Philips BSC431/05 ユーザーマニュアル

࣮ဂߙҔ

أ܃ୃ

࣮ဂߙҔ

أ܃ୃ

BSC431

1

2

4

8

9

3

5

6

7

12

11

10

14

15

16

17

13

1

English 6

简体中文

21

繁體中文

32

한국어

44

English

General description (Fig. 1)

Note: Consult the foldout page at the beginning of the user manual.

Note: Attachments, pouch and brush may differ depending on the

VisaPure type.

1 Handle

2 Charging light and battery low indication

3 Intensity setting indication

-

Intensity setting 1

-

Intensity setting 2

4 On/off button

5 Connection pin

6 Charging pins

7 Anti-roll ridge

8 Anti Pollution Brush head

9 Socket for small plug

10 Protection cap

11 Charging stand

12 Small plug

13 Adapter

14 Travel pouch

15 Storage palette

16 Fresh skin attachment

17 Revitalising Massage head

Important

Read this user manual carefully before you use the appliance and

save it for future reference.

Danger

- Keep the adapter dry.

Warning

- For the purpose of recharging the battery, only use the detachable

supply unit provided with this appliance. Adapter reference

number SSW-2082 or SSW-2600.

- Do not use the appliance, an attachment or the adapter if it is

damaged or broken to avoid injuries.

6

English

- If the adapter is damaged, always have it replaced with one of the

original type in order to avoid a hazard.

- The adapter contains a transformer. Do not cut off the adapter to

replace it with another plug, as this causes a hazardous situation.

- Fully charge the appliance at least every 3 months to sustain

battery lifetime.

- This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a

person responsible for their safety. Children should be supervised

to ensure that they do not play with the appliance.

- Do not insert metal-containing material into the socket for the

small plug to avoid short circuiting.

Caution

-

Do not attempt to replace your VisaPure

Advanced battery. This appliance contains

batteries which are non-replaceable.

-

Only use VisaPure attachments from Philips

as described in this user manual.

-

For hygienic reasons, we advise you to not

share the appliance and the heads with

other people.

-

Do not clean the appliance with water that

is hotter than shower temperature (max.

40°C/104°F).

-

Do not put the appliance or any part in the

dishwasher.

7

English

-

Charge, use and store the appliance at a

temperature between 10°C/50°F and

40°C/104°F.

-

Do not use the appliance on chapped skin,

open wounds, healing wounds, skin

recovering from surgery or if you suffer from

a skin disease or skin irritation, such as

severe acne, sunburn, skin infection, skin

cancer, inflammation, eczema, psoriasis,

nylon allergy etc.

-

Do not use the appliance if you are taking

steroid-based medication.

-

If you wear piercings on your face, remove

the piercings before you use the appliance

or make sure that you do not use the

appliance on or near the piercing.

-

Please make sure that no loose hair gets

trapped in the attachment during use by

wearing a headband, tying your hair or

holding it back with your hands.

8

English

-

If you wear jewelry or glasses, take them off

before you use the appliance, or make sure

that you do not use the appliance on or

near jewelry or glasses.

-

Do not use the appliance with self-made

cleansers, creams, oils or cosmetic products

containing harsh chemicals or rough

particles.

-

Select intensity setting 1 the first few times

you use the appliance or when you use a

new type of attachment. If you do not

experience any skin reactions, you can start

using the appliance at intensity setting 2.

Your skin might need to get used to the new

treatment just like it normally does with a

new skincare product.

-

If your device has intelligent attachments

with NFC tag, please follow the usage

instructions described in their separate

leaflets.

General

-

Do not use the appliance for any other

purpose than described in the user manual.

9

English

-

Cease use if you experience reaction, severe

irritation or pain.

-

Please note that the condition of the skin

varies throughout the year. Facial skin can

get dryer during the winter season. In that

case you can reduce the treatment time or

frequency, depending on the needs of your

skin.

-

Regular cleaning of the appliance ensures

optimal results and a longer life of the

appliance.

-

The appliance complies with the

internationally approved IEC safety

regulations and can be safely used in the

shower and cleaned under the tap.

-

The appliance is equipped with an

automatic voltage selector and is suitable

for mains voltages ranging from 100 to 240

volts.

Electromagnetic fields (EMF)

This Philips device complies with all applicable standards and

regulations regarding exposure to electromagnetic fields.

The intelligent brush heads are equipped with an NFC tag.

10

English

Introduction

Congratulations on your purchase and welcome to Philips! To fully

benefit from the support that Philips offers, register your product at

www.philips.com/welcome.

With VisaPure Advanced you will enjoy a range of benefits to reveal a

radiant, revitalized and refreshed skin. Thanks to Intelligent Head

Recognition, the appliance recognizes which head you put on and

automatically activates a customized DualMotion program, with

dedicated levels of rotation, duration and vibration. This means you

get great skincare results! VisaPure Advanced comes with a diverse

set of heads that can be easily integrated into your skincare routine.

You can use all heads with your current skincare products like

cleansers, creams, oils and serums. This user manual contains usage

instructions for the device and information about the recommended

cleansing process. In the box you find separate leaflets with usage

information and instructions for the other attachments.

Why cleansing?

Cleansing is an essential part of the daily skincare routine. VisaPure

Advanced cleanses your skin better compared to cleansing by hand*.

It cleanses your skin thoroughly and removes dead skin cells and

make-up. Through research we found out that your skincare products

will be absorbed better after you have used VisaPure Advanced.

Therefore your skin feels clean and soft after you used VisaPure

Advanced.

* Internal study performed in the Netherlands in 2015 with 15 women.

Features

Intelligent Head Recognition

VisaPure Advanced has Intelligent Head Recognition. Each

attachment that comes with VisaPure has specific levels of rotation

and vibration. When you attach a different intelligent attachment and

switch on the appliance, it recognizes the intelligent attachment. You

hear 2 beeps and the intensity setting indications flash alternately.

11

English

The device then activates a customized program for the attachment

in use (Fig. 2).

Note: You can find images 2-29 on the last page of this user

manual.

Intensity settings

You can choose between 2 different intensity settings depending on

your personal preference.

- Intensity setting 1 for a gentle treatment (Fig. 3).

- Intensity setting 2 for an intensive treatment.

The first time you use the appliance, we advise you to select intensity

setting 1. If you do not experience any skin reactions, you can start

using the appliance at intensity setting 2.

Note: your skin might need to get used to the new treatment just

like it normally does with a new skincare product.

The intelligent attachments with NFC tag may require other treatment

settings. Consult the separate leaflets of the different attachments for

the advised treatment settings or visit www.philips.com

Skin zone timer

The skin zone timer indicates when you need to move the appliance

to another skin zone. For more information about skin zones, see

chapter 'Using the brush head'.

Using the brush head

You can either use VisaPure Advanced in front of the sink or in the

shower. We advise you to use the brush head in combination with

your favorite cleanser. You can cleanse your face with VisaPure

Advanced twice a day. Other types of attachments may require other

treatment procedures. Consult the separate leaflets of the different

types of attachments for the advised treatment frequencies or visit

www.philips.com/.

12

English

Facial cleansing with VisaPure

Skin zones

The face can be divided into two zones: the U-zone (cheeks, chin and

the area between nose and upper lip) and the T-zone (forehead and

nose). Always treat the zones one by one, in the following order (Fig.

5):

1 Right cheek, chin and area between nose and upper lip

2 Left cheek, chin and area between nose and upper lip

3 Forehead and nose

Cleansing program

The cleansing program consists of 3 treatment periods of 15 to 20

seconds. The exact duration depends on the type of brush head you

have, so please consult the separate leaflets from your attachment

for the advised treatment periods. The treatment periods for VisaPure

Advanced intelligent brush heads are customized and vary from

person to person.

• For optimal performance, start on the right cheek and switch to the

left cheek after 15 - 20 seconds. Use the last 15- 20 seconds to treat

the forehead and nose (Fig. 5).

Tip: You can also use the VisaPure Advanced cleansing brush heads

for cleansing the neck and décolleté.

Note: VisaPure Essential does not have Intelligent Head

Recognition and therefore does not recognize the customized

settings of intelligent attachments.

Note: Do not use the brush head on the sensitive skin area around

the eyes.

Tip: If you want to change the rotation direction of your attachment

after you turned on the appliance, you can hold the button until the

rotation direction changes.

Cleansing procedure

1 Push the brush head onto the connection pin until it locks into

position with a click (Fig. 6).

2 Moisten the brush head with water. Do not use the appliance with

a dry brush head, as this can irritate the skin.

13

English

3 Moisten your face with water and apply a cleanser to your face.

4 Place the brush head on your right cheek.

5 Press the on/off button once to switch on the appliance. The

appliance starts to operate at intensity setting 1. If you want to use

intensity setting 2, press the on/off button twice. Press three times

to switch off the appliance or wait until it switches off

automatically (Fig. 7).

6 Gently move the brush head across your skin from the nose

towards the ear (Fig. 8).

Tip: Do not push the brush head too hard onto the skin to make sure

the treatment remains comfortable.

7 The face can be divided in different zones. The intelligent skin

zone timer lets you know through a short pause when it is time to

move to the next skin zone (Fig. 9).

8 After 15-20 seconds, the appliance pauses briefly to let you know

that you have to move the appliance. Gently move the brush head

from left to right (Fig. 10). The appliance stops automatically after it

has completed the program for the entire face.

Note: We advise you to not overdo the cleansing and to not

cleanse any zone longer than 20 seconds.

9 After the treatment, rinse and dry your face.Your face is now ready

for the next step of your daily skincare routine.

10 Clean the brush head with water and mild soap and allow it to dry

properly.

Cleaning

Never use scouring pads, abrasive cleaning agents or aggressive

liquids such as petrol or acetone to clean the appliance.

Cleaning the appliance and the brush head

Make sure the appliance is switched off before you start cleaning it.

Rinse the appliance and the brush head thoroughly with water and

mild soap after each use, to ensure optimum performance.

1 Rinse the appliance and the brush head under the tap with warm

water and mild soap (Fig. 11) (max. 40ºC/104ºF).

14

English

2 Remove the brush head from the appliance (Fig. 12).

3 Clean the bottom of the brush head and the connection pin of the

appliance under the tap at least once a week (Fig. 13).

4 Dry the brush head and the appliance with a towel.

5 Place the attachment on the storage palette (if you have one) and

leave it to dry.

Cleaning the adapter and the charging stand

Danger: Always keep the adapter dry. Never rinse it

under the tap or immerse it in water.

1 Make sure the adapter is unplugged when you clean it. Only wipe

it with a dry cloth.

2 Always detach the charging stand from the adapter before you

clean it (Fig. 14).

3 You can clean the charging stand with a moist cloth. Dry the

charging stand before you reconnect it to the adapter (Fig. 15).

Charging

Charging the appliance

Note: Charge the appliance before you use it.

Charging the appliance for the first time takes approximately 6 hours.

A fully charged appliance can be used for at least 1 week without

charging, according to the recommended usage per specific

attachment.

1 Make sure the appliance is switched off.

2 Insert the small plug into the socket of the charging stand (Fig. 16).

Put the adapter in the wall socket.

3 Remove the protection cap (Fig. 17).

4 Place the appliance upright into the charging stand, make sure

that it is placed properly (Fig. 18).

5 The charging light flashes white to indicate that the appliance is

charging. When the battery is fully charged, the charging light lights

up white continuously for 30 minutes (Fig. 19).

15

English

Battery-low indication

When the battery is almost empty, the charging light flashes amber.

The battery still contains enough energy for a complete treatment

(Fig. 20). When the battery is completely empty, the battery charge

indicator flashes amber quickly.

Storage

- Store the appliance in the charging stand (Fig. 21).

- To store the appliance horizontally, place it on its anti-roll ridge

(Fig. 22).

- You can store the attachments in the storage palette (Fig. 23)

(specific types only).

-

If you are taking the appliance with you when you travel, put

the protection cap on the dry brush head to protect the brush

head filaments (Fig. 24).

Note: Never put the protection cap on a wet brush head.

Brush head replacement

Damaged brush heads or worn filaments could lead to skin irritation.

To ensure a hygienic skincare routine, we advise to replace the brush

heads every 3 months, or earlier if the filaments are deformed or

damaged. Replacement brush heads are available from our website

www.shop.philips.com or from the shop where you purchased your

Philips VisaPure Advanced. If you have any difficulties obtaining

replacement brush heads, please contact the Philips Consumer Care

Center in your country. You find its contact details in the worldwide

guarantee leaflet. You can also visit www.philips.com/support.

Other attachments

If you like to know more about other types of heads that are available

for specific skincare needs, please visit www.philips.com.cn/c-m-

pe/face-skin for information.

16

English

Recycling

- Do not throw away the product with the normal household waste

at the end of its life, but hand it in at an official collection point for

recycling. By doing this, you help to preserve the environment.

Removing the rechargeable battery

Warning: Only remove the rechargeable battery when you discard the

appliance. Make sure the battery is completely empty when you

remove it.

1 Remove the appliance from the charging stand, switch on the

appliance and let it operate until it switches off after one minute.

Repeat this action until the rechargeable battery is empty.

2 Insert a small flathead screwdriver between the silver-colored ring

and the anti-roll ridge and pry loose the top part of the appliance.

Carefully pull the top part with the battery holder out of the

housing (Fig. 26).

3 Remove the rechargeable battery from the battery holder.

Warning: Do not attempt to replace the rechargeable

battery.

Warning: Do not reconnect the appliance to the wall socket

after you have removed the rechargeable battery.

Warranty and support

If you need information or support, please visit

www.philips.com/support or read the international warranty leaflet.

Troubleshooting

This chapter summarizes the most common problems you could

encounter with the appliance. If you are unable to solve the problem

with the information below, visit www.philips.com/support for a list

of frequently asked questions or contact the Consumer Care Center

in your country.

Problem Solution

17

English

I do not know if

the appliance is

suitable for use

on my skin.

Do not use the appliance on dry, chapped skin,

open wounds, healing wounds, skin recovering

from surgery or if you suffer from a skin disease

or skin irritation, such as severe acne, sunburn,

skin infection, skin cancer, inflammation,

eczema, psoriasis etc. Do not use the appliance

if you are taking steroid-based medication.

The appliance

does not charge.

Consult the chapter ‘Charging the appliance’ for

correct placement into the charging stand. Make

sure the socket to which you connect the

appliance is live. Check whether contact pins on

the appliance are in proper contact with the

contact points in the stand. If you use a socket

in a bathroom cabinet, you may need to switch

on the light to activate the socket. If the charging

light on the appliance still does not light up or if

the appliance still does not charge, take it to

your Philips dealer or the nearest Philips service

center.

The appliance

does not work

anymore.

Make sure that you have pressed the on/off

button properly. Charge the appliance according

to the instructions in this user manual. Verify

whether there is a power failure and if the wall

socket is live. Check if the charging light on the

appliance lights up to make sure the appliance

is charging. If it does not light up or if the

appliance still does not work, take it to your

Philips dealer or the nearest Philips service

center.

I don’t know

which heads I can

use with VisaPure

Advanced.

All standard or intelligent cleansing brush heads,

the Revitalising Massage head and the Fresh

Eyes head can be used with VisaPure Advanced.

To find out more about the range of VisaPure

attachments consult our website

www.shop.philips.com or the shop where you

purchased your Philips VisaPure Advanced. If

you have any difficulties obtaining information

on replacement brush heads, please contact the

Philips Consumer Care Center in your country.

You find its contact details in the international

warranty leaflet. You can also visit

www.philips.com/support.

18

English

The brush head

feels too harsh on

my skin.

If you experience the brush head as too harsh,

we advise you to start using one of the brush

heads specially developed for sensitive or extra

sensitive skin. The Sensitive and Extra Sensitive

brush heads have softer bristles. We

recommend the Sensitive brush head for

sensitive skin and the Extra Sensitive brush

head for extra sensitive and dry skin. For the

best treatment for your sensitive skin, we advise

you to use the Intelligent Sensitive brush head.

Thanks to the NFC tag in the brush head, the

brush is programmed with lower levels of

rotation, vibration and duration that are tailored

to your delicate skin. Enjoy the benefits of a

customized brush head that is adapted to your

needs, with the intensity levels that are right for

your skin.

I don’t know with

which cleansing

products I can

use the brush

head.

We advise you to cleanse your skin with your

favorite cleanser. You can use cleansing gel,

foam, oil, milk or lotions. Please do not use

scrub cream or gel with particles.

Are the Intelligent

heads compatible

with all VisaPure

models?

The Intelligent heads are compatible with all

VisaPure models. However, we recommend to

use them with VisaPure Advanced, as thanks to

the Intelligent head recognition in VisaPure

Advanced, the Intelligent heads will start a

customized cleansing program adjusted to your

skin needs. The Intelligent heads can also be

used on VisaPure Essential, but the program is

similar to the program for standard brushes and

takes the regular 1 minute.

There are no extra benefits if the Intelligent

heads are used on VisaPure Essential.

19

English

What is the

difference

between an

Intelligent head

and a standard

brush head?

The Intelligent heads have a NFC tag

incorporated in it, which makes it possible to

have customized programs for specific skin

types to achieve the best results for your skin

type. Thanks to the Intelligent head recognition

in VisaPure Advanced, the appliance recognizes

the Intelligent head and starts a specific

program with dedicated rotation, vibration and

program settings. The standard brush heads do

not have an incorporated NFC tag, and always

uses the standard 1-minute program.

The Intelligent heads are compatible with all

VisaPure models, but for optimal use we

recommend you to use them with VisaPure

Advanced to achieve the most benefits. The

standard brush head is compatible with both

VPA and VPE. s

20

English

ページが読み込まれています...

Philips BSC431/05 ユーザーマニュアル

Philips BSC431/05 ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント