the slots are listed.
Loading Layers into Slots
If you load a layer into a slot, HALion creates a new program.
Managing Programs via the Slot Context Menu
The slot context menu provides additional functions for managing programs. The
following options are available:
Loading Samples and Third-Party Programs
Samples and third-party programs can be loaded into the Slot Rack from a file
browser or the Import editor using drag and drop.
Renaming Programs
You can rename a program via the context menu.
Ö To make the program with its new name available in the MediaBay, you must save it.
Option Description
Load Programs This option opens the “Load Program” dialog. Select a program
or layer and click OK to load it into the slot.
Save Program This option saves the program. Please note that factory content
cannot be overwritten. Instead, the “Save Program” dialog is
opened and you can save the edited program under a new name.
Save Program As… This option opens the “Save Program” dialog where you can
save the edited program under a new name.
Remove Program Select this option to remove the program from the slot.
Revert to Last Saved
Program
Select this option to discard any changes made to the program
in the slot.
Cut Program Select this option to copy and remove the program from the slot.
Copy Program Select this option to copy the program without removing it.
Paste Program Select this option to paste the copied program into the slot. If the
slot already contains a program, it is replaced.
Rename Program Select this option to enter a new name.
Reset Selected Slot Select this option to reset the selected slot to the default values.
Reset All Slots Select this option to reset all slots to the default values.
20
Managing Your Sounds
The Slot Rack
Sorting Modes
By default, slots are arranged freely. New slots are set to the next available index
number.
To change the sorting mode, click the Sort Slots button on the left side of the Slot
Rack toolbar, and choose a mode:
Slot Controls
Depending on the selected slot display size you get access to additional slot controls.
Level
The level fader controls the output level of a program. The parameter has an influence
on all outputs used by layers and zones inside the program.
Pan
Pan controls the stereo position of a program. The parameter has an influence on all
outputs used by layers and zones inside the program.
Ö The Pan control is disabled if the slot bus has a surround configuration.
Solo
Activate the Solo button of a slot in order to hear only the corresponding program.
Several slots can be soloed at the same time.
Mute
Activate the Mute button to turn off playback of the program.
MIDI Port and Channel
Here you can specify on which MIDI port and channel the slot receives MIDI
messages.
MIDI Activity Indicator
A green bar next to the slot number and symbol indicates incoming MIDI data.
Polyphony
Here, you can specify how many notes can be triggered simultaneously.
Ö The number of resulting voices can be much higher if one note triggers several zones
at the same time.
Output
The output selector lets you define to which output bus the slot sends its signal.
Ö This setting does not affect any output routing that has been set up for individual
layers or zones inside the program.
Level Meter
The level meter indicates the signal level of the slot output bus.
Ö Layers and zones inside the program that are routed to individual outputs do not show
any meter activity.
Mode Description
Custom Sorting Default mode.
Sort Slots by MIDI Port and
Channel
Slots are sorted by their MIDI channels. No reordering is
possible. New slots are set to MIDI channel A1.
Sort Slots by Index Slots are sorted by their index-number. No reordering is
possible. New slots are set to the next available index-number.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288
  • Page 289 289
  • Page 290 290
  • Page 291 291
  • Page 292 292
  • Page 293 293
  • Page 294 294
  • Page 295 295
  • Page 296 296
  • Page 297 297
  • Page 298 298
  • Page 299 299
  • Page 300 300
  • Page 301 301
  • Page 302 302
  • Page 303 303
  • Page 304 304
  • Page 305 305
  • Page 306 306
  • Page 307 307
  • Page 308 308
  • Page 309 309
  • Page 310 310
  • Page 311 311
  • Page 312 312
  • Page 313 313
  • Page 314 314
  • Page 315 315
  • Page 316 316
  • Page 317 317
  • Page 318 318
  • Page 319 319
  • Page 320 320
  • Page 321 321
  • Page 322 322
  • Page 323 323
  • Page 324 324
  • Page 325 325
  • Page 326 326
  • Page 327 327
  • Page 328 328
  • Page 329 329
  • Page 330 330
  • Page 331 331
  • Page 332 332
  • Page 333 333
  • Page 334 334
  • Page 335 335
  • Page 336 336
  • Page 337 337
  • Page 338 338
  • Page 339 339
  • Page 340 340
  • Page 341 341
  • Page 342 342
  • Page 343 343
  • Page 344 344
  • Page 345 345
  • Page 346 346
  • Page 347 347
  • Page 348 348
  • Page 349 349
  • Page 350 350
  • Page 351 351
  • Page 352 352
  • Page 353 353
  • Page 354 354
  • Page 355 355
  • Page 356 356
  • Page 357 357
  • Page 358 358
  • Page 359 359
  • Page 360 360
  • Page 361 361
  • Page 362 362
  • Page 363 363
  • Page 364 364
  • Page 365 365
  • Page 366 366
  • Page 367 367
  • Page 368 368
  • Page 369 369
  • Page 370 370
  • Page 371 371
  • Page 372 372
  • Page 373 373
  • Page 374 374
  • Page 375 375
  • Page 376 376
  • Page 377 377
  • Page 378 378
  • Page 379 379
  • Page 380 380
  • Page 381 381
  • Page 382 382
  • Page 383 383
  • Page 384 384
  • Page 385 385
  • Page 386 386
  • Page 387 387
  • Page 388 388
  • Page 389 389
  • Page 390 390
  • Page 391 391
  • Page 392 392
  • Page 393 393
  • Page 394 394
  • Page 395 395
  • Page 396 396
  • Page 397 397
  • Page 398 398
  • Page 399 399
  • Page 400 400
  • Page 401 401
  • Page 402 402
  • Page 403 403
  • Page 404 404
  • Page 405 405
  • Page 406 406
  • Page 407 407
  • Page 408 408
  • Page 409 409
  • Page 410 410
  • Page 411 411
  • Page 412 412
  • Page 413 413
  • Page 414 414
  • Page 415 415
  • Page 416 416
  • Page 417 417
  • Page 418 418
  • Page 419 419
  • Page 420 420
  • Page 421 421
  • Page 422 422
  • Page 423 423
  • Page 424 424
  • Page 425 425
  • Page 426 426
  • Page 427 427
  • Page 428 428
  • Page 429 429
  • Page 430 430
  • Page 431 431
  • Page 432 432
  • Page 433 433
  • Page 434 434
  • Page 435 435
  • Page 436 436
  • Page 437 437
  • Page 438 438
  • Page 439 439
  • Page 440 440
  • Page 441 441
  • Page 442 442
  • Page 443 443
  • Page 444 444
  • Page 445 445
  • Page 446 446
  • Page 447 447
  • Page 448 448
  • Page 449 449
  • Page 450 450
  • Page 451 451
  • Page 452 452
  • Page 453 453
  • Page 454 454
  • Page 455 455
  • Page 456 456
  • Page 457 457
  • Page 458 458
  • Page 459 459
  • Page 460 460
  • Page 461 461
  • Page 462 462
  • Page 463 463
  • Page 464 464
  • Page 465 465
  • Page 466 466
  • Page 467 467
  • Page 468 468
  • Page 469 469
  • Page 470 470
  • Page 471 471
  • Page 472 472
  • Page 473 473
  • Page 474 474
  • Page 475 475
  • Page 476 476
  • Page 477 477
  • Page 478 478
  • Page 479 479
  • Page 480 480
  • Page 481 481
  • Page 482 482
  • Page 483 483
  • Page 484 484
  • Page 485 485
  • Page 486 486
  • Page 487 487
  • Page 488 488
  • Page 489 489
  • Page 490 490
  • Page 491 491
  • Page 492 492
  • Page 493 493
  • Page 494 494
  • Page 495 495
  • Page 496 496
  • Page 497 497
  • Page 498 498
  • Page 499 499
  • Page 500 500
  • Page 501 501
  • Page 502 502
  • Page 503 503
  • Page 504 504
  • Page 505 505
  • Page 506 506
  • Page 507 507
  • Page 508 508
  • Page 509 509
  • Page 510 510
  • Page 511 511
  • Page 512 512
  • Page 513 513
  • Page 514 514
  • Page 515 515
  • Page 516 516
  • Page 517 517
  • Page 518 518
  • Page 519 519
  • Page 520 520
  • Page 521 521
  • Page 522 522
  • Page 523 523
  • Page 524 524
  • Page 525 525
  • Page 526 526
  • Page 527 527
  • Page 528 528
  • Page 529 529
  • Page 530 530
  • Page 531 531
  • Page 532 532
  • Page 533 533
  • Page 534 534
  • Page 535 535
  • Page 536 536
  • Page 537 537
  • Page 538 538
  • Page 539 539
  • Page 540 540
  • Page 541 541
  • Page 542 542
  • Page 543 543
  • Page 544 544
  • Page 545 545
  • Page 546 546
  • Page 547 547
  • Page 548 548
  • Page 549 549
  • Page 550 550
  • Page 551 551
  • Page 552 552
  • Page 553 553
  • Page 554 554
  • Page 555 555
  • Page 556 556
  • Page 557 557
  • Page 558 558
  • Page 559 559
  • Page 560 560
  • Page 561 561
  • Page 562 562
  • Page 563 563
  • Page 564 564
  • Page 565 565
  • Page 566 566
  • Page 567 567
  • Page 568 568
  • Page 569 569
  • Page 570 570
  • Page 571 571
  • Page 572 572
  • Page 573 573
  • Page 574 574
  • Page 575 575
  • Page 576 576
  • Page 577 577
  • Page 578 578
  • Page 579 579
  • Page 580 580
  • Page 581 581
  • Page 582 582
  • Page 583 583
  • Page 584 584
  • Page 585 585
  • Page 586 586
  • Page 587 587
  • Page 588 588
  • Page 589 589
  • Page 590 590
  • Page 591 591
  • Page 592 592
  • Page 593 593
  • Page 594 594
  • Page 595 595
  • Page 596 596
  • Page 597 597
  • Page 598 598
  • Page 599 599
  • Page 600 600
  • Page 601 601
  • Page 602 602
  • Page 603 603
  • Page 604 604
  • Page 605 605
  • Page 606 606
  • Page 607 607
  • Page 608 608
  • Page 609 609
  • Page 610 610
  • Page 611 611
  • Page 612 612
  • Page 613 613
  • Page 614 614
  • Page 615 615
  • Page 616 616
  • Page 617 617
  • Page 618 618
  • Page 619 619
  • Page 620 620
  • Page 621 621
  • Page 622 622
  • Page 623 623
  • Page 624 624
  • Page 625 625
  • Page 626 626
  • Page 627 627
  • Page 628 628
  • Page 629 629
  • Page 630 630
  • Page 631 631
  • Page 632 632
  • Page 633 633
  • Page 634 634
  • Page 635 635
  • Page 636 636
  • Page 637 637
  • Page 638 638
  • Page 639 639
  • Page 640 640
  • Page 641 641
  • Page 642 642
  • Page 643 643
  • Page 644 644
  • Page 645 645
  • Page 646 646
  • Page 647 647
  • Page 648 648
  • Page 649 649
  • Page 650 650
  • Page 651 651
  • Page 652 652
  • Page 653 653
  • Page 654 654
  • Page 655 655
  • Page 656 656
  • Page 657 657
  • Page 658 658
  • Page 659 659
  • Page 660 660
  • Page 661 661
  • Page 662 662
  • Page 663 663
  • Page 664 664
  • Page 665 665
  • Page 666 666
  • Page 667 667
  • Page 668 668
  • Page 669 669
  • Page 670 670
  • Page 671 671
  • Page 672 672
  • Page 673 673
  • Page 674 674
  • Page 675 675
  • Page 676 676
  • Page 677 677
  • Page 678 678
  • Page 679 679
  • Page 680 680
  • Page 681 681
  • Page 682 682
  • Page 683 683
  • Page 684 684
  • Page 685 685
  • Page 686 686
  • Page 687 687
  • Page 688 688
  • Page 689 689
  • Page 690 690
  • Page 691 691
  • Page 692 692
  • Page 693 693
  • Page 694 694
  • Page 695 695
  • Page 696 696
  • Page 697 697
  • Page 698 698
  • Page 699 699
  • Page 700 700
  • Page 701 701
  • Page 702 702
  • Page 703 703
  • Page 704 704
  • Page 705 705
  • Page 706 706
  • Page 707 707
  • Page 708 708
  • Page 709 709
  • Page 710 710
  • Page 711 711
  • Page 712 712
  • Page 713 713
  • Page 714 714
  • Page 715 715
  • Page 716 716
  • Page 717 717
  • Page 718 718
  • Page 719 719
  • Page 720 720
  • Page 721 721
  • Page 722 722
  • Page 723 723
  • Page 724 724
  • Page 725 725
  • Page 726 726
  • Page 727 727
  • Page 728 728
  • Page 729 729
  • Page 730 730
  • Page 731 731
  • Page 732 732
  • Page 733 733
  • Page 734 734
  • Page 735 735
  • Page 736 736
  • Page 737 737
  • Page 738 738
  • Page 739 739
  • Page 740 740
  • Page 741 741
  • Page 742 742
  • Page 743 743
  • Page 744 744
  • Page 745 745
  • Page 746 746
  • Page 747 747
  • Page 748 748
  • Page 749 749
  • Page 750 750
  • Page 751 751
  • Page 752 752
  • Page 753 753
  • Page 754 754
  • Page 755 755
  • Page 756 756
  • Page 757 757
  • Page 758 758
  • Page 759 759
  • Page 760 760
  • Page 761 761
  • Page 762 762
  • Page 763 763
  • Page 764 764
  • Page 765 765
  • Page 766 766
  • Page 767 767
  • Page 768 768
  • Page 769 769
  • Page 770 770
  • Page 771 771
  • Page 772 772
  • Page 773 773
  • Page 774 774
  • Page 775 775
  • Page 776 776
  • Page 777 777
  • Page 778 778
  • Page 779 779
  • Page 780 780
  • Page 781 781
  • Page 782 782
  • Page 783 783
  • Page 784 784
  • Page 785 785
  • Page 786 786
  • Page 787 787
  • Page 788 788
  • Page 789 789
  • Page 790 790
  • Page 791 791
  • Page 792 792
  • Page 793 793
  • Page 794 794
  • Page 795 795
  • Page 796 796
  • Page 797 797
  • Page 798 798
  • Page 799 799
  • Page 800 800
  • Page 801 801
  • Page 802 802
  • Page 803 803
  • Page 804 804
  • Page 805 805
  • Page 806 806
  • Page 807 807
  • Page 808 808
  • Page 809 809
  • Page 810 810
  • Page 811 811
  • Page 812 812
  • Page 813 813
  • Page 814 814
  • Page 815 815
  • Page 816 816
  • Page 817 817
  • Page 818 818
  • Page 819 819
  • Page 820 820
  • Page 821 821
  • Page 822 822
  • Page 823 823
  • Page 824 824
  • Page 825 825
  • Page 826 826
  • Page 827 827
  • Page 828 828
  • Page 829 829
  • Page 830 830
  • Page 831 831
  • Page 832 832
  • Page 833 833
  • Page 834 834
  • Page 835 835
  • Page 836 836
  • Page 837 837
  • Page 838 838
  • Page 839 839
  • Page 840 840
  • Page 841 841
  • Page 842 842
  • Page 843 843
  • Page 844 844
  • Page 845 845
  • Page 846 846
  • Page 847 847
  • Page 848 848
  • Page 849 849
  • Page 850 850
  • Page 851 851
  • Page 852 852
  • Page 853 853
  • Page 854 854
  • Page 855 855
  • Page 856 856
  • Page 857 857
  • Page 858 858
  • Page 859 859
  • Page 860 860
  • Page 861 861
  • Page 862 862
  • Page 863 863
  • Page 864 864
  • Page 865 865
  • Page 866 866
  • Page 867 867
  • Page 868 868
  • Page 869 869
  • Page 870 870
  • Page 871 871
  • Page 872 872
  • Page 873 873
  • Page 874 874
  • Page 875 875
  • Page 876 876
  • Page 877 877
  • Page 878 878
  • Page 879 879
  • Page 880 880
  • Page 881 881
  • Page 882 882
  • Page 883 883
  • Page 884 884
  • Page 885 885
  • Page 886 886
  • Page 887 887
  • Page 888 888
  • Page 889 889
  • Page 890 890
  • Page 891 891
  • Page 892 892
  • Page 893 893
  • Page 894 894
  • Page 895 895
  • Page 896 896
  • Page 897 897
  • Page 898 898
  • Page 899 899
  • Page 900 900
  • Page 901 901
  • Page 902 902
  • Page 903 903
  • Page 904 904
  • Page 905 905
  • Page 906 906
  • Page 907 907
  • Page 908 908
  • Page 909 909
  • Page 910 910
  • Page 911 911
  • Page 912 912
  • Page 913 913
  • Page 914 914
  • Page 915 915
  • Page 916 916

Steinberg HALion 4.0 ユーザーガイド

カテゴリー
ソフトウェア
タイプ
ユーザーガイド