MGP Z790 EDGE WIFI DDR4 Motherboard

MSI MGP Z790 EDGE WIFI DDR4 Motherboard ユーザーガイド

  • MSI MPG Z790 EDGE WIFI DDR4マザーボードのユーザーマニュアルの内容を読み終えました。このマザーボードの機能、仕様、トラブルシューティングなど、あらゆる質問にお答えできます。例えば、対応プロセッサーの種類、メモリ容量、拡張スロットの種類、無線規格などについてご質問ください。
  • このマザーボードはどの世代のIntelプロセッサーに対応していますか?
    最大搭載可能なメモリの容量は?
    M.2スロットは何個ありますか?
    Wi-Fiは何規格に対応していますか?
MPG Z790 EDGE WIFI DDR4
Motherboard
User Guide
Benutzerhandbuch
Manuel d’utilisation

󱞎󽧃󷱦󳡌󳧉
󻗾󻯻󺿗󻙮
󱀮󵋁󳇟󱏅
󱀮󵋁󳇟󱏇
English
Deutsch
Français

󳠌󳨨󷱆
󼪮󺊿󻬆
󶏛󹢗󰸩󳝖
󵸑󰿨󰸩󳝖
1
Contents
Quick Start..................................................................................................................... 3
Specifications .............................................................................................................. 15
Special Features ......................................................................................................... 20
Package Contents ...................................................................................................... 21
Back Panel Connectors ............................................................................................. 22
LAN Port LED Status Table .................................................................................. 23
Audio Jacks Connection ....................................................................................... 23
Installing Antennas ............................................................................................... 25
Overview of Components ........................................................................................... 26
CPU Socket ........................................................................................................... 27
DIMM Slots ............................................................................................................ 28
PCI_E1~3: PCIe Expansion Slots .......................................................................... 29
M2_1~5: M.2 Slots (Key M) ................................................................................... 29
SATA_1, SATA_5~6, SATA_7~8 & SATA_A1~A2: SATA 6Gb/s Connectors .......... 38
JAUD1: Front Audio Connector ............................................................................ 39
JFP1, JFP2: Front Panel Connectors ................................................................... 39
JDASH1: Tuning Controller Connector ................................................................ 40
JCI1: Chassis Intrusion Connector ....................................................................... 40
CPU_PWR1~2, ATX_PWR1: Power Connectors ................................................... 41
JUSB4: USB 3.2 Gen 2 Type-C
Front Panel
Connector ........................................ 42
JUSB3: USB 3.2 Gen 1 Connector ........................................................................ 42
JUSB1~2: USB 2.0 Connectors ............................................................................. 43
JTPM1: TPM Module Connector ........................................................................... 43
JOC_FS1: Safe Boot Jumper ................................................................................ 44
JTBT1: Thunderbolt Add-on Card Connector ...................................................... 44
CPU_FAN1, PUMP_FAN1, SYS_FAN1~6: Fan Connectors .................................. 45
JBAT1: Clear CMOS (Reset BIOS) Jumper ........................................................... 46
BAT1: CMOS Battery ............................................................................................. 46
JRGB1: RGB LED Connector ................................................................................ 47
JARGB_V2_1~3: A-RAINBOW V2 (ARGB Gen2) LED Connectors ........................ 48
English
2
Onboard LEDs ............................................................................................................. 50
EZ Debug LED ....................................................................................................... 50
JPWRLED1: LED Power Input .............................................................................. 50
LED_SW1: EZ LED Control ................................................................................... 50
Installing OS, Drivers & MSI Center .......................................................................... 51
MSI Center ............................................................................................................ 54
UEFI BIOS .................................................................................................................... 55
BIOS Setup ............................................................................................................ 56
Resetting BIOS ...................................................................................................... 57
Updating BIOS ....................................................................................................... 57
3
Quick Start
Thank you for purchasing a new motherboard from MSI®. This Quick Start section
provides demonstration diagrams about how to install your computer. Some of the
installations also provide video demonstrations. Please link to the URL to watch it
with the web browser on your phone or tablet. You may have even link to the URL by
scanning the QR code.
Preparing Tools and Components
Intel® LGA1700 CPU LGA1700 CPU Fan
DDR4 Memory
Graphics Card
SATA Hard Disk Drive
Phillips Screwdriver
Chassis
Power Supply Unit
A Package of Screws
Thermal Paste
4
Safety Information
The components included in this package are prone to damage from electrostatic
discharge (ESD). Please adhere to the following instructions to ensure successful
computer assembly.
Ensure that all components are securely connected. Loose connections may cause
the computer to not recognize a component or fail to start.
Hold the motherboard by the edges to avoid touching sensitive components.
It is recommended to wear an electrostatic discharge (ESD) wrist strap when
handling the motherboard to prevent electrostatic damage. If an ESD wrist strap
is not available, discharge yourself of static electricity by touching another metal
object before handling the motherboard.
Store the motherboard in an electrostatic shielding container or on an anti-static
pad whenever the motherboard is not installed.
Before turning on the computer, ensure that there are no loose screws or metal
components on the motherboard or anywhere within the computer case.
Do not boot the computer before installation is completed. This could cause
permanent damage to the components as well as injury to the user.
If you need help during any installation step, please consult a certified computer
technician.
Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing any computer component.
Keep this user guide for future reference.
Keep this motherboard away from humidity.
Make sure that your electrical outlet provides the same voltage as is indicated on
the PSU, before connecting the PSU to the electrical outlet.
Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.
All cautions and warnings on the motherboard should be noted.
If any of the following situations arises, get the motherboard checked by service
personnel:
Liquid has penetrated into the computer.
The motherboard has been exposed to moisture.
The motherboard does not work well or you can not get it work according to user
guide.
The motherboard has been dropped and damaged.
The motherboard has obvious sign of breakage.
Do not leave this motherboard in an environment above 60°C (140°F), it may damage
the motherboard.
5
Case stand-off notification
To prevent damage to the motherboard, any unnecessary mounting stand-off between
the motherboard circuits and the computer case is prohibited. The Case standoff keep
out zone signs will be marked on the backside of motherboard (as shown below) to
serve as a warning to user.
Avoid collision notification
Protective paint is printed around each screw hole to prevent parts from being
scratched.
6
Installing a Processor
https://youtu.be/KMf9oIDsGes
11
22
33
66
44
5577
88
99
7
Installing DDR4 memory
https://youtu.be/XiNmkDNZcZk
DIMMA2 DIMMA2
DIMMB2
DIMMA1
DIMMA2
DIMMB1
DIMMB2
8
HDD LED
RESET SW
Connecting the Front Panel Header
http://youtu.be/DPELIdVNZUI
JFP1
HDD LED HDD LED -
HDD LED +
POWER LED -
POWER LED +
POWER LED
RESET SW
POWER SW
POWER LED+
POWER LED-
HDD LED
1
2 10
9
Power LED
Reserved
Power Switch
JFP1
Reset SwitchHDD LED
9
BAT1
Installing the Motherboard
11 https://youtu.be/wWI6Qt51Wnc
Torque:
3 kgf·cm*
*3 kgf·cm
= 0.3 N·m
= 2.6 lbf·in
22
10
Connecting the Power Connectors
http://youtu.be/gkDYyR_83I4
ATX_PWR1
CPU_PWR1~2
11
Installing SATA Drives
http://youtu.be/RZsMpqxythc
11
2233
44
55
12
Installing a Graphics Card
http://youtu.be/mG0GZpr9w_A
11
22
33
44
55
66
13
Connecting Peripheral Devices
14
Power On
44
33
1122
15
Specifications
CPU
Supports 12th/ 13th Gen Intel® Core™ Processors,
Pentium® Gold and Celeron® Processors*
Processor socket LGA1700
* Please go to www.msi.com to get the newest support status as new processors
are released.
Chipset Intel® Z790 Chipset
Memory
4x DDR4 memory slots, supporting up to 128GB*
Supports 1R 2133/2666/3200 MHz (by JEDEC & POR)
Max overclocking frequency:
1DPC 1R Max speed up to 5333+ MHz
1DPC 2R Max speed up to 4800+ MHz
2DPC 1R Max speed up to 4400+ MHz
2DPC 2R Max speed up to 4000+ MHz
Supports Dual-Channel mode
Supports non-ECC, un-buffered memory
Supports Intel® Extreme Memory Profile (XMP)
* Please refer to www.msi.com for more information on compatible memory.
Expansion Slots
2x PCIe x16 slots
PCI_E1 slot (From CPU)
Supports up to PCIe 5.0 x16
PCI_E3 slot (From Z790 Chipset)
Supports up to PCIe 4.0 x4
1x PCIe 3.0 x1 slot
PCI_E2 slot (From Z790 Chipset)
Supports up to PCIe 3.0 x1
Onboard Graphics
1x HDMI™ 2.1 port with HDR, supporting a maximum
resolution of 4K 60Hz*/ **
1x DisplayPort 1.4 port with HBR3, supporting a maximum
resolution of 8K 60Hz*/ **
* Available only on processors featuring integrated graphics.
** Graphics specifications may vary depending on the CPU installed.
SATA Ports
7x SATA 6Gb/s ports
SATA_1, SATA_5~6 & SATA_7~8 (From Z790 chipset)
SATA_A1~A2 (From ASM1061)
Continued on next column
16
Continued from previous column
M.2 SSD Slots
5x M.2 slots (Key M)
M2_1 slot (From CPU)
Supports up to PCIe 4.0 x4
Supports 2260/ 2280/ 22110 storage devices
M2_2 & M2_5 slots (From Z790 chipset)
Supports up to PCIe 4.0 x4
Supports 2260/ 2280 storage devices
M2_3* slot (From Z790 chipset)
Supports up to PCIe 4.0 x4
Supports up to SATA 6Gb/s
Supports 2242/ 2260/ 2280 storage devices
M2_4 slot (From Z790 chipset)
Supports up to PCIe 4.0 x4
Supports 2242/ 2260/ 2280 storage devices
* SATA_1 will be unavailable when installing M.2 SATA SSD in the M2_3 slot.
RAID
Supports RAID 0, RAID 1, RAID 5 and RAID 10 for SATA
storage devices*
Supports RAID 0, RAID 1 , RAID 5 and RAID 10 for M.2
NVMe storage devices
* SATA_A1~A2 do not support RAID function.
Audio
Realtek® ALC4080 Codec
7.1-Channel USB High Performance Audio
Supports up to 32-bit/384kHz playback on front panel
Supports S/PDIF output
LAN 1x Intel® 2.5Gbps LAN controller
Continued on next column
17
Continued from previous column
Wi-Fi & Bluetooth®
Intel® Wi-Fi 6E
The Wireless module is pre-installed in the M.2 (Key-E)
slot
Supports MU-MIMO TX/RX, 2.4GHz/ 5GHz/ 6GHz*(160MHz)
up to 2.4Gbps
Supports 802.11 a/ b/ g/ n/ ac/ ax
Supports Bluetooth® 5.3**, FIPS, FISMA
* The usage of Wi-Fi 6GHz band relies on Windows 11 support and depends on
every country’s regulations.
** The Bluetooth version may be updated, please refer to the Wi-Fi chipset
vendor’s website for details.
Power Connectors 1x 24-pin ATX main power connector
2x 8-pin +12V power connectors
Internal USB
Connectors
1x USB 3.2 Gen 2 10Gbps Type-C front panel connector
(From Z790 chipset)
1x USB 3.2 Gen 1 5Gbps connector (From Hub GL3523)
Supports additional 2 USB 3.2 Gen 1 5Gbps ports
2x USB 2.0 Type-A connectors (From Hub GL850G)
Supports additional 4 USB 2.0 ports
Fan Connectors
1x 4-pin CPU fan connector
1x 4-pin water-pump fan connector
6x 4-pin system fan connectors
System Connectors
1x Front panel audio connector
2x System panel connectors
1x Chassis intrusion connector
1x TPM module connector
1x Tuning controller connector
1x TBT connector (supports RTD3)
Switch 1x EZ LED Control switch
Jumpers 1x Clear CMOS jumper
1x OC safe boot jumper
Continued on next column
18
Continued from previous column
LED Features
1x 4-pin RGB LED connector
3x 3-pin ARGB Gen2 LED connectors
4x EZ Debug LED
1x LED Demo connector
Back Panel
Connectors
1x DisplayPort
1x HDMI™ port
1x Clear CMOS button
1x Flash BIOS button
4x USB 3.2 Gen 1 5Gbps Type-A ports (From Hub GL3523)
4x USB 3.2 Gen 2 10Gbps Type-A ports (From Z790
chipset)
1x USB 3.2 Gen 2 10Gbps Type-C port (From Z790 chipset)
1x USB 3.2 Gen 2x2 20Gbps Type-C port (From Z790
chipset)
1x 2.5Gbps LAN (RJ45) port
2x Wi-Fi antenna connectors
5x Audio jacks
1x Optical S/PDIF Out connector
I/O Controller NUVOTON NCT6687D-M Controller Chip
Hardware Monitor
CPU/ System/ Chipset temperature detection
CPU/ System/ Pump fan speed detection
CPU/ System/ Pump fan speed control
Form Factor ATX Form Factor
9.6 in. x 12 in. (244 mm x 305 mm)
BIOS Features
1x 256 Mb flash
UEFI AMI BIOS
ACPI 6.4, SMBIOS 3.5
Multi-language
Continued on next column
/