Gigabyte AORUS Gen4 7300 SSD 2TB 重要情報

タイプ
重要情報

このマニュアルも適しています

82-P000001496-2
Caution:
Check if the motherboard has an M.2 heatsink or not. If yes, remove it before installing
the SSD.
SSD M.2
1. Remove the screw.
2. Remove the M.2 heatsink.
Be sure to replace the standoff after removing the M.2 heatsink in order to install the SSD.
M.2 SSD
1
2
How to Install the heatsink on a M.2 SSD
Heatsink
(with thermal pad)
Tray
(with thermal pad)
SSD
screws
How to Install the heatsink on a M.2 SSD
Step1: Remove the bottom thermal pad liner and place the SSD in the tray.
Step2: Remove the top thermal pad liner. After that, align the top heatsink
section over the SSD and the tray.
Step3 : Insert 2 screws on each side.
How to remove the heatsink on a M.2 SSD
To remove the heatsink of the SSD, please follow the instruction from step3
to step1.
  • Page 1 1
  • Page 2 2

Gigabyte AORUS Gen4 7300 SSD 2TB 重要情報

タイプ
重要情報
このマニュアルも適しています