Steinberg VST Instruments Dark Planet 取扱説明書

ブランド: Steinberg

モデル: VST Instruments Dark Planet

タイプ: 取扱説明書

English

Michael Ruf, Matthias Klag

Revision and quality control: Cristina Bachmann, Heiko Bischoff, Marion Bröer, Insa Mingers,

Sabine

Pfeifer, Benjamin Schütte

This PDF provides improved access for vision-impaired users. Please note that due to the complexity

and number of images in this document, it is not possible to include text descriptions of images.

The information in this document is subject to change without notice and does not represent a

commitment on the part of Steinberg Media Technologies GmbH. The software described by this

document is subject to a License Agreement and may not be copied to other media except as

specifically allowed in the License Agreement. No part of this publication may be copied, reproduced,

or otherwise transmitted or recorded, for any purpose, without prior written permission by Steinberg

Media Technologies GmbH. Registered licensees of the product described herein may print one

copy of this document for their personal use.

All product and company names are ™ or ® trademarks of their respective holders. For more

information, please visit www.steinberg.net/trademarks.

Release Date: September 24, 2012

Table of Contents

5 Introduction

5 Loading the VST Sound Instrument Set

5 Loading and Saving Presets

6 Plug-in Controls

6 Plug-in Functions Section

7 Edit Display

7 Options Page

10 Performance Control Section

11 Quick Controls

11 Trigger Pads

13 Macro Page Parameters

13 Editing Programs in HALion and HALion Sonic

13 Automating Parameters

14 Pre/Post-Filter Distortion Sections

15 Filter Section

16 Modulation Effect Section

Introduction

The Dark Planet VST Sound Instrument Set comes with a large number of high-quality

VST Sound presets. These presets can combine up to four layers that can be edited

individually. In your Steinberg DAW, you can load the instrument set as a VST 3 plug-

in. Furthermore, you can load the instrument set as a program in HALion, HALion

Sonic, and HALion Sonic SE.

Loading the VST Sound Instrument Set

• To load the instrument set as a plug-in, open your Steinberg DAW and create an

instrument track that is associated with the instrument set.

• To load the instrument set in HALion, HALion Sonic, or HALion Sonic SE, load any

of the presets that come with Dark Planet.

Ö You can also load the VST Sound Instrument Set in non-Steinberg applications. For

more information, consult the documentation of these applications.

Loading and Saving Presets

When you are working with a Steinberg DAW, the Load and Save dialogs contain

MediaBay functionality, allowing you to make use of tags, for example.

• To load a preset, click the name field in the plug-in functions section and select the

preset in the dialog.

When a preset is loaded, you can step through the available presets using the left

and right arrow buttons to the left of the preset name field.

• To save a preset, click the floppy disk icon to the right of the preset name and

enter a name for the preset.

In a non-Steinberg DAW, you can only save presets in the predefined folder or a

subfolder of this folder. If you save presets using the preset manager of the DAW

that you are using, these presets are only accessible within this DAW and not in

other host applications.

Plug-in Controls

This chapter describes the sections that are available if you open the Dark Planet VST

Sound Instrument Set as a plug-in.

Plug-in Functions Section

The section at the top of the plug-in panel contains global functions that affect both

the currently loaded preset and the general operation of the plug-in.

Preset Controls

With the preset controls on the left, you can load and save presets. To step through

the available presets, use the left and right arrow buttons.

Layer Selector

The layer selector allows you to switch between the available layers.

How many layers are available depends on the preset. The number of layers can only

be modified in HALion or HALion Sonic.

Solo

Solos the selected layer.

Mute

Mutes the selected layer.

Switch Off All Insert FX

Allows you to hear the sound without any effects.

Lock FlexPhraser and Trigger Pads

When you activate this button, loading another preset does not overwrite the current

settings for the Trigger pads.

Ö Some presets use FlexPhrasers, that is, arpeggio or phrase players. These are also

locked when you activate the Lock button.

Plug-in Controls

Edit Display

MIDI Reset

Sometimes, notes can hang. This may be caused by the plug-in losing the MIDI

connection or receiving wrong MIDI controller data. In this case, you can “emergency

reset” the plug-in.

• Click the “MIDI Reset” button (the lightning icon) to send an “All Sound Off” and

“Reset All Controllers” message to the plug-in.

The plug-in immediately stops playback and resets the controllers to their default

values.

Options

Click this button to show the Options page in the edit display. To return to the Macro

page parameters, click the button again.

Meter

Shows the output level of the plug-in.

Main Volume

Adjusts the output level of the plug-in.

Edit Display

The edit display in the center of the plug-in window shows the Macro page that

contains the parameters of the instrument set. The parameters on the Macro page are

described in the chapter

“Macro Page Parameters” on page 13.

If the Options button in the global functions section is activated, the edit display

shows the Options page.

Options Page

On the Options page, you can make settings that control the plug-in behavior. The

settings can affect a single instance or all instances of a given VST Sound Instrument

Set, and even all VST Sound Instrument Sets that are installed on your computer.

Whichever applies is clearly stated in the following sections.

Plug-in Controls

Options Page

Disk Streaming Section

Ö The settings in this section affect all VST Sound Instrument Set plug-ins installed on

your computer, as well as HALion Sonic SE.

Presets can contain a lot of samples which can take up a large amount of data,

especially if you are using several plug-in instances. Therefore, the samples are not

loaded completely into the RAM. Instead, only the first milliseconds of each sample

are loaded. While you play, more manageable portions of the samples are continually

loaded into the RAM from the hard disk. Because the hard disk has to work harder for

every additional note you play, it is a good idea to load as much material as possible

into the RAM beforehand. This leaves less RAM for other applications. For an

optimum performance of your system, you can balance the RAM versus the hard disk

usage.

Balancing Disk vs. RAM

With this slider, you can balance the hard disk versus the RAM usage. This setting is

not saved with the project. It has to be set up only once for your computer system.

• If you need more RAM for other applications, drag the slider to the left towards the

Disk setting.

• If your hard disk is not supplying data fast enough, drag the slider to the right

towards the RAM setting.

Global Section

Polyphony

Here, you can specify how many notes can be played simultaneously before voices

are stolen. Limiting the polyphony can help to keep the required performance within a

reasonable range.

Ö This setting only affects the current plug-in instance.

Master Tune

You can set the Master Tune parameter within the range from 415.3 Hz to 466.2 Hz,

which equals -100 cents to +100 cents.

Ö This setting only affects the current plug-in instance.

Show Tooltips

When this option is activated, a tooltip is displayed when you move the mouse over a

control.

Ö This setting affects all VST Sound Instrument Set plug-ins installed on your computer,

as well as HALion Sonic SE.

Show Value Tooltips

When this option is activated, parameters without a value text field display their value

in a tooltip when using the corresponding control.

Ö This setting affects all VST Sound Instrument Set plug-ins installed on your computer,

as well as HALion Sonic SE.

Plug-in Controls

Options Page

MIDI Controller Section

You can save your customized MIDI controller assignments as default or restore the

factory MIDI controller assignments.

Resetting to Factory Defaults

To restore the factory MIDI controller assignments, click the “Reset to Factory” button.

Ö This setting affects all open plug-in instances of a particular VST Sound Instrument

Set.

Saving as Default

To save the current MIDI controller assignments as default, click the “Save as Default”

button.

Now, each time you load a new instance of the plug-in, your customized MIDI

controller mapping is loaded by default.

Ö This setting affects all open plug-in instances of a particular VST Sound Instrument

Set.

Ö The current MIDI controller mapping is also saved with each project. This way, you

can transfer your settings between different systems.

MIDI Controller Smoothing

MIDI controllers have a maximum resolution of 128 steps, which is rather low.

Therefore, if you use a MIDI controller to remote-control a quick control, for example,

the parameter change may occur in audible steps. To avoid this, the plug-in provides

MIDI controller smoothing, allowing for less abrupt parameter changes.

• If MIDI controller changes cause audible artifacts, turn the control towards slower

settings.

This makes MIDI controller changes occur not immediately, but spaced over a

period of time.

• If you want MIDI controller changes to be more immediate, turn the control

towards faster settings.

This can produce audible artifacts when MIDI controller changes occur.

Ö This setting affects all VST Sound Instrument Set plug-ins installed on your computer,

as well as HALion Sonic SE.

FlexPhraser Hold Reset

This command sends a global “Hold Reset” message to all FlexPhraser modules that

are used in the preset. On the “Reset Controller” pop-up menu, you can assign a MIDI

controller to the FlexPhraser “Hold Reset” button, which allows you to remote-control

it.

Ö This setting affects all open plug-in instances of a particular VST Sound Instrument

Set.

Plug-in Controls

Performance Control Section

The performance control section in the lower part of the plug-in panel contains the

elements that you need to “play” the instrument: pitchbend and modulation wheel,

virtual keyboard, and sphere.

Wheel Controls

To the left of the virtual keyboard, you can find the pitchbend wheel and the

modulation wheel. The modulation wheel is hardwired to MIDI controller #1.

Ö The fixed assignment of MIDI controller #1 cannot be changed. Therefore, the

modulation wheel offers no “Learn CC” function.

Keyboard

The virtual keyboard can be used to trigger MIDI notes just like a real keyboard. By

clicking the keys at different vertical positions you can control the note-on velocity.

Furthermore, the keyboard displays keys that are not used to trigger notes but act as

key switches. The “Shift Keyboard” buttons to the left and right of the keyboard shift

the keyboard range by octaves. This allows you to display key switches that are

located on lower keys, for example.

Sphere H and Sphere V

The sphere is the ball on the right. It is a two-dimensional control, which allows you to

adjust two quick controls simultaneously by dragging the mouse horizontally and

vertically within the sphere. The quick control on the horizontal axis is called Sphere H.

The quick control on the vertical axis is called Sphere V. Typically, two parameters that

belong together are assigned to the sphere. For instance, Cutoff is assigned to

Sphere H and Resonance to Sphere V.

Ö The small triangles for indicating the horizontal and the vertical axis are only available

if parameters are assigned to Sphere H and V.

Center Horizontal/Center Vertical

You can set up the sphere to return to its center position automatically. This can be

defined for each axis separately.

To do so, activate the “Center Horizontal” or “Center Vertical” options on the context

menu for the sphere.

Plug-in Controls

Quick Controls

The eight potentiometer controls on the right are called quick controls. They allow you

to remote-control the most important sound parameters for the preset.

The quick control assignments cannot be modified in the VST Sound Instrument Set.

You can modify the assignments in HALion or HALion Sonic.

Trigger Pads

You can use the trigger pads on the left to remotely trigger single notes or whole

chords. Many of the presets make use of the trigger pads.

• Pads with a colored frame have single notes or whole chords assigned.

• The line above a pad lights up when the pad switches between FlexPhraser

variations.

• To trigger a pad with your mouse, simply click the corresponding pad.

Plug-in Controls

Trigger Pads

Assigning Trigger Notes to Pads

You can assign a MIDI note to a pad and trigger the pad by playing this note.

Proceed as follows:

1. Right-click the pad.

2. From the menu, select “Assign Trigger Note”.

3. From the submenus, select the octave and note that you want to assign.

Or:

1. Right-click the pad.

2. From the context menu, select “Learn Trigger Note”.

3. Play the note on your MIDI keyboard or click the note on the virtual keyboard.

The name of the MIDI note that you assigned as trigger note is displayed in the top

left corner of the pad.

Ö Keys that serve as trigger notes light up in blue on the virtual keyboard. These keys no

longer play sounds, but trigger the corresponding pads.

Removing Trigger Note Assignments

To remove a trigger note from a pad, proceed as follows:

1. Right-click the pad.

2. From the context menu, select “Forget Trigger Note”.

Macro Page Parameters

The Macro page for the Dark Planet VST Sound Instrument Set is divided into four

sections. The top half contains the pre-filter distortion section, the filter section, and

the post-filter distortion section, and the bottom half shows the modulation effect

section.

Editing Programs in HALion and HALion Sonic

In HALion and HALion Sonic, you can also edit program parameters on the regular

Edit page that is available for all programs. The Edit page offers more parameters than

the Macro page and gives you access to all available sound-relevant parameters. For

detailed information about these parameters, see the corresponding documentation.

• In HALion Sonic, you open the Edit page by deactivating the “Show Macro Page”

button.

Automating Parameters

All of the parameters on the Macro page can be automated, except for Pre Distortion

Type, Post Distortion Type, Modulation FX Type, and Modulation FX Bypass.

Macro Page Parameters

Pre/Post-Filter Distortion Sections

The Dark Planet VST Sound Instrument Set contains two distortion effects. The first

effect is placed before the morphing filter and the second effect behind the filter. This

allows you to add distortion to the unfiltered sound, as well as to distort the filtered

signal. You can also use both effects at the same time, for example, to reduce the bit

depth with the pre-filter distortion effect while adding overtones using the post-filter

distortion effect. For both effects, the same set of parameters is available.

On/Off

Activates/deactivates the corresponding distortion effect.

Type

Specifies the type of distortion. The following options are available:

Gain

Adjusts the output level of the sound.

Distortion

This

control

is available when the distortion type is set to Tube or Clip. Turn the knob

clockwise to increase the distortion.

Reduction

This

control

is available when the distortion type is set to Bit or Rate. Turn the knob

counter-clockwise to reduce the bit depth or the sample rate.

Mix

Adjusts the balance between the dry and the distorted signal.

Option Description

Tube Offers a lot of character by adding warm, tube-like distortion. You

can set the amount of tube drive with the Distortion control.

Clip Adds bright, transistor-like distortion. You can set the amount of

clipping with the Distortion control.

Bit

(Bit Reduction)

Adds digital distortion by means of quantization noise. You can

adjust the bit reduction with the Reduction control.

Rate

(Rate Reduction)

Adds digital distortion by means of aliasing. You can adjust the rate

reduction with the Reduction control.

Macro Page Parameters

Filter Section

The filter section lets you mix low-pass and high-pass filter effects, allowing for

creative morphings between two filters. You can specify the filter shapes

independently for filter shape A and B via the corresponding pop-up menus.

Filter Shape B

Here, you can choose between several high-pass and band-reject filter shapes.

Filter Shape A

Here, you can select a low-pass or a band-pass filter shape.

Morph

Adjusts the morphing between filter shapes A and B.

Cutoff

Adjusts the cutoff frequency of the filter.

Ö You can also set the Cutoff and Morph parameters simultaneously by clicking in the

display and dragging.

Resonance

Emphasizes the frequencies around the cutoff frequency. For an electronic sound,

increase the resonance. At higher settings, the filter self-oscillates, which creates a

ringing tone.

Filter shape B

Filter shape A

Cutoff control

Morph control

Macro Page Parameters

Modulation Effect Section

The last effect in the effect chain is the modulation effect.

On/Off

Activates/deactivates the modulation effect.

Type

Determines which modulation effect is used. You can choose between Flanger and

Phaser.

Speed

Specifies the frequency of the pitch modulation.

Depth

Determines the intensity of the modulation.

Phase

Widens the sound image of the effect from mono to stereo.

Feedback

Adds resonances, allowing you to sweep the sound. For the Flanger, this parameter is

bipolar, for the Phaser, it is unipolar.

Mix

Controls the mix between the dry and the wet signal.

•

➯

•

ページが読み込まれています...

Steinberg VST Instruments Dark Planet 取扱説明書

ブランド: Steinberg

モデル: VST Instruments Dark Planet

タイプ: 取扱説明書

PDFをダウンロードします

報告

他の言語で

English: Steinberg VST Instruments Dark Planet Operating instructions

Steinberg VST Instruments Dark Planet 取扱説明書

Steinberg VST Instruments Dark Planet 取扱説明書

他の言語で

関連論文

その他のドキュメント