Danfoss SGP Sight glasses インストールガイド

Danfoss
ブランド
Danfoss
モデル
SGP Sight glasses
タイプ
インストールガイド
Installation guide
014R9572
014R9572
AN220886434888en-000901 | 1
Sight glass
Type SGP X, SGP I, SGP N, SGP RX, SGP RI, SGP RN, SGR, SG, SGN, SGRN
© Danfoss | DSC (Nb) | 2020.02
Media temperature: T
min.
: -50 °C / -58 °F
T
max.
: +80 °C / +175 °F
Max. working Pressure (PS / MWP): SGP: 52 bar / 754 psig
SG: 35 bar / 508 psig
Yellow
Gelb
Jaune
Amarillo
Giallo
黄色
Amarelo
желтый
Green
Grün
Vert
Verde
Verde
綠色
Verde
зеленый
Danfoss
14-210
Refrigerant: SGP (I indicator): R290, R600, R600a
SGP (N indicator): R134a, R22, R32, R404A, R407A, R407C, R407F, R407H, R410A, R448A, R449A, R450A,
R463A, R507, R513A, R515B, R1233zd(E), R1234ze(E), R1234yf, R1270, R744 (CO2 ),
R452A, R452B, R454B, R454C, R455A,
SG (N indicator): R22, R134a, R404A, R407C, R507, R407A, R407F, R448A, R449A, R450A, R452A, R513A
d>22 mm –
7
/
8
in.
Danfoss
14-67.15
Hex 27 mm / 1
1
/
16
in
Hex 32 mm / 1
1
/
4
in
Danfoss
14-47.15
Danfoss
14-50.15
SGP/SG socket max. torque
100 Nm / 74 ft-lbs
With gasket max. torque
50 Nm / 37 ft-lbs
For a fully updated list of approved refrigerants, visit http://store.danfoss.com/ and search for individual code
numbers, where refrigerants are listed as part of product details.
For the application use with R744 as part of a secondary loop or cascade system should refer to the
datasheet for more attentions.
Min. 5% Ag
Danfoss
14-125.12
Dr
y N
2
Max. 80 °C / 175 °F
Type W W
mm in. mm in.
SGP/SG flare 6
14
9
/
16
16
5
/
8
SGP/SG flare 10
19
3
/
4
22
7
/
8
SGP/SG flare 12
22
7
/
8
24
15
/
16
SGP/SG flare 16
27 1
1
/
16
27 1
1
/
16
SGP/SG flare 19
32 1
1
/
4
32 1
1
/
4
Max. torque
Size Nm ft-lbs
1
/
4
in / 6 mm
20 15
3
/
8
in / 10 mm
30 22
1
/
2
in / 12 mm
60 44
5
/
8
in / 16 mm
100 74
3
/
4
in / 19 mm
200 148
AN220886434888en-000901 | 2
Sight glass type SGP X, SGP I, SGP N, SGP RX, SGP RI, SGP RN, SGR, SGI, SGN, SGRN
© Danfoss | DSC (Nb) | 2020.02
SGP flare/face seal/socket without gasket connections are
only approved for A1 and A2L refrigerants. Socket with
gasket connection is only approved for A1 refrigerants.
This product is approved for R290, R32, R452B, R454B,
R454C, R455A, R600, R600a,R1234yf and R1270 by
ignition source assessment in accordance to standard EN
ISO80079-36.
All Danfoss products fulfill the requirements in REACH.
One of the obligations in REACH is to inform customers
about presence of Candidate list substances if any, we
hereby inform you about one substance on the candidate
list:
A moisture indicator in a sight glass contains a paper
which is impregnated with Cobalt Dichloride
(CAS no: 7646-79-9) in a concentration above 0.1% w/w.
If the valve has been damaged or dismantled:
- Avoid skin contact with the paper
- Do not inhale the dust from the paper
- The paper must be disposed as hazardous waste
SGP 螺纹/面密封/不带垫圈的套口型仅能用于A1和A2L
制冷剂。带垫圈的套口型仅能用于A1制冷剂。
根据标准EN ISO80079-36 进行点火源评估，本产
品可用于R290, R32, R452B, R454B, R454C, R455A, R600,
R600a,R1234yf 和 R1270 制冷剂。
所有丹佛斯产品都符合REACH的要求。
REACH中的义务之一是通知客户关于候选清单上物质
的存在，因此我们特此通知您关于在候选名单上的一个
物质:
视液镜中的湿度指示器含有浸着二氯化钴的试纸
(CAS 号:7646-79-9)，其浓度质量比大于0.1%。
如果阀被损坏或拆卸时：
- 避免皮肤与试纸接触
- 不要吸入试纸上的粉尘
- 试纸必须作为危险废物处置
  • Page 1 1
  • Page 2 2

Danfoss SGP Sight glasses インストールガイド

Danfoss
ブランド
Danfoss
モデル
SGP Sight glasses
タイプ
インストールガイド
PDFをダウンロードします
報告

他の言語で

関連論文

その他のドキュメント