DT12N / DT12P
Serial No. 300001
DT512N / DT512P
•
•
•
•
[For U.S.A. and Canada]
THIS CLASS A DIGITAL DEVICE COMPLIES WITH
PART15 OF THE FCC RULES AND THE CANADIAN
ICES-003. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS.
(1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT
MAY CAUSE UNDERSIGNED OPERATION.
CET APPAREIL NUMERIQUE DE LA CLASSE A
EST CONFORME A LA NORME NMB-003 DU
CANADA.
[ For EU and EFTA countries ]
CE Notice
Making by the symbol CE indicates compliance of the
EMC directive of the European Community. Such
marking is indicative meets of exceeds the following
technical standards.
EN 55011 Group 1 Class A / 91 :
"Limits and methods of measurement of
electromagnetic disturbance characteristics of
industrial, scientific and medical (ISM) radio-frequency
equipment"
EN 50082-2 / 95:
"Electromagnetic compatibility - Generic immunity
standard Part 2 : Industrial environment"
Warning
When using this device with equipment governed by
Machine Directives EN 60204-1, measures should be
taken to ensure conformance with those directives.
Warnung
Wenn dieses Gerät mit Ausrüstungsteilen verwendet
wird, die von den Maschinenrichtlinien EN 60204-1
geregelt werden, müssen Maßnahmen ergriffen
werden, um eine Übereinstimmung mit diesen
Normen zu gewährleisten.
1
•10
•
•DT12P DT512P
•DT12N DT512N
•0.05 0.06N.m
2.5
•DT LT10 LT11
•DZ176( ) ( 1)
•
•1 1
•
( )
( )
* FCC
(LT10 LT11 ) 1
RESET
1 2
A
B
LT10 LT11
1
RESET
P
3
2
12
0.005 (LT10 )
0.001 (LT11 )
(1) DT12N DT512N
: 0.9±0.5 N
: 0.8±0.5 N
: 0.7±0.5 N
DT12P, DT512P
1.7 N
(1) DT12N DT12P : 0.01
DT512N DT512P : 0.006
1. 20
2.
•(4) (5)
1. Φ4.2
2. 60.18 0.23N.m
•0.2 /
100
•
•DZ-191
•DZ176 (4)
54
14/0.55"
M3 10/0.39"
1
9/0.35" 8.5/0.33"
ø8
0.31"
+0.01
+0.02
-0.0003
0
/
0.18 0.23N.m
S45C
6
2-M4
2-M4
050
–10 60
2
φ3(M2.5 )
DT12N DT512N : –
DT12P DT512P : IP64
0.08 W
(2) DT12N DT512N : 75
DT12P DT512P : 80
5
......... 1
.................... 1
3
( / )
: DZ176
: CE08-1 (1 )
CE08-3 (3 )
CE08-5 (5 )
CE08-10 (10 )
CE08-15 (15 )
: DZ-100
: DZ-191
10/0.39" 4/0.16"
33/1.30"
15/0.59"
ø4/0.16"
14.5/0.57"
12/0.47"
10.5/0.41"
5/0.20"
(35/1.38")
(35/1.38")
32.6/1.28"
32.6/1.28"
( )
115.7/4.56"
95.7/3.77"
(35/1.38")
32.6/1.28"
11.6/0.46"
ø4.5/0.18"
0
ø8
-0.015
/
-0.0003
0
0.31"
6/0.24" (27/1.06")
<DT12N, DT512N> <DT12P, DT512P>
2-ø4.2/0.17"
: 2 /78.74"
2-ø4.2/0.17"
:
10/0.39"
6/0.24" (27/1.06")
4/0.16"
14.5/0.57"
10.5/0.41"
33/1.30"
5/0.20"
12/0.47"
15/0.59"
115.7/4.56"
95.7/3.77"
( )
(35/1.38")
(35/1.38")
32.6/1.28"
32.6/1.28"
(35/1.38")
32.6/1.28"
11.6/0.46"
ø4.5/0.18"
0.31"
-0.0003
0
ø8
0
/
-0.015
<DZ-191>
ø18/0.71"
15/0.59"
ø5/0.20"
16.5/0.65"5/0.20"
8.5/0.33"
M5 M2.5
3-M3 5
M5
15/0.59"
M2.5
ø12/0.47"
ø10/0.39"
<DZ-100>
2015.1
Printed in Japan
©2009 Magnescale Co., Ltd.
DT12N / DT12P / DT512N / DT512P
2-914-627-1A
45 Suzukawa, Isehara-shi, Kanagawa 259-1146, Japan
For foreign customers
Note: This product (or technology) may be restricted by the government in your country. Please make sure that end-
use, end user and country of destination of this product do not violate your local government regulation.
/